Cinema e educação :interfaces, conceitos e práticas docentes

This project goes beyond the interfacial field of cinema, History and education. We take as our object the epistemological potential of the cinema at the educational scenario, specifically the use of films integrated to the practices of History teachers and educative processes in which we have taken part as a builder. Our objective is to map, initially, the knowledge around this use to search a synthesis and its empirical application. From the methodological point of view, we have made use of different perspectives: (a) interviews with the educator subjects; (b) observation of their practices and formative circumstances; (c) filmic analysis and the relation of the cinema s epistemology with the other areas ones (initially History and further Journalism). Our analysis allowed us to portrait the film such as an epistemological-troubling category, what makes the cinema rather a builder technology and not simply a complementary and illustrative technological resource. Therefore, we have realized that the restriction to the cinema s educational function is linked to the restrictions to the theoretical categories to an only interfacial aspect: historical film as a film which portraits the past (at the historical field) and film on journalism as a film which approaches a single object of Journalism (at the journalistic field). These discussions happen, consequently, at the arena of the nature of cinema s genres (fiction and documentary), which are understood in a naïve way, simpler than its epistemological possibilities, boosted at this research when we analyze the confluence between fiction and reality. The reflections on educative practices and in formation related to the cinema had occurred in three empirical realities: research with professors in performance, practices docent s and accompaniment of students of history. Have to do with our personal career as a teacher and researcher and, when analyzed other practices, have become, unavoidably, the subject and object of this project

Consciência corporal e educação física escolar: possibilidades de intervenção

The investigation about the body consciousness in school Physical Education had as main objective reporting a possibility of intervention, linking it directly to the contents of Physical Education and considering it as a crosscutting theme in this research. In this scope, we worked specifically with two contents of Physical Education - knowledge about the body and fights. During the study, we are going to discuss about teaching strategies for the themes of body awareness. To develop this work, we used the following study questions: how is treated the body consciousness in Physical Education and how it has been addressed in educational interventions? What are the difficulties found to the themes of body awareness on different issues of school Physical Education? How body awareness thematized in contents in Physical Education is received by the students and what are the attitudes demonstrated by them during the development of these lessons? Based from questions of study, we used the following methodological tools: participant observation, interviews, photographic records, debates, films, dramatizations and dynamics, which they were performed to stimulate students' critical thinking about their body and the other children s one. The research with ethnographic characteristics was conducted in two schools: one elementary school I, in Natal and one elementary school II, held in the municipality of the João Câmara, in the state of Rio Grande do Norte. We developed a structure in order that the three dimensions of contents conceptual, procedural and attitudinal were experienced by students. The work is structured in five chapters. At first, we made an introduction to justify the motivations that led us to write about body awareness at school. In the second chapter, we discussed reflection about the body and its possibilities of understanding, reflecting on the body and how this awareness was being treated in physical education classes at school. In the third chapter, dealing with the body awareness and dialogue with the Physical Education, we had made a theoretical approach, from authors such as CLARO (1988), NÓBREGA (2000), ARAGÃO (2004), MELO (2006), LORENZETTO and MATTHIESEN (2008) in order to situate the body consciousness and its relationship with physical education. In the fourth chapter, we talked about body awareness thematized in physical education contents: knowledge about the body and fights. We introduced the teaching experience developed in the school and we discussed with authors such as OLIVIER (2000), DARIDO AND RANGEL (2008), among others, about how was the reflection about the body leaving of these experiences. The fifth chapter was intended to closing remarks, in which we concluded that the body awareness, treated in physical education in school by sociocultural and historical aspects, it will contribute in building a man, a body and a society. Although the body consciousness is crafted in a few moments of Physical Education, based on the practices of body awareness or alternatives; in our proposal, we pointed out another perspective to work with body awareness, bringing its elements to permeate and pass through the contents of Physical Education. At work we can see a suggestion for that these experiences are carried out by other Physical Education professionals, obviously adapting the activities according to age and educational level of students

Somos todos canibais: antropofagia, corpo e educação sensível

Cette étude présente l anthropophagie comme une notion théorique et experiementale du corps qui réhabilite le sensible et réveille le monde perçu. L argumentation fait ressortir la dimension sensible du corps et de la connaissance, en considerant sa sensibilité et motricité, corps qui ne se sépare pas de la nature et de l histoire, en actuant dans le monde comme présence vive, originaire, en mouvement ; en supposant un sujet qui, au même temps que construit ses propres senses, il dépend de l expérience de l autre et du monde, en créant et en recréant la culture, et il agrandit le processus de connaître, de sentir, de penser, d agir, d être, de se transformer. Cette attitude annonce une connaissance sensible et un corps qui est suscetible de sensations, mais d expréssions aussi, de communication, de création, aspects indispensables pour se pensar l éducation comme un space sensible, d apprantissage et réssignification de la culture ; que dévient possible la communion avec le corps, le temps, le space ; qu enseigne à réapprendre à voir le monde, que considère la réversibilité des senses et l esthésie comme champs de l expérience sensible et de l imputation des senses ; qu évoque la beauté des multiples léctures du vécu et qu agrandit la compréhension du soi et de l autre. L objectif de ce travail est comprendre l anthropophagie comme une attitude du corps et de la connaisance sensible, qu approfondit la rélation de l être au monde, la rélation avec l autre et permet la création de senses culturelles, ésthetiques et éxistentielles our l éducation. Nos présentons l attitude phénomologique de Maurice Merleau-Ponty comme référence théorique et méthodologique de notre recherche. Il s agit d une attitude de la pensée qui place la conaissance au centre de nos expériences vécues au monde ; une attitude qui ne propose pas un sens définitif des choses et des personnes et qui contribue pour la compréhension de l anthropophagie, du corps, du sensible, du monde et de l autre, en indiquant des développements de ces réflexions pour l éducation. En créant des horizonts de sense et strastégies de pérception sur l anthopophagie, nos considérons comme choix notre expérience vécu, comme les voyages; atelier d extension avec des élèves du cours de Technologie en Production Culturelle de l Institut Fédéral d Éducation, Science et Technologie du Rio Grande do Norte-IFRN, Campus Cidade Alta ; l anthropophagie comme élement de l Art Moderne Brésilien ; les créations et les récits des élèves ; images ; filmes et livres recherchés ; dialogues avec les penseurs Lévi-Strauss, Montaigne et Oswald de Andrade, qui constituent nos principales références conceptuelles et qui ont permis traversé des savoirs et promouvoir un dialogue entre divers champs de connaissance, comme l Anthropologie, la Philosophie, l Art et l Éducation. Ces stratégies constituent le resultat partiel et inachevé d un processus de connaisance de soi et de l autre, que permet de revivre des mémoires, faire ressortir des couleurs, des senses, des goûts, des découvertes sensibles et encourageantes sur la connaissance, sur l art, des découvertes sur soi même, sur l autre, sur le monde, sur la vie, indiquant que l éducation peut être un processus fort sensible, dans lequel le corps est une présence indispensable, aussi comme le toucher, le créer, les delires, les affections, les encontres et l invention

Esporte como experiência estética e educativaEsporte educativa: uma abordagem fenomenológica

This paper deals with sport as a possibility of disclosing the sensible, and defends the idea that being a sportsperson equals living an aesthetic and educative experience in which one can interacts with the sensible by the athletic body s reverberation of sensations in the dimension of the experienced. We try to answer, in our work, basically three questions: what moves the athlete when practicing a sport? Which are the meanings and motivations for the practice of sports? At what measure the athlete s experience gains an educational character? Sport is debated in this work as an extension of the living, as long as it tries to understand the meanings inherent to sport itself as well as to the sportive experience as a kind of education. In support of our argument, we give a theoretic and philosophical approach to our thesis, based on thinkers like Maurice Merleau-Ponty, Walter Benjamin, Marcel Mauss and Friedrich Schiller. For this purpose, we get support on the phenomenology of the French philosopher Maurice Merleau-Ponty. Our reference is the living world of the athlete and his experience as a field of the sensible. Our point of departure is the analysis of the narratives of sport experiences, including five aesthetic elements; time and space of the body in the sports courts; the look on the sportive context; the contact with the adversary; victory and defeat; the technical gesture. Besides it, we worked out an aesthetic evaluation of the movies Olympia and Invictus , what let us discuss three thematic categories: sensibility, emotions and the play paradox. Subsequently, we point sport as an optimizer of the sensible education, present on the body s processes, like the body in movement. It was also made clear along this paper that we tried to accomplish an analysis on sports centered in the athlete s body as an outfit of the senses to things related to the sensible, whose aesthetic experience overpasses any deterministic conception that should sum up the sportive world to mercantilization, discipline practices and mechanicism. This approach franchises gateways to a Physical Education which, containing sports as one of its support, let pupils enjoy the pleasure of constructing common objectives, incorporating the capacity of replicating, re-making and playing as a field of possibilities offered by an education characterized as being moving, sensible and fitful to a body in movement

Capacidade de absorção de energia de tubos de compósitos submetidos à compressão

Structures capable of absorbing large amounts of energy are of great interest, particularly for the automotive and aviation industries, to reduce tbe impact on passengers in the case of a collision. The energy absorption properties of composite materials structures can be tailored, thus making these structures an appealing option a substitute of more traditional structures in applications where energy absorption is crucial. ln this research, the influence of some parameters, which affect the energy absorption capacity of composite material tubes, was investigated. The tubes were fabricated by hand lay-up, using orthophthalic polyester resin and a plain weave E-glass fabric Test specimens were prepared and tested under compression load. The ínfluence of the following parameters on the specific energy absorption capacity of the tubes was studied: fiber configuration (0/90º or ± 45°), tube cross-section (circular or square), and processing conditions (with or without vacuum). The results indicated that circular cross-section tubes with fibers oriented at 0/90º presented the highest level of specific energy absorbed. Further, specimens from tubes fabricated under vacuum displayed higher energy absorption capacity, when compared with specimens from tubes fabricated without vacuum. Thus, it can be concluded that the fabrication process with vacuum produce composite structures with better energy absorption capacity

Estudo da oxidação superficial de ligas odontológicas de Ni-Cr em plasma pulsado para uso em restaurações metalocerâmicas

Metal ceramic restorations matches aesthetic and strength, and in your making occurs an interface oxide layer, wetting resulting and atomic and ionic interactions resulting between metal, oxide and porcelain. However, frequent clinical fails occurs in this restoration type, because lost homogeneous deposition oxide layer and lost interface bond. Thus, in this study, thought depositate homogeneous oxide films above Ni-Cr samples surfaces polite previously, at plasma oxide environment. Six samples was oxided at 300 and 400ºC at one hour, and two samples was oxided in a comum chamber at 900ºC, and then were characterized: optical microscopic, electronic microscopic, micro hardness, and X ray difratometry. Colors stripes were observed at six samples plasma oxided and a grey surface those comum oxided, thus like: hardness increase, and several oxides from basic metals (Ni-Cr)

Obtenção de compósitos cerâmicos baseados em Al2O3/TiC através dos precursores poliméricos

The obtaining of ceramic materials from polymeric precursors is subject of numerous studies due to lower energy costs compared to conventional processing. The aim of this study is to investigate and improve the mechanism for obtaining ceramic matrix composite (CMC) based on SiOC/Al2O3/TiC by pyrolysis of polysiloxane in the presence of an active filler and inert filler in the pyrolysis temperature lower than the usually adopted for this technique, with greater strength. It also investigates the influence of pyrolysis temperature, the content of Alas active filler, the presence of infiltrating agents (Al, glass and polymer) after pyrolysis, temperature and infiltration time on some physical and mechanical properties. Alumina is used as inert filler and Al and Ti as active filler in the pyrolysis. Aluminum, glass and polysiloxane are used as agents infiltrating the post-pyrolysis. The results are analyzed with respect to porosity and bulk density by the Archimedes method, the presence of crystalline phases by X-ray diffraction (XRD) and microstructure by scanning electron microscopy (SEM). The ceramic pyrolyzed between 850 °C 1400 °C contain porosity 15% to 33%, density 2.34 g/cm3 and flexural strength at 4 points from 30 to 42 MPa. The microstructure features are porous, with an array of Al2O3 reinforced by TiC particles and AlTi3. The infiltration post-pyrolysis reveals decrease in porosity and increase density and strength. The composites have potential applications where thermal stability is the main requirement

Metalização mecânica de ZrO2 com Ti para brasagem ZrO2/Aço com ligas de adição sem metal ativo

Metal/ceramic interfaces using zirconia have dominated the industrial applications in the last decade, due to the high mechanical strength and fracture toughness of zirconia, especially at temperatures below 300 ºC. Also noteworthy is the good ionic conductivity in high temperatures of this component. In this work joining between ZrO2 Y-TZP and ZrO2 Mg-PSZ with austenitic stainless steel was studied. These joints were brazed at high-vacuum after mechanical metallization with Ti using filler alloys composed by Ag-Cu and Ag-Cu-Ni. The influence of the metallization, and the affinity between the different groups (ceramic / filler alloys) was evaluated, in order to achieve strong metal/ceramic joints. Evaluation of joints and interfaces, also the characterization of base materials was implemented using various techniques, such as: x-ray diffraction, leak test, three-point flexural test and scanning electron microscopy with chemical analysis. The microstructural analysis revealed physical and chemical bonds in the metal/ceramic interfaces, providing superior leak proof joints and stress cracking, in order to a good joint in all brazed samples. Precipitation zones and reaction layers with eutetic characteristics were observed between the steel and the filler metal

Eletrofiação e caracterização de membranas biopoliméricas a base de quitosana extraídas dos exoesqueletos de crustáceos

Chitin and chitosan are nontoxic, biodegradable and biocompatible polymers produced by renewable natural sources with applications in diverse areas such as: agriculture, textile, pharmaceutical, cosmetics and biomaterials, such as gels, films and other polymeric membranes. Both have attracted greater interest of scientists and researchers as functional polymeric materials. In this context, the objective of this study was to take advantage of the waste of shrimp (Litopenaeus vannamei and Aristeus antennatus) and crabs (Ucides cordatus) from fairs, beach huts and restaurant in Natal/RN for the extraction of chitin and chitosan for the production of membranes by electrospinning process. The extraction was made through demineralization, deproteinization, deodorization and deacetylation. Morphological analyzes (SEM and XRD), Thermal analysis (TG and DTG), Spectroscopy in the Region of the Infrared with Transformed of Fourier (FTIR) analysis Calorimetry Differential Scanning (DSC) and mechanical tests for traction were performed. In (XRD) the semicrystalline structure of chitosan can be verified while the chitin had higher crystallinity. In the thermal analysis showed a dehydration process followed by decomposition, with similar behavior of carbonized material. Chitosan showed temperature of maximum degradation lower than chitin. In the analysis by Differential Scanning Calorimetry (DSC) the curves were coherent to the thermal events of the chitosan membranes. The results obtained with (DD) for chitosan extracted from Litopenaeus vannamei and Aristeus antennatus shrimp were (80.36 and 71.00%) and Ucides cordatus crabs was 74.65%. It can be observed that, with 70:30 solutions (v/v) (TFA/DCM), 60 and 90% CH3COOH, occurred better facilitate the formation of membranes, while 100:00 (v/v) (TFA/DCM) had formation of agglomerates. In relation to the monofilaments diameters of the chitosan membranes, it was noted that the capillary-collector distance of 10 cm and tensions of 25 and 30 kV contributed to the reduction of the diameters of membranes. It was found that the Young s modulus decreases with increasing concentration of chitosan in the membranes. 90% CH3COOH contributed to the increase in the deformation resulting in more flexible material. The membranes with 5% chitosan 70:30 (v/v) (TFA/DCM) had higher tensile strength

Análise da influência de superfícies refletivas nas perdas de calor de sistema térmicos

The use of reflective surfaces functioning as thermal insulator has grown significantly over the years. Reflective thermal insulator are materials that have several characteristics such as low emissivity, low absorptivity and high reflectivity in the infrared spectrum. The use of these materials has grown a lot lately, since it contains several important radioactive properties that minimize the heat loss of thermal systems and cooling systems that are used to block the heat on the roof of buildings. A system made of three surfaces of 316 stainless steel mirror was built to analyze the influence of reflective surfaces as a way to reduce the heat loss and thereby conserve the energy of a thermal system. The system was analyzed both with and without the presence of vacuum, and then compared with a system that contained glass wool between the stainless steel mirror walls, since this isolator is considered resistive and also broadly used around the world in thermal systems. The reflectivity and emissivity of the surfaces used were also measured in this experiment. A type K thermocouple was fixed on the wall of the system to obtain the temperature of the stainless steel mirror surfaces and to analyze the thermal behavior of each configuration used. The results showed an efficiency of 13% when the reflective surfaces were used to minimize the heat loss of the thermal system. However, the system with vacuum had the best outcome, a 60% efficiency. Both of these were compared to the system made of glass wool as a thermal insulator

Análise da lubricidade do biodiesel brasileiro de ésteres etílicos de soja e girassol

Fuel is a material used to produce heat or power by burning, and lubricity is the capacity for reducing friction. The aim of this work is evaluate the lubricity of eight fossil and renewable fuels used in Diesel engines, by means of a HFRR tester, following the ASTM D 6079-04 Standard. In this conception, a sphere of AISI 52100 steel (diameter of 6,000,05 mm, Ra 0,050,005 μm, E = 210 GPa, HRC 624, HV0,2 63147) is submitted to a reciprocating motion under a normal load of 2 N and 50 Hz frequency to promote a wear track length of 1.10.1mm in a plan disc of AISI 52100 steel (HV0,05 18410, Ra 0,020,005 μm). The testing extent time was 75 minutes, 225,000 cycles. Each one test was repeated six times to furnish the results, by means of intrinsic signatures from the signals of the lubricant film percentage, friction coefficient, contact heating, Sound Pressure Level, SPL [dB]. These signal signatures were obtained by two thermocouples and a portable decibelmeter coupled to a data acquisition system and to the HFRR system. The wettability of droplet of the diesel fuel in thermal equilibrium on a horizontal surface of a virgin plan disc of 52100 steel, Ra 0,02  0,005 μm, were measured by its contact angle of 7,0  3,5o, while the results obtained for the biodiesel B5, B20 and B100 blends originated by the ethylic transesterification of soybean oil were, respectively, 7,5  3,5o, 13,5  3,5o e 19,0  1,0o; for the distilled water, 78,0  6,0o; the biodiesel B5, B20 and B100 blends originated by the ethylic transesterification of sunflower oil were, respectively, 7,0  4,0o, 8,5  4,5o e 19,5  2,5o. Different thickness of lubricant film were formed and measured by their percentage by means of the contact resistance technique, suggesting several regimes, since the boundary until the hydrodynamic lubrication. All oils analyzed in this study promoted the ball wear scars with diameters smaller than 400 μm. The lowest values were observed in the scar balls lubricated by mixtures B100, B20 and B5 of sunflower and B20 and B5 of soybean oils (WSD < 215 μm)

Síntese citrato-hidrotermal e caracterização eletroquímica de LSCF para aplicação como catodo em célula a combustível de temperatura intermediária

The lanthanum strontium cobalt iron oxide (La1-xSrxCo1-yFeyO3 LSCF) is the most commonly used material for application as cathode in Solid Oxide Fuel Cells (SOFCs), mainly due to their high mixed ionic electronic conductivity between 600 and 800ºC. In this study, LSCF powders with different compositions were synthesized via a combination between citrate and hydrothermal methods. As-prepared powders were calcined from 700 to 900°C and then characterized by X-ray fluorescence, X-ray diffraction, thermal analyses, particle size analyses, nitrogen adsorption (BET) and scanning electronic microscopy. Films of composition La0,6Sr0,4Co0,2Fe0,8O3 (LSCF6428), powders calcined at 900°C, were screen-printed on gadolinium doped ceria (CGO) substrates and sintered between 1150 and 1200°C. The effects of level of sintering on the microstructure and electrochemical performance of electrodes were evaluated by scanning electronic microscopy and impedance spectroscopy. Area specific resistance (ASR) exhibited strong relation with the microstructure of the electrodes. The best electrochemical performance (0.18 ohm.cm2 at 800°C) was obtained for the cathode sintered at 1200°C for 2 h. The electrochemical activity can be further improved through surface activation by impregnation with PrOx, in this case the electrode area specific resistance decreases to values as low as 0.12 ohm.cm2 (800°C), 0.17 ohm.cm2 (750°C) and 0.31 ohm.cm2 (700°C). The results indicate that the citrate-hydrothermal method is suitable for the attainment of LSCF particulates with potential application as cathode component in intermediate temperature solid oxide fuel cells (IT-SOFCs)

Desenho e Construção de um protótipo gerador de jato de plasma frio a pressão atmosférica para aplicações biomédicas

Research for better performance materials in biomedical applications are constants. Thus recent studies aimed at the development of new techniques for modification of surfaces. The low pressure plasma has been highlighted for its versatility and for being environmentally friendly, achieving good results in the modification of physic chemical properties of materials. However, it is requires an expensive vacuum system and cannot able to generate superficial changes in specific regions. Furthermore, it is limits their use in polymeric materials and sensitive terms due to high process temperatures. Therefore, new techniques capable of generating cold plasma at atmospheric pressure (APPJ) were created. In order to perform surface treatments on biomaterials in specific regions was built a prototype capable of generating a cold plasma jet. The prototype plasma generator consists of a high voltage source, a support arm, sample port and a nozzle through which the ionized argon. The device was formed to a dielectric tube and two electrodes. This work was varied some parameters such as position between electrodes, voltage and electrical frequency to verify the behavior of glow discharges. The disc of titanium was polished and there was a surface modification. The power consumed, length, intensity and surface modifications of titanium were analyzed. The energy consumed during the discharges was observed by the Lissajous figure method. To check the length of the jets was realized with Image Pro Plus software. The modifications of the titanium surfaces were observed by optical microscopy (OM ) and atomic force microscopy (AFM ). The study showed that variations of the parameters such as voltage, frequency and geometric position between the electrodes influence the formation of the plasma jet. It was concluded that the plasma jet near room temperature and atmospheric pressure was able to cause modifications in titanium surface

O futuro do presente: a mídia audiovisual e a sociedade contemporânea na ficção científica do cinema de animação

This research presents a study that seeks to analyze the images of the future in science fiction movies, specifically those made through animation techniques, exploring particularly the representation of audiovisual communication medias in its dialogue with the approached societies in the movies chosen to be analyzed. The proposed discussion seeks approximations in order to answer to the question that initiated this research: how are we thinking the future nowadays? It also seeks to, according to Morin (1997), comprehend aspects of the contemporary society by using the cinema, and at the same time, to understand the cinema, aided by a social analysis

Cinema itinerante no Rio Grande do Norte: aspectos da recepção

In itinerant film projects made in Brazil, the unique experience of watching movies on the big screen is held in open spaces, through the establishment of a contemporary ritual, under which the presence of spectators is primordial. Considering this dynamic of the performance of itinerant cinema, the main objective of this research is to analyze the process of reception of the spectators of the sessions of Cine Sesi Cultural, conducted by the Social Service Industry - Sesi, in Rio Grande do Norte state. The body of research was composed by the audience of the movie sessions of the edition developed in 2010. Analyses were made from the look on the specific audience of open sessions of this cinema project throughout a case study. Theoretical authors of Latin American as Jesus Martin-Barbero, Guillermo Orozco, Eliseo Veron and Nestor Garcia Canclini, which have important theoretical basis for the analysis of research on the cinematographic reception of the spectators, were taken as a basis. In this discussion are associated with contributions from Brazilian authors as Roseli Paulino, Fernando Mascarello, Mauro Wilton Souza, Nilda Jacks and Carolina Escostesguy. Besides the reception study, the research focuses on aspects that relate to and explain the circumstances in which itinerant cinema emerges as an alternative exhibition, for example, the context of the exhibition of films in the country, lack of public policies in the audiovisual sector, and mainly the closing of movie theaters in the inner cities of the country and the consequent migration of these rooms to the malls. Seeking to reduce the existing gap in the studies of the reception of spectators to the cinema in the country, this research presents a deeper analysis of the reception of the public of the itinerant cinema as a contribution to an important database for the diagnosis of projects such as the Cine Sesi Cultural