Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Caracterização Microestrutural e Tribocorrosiva de Sistemas Metalocerâmicos Odontológicos do Tipo Ni-Cr/Porcelana E Ni-Cr/Ti/Porcelana

The partial fixed prosthodontics restoration is used to rehabilitate form and function of partial or total compromised teeth, having to remain permanently joined to remainder tooth. The most useful material on prosthodontics is the feldspar porcelain, commercialized as aluminosilicate powders. Dental porcelains are presented with limited mechanical properties to rehabilitate extensive spaces. The association with Ni-Cr metallic systems (metal-ceramic system) allows that the metallic substructure compensates the fragile porcelain nature, preserving the thermal insulation and aesthetics desirable, as well as reducing the possibility of cracking during matication efforts. Cohesive flaws by low mechanical strength connect the metallic substructure to the oral environment, characterized by a electrolytic solution (saliva), by aggressive temperature, pH cyclic changes and mechanical requests. This process results on ionic liberation that could promote allergic or inflammatory responses, and/or clinical degradation of ceramometal system. The aim of this study was to evaluate the presence of an intermediate titanium layer on the microscopic fracture behavior of porcelains on ceramometal systems. Plasma deposition of titanium films result in regular passivating oxide layers which act as barriers to protect the metallic substrate against the hazardous effects of corrosive saliva. Tribocorrosion tests were performed to simulate the oral environment and mechanical stress, making it possible the early detection of crack formation and growth on metal-ceramic systems, which estimate the adherence between the compounds of this system. Plain samples consisting of dental feldspar porcelain deposited either onto metallic substrates or titanium films were fired and characterized by scanning electron microscopy. The result showed that the titanium film improved the adherence of the system compared to conventional metal-ceramic interfaces, thus holding crack propagation

Um framework baseado em modelos para desenvolvimento de sistemas multimídia distribuídos autoadaptativos

Distributed multimedia systems have highly variable characteristics, resulting in new requirements while new technologies become available or in the need for adequacy in accordance with the amount of available resources. So, these systems should provide support for dynamic adaptations in order to adjust their structures and behaviors at runtime. This paper presents an approach to adaptation model-based and proposes a reflective and component-based framework for construction and support of self-adaptive distributed multimedia systems, providing many facilities for the development and evolution of such systems, such as dynamic adaptation. The propose is to keep one or more models to represent the system at runtime, so some external entity can perform an analysis of these models by identifying problems and trying to solve them. These models integrate the reflective meta-level, acting as a system self-representation. The framework defines a meta-model for description of self-adaptive distributed multimedia applications, which can represent components and their relationships, policies for QoS specification and adaptation actions. Additionally, this paper proposes an ADL and architecture for model-based adaptation. As a case study, this paper presents some scenarios to demonstrate the application of the framework in practice, with and without the use of ADL, as well as check some characteristics related to dynamic adaptation

Reengenharia do framework cosmos: uma solução para prover suporte e adaptações abertas.

Self-adaptive software system is able to change its structure and/or behavior at runtime due to changes in their requirements, environment or components. One way to archieve self-adaptation is the use a sequence of actions (known as adaptation plans) which are typically defined at design time. This is the approach adopted by Cosmos - a Framework to support the configuration and management of resources in distributed environments. In order to deal with the variability inherent of self-adaptive systems, such as, the appearance of new components that allow the establishment of configurations that were not envisioned at development time, this dissertation aims to give Cosmos the capability of generating adaptation plans of runtime. In this way, it was necessary to perform a reengineering of the Cosmos Framework in order to allow its integration with a mechanism for the dynamic generation of adaptation plans. In this context, our work has been focused on conducting a reengineering of Cosmos. Among the changes made to in the Cosmos, we can highlight: changes in the metamodel used to represent components and applications, which has been redefined based on an architectural description language. These changes were propagated to the implementation of a new Cosmos prototype, which was then used for developing a case study application for purpose of proof of concept. Another effort undertaken was to make Cosmos more attractive by integrating it with another platform, in the case of this dissertation, the OSGi platform, which is well-known and accepted by the industry

O graben de Palestina: contribuição à estratigrafia e estrutura do estágio rifte na bacia do Araripe, nordeste do Brasil

The Palestina Graben is one of the NE-trending asymmetric grabens of the Araripe Basin. This basin rests on the precambrian terrains of the Transversal Zone, Borborema Province, immediately to the south of the Patos Lineament. It is part of the Interior Basins province of Northeastern Brazil, being related to the fragmentation of the Gondwana supercontinent and the opening of the South Atlantic ocean. The Palestina Graben trends NE-SW and presents an asymmetric geometry, controled by the NW extensional eocretaceous strain. The graben borders display distinct geometries. The SE border is a flexural margin, characterized by the non conformity of the eopaleozoic Mauriti Formation (the oldest unit of the basin) overlying the crystalline basement, but also affected by normal faults with small displacements. On the opposite, the NW border is continuous and rectilinear, being marked by normal faults with major displacements, that control the general tilting of the layers to the NW. In this sense, the Mauriti Formation is overlain by the Brejo Santo, Missão Velha (which also occurs in the Brejo Santo-Mauriti horst, to the NW of the fault border) and Abaiara formations, the latter restricted to the graben. The interpretation of available gravity data and a seismic line indicates that the main fault has a variable dip slip component, defining two deeper portions within the graben, in which the sedimentary column can reach thicknesses of up to 2 km. Regarding to the stratigraphy of Araripe Basin in the study area, the sedimentary package includes three distinct tectonosequences. The Paleozoic Syneclisis Tectonosequence is composed by the Mauriti Formation, deposited by a braided fluvial system. The Jurassic Tectonosequence, whose tectonic setting is still debatable (initial stage of the Neocomian rift, or a pre-rift syneclisis ?), is represented by the Brejo Santo Formation, originated in a distal floodplain related to ephemeral drainages. The Rift Tectonosequence, of neocomian age, includes the Missão Velha Formation, whose lower section is related to a braided to meandering fluvial system, outlining the Rift Initiation Tectonic Systems Tract. The upper section of the Missão Velha Formation is separated from the latter by a major unconformity. This interval was originated by a braided fluvial system, overlain by the Abaiara Formation, a deltaic system fed by a meandering fluvial system. Both sections correspond to the Rift Climax Tectonic Systems Tract. In the area, NE-trending normal to oblique faults are associated with NW transfer faults, while ENE to E-W faults display dominant strike slip kinematics. Both NE and E-W fault sets exhibit clear heritage from the basement structures (in particular, shear zones), which must have been reactivated during the eocretaceous rifting. Faults with EW trends display a dominant sinistral shear sense, commonly found along reactivated segments of the Patos Lineament and satellyte structures. Usually subordinate, dextral directional movements, occur in faults striking NNW to NE. Within this framework bearing to the Palestina Graben, classical models with orthogonal extension or pull-apart style deserve some caution in their application. The Palestina Graben is not limited, in its extremeties, by E-W transcurrent zones (as it should be in the case of the pull-apart geometry), suggesting a model close to the classic style of orthogonal opening. At the same time, others, adjacent depocenters (like the Abaiara-Jenipapeiro semi-graben) display a transtensional style. The control by the basement structures explains such differences

Konect: framework de desenvolvimento para aplicações do Microsoft Kinect

O desenvolvimento para a plataforma Microsoft Kinect (ou simplesmente Kinect) vem se intensificando à medida que o hardware apresenta-se constantemente como parte integrante de soluções para problemas importantes nas áreas de Computação Médica, Realidade Virtual ou mesmo seu propósito básico inicial: a indústria de Entretenimento. Com a sua popularização, as ferramentas básicas de desenvolvimento oferecidas pela Microsoft têm apresentado ao público geral complicações que poderiam ser evitadas, como a correta configuração e inicialização dos recursos oferecidos pelo hardware. Assim, este trabalho tem como objetivo desenvolver e avaliar um framework específico para a plataforma Kinect, que auxilie usuários que estão começando a desenvolver aplicações para essa plataforma, apresentando os principais componentes e como eles foram testados e avaliados pelos usuários. Este trabalho também apresenta uma pesquisa realizada com os jogos mais vendidos e melhores avaliados do Kinect, visando extrarir os principais componentes neles presentes para formar a estrutura do framework.

Avaliação de impactos não esperados: estudo de caso sobre o uso alternativo de crédito no Pronaf B

This Doctoral Dissertation deals with the evaluation of impacts, through the Case Study on deviations or redirects present in contracts Pronaf B, at Governador Mangabeira - BA , from 2011 to 2013. From the questioning about the expected impacts not contribute to the effectiveness of the program ? It was possible the measurement of the hypothesis that the effectiveness of unexpected impacts stems from the logic of family farming, unique socio-economic conditions of individuals and family units. The methodology is structured in the theoretical framework regarding the impact assessment and family farming, data collection, questionnaires among redirected contracting credit in PRONAF B and interviews with institutional actors involved . The results confirmed the existence of a logic family farm, able to take own decisions their mode of reproduction of life. As for the impact assessment, we added the importance of the unexpected in the evaluation of public policy impacts , while study of effectiveness with the beneficiaries and the significant contribution of their views.

Estrutura crustal e mantélica da província Borborema através de funções do receptor e dispersão de ondas superficiais

The Borborema Province, located in northeastern Brazil, has a basement of Precambrian age and a tectonic framework structured at the Neoproterozoic (740-560 Ma). After separation between South America and Africa during the Mesozoic, a rift system was formed, giving rise to a number of marginal and inland basins in the Province. After continental breakup, episodes of volcanism and uplift characterized the evolution of the Province. Plateau uplift was initially related to magmatic underplating of mafic material at the base of the crust, perhaps related to the generation of young continental plugs (45-7 Ma) along the Macau-Queimadas Alignment (MQA), due to a small-scale convection at the continental edge. The goal of this study is to investigate the causes of intra-plate uplift and its relationship to MQA volcanism, by using broadband seismology and integrating our results with independent geophysical and geological studies in the Borborema Province. The investigation of the deep structure of the Province with broadband seismic data includes receiver functions and surface-wave dispersion tomography. Both the receiver functions and surface-wave dispersion tomography are methods that use teleseismic events and allow to develop estimates of crustal parameters such as crustal thickness, Vp/Vs ratio, and S-velocity structure. The seismograms used for the receiver function work were obtained from 52 stations in Northeast Brazil: 16 broadband stations from the RSISNE network (Rede Sismográfica do Nordeste do Brasil), and 21 short-period and 6 broadband stations from the INCT-ET network (Instituto Nacional de Ciência e Tecnologia – Estudos Tectônicos). These results add signifi- cantly to previous datasets collected at individual stations in the Province, which include station RCBR (GSN - Global Seismic Network), stations CAUB and AGBL (Brazilian Lithosphere Seismic Project IAG/USP), and 6 other broadband stations that were part of the Projeto Milênio - Estudos geofísicos e tectônicos na Província Borborema/CNPq. For the surface-wave vii tomography, seismograms recorde at 22 broadband stations were utilized: 16 broadband stations from the RSISNE network and 6 broadband stations from the Milênio project. The new constraints developed in this work include: (i) estimates of crustal thickness and bulk Vp/Vs ratio for each station using receiver functions; (ii) new measurements of surfassewave group velocity, which were integrated to existing measurementes from a continental-scale tomography for South America, and (iii) S-wave velocity models (1D) at various locations in the Borborema Province, developed through the simultaneous inversion of receiver functions and surface-wave dispersion velocities. The results display S-wave velocity structure down to the base of the crust that are consistent with the presence of a 5-7.5 km thick mafic layer. The mafic layer was observed only in the southern portion of the Plateau and absent in its northern portion. Another important observation is that our models divide the plateau into a region of thin crust (northern Plateau) and a region of thick crust (southern Plateau), confirming results from independent refraction surveys and receiver function analyses. Existing models of plateau uplift, nonetheless, cannot explain all the new observations. It is proposed that during the Brazilian orogeny a layer of preexisting mafic material was delaminated, as a whole or in part, from the original Brasiliano crust. Partial delamination would have happened in the southern portion of the plateau, where independent studies found evidence of a more resistant rheology. During Mesozoic rifting, thinning of the crust around the southern Plateau would have formed the marginal basins and the Sertaneja depression, which would have included the northern part of the Plateau. In the Cenozoic, uplift of the northern Plateau would have occurred, resulting in a northern Plateau without mafic material at the base of the crust and a southern Plateau with partially delaminated mafic layer.

Resumo de dissertações e teses: a estrutura composicional à luz da Análise Textual dos Discursos

This doctoral dissertationproposes the description, interpretation and analysis of the compositional structure of thesis and dissertation abstracts, with regard to the linguistic mechanisms that evidence text zones of different typological sequences, such as those of the text plan. Along these lines, the research problem was developed from the notion of compositional structure (sequences and text plans), as one of the levels or plans of text analysis, according to the theoretical framework proposed by Jean-Michel Adam (2011a). The main objective of this study was to recognize how the compositional structure, of thesis and dissertation abstracts, is achieved, with respect to text units and the global organization of this text category. The hypothesis posed in this research posits that specific informational text composition categories of abstracts are necessary to process the representation of the original text and the way in which it makes its meaning. Subsequently, this study is based on the theoretical and methodological framework of Text Linguistics (TL) and, above all, Textual Discourse Analysis (TDA), as we endeavor to understand the organizational structure of abstracts from both a linguistic and textual perspective. This structure involves the text plan of abstracts, with respect to their communicative purpose, i.e, the sharing of scientific information in its standard textual form. Thus, the development of this study, from a theoretical and methodological perspective, is based on the theoretical and descriptive premises from TDA (ADAM, 2011a, 2012; PASSEGGI et al., 2010), and also from TL (BEAUGRANDE; DRESSLER, (2012 [1981]); COSERIU; LAMAS (2010); MARCUSCHI, 2009 [1983]; FÁVERO; KOCH, 1994;KOCH, 2006; BENTES, 2004; BENTES; LEITE, 2010), within the field of text studies. The methodology of this study relies on empirical, documental research, which is qualitative, and adopts a descriptive and interpretive approach. From the empirical perspective, our objective is to understand the problems pertaining to the textual composition of abstracts, aiming to elucidate them in light of the theoretical and methodological framework previously mentioned. The corpus of the analysis is comprised of seven abstracts designated for systematic data collection. These texts, written between 2004 and 2011,were selected from Master’s theses and Doctoral dissertations in their electronic version, from the graduate program at the Federal University of Rio Grande do Norte. A thorough review of the literature reveals a clear fluctuation in the terminology of the concept, ‘abstract’. The results of the analysis revealed that the abstracts, which comprise the corpus of analysis in this study, in general, present typological heterogeneity, while the text plan remains fixed. Finally, the new knowledge gained in this research contributes both to the understanding of the compositional structure of abstracts as well as their production.

Síntese, estrutura e propriedades de polímeros de coordenação à base de íons lantanídeos e ácidos benzenodicarboxílicos

Metal Organic Frameworks (MOFs) are hybrids materials, often crystalline, consisting of metal or metal clusters, connected by polytopic organic ligands repetitively, leading to structures, usually porous. In this work, MOFs based on lanthanide ions (La3+ and Gd3+) and dicarboxylate type of ligands (isophthalic and terephthalic acids), were synthesized by hydrothermal, solvothermal and hydro(solvo)thermal methods. The effects of the synthetic route as well as the type of heating, conventional or by microwave, on the structure and properties of MOFs were studied. The powder samples obtained were characterized by X-ray diffraction, infrared spectroscopy, thermal analysis and scanning electron microscopy. The results suggest that the addition of an organic or inorganic base is needed to promote the deprotonation of the ligand, since in the samples prepared by the hydrothermal method, without the use of a base, no formation of the metalorganic framework was observed. On the other hand, the presence of DMF as solvent or cosolvent, afforded the deprotonation of the ligand with the consequent formation of MOFs. At least two different crystalline structures were identified for the samples prepared with terephthalic acid. These samples are isostructural with those reported for phases Eu(1,3-BDC)DMF, Eu2(1,4-BDC)3 (DMF)2 and Tb(1,4-BDC)H2O. The presence of water in the reaction medium in the hydro(solvo)thermal method, provoked the growth of the structure different from that observed in the absence of water. This can be explained by the difference in the coordination mode of water and DMF to lanthanide ions. Although not identified by XRD, the samples prepared with isophthalic acid, also present metalorganic structures, which was confirmed by the presence of the characteristic displacement of the carbonyl group band in their infrared spectra, compared to the spectrum of the pure ligand. This shift was also observed in the samples prepared with terephthalic acid. Thermal analisys shows that the metal organic frameworks do not collapse occurs at a temperature below 430°C.The analysis of scanning electron microscopy suggests that the morphology of powders is highly dependent on the type of heating used, conventional or by microwave.