Um modelo matemático baseado em wavelets para análise do método térmico de recuperação de óleo pesado aplicando irradiação eletromagnética

This work proposes a model to investigate the use of a cylindrical antenna used in the thermal method of recovering through electromagnetic radiation of high-viscosity oil. The antenna has a simple geometry, adapted dipole type, and it can be modelled by using Maxwell s equation. The wavelet transforms are used as basis functions and applied in conjunction with the method of moments to obtain the current distribution in the antenna. The electric field, power and temperature distribution are carefully calculated for the analysis of the antenna as electromagnetic heating. The energy performance is analyzed based on thermo-fluid dynamic simulations at field scale, and through the adaptation in the Steam Thermal and Advanced Processes Reservoir Simulator (STARS) by Computer Modelling Group (CMG). The model proposed and the numerical results obtained are stable and presented good agreement with the results reported in the specialized literature

Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional

Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Efeitos da simpaticotomia endoscópica sobre as artérias caróticas e vertebrais na terapêutica cirúrgica da hiperidrose primária

Analyze, in patients with primary hyperhidrosis (PH) who was undergone to videothoracoscopic sympathicotomy, the degree of vascular denervation after surgical transection of the thoracic sympathetic chain by measuring ultrasonografic parameters in carotid and vertebral arteries. Methods: Twenty-four patients with PH underwent forty-eight endoscopic thoracic sympathicotomy and were evaluated by duplex eco-doppler measuring systolic peak velocity (SPV), diastolic peak velocity (DPV), pulsatility index (PI) and resistivity index (RI) in bilateral common, internal and external carotids, besides bilateral vertebral arteries. The exams were performed before operations and a month later. Wilcoxon test was used to analyse the differences between the variables before and after the sympatholisis. Results: T3 sympathicotomy segment was the most frequent transection done (95,83%), as only ablation (25%) or in association with T4 (62,50%) or with T2 (8,33%). It was observed increase in RI and PI of the common carotid artery ( p<0,05). The DPV of internal carotid artery decreased in both sides (p<0,05). The SPV and the DPV of the right and left vertebral arteries also increased (p<0,05). Asymmetric findings were observed so that, arteries of the right side were the most frequently affected. Conclusions: Hemodynamic changes in vertebral and carotid arteries were observed after sympathicotomy for PH. SPV was the most often altered parameter, mostly in the right side arteries, meaning significant asymmetric changes in carotid and vertebral vessels. Therefore, the research findings deserve further investigations to observe if they have clinical inferences

Investigação das alterações citogenéticas em pacientes pediátricos com leucemia linfóide aguda do Rio Grande do Norte

Leukemia is a heterogeneous group of hematologic malignancies that result from partial or total transformation of the blast cells. The Acute Lymphoblastic Leukemia (ALL) is the most common malignancy in childhood, especially in male, Caucasian children younger than 14 years. Several criteria are adopted to classify ALL, including the cell morphology, cytochemistry, immunophenotyping and cytogenetic analysis. Cytogenetic studies allow a more detailed analysis to detect chromosomal abnormalities of leukemic cells. These modifications will determine the diagnosis, classification, stage characterization, remission assessment and prognosis. In this study were evaluated 30 patients, aged from four months to seventeen years, of both sexes and various ethnicities. The age distribution showed that 67% of patients had between one and ten years (with mean age of XX years old), the most prevalent ethnic was Caucasian (50%) and 57% were males. According to immunophenotype, 93% of patients had B-cells progenitor ALL and 7% early lineage T. Considering the total studied population, the most frequent medical findings were lymphadenopathy (37%), hepatomegaly (77%) and splenomegaly (70%), where one patient could present more than one of these medical findings. Regarding the CBC, the majority of patients had hemoglobin below 10 g / dl (73%), leukocyte count less than 10.000/μL (60%) and platelet count below 150.000/μL (83%). Chromosomal abnormalities were observed in 64% of all patients, where hyperdiploidy was the most common numerical change (67%), followed by hypodiploid (33%). All these data are in agreement with the literature. Moreover, complexes structural and/or number changes not yet described in literature were observed, which indicated poor prognosis. Finally, we concluded that this study demonstrated the importance of cytogenetic study in the diagnosis and identification of prognostic factors in pediatric patients with ALL in Rio Grande do Norte. The results obtained in this study are extremely useful and emphasizes that surveys of this nature must be conducted more frequently in our state

Diversificação evolutiva de gobídeos no litoral brasileiro: padrões citogenéticos e ecomorfológicos

The fishes of the order Perciformes are characterized as an important model for understanding the genetic structure of marine populations, because besides they present examples of conservation chromosomal, also they present the karyotype diversification for some groups. Gobiidae family is the most specious in the marine environment. Among its representatives, many species are part of a cryptic fauna little noticed and studied, a wide distribution with behavioral and reproductive characteristics, that make them conducive to the action of biogeographical barriers. Morphologically this family presents reduced body structures through simplification and regressions. Despite their importance in evolutionary inferences, cytogenetics data are incipient facing their species diversity, especially with western Atlantic species. In order to estimate the evolutionary diversity in Gobiidae, it were developed cytogenetic analysis and the standards body, through geometric morphometrics in five species on the Brazilian coast, Coryphopterus glaucofraenum, Bathygobius mystacium, B. soporator, Ctenogobius smaragdus e C. Boleosoma. The data show significant karyotype and morphological diversity among the species. The pericentric inversions and mergers play an important role in chromosomal evolution of this family, causing karyotypic structural and numerical differences in all species. Karyotypic and morphological comparisons among geographic samples of B. soporator from the coast of Maranhão, Rio Grande do Norte and Bahia showed cytogenetics patterns commons, but different morphological patterns. A sample from the Atol das Rocas revealed conspicuous morphological and karyotypic differentiation of another continental populations, confirming the presence of a new island species. The approaches done reveal diversification consistent with characteristics of a group of low vagile and largely able to environmental selection due from peculiar ecological requirements

A perda de grupos funcionais em comunidades virtuais: efeito das interações entre espécies e grupos funcionais

High levels of local, regional, and global extinctions has progressively simplified communities in terms of both species and ecosystem functioning. Theoretical models demonstrated that the degree of functional redundancy determines the rates of functional group loss in response to species extinctions. Here, we improve the theoretical predictions by incorporating in the model interactions between species and between functional groups. In this study, we tested the effect of different scenarios of interspecific interactions and effects between functional groups on the resistance to loss of community functional groups. Virtual communities have been built with different distribution patterns of species in functional groups, both with high and low evenness. A matrix A was created to represent the net effect of interspecific interactions among all species, representing nesting patterns, modularity, sensitive species, and dominant species. Moreover, a second matrix B was created to represent the interactions between functional groups, also exhibiting different patterns. The extinction probability of each species was calculated based on community species richness and by the intensity of the interspecific interactions that act upon it and group to which it belongs. In the model, successive extinctions decrease the community species richness, the degree of functional redundancy and, consequently, the number of functional groups that remain in the system. For each scenario of functional redundancy, A, and B, we ran 1000 simulations to generate an average functional extinction curve. Different model assumptions were able to generate remarkable variation on functional extinction curves. More extreme variations occurred when the matrix A and B caused a higher heterogeneity in the species extinction probability. Scenarios with sensitive species, positive or negative, showed a greater variation than the scenarios with dominant species. Nested interactions showed greater variation than scenarios where the interactions were in modules. Communities with maximal functional evenness can only be destabilized by the interactions between species and functional groups. In contrast, communities with low functional evenness can have its resistance either increased or decreased by the interactions. The concentration of positive interactions in low redundancy groups or negative interactions in high redundancy groups was able to decrease the functional extinction rates. In contrast, the concentration of negative interactions in low redundancy groups or positive interactions in high redundancy groups was able to increase the functional extinction rates. This model shows results that are relevant for species priorization in ecosystem conservation and restoration

Economia do petróleo e desenvolvimento: estudo exploratório sobre as perspectivas do pré-sal brasileiro

A pesquisa analisa as possibilidades abertas pela exploração de petróleo na camada pré-sal, avaliando de que maneira a expansão do setor petrolífero poderá acelerar o crescimento econômico brasileiro e contribuir para novas estratégias de desenvolvimento. A hipótese inicial é que o Brasil enfrenta uma restrição estrutural de balanço de pagamentos, que poderá ser amenizada pela diminuição das importações de petróleo e derivados e pelo aumento do valor exportado no setor. Para avaliá-la são resgatados aspectos históricos e geopolíticos relacionados ao petróleo, assim como são tratadas as características microeconômicas dos recursos naturais não renováveis. Também se consideram questões de ordem macroeconômica, como a especialização produtiva da economia brasileira e sua inserção no comércio internacional, discutindo como o desenvolvimento da indústria petrolífera poderá afetá-las. Para tanto, a investigação fundamenta-se na teoria estruturalista e nos modelos de crescimento com ênfase na restrição externa. O trabalho examina ainda os casos da Rússia, Venezuela e México para avaliar a experiência de países exportadores de petróleo. Como contribuição, um modelo de crescimento é utilizado para realizar simulações acerca do Brasil, cobrindo o período 2013-2020 com a formulação de três cenários. A partir dos resultados discute-se que a necessidade de consecução das metas fiscal e de inflação pode desencadear políticas restritivas que limitam a utilização da folga fiscal e externa, oriundas do pré-sal, para induzir o crescimento. Conclui-se que um círculo virtuoso de desenvolvimento com mudança estrutural depende não apenas da modernização produtiva, mas também, e principalmente, da evolução político-institucional do país

Estudo numérico do comportamento de muros de arrimo em alvenaria estrutural de blocos vazados

Usually masonry structures has low tension strength, hence the design to flexural efforts can results in high reinforcement ratio, specification of high unit and prism strength, structural members with larger section dimensions and modification in structural arrangement to be possible to use masonry members. The main objective of this study is to evaluate the stiffness, the efforts distribution and the effect of horizontal elements (girders) and vertical elements (counterforts) distribution on the behavior of masonry blocks retaining walls. For this purpose, numerical modeling was performed on typical retaining wall arrangements by varying the amount and placement of horizontal and vertical elements, beyond includes elements simulating the reactions of the soil supporting the foundation of the wall. The numerical modeling also include the macro modeling strategy in which the units, mortar and grout are discretized by a standard volume that represents the masonry elastic behavior. Also, numerical model results were compared with those ones of simplified models usually adopted in bending design of masonry elements. The results show horizontal displacements, principal and shear stresses distribution, and bending moments diagrams. From the analysis it was concluded that quantity and manner of distribution of the girders are both important factors to the panel flexural behavior, the inclusion of the foundation changed significantly the behavior of the wall, especially the horizontal displacements, and has been proposed a new way of considering the flanges section of the counterforts

Análise não-linear de treliças pelo método dos elementos finitos posicional

This work presents the positional nonlinear geometric formulation for trusses using different strain measures. The positional formulation presents an alternative approach for nonlinear problems. This formulation considers nodal positions as variables of the nonlinear system instead of displacements (widely found in literature). The work also describes the arc-length method used for tracing equilibrium paths with snap-through and snap-back. Numerical applications for trusses already established in the literature and comparisons with other studies are provided to prove the accuracy of the proposed formulation

Desenvolvimento de substrato cerâmico BiNbO4 para antenas de microfita de sistemas de comunicações sem fio

The main purpose of this work was the development of ceramic dielectric substrates of bismuth niobate (BiNbO4) doped with vanadium pentoxide (V2O5), with high permittivity, used in the construction of microstrip patch antennas with applications in wireless communications systems. The high electrical permittivity of the ceramic substrate provided a reduction of the antenna dimensions. The numerical results obtained in the simulations and the measurements performed with the microstrip patch antennas showed good agreement. These antennas can be used in wireless communication systems in various frequency bands. Results were satisfactory for antennas operating at frequencies in the S band, in the range between 2.5 GHz and 3.0 GHz.

Dedução de Funções de Alívio para Priorização de Variantes de Chaveamento Adequadas à Eliminação de Sobrecargas

Eventually, violations of voltage limits at buses or admissible loadings of transmission lines and/or power transformers may occur by the power system operation. If violations are detected in the supervision process, corrective measures may be carried out in order to eliminate them or to reduce their intensity. Loading restriction is an extreme solution and should only be adopted as the last control action. Previous researches have shown that it is possible to control constraints in electrical systems by changing the network topology, using the technique named Corrective Switching, which requires no additional costs. In previous works, the proposed calculations for verifying the ability of a switching variant in eliminating an overload in a specific branch were based on network reduction or heuristic analysis. The purpose of this work is to develop analytical derivation of linear equations to estimate current changes in a specific branch (due to switching measures) by means of few calculations. For bus-bar coupling, derivations will be based on short-circuit theory and Relief Function methodology. For bus-bar splitting, a Relief Function will be derived based on a technique of equivalent circuit. Although systems of linear equations are used to substantiate deductions, its formal solution for each variant, in real time does not become necessary. A priority list of promising variants is then assigned for final check by an exact load flow calculation and a transient analysis using ATP Alternative Transient Program. At last, results obtained by simulation in networks with different features will be presented

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Avaliação de robustez, desempenho e aplicação do controlador adaptativo por posicionamento de pólos e estrutura variável

In this work, the variable structure adaptive pole placement controller (VS-APPC) robustness and performance are evaluated and this algorithm is applied in a motor control system. The controller robustness evaluation will be done through simulations, where will be introduced in the system the following adversities: time delay, actuator response boundeds, disturbances, parametric variation and unmodeled dynamics. The VS-APPC will be compared with PI control, pole placement control (PPC) and adaptive pole placement controller (APPC). The VS-APPC will be simulated to track a step and a sine reference. It will be applied in a three-phase induction motor control system to track a sine signal in the stator reference frame. Simulation and experimental results will prove the efficiency and robustness of this control strategy

Uso de renderização volumétrica e realidade virtual para problemas de percolação na engenharia

In the recovering process of oil, rock heterogeneity has a huge impact on how fluids move in the field, defining how much oil can be recovered. In order to study this variability, percolation theory, which describes phenomena involving geometry and connectivity are the bases, is a very useful model. Result of percolation is tridimensional data and have no physical meaning until visualized in form of images or animations. Although a lot of powerful and sophisticated visualization tools have been developed, they focus on generation of planar 2D images. In order to interpret data as they would be in the real world, virtual reality techniques using stereo images could be used. In this work we propose an interactive and helpful tool, named ZSweepVR, based on virtual reality techniques that allows a better comprehension of volumetric data generated by simulation of dynamic percolation. The developed system has the ability to render images using two different techniques: surface rendering and volume rendering. Surface rendering is accomplished by OpenGL directives and volume rendering is accomplished by the Zsweep direct volume rendering engine. In the case of volumetric rendering, we implemented an algorithm to generate stereo images. We also propose enhancements in the original percolation algorithm in order to get a better performance. We applied our developed tools to a mature field database, obtaining satisfactory results. The use of stereoscopic and volumetric images brought valuable contributions for the interpretation and clustering formation analysis in percolation, what certainly could lead to better decisions about the exploration and recovery process in oil fields