Obtenção e caracterização de um compósito de poliuretano de mamona e pó de vidro para aplicações em insolantes térmicos

Thermal insulation is used to protect the heated or cooled surfaces by the low thermal conductivity materials. The rigid ricin polyurethane foams (PURM) are used for thermal insulation and depend on the type and concentration of blowing agent. Obtaining PURM occurs by the use of polyol, silicone, catalyst and blowing agent are pre -mixed, reacting with the isocyanate. The glass is reusable, returnable and recyclable heat insulating material, whose time of heat dissipation determines the degree of relaxation of its structure; and viscosity determines the conditions for fusion, operating temperatures, annealing, etc. The production of PURM composites with waste glass powder (PV) represents economical and renewable actions of manufacturing of thermal insulating materials. Based on these aspects, the study aimed to produce and characterize the PURM composites with PV, whose the mass percentages were 5, 10, 20, 30, 40 and 50 wt%. PURM was obtained commercially, while the PV was recycled from the tailings of the stoning process of a glassmaking; when the refining process was applied to obtain micrometer particles. The PURM + PV composites were studied taking into account the standard sample of pure PURM and the influence of the percentage of PV in this PURM matrix. The results of the chemical, physical and morphological characterization were discussed taking into account the difference in the microstructural morphology of the PURM+PV composites and the pure PURM, as well the results of the physicochemical, mechanical e thermophysical tests by values obtained of density, hardness, compressive strength, specific heat, thermal conductivity and diffusivity. In general, the structure of pure PURM showed large, elongated and regular pores, while PURM+PV composites showed irregular, small and rounded pores with shapeless cells. This may have contributed to reducing their mechanical strength, especially for PURM - PV50. The hardness and density were found to have a proportional relationship with the PV content on PURM matrix. The specific heat, thermal diffusivity and thermal conductivity showed proportional relationship to each other. So, this has been realized that the increasing the PV content on PURM matrix resulted in the rise of diffusivity and thermal conductivity and the decrease of the specific heat. However, the values obtained by the PURM composites were similar the values of pure PURM, mainly the PURM-PV5 and PURM-PV10. Therefore, these composites can be applied like thermal insulator; furthermore, their use could reduce the production costs and to preserve the environment

Construção e avaliação térmica de um fogão solar tipo caixa

The present work presents a contribution in the study of modelings of transference of heat for foods submitted to the experimental tests in the considered solar oven, where the best modeling for the beefburger of chicken in study was evaluated, comparing the results, considering this food as a half-infinite(1er object considered model) and,after that, considered the chicken beefburger as a plain plate in transient regimen in two distinct conditions: not considering and another model considering the contribution of the generation term, through the Criterion of Pomerantsev. The Sun, beyond life source, is the origin of all the energy forms that the man comes using during its history and can be the reply for the question of the energy supplying in the future, a time that learns to use to advantage in rational way the light that this star constantly special tax on our planet. Shining more than the 5 billion years, it is calculated that the Sun still in them will privilege for others 6 billion years, or either, it is only in the half of its existence and will launch on the Earth, only in this year, 4000 times more energy that we will consume. Front to this reality, would be irrational not to search, by all means technical possible, to use to advantage this clean, ecological and gratuitous power plant. In this dissertation evaluate the performance of solar cooker of the type box. Laboratory of Solar Energy of the Federal University of the Great River of North - UFRN was constructed by the group (LES) a model of solar stove of the type box and was tested its viability technique, considering modeling foods submitted when baking in the solar oven, the cooker has main characteristic the easiness of manufacture and assembly, the low cost (was used material accessible composition to the low income communities) and simplicity in the mechanism of movement of the archetype for incidence of the direct solar light. They had been proposals modeling for calculations of food the minimum baking time, considering the following models of transference of heat in the transient state: object the halfinfinite, plain plate and the model of the sphere to study the necessary temperature for the it bakes of bread (considering spherical geometry). After evaluate the models of transmission of heat will be foods submitted you the processes of to it bakes of, the times gotten for the modeling with the experimental times of it bakes in the solar oven had been compared, demonstrating the modeling that more good that it portraies the accuracies of the results of the model

Incorporação do lodo de tanque séptico como matéria-prima de uma mistura asfáltica

In Natal/RN, 68% of the population uses some kind of individual system for their domestic sewers treatment, being that the most used it is septic tank, followed by sumidouro. Every treatment system of sewers, usually used, generates a by-product denominated sludge. That residue presents some components, in its constitution, undesirable under the environmental and sanitary point of view. In such case, to assure that the system treatment has satisfactory results, it is necessary to do the adjusted disposition of the sludge sewage. Several countries are looking for technical alternatives for the use and disposition of residues. Under technical and environmental conditions appropriate, these materials can be used, decreasing the consumption of the natural resources and the treatment need, storage or elimination of the wastes, what decrease the risks created. Some of the alternatives of recycling of the sludge sewage are: the application in the agriculture, in the production of energy and as raw material in the civil construction. This study evaluated asphalt mixtures behavior that partially substituted conventional aggregates by septic tank sludge. The septic tank sludge gave origin to two raw materials called raw sludge and sludge ash. The raw sludge was put as a small aggregate and the sludge ash as filler. In the first experiment it was made a comparison between the mixture with conventional aggregates and the mixtures that replaced sand by raw sludge in the proportions from 5% to 40%. In the second experiment, it was made comparison between mixtures with 1%, 2% and 3% of sludge ash and cement. The stages developed along the study were: physical characterization of the conventional materials; physical, chemistry, thermal, mineralogical characterizations and analysis of environmental risk of the raw sludge; physical characterization and analysis of environmental risk of the sludge ash; analysis of the mixtures performance through its volumetric and mechanical characteristics; forecast of the mixtures susceptibility in the moisture presence. For the grain size composition used and with the percentage asphalt adopted, the mixtures with up to 7,5% of raw sludge in his composition attend to the National Department of Transports Infrastructure (DNIT) specifications. However, in agreement with the mixtures susceptibility in the moisture presence, the mixtures with addition of raw sludge don't present satisfactory acting. In such case, they could be used in arid and semi-arid areas. The raw sludge application in mixtures increased their voids volume and their stability. However, it damaged mixtures adhesiveness. Mixtures with sludge ash and with cement presented similar behavior. However, mixtures with sludge ash presented a better performance than mixtures with cement as for their stability and their tensile strength ratio. The mixture with 1% of sludge ash is better. The wastes studied don't represent environmental risk

Desenvolvimento de um programa de ensino de Física Térmica para o nível médio

Neste trabalho de mestrado, detemos nossa pesquisa na elaboração e implementação de planos de aula, que pudessem contribuir para estimular a participação e o interesse dos alunos nas aulas de física. Utilizamos como principal recurso didático, textos provenientes da Internet, que proporcionasse aos estudantes acesso a leitura envolvendo conteúdos científicos, tentando amenizar a falta de qualquer forma de material didático de ciências para os alunos. Pudemos constatar também, deficiências por parte dos educandos, em atividades que envolviam leitura e interpretação de textos, o que nos preocupou bastante enquanto educador e nos motivou a provocar mudanças neste quadro. As atividades aqui propostas foram elaboradas e aplicadas numa turma do segundo ano do nível médio, atendendo conteúdos de física térmica mas com um enfoque interdisciplinar. Cada plano de aula proporcionou participação ativa de cada estudante, seja na realização de tarefas solicitadas ou na participação de discussões em sala de aula. Os resultados mais expressivos desta pesquisa foram aumento na participação dos alunos nas atividades fora e dentro da classe e uma mudança na forma de pensar e elaborar soluções para determinados problemas

O ensino por problemas nos livros de química: uma análise do conteúdo estrutura atômica

La enseñanza de problemas se ha investigado en la didáctica de las ciencias naturales como un medio importante para desarrollar el aprendizaje de los conocimientos científicos y la formación de competencias básicas. Dada la importancia de los libros de texto para la enseñanza de la ciencia, con el fin de verificar el enfoque de la enseñanza con problemas en los libros de química, se procedió a una investigación realizada en las obras aprobadas en PNLD 2012, basado en el método de Análisis de Contenido. Se analizó el contenido de la estructura atómica, como marco teórico la perspectiva de la enseñanza problémica, basada en el materialismo histórico y dialéctico. Metodológicamente la investigación presenta un carácter cualitativo. Los resultados del análisis de contenido corroboraron la cuestiones de estudio iniciales relacionadas con la explicación centrándose en los problemas, lo que permitió inferir la elaboración de una Unidad Didactica basada en los métodos problémicos para la enseñanza de los modelos atómicos por la exposición problémica, la conversación heurística y la busca parcial, como forma de aproximar los estudiantes a la naturaleza de las ciencias naturales y contribuir al desarrollo de actitudes positivas en el aprendizaje de la química

Pré-fabricados lingüísticos: estrutura e funcionamento de sintagmas verbais idiomatizados - por uma abordagem cognitivo-funcional em sala de aula

This work aims at under the cognitive-functional perspective describing, inside the vast domain of the linguistic prefabs, the structure and the functioning of the Idiomatic Verb Phrases (SVIs), produced by speakers of the Portuguese from Brazil, located in Natal (RN). From the functionalist presupposition that the language is used essentially to assist to communicative demands, it is observed that its morphologic-syntactic structure is conditioned to the inherent pragmatic vicissitudes to the verbal interaction of subjects, socially heterogeneous and historically established. It is focalized, in the composition of SVIs, the relationships VT + OD (transitive verb + direct object), characterizing the syntactic-semantic nature of the verb and of the respective verbal complement. Those verb combinations + complement can be interpreted as lexical structures, reflexes of the idiomaticity inherent to conventional constructions already systematized in the users' of the language cultural repertoire. It is sought, still, to glimpse the cognitive and discursive motivations pertinent to that linguistic phenomenon. In the investigative process, are analyzed exclusive data of speech collected in Corpus Discurso & Gramática a lingua falada e escrita na cidade do Natal, organized by Furtado da Cunha (1998). The adopted methodological procedures configure as methods of empiric analysis and use of the intuition, being emphasized the qualitative approach (explanatory) of the data with quantitative support of statistical indicators. It shows, finally, a grating of didactic suggestions on SVIs, for Portuguese's classes, as subsidies to the educational practice in the Medium Teaching and in the course of Letters.

Efeito da estrutura etária nas taxas de homicídios em regiões metropolitanas brasileiras (Natal - Recife - São Paulo)

Este estudio examina el fenómeno de asesinato, desde la perspectiva de cambiar la estructura de edad de la zona metropolitana de Natal, Recife y Sao Paulo, utilizando los datos del Sistema de Información de Mortalidad-SIM/DATASUS, del Ministerio de Salud. Se llevaron a cabo ejercicios teóricos estandarización directa con las estructuras de diferentes edades para evaluar el efecto de los cambios en la estructura de la población en las tasas de mortalidad por homicidio. Los resultados presentados en las pirámides de edad y las cartas apuntan a la población de edad avanzada en las tres áreas metropolitanas de la serie analizada, así como las que muestran un mayor riesgo de victimización en las personas, hombres, de edades comprendidas entre 15 y 39 años. Hemos utilizado diversos ejercicios de las tasas de homicidios con patrones estandarizados de distintas edades, incluyendo una población proyectada para el año 2020 de la Región Metropolitana de São Paulo, cada vez más evidente que cuando la población se vuelve más edad con menos gente en los grupos de mayor riesgo tienden a tener menores tasas de muertes por homicidio, también puede presentar otros resultados siempre la misma línea de razonamiento

Deposição de A/N por sputtering não reativo

In this work we deposit via non-reactive magnetron sputtering of radio-frequency nanofilmes of nitreto of aluminum(AlN). The nanofilms aluminum nitride are semiconductors materials with high thermal conductivity, high melting point, piezoelectricity and wide band gap (6, 2 eV) with hexagonal wurtzite crystal structure, belonging to the group of new materials called III-V nitrides in which together with the gallium nitride and indium nitride have attracted much interest because they have physical and chemical properties relevant to new technological applications, mainly in microelectronic and optoelectronic devices. Three groups were deposited with thicknesses nanofilms time dependent on two substrates (glass and silicon) at a temperature of 25 ° C. The nanofilms AlN were characterized using three techniques, X-ray diffraction, Raman spectroscopy and atomic force microscopy (AFM), examined the morphology of these. Through the analysis of X-rays get the thickness of each sample with its corresponding deposition rate. The analysis of X-rays also revealed that nanofilms are not crystalline, showing the amorphous character of the samples. The results obtained by the technique, atomic force microscopy (AFM) agree with those obtained using the technique of X-rays. Characterization by Raman spectroscopy revealed the existence of active modes characteristic of AlN in the samples

Efeitos da interação dipolar na nucleação de vórtices em nano-cilindros magnéticos

The effect of confinement on the magnetic structure of vortices of dipolar coupled ferromagnetic nanoelements is an issue of current interest, not only for academic reasons, but also for the potential impact in a number of promising applications. Most applications, such as nano-oscillators for wireless data transmission, benefit from the possibility of tailoring the vortex core magnetic pattern. We report a theoretical study of vortex nucleation in pairs of coaxial iron and Permalloy cylinders, with diameters ranging from 21nm to 150nm, and 12nm and 21nm thicknesses, separated by a non-magnetic layer. 12nm thick iron and Permalloy isolated (single) cylinders do not hold a vortex, and 21nm isolated cylinders hold a vortex. Our results indicate that one may tailor the magnetic structure of the vortices, and the relative chirality, by selecting the thickness of the non-magnetic spacer and the values of the cylinders diameters and thicknesses. Also, the dipolar interaction may induce vortex formation in pairs of 12nm thick nanocylinders and inhibit the formation of vortices in pairs of 21nm thick nanocylinders. These new phases are formed according to the value of the distance between the cylinderes. Furthermore, we show that the preparation route may control relative chirality and polarity of the vortex pair. For instance: by saturating a pair of Fe 81nm diameter, 21nm thickness cylinders, along the crystalline anisotropy direction, a pair of 36nm core diameter vortices, with same chirality and polarity is prepared. By saturating along the perpendicular direction, one prepares a 30nm diameter core vortex pair, with opposite chirality and opposite polarity. We also present a theoretical discussion of the impact of vortices on the thermal hysteresis of a pair of interface biased elliptical iron nanoelements, separated by an ultrathin nonmagnetic insulating layer. We have found that iron nanoelements exchange coupled to a noncompensated NiO substrate, display thermal hysteresis at room temperature, well below the iron Curie temperature. The thermal hysteresis consists in different sequences of magnetic states in the heating and cooling branches of a thermal loop, and originates in the thermal reduction of the interface field, and on the rearrangements of the magnetic structure at high temperatures, 5 produce by the strong dipolar coupling. The width of the thermal hysteresis varies from 500 K to 100 K for lateral dimensions of 125 nm x 65 nm and 145 nm x 65 nm. We focus on the thermal effects on two particular states: the antiparallel state, which has, at low temperatures, the interface biased nanoelement with the magnetization aligned with the interface field and the second nanoelement aligned opposite to the interface field; and in the parallel state, which has both nanoelements with the magnetization aligned with the interface field at low temperatures. We show that the dipolar interaction leads to enhanced thermal stability of the antiparallel state, and reduces the thermal stability of the parallel state. These states are the key phases in the application of pairs of ferromagnetic nanoelements, separated by a thin insulating layer, for tunneling magnetic memory cells. We have found that for a pair of 125nm x 65nm nanoelements, separated by 1.1nm, and low temperature interface field strength of 5.88kOe, the low temperature state (T = 100K) consists of a pair of nearly parallel buckle-states. This low temperature phase is kept with minor changes up to T= 249 K when the magnetization is reduced to 50% of the low temperature value due to nucleation of a vortex centered around the middle of the free surface nanoelement. By further increasing the temperature, there is another small change in the magnetization due to vortex motion. Apart from minor changes in the vortex position, the high temperature vortex state remains stable, in the cooling branch, down to low temperatures. We note that wide loop thermal hysteresis may pose limits on the design of tunneling magnetic memory cells

Estrutura genética de Chromis multilineata (Guichenot, 1853) (Perciformes Pomacentridae) na costa NE do Brasil e ilhas oceânicas: evidências de um passado evolutivo instável.

The fauna of Brazilian reef fishes comprises approximately 320 species distributed along the coast of the mainland and islands ocean. Little is known about the levels of connectivity between their populations, but has been given the interest in the relations between the offshore and the islands of the Brazil, in a biogeographical perspective. The oceanic islands Brazilian hosting a considerable number of endemic species, which are locally abundant, and divide a substantial portion of its reef fish fauna with the Western Atlantic. Among the richest families of reef fish in species are Pomacentridae. This study analyzed through analysis of sequences of the mitochondrial DNA control region (D-loop), the standards-breeding population of C. Multilineata in different areas of the NE coast of Brazil, involving both oceanic islands (Fernando de Noronha Archipelago and of St. Peter and St. Paul) and continental shelf (RN and BA). To this aim, partial sequences were used in the region HVR1 of mtDNA (312pb). The population structure and parameters for the estimates of genetic variability, molecular variance (AMOVA), estimation of the index for fixing (FST) and number of migrants were determined. The phylogenetic relationships between the populations were estimated using neighbor-joining (NJ) method. A group of Bayesian analysis was used to verify population structure, according to haplotype frequency of each individual. The genetic variability of populations was extremely high. The populations sampled show moderate genetic structure, with a higher degree of genetic divergence being observed for the sample of the Archipelago of St. Peter and St. Paul. At smaller geographical scale, the sample of Rio Grande do Norte and the Archipelago of Fernando de Noronha do not have genetic differentiation. Three moderately differentiated population groups were identified: a population group (I), formed by the Rio Grande do Norte (I') and the archipelago of Fernando de Noronha (I''), and two other different groups formed by the island population of the archipelago of Saint Peter and St. Paul (II) and Bahia (III). The genetic patterns found suggest that the species has suffered a relatively recent radiation favoring the absence of shared haplotypes. C. multilineata seems to constitute a relatively homogenous population along the West Atlantic coast, with evidence of a moderate population genetic structure in relation to the Archipelago of St. Peter and St. Paul. These data supports the importance of the dispersal larvae by marine current and the interpopulation similarity this species.

caracterização in situ e estrutura genética de populações de Gossypium mustelinum

Gossypium mustelinum Miers ex Watt is the only cotton species native from Brazil. It is endemic of the semi-arid region from North-east of the country, where it occur near from resilient water sources. The threats to the in situ conservation of the populations are caused by human interference in its habitat, mainly by excessive cattle graze and deforestation. Establish efficient strategies of in situ conservation depend on the accomplishment of a diagnosis of how the specie is found in its natural environment, and the knowledge about the genetic structure of the populations. The objectives of this work were i) to determine the in situ conditions of two populations present in rivers from basin of Rio Paraguaçu at the Bahia State, ii) to evaluate the structure and genetic variability presented in both populations, iii) to establish in situ and ex situ conservation strategies. It were realized collection in november 2007, when was realized in situ characterization of G. mustelinum. SSR markers were used for analyze 218 genotypes deriving from two populations of the G. mustelinum, localized at Tocó river and the Capivara river. The allelic frequencies, the heterozigosity and the F statics were estimated. All the plants were classified as wild and natives, and there was no evidence of the use the plants or its parts. The populations showed different conservation conditions in situ. Few plantlets were found in sites with excessive cattle feed, an indication that the damages in young plants should be high enough to compromise the renovation of the populations. On the other hand, populations were well preserved when the anthropic damages was low or inexistent. The 14 SSR primer pairs amplified 17 loci with a medium number of 5 alleles per locus (a total of 85 alleles). The high level of endogamy estimated (FIS=0,808) and the low observed heterozygosity (H0=0,093) were indicatives that the populations reproduce mainly by selfing, geitonogamy and crosses between related individuals. The genetic diversity was high (HE=0,482) and the differentiation between the populations was very high (FST=0,328). At least two sites from both populations of G. mustelinum must be preserved to achieve suitable in situ conservation. Actions that preserve the gallery forest and keep the cattle away should implemented, and could be as simple as erecting a fence. It is not possible anticipated if the in situ preservation will be possible. Therefore collections and ex situ preservation of representative specimens are essential to conserve the genetic diversity of native G. mustelinum

Estrutura genética de populações de Amphobotrys ricini, agente causal do mofo cinzento da mamoneira

The gray mold, causal organism Amphobotrys ricini, is one of the major diseases of castor bean. Difficulties in managing plant disease arises form the limited understanding of the genetic structure of A. ricini, their complexity and variability make it difficult to control. Genetic structure can be used to infer the relative impact of different forces that influence the evolution of pathogen populations, that allow to predict the potencial for pathogen populations to envolve in agricultural ecosystems. Growers protect their crop by applying fungicides, but there aren t fungicides to provide significant control of gray mold of castor bean. The objectives of this work were use RAPD to determine the genetic structure of A. ricini subpopulations in Paraíba and assay the sensitivity of A. ricini isolates to azoxystrobin and carbendazim. To determine the genetic structure of A. ricini subpopulations in Paraíba, 23 isolates were colleted from two different geographic location (subpopulation). These isolates were analysed by RAPD using 22 random decamer primers, purchased from OPERON, produced a total of 80 markers polimorphics. The resulting matrixes were analysed using PopGene version 1.32. Sensitivity to azoxystrobin and carbendazim of 30 isolates, colleted form Paraíba and Alagoas, was estimated based on spore germination and colony growth inhibition. The stock solutions were added toV8 medium after sterilization to produce final concentrations of 0, 0.01, 0.1, 1, 10, and 100 µg/ml of carbendazim and 0, 0.001, 0.01, 0.1, 1, and 10 µg/ml of azoxystrobin. All statistical analyses were performed using SAS to estimate the dose that inhibited fungal growth by 50% (ED50 values). The genetic diversity within subpopulations (Hs=0,271) accounted for 92% of the total genetic diversity (Ht=0,293), while genetic diversity between subpopulations (Gst = 0,075) represented only 7,5%. The estimated number of migrants per generation (NM ) was 6,15. Nei s average gene identity across 80 RAPD loci was 0,9468. Individual ED50 values, for the 30 isolates screened for their sensitivity to azoxystrobin, ranged From a maximum of 0,168 µg/ml to a minimum of 0,0036 µg/ml. The ED50 values for carbendazim varied within the range of 0,026 to 0,316 µg/ml

Estrutura do dossel e acúmulo de forragem dos capins piatã e marandu sob pastejo com ovinos

The objective of this scientific work was to evaluate the tillering and mass production of Brachiaria brizantha Piatã and Marandu grasses with two statures of post-grazing. The experimental lineation was in factorial arrangement (2 pastures x 2 residue stature) with subplots (grazing cycle). The experimental period was from March to October of 2012. The target stature on pre-grazing was 50 cm and on post-grazing 15 and 25 for each cultivar. The following variables were analyzed: tiller population density, forage mass, morphological components, accumulation and accumulation rate. Three grazing cycles were obtained. Marandu grass presented larger forage mass on pre-grazing and lower stem production than piatã grass. No difference was observed between the two cultivars regarding the leaf blade production. There was no difference on forage mass, leaf blade, stem, and dead material production between the two statures of post-grazing. The pastures managed at 25 cm presented accumulation rate compared to those with 15 cm. Concerning the accumulation rate on the two cultivars, piatã and marandu grasses, Marandu grass presented higher amount than the piatã grass, and also presented higher values on the rate of basal tiller appearing on 15 cm stature post-pasture feature. Piatã grass managed at 25 cm developed smaller tiller amount on the second generation and greater tiller amount on the third generation than marandu grass. The greater tiller population density was observed on 25cm post-grazing pastures. There was no statistical difference of density between the two cultivars and between the cycles. Accordingly, it is concluded that piatã and marandu cultivars can be managed with 15cm and 25 cm post-grazing statures

Síntese e caracterização de componentes nanoestruturados de células a combustível de óxidos sólidos

Perovskite-like ceramic materials present the general formula ABO3, where A is a rare earth element or an alkaline metal element, and B is a transition metal. These materials are strong candidates to assume the position of cathode in Solid Oxide Fuel Cells (SOFC), because they present thermal stability at elevated temperatures and interesting chemical and physical properties, such as superconductivity, dieletricity, magnetic resistivity, piezoelectricity, catalytic activity and electrocatalytic and optical properties. In this work the cathodes of Solid Oxide Fuel Cells with the perovskite structure of La1-xSrxMnO3 (x = 0.15, 0.22, 0.30) and the electrolyte composed of zirconia-stabilized-yttria were synthesized by the Pechini method. The obtained resins were thermal treatment at 300 ºC for 2h and the obtained precursors were characterized by thermal analysis by DTA and TG / DTG. The powder precursors were calcined at temperatures from 450 to 1350ºC and were analyzed using XRD, FTIR, laser granulometry, XRF, surface area measurement by BET and SEM methods. The pellets were sintered from the powder to the study of bulk density and thermal expansion

Alquilação redutiva da quitosana a partir do glutaraldeído e 3-amino-1-pr

Chitosan derivatives were prepared by reductive alkylation using glutaraldehyde and 3-amino-1-propanol. The reducing agent used was the sodium borohydride. Tests of solubility, stability and viscosity were performed in order to evaluate these parameters effects in the reaction conditions (molar ratio of the reactants and presence of nitrogen in the reaction system). The molecular structure of commercial chitosan was determined by infrared (IR) and hydrogen nuclear magnetic resonance spectroscopy (1H NMR). The intrinsic viscosity and average molecular weight of the chitosan were determined by viscosimetry in 0.3 M acetic acid aqueous solution 0.2 M sodium acetate at 25 ºC. The derivatives of chitosan soluble in aqueous acidic medium were characterized by 1H NMR. The rheological behavior of the chitosan and of the derivative of chitosan (sample QV), which presented the largest viscosity, were studied as a function of polymer concentration, temperature and ionic strength of the medium. The results of characterization of the commercial chitosan (the degree of deacetylation obtained equal 78.45 %) used in this work confirmed a sample of low molar weight (Mv = 3.57 x 104 g/mol) and low viscosity (intrinsic viscosity = 213.56 mL/g). The chemical modification of the chitosan resulted in derivatives with thickening action. The spectra of 1H NMR of the soluble derivatives in acid aqueous medium suggested the presence of hydrophobic groups grafted into chitosan in function of the chemical modification. The solubility of the derivatives of chitosan in 0.25 M acetic acid aqueous solution decreased with increase of the molar ratio of the glutaraldehyde and 3-amino-1-propanol in relation to the chitosan. The presence of nitrogen and larger amount of reducing agent in reaction system contributed to the increase of the solubility, the stability and the viscosity of the systems. The viscosity of the polymeric suspensions in function of the shear rate increased significantly with polymer concentration, suggesting the formation of strong intermolecular associations. The chitosan presented pseudoplastic behavior with the increase in polymer concentration at a low shear rate. The derivative QV presented pseudoplastic behavior at all concentrations used and in a large range of shear rate. The viscosity of chitosan in solution decreased with an increase of the temperature and with the presence of salt. However, there was an increase of the viscosity of the chitosan solution at higher temperature (65 ºC) and ionic strength of the medium which were promoted by hydrophobic associating of the acetamide groups. The solutions of the chitosan derivatives (sample QV) were significantly more viscous than chitosan solution and showed higher thermal stability in the presence of salt as a function of the hydrophobic groups grafted into chitosan backbone