102 resultados para Produtor
Resumo:
Hydraulic fracturing is an operation in which pressurised fluid is injected in the geological formation surrounding the producing well to create new permeable paths for hydrocarbons. The injection of such fluids in the reservoir induces seismic events. The measurement of this reservoir stimulation can be made by location these induced microseismic events. However, microseismic monitoring is an expensive operation because the acquisition and data interpretation system using in this monitoring rely on high signal-to-noise ratios (SNR). In general, the sensors are deployed in a monitoring well near the treated well and can make a microseismic monitoring quite an expensive operation. In this dissertation we propose the application of a new method for recording and location of microseismic events called nanoseismic monitoring (Joswig, 2006). In this new method, a continuous recording is performed and the interpreter can separate events from noise using sonograms. This new method also allows the location of seismic sources even when P and S phases onsets are not clear like in situations of 0 dB SNR. The clear technical advantage of this new method is also economically advantageous since the sensors can potentially be installed on the surface rather than in observation well. In this dissertation field tests with controlled sources were made. In the first test small explosives using fire works at 28 m (slant distances) were detected yealding magnitudes between -2.4 ≤ ML ≤ -1.6.. In a second test, we monitored perforation shots in a producing oil field. In this second test, one perforation shot was located with slant distances of 861 m and magnitude 2.4 ML. Data from the tests allow us to say that the method has potential to be used in the oil industry to monitor hydrofracture
Resumo:
The objective of the study was to analyze and discuss the process of urbanization in the tourist city of Natal focusing on the actions of the resident agent as a producer of space tourism. The production and expertise in the areas of the city for the performance of tourism have led to the intensification of social problems of nature that comes to few expelling the residents of the beaches. The cut space of the study included the four beaches of Natal / RN, the praias do Centro, Via Costeira, Ponta Negra beach in the Redinha. For this, was conducted a case study, using the technique of questioning, with the application of one hundred and sixteen (116) questionnaires to residents, with age from thirty-five years, between the four of the City Administrative Regions. The results show that the process of urbanization has interferido tourism on the practices of the recreation of residents in the areas as tourism has shown a trend seen in the intensifying problems of social order, such as prostitution, insecurity, pollution of beaches, etc. The combination of these problems are reflected negatively on the tourist areas and are gradually removing the residents. Through this framework problematic, given to tourist areas in the city, the resident still has not positioned the way criticizes the defense of these, choosing not express or adopting a form of discrete event, such as the gradual exit of the areas and electing tourist beaches in other municipalities. The results are of great significance for the direction of a trip planning committed with the participation of the resident in the planning process. The study is to corroborate with the importance of the participation of the resident, before the trip planning, as it is a fundamental agent for the sustainability of space tourism
Resumo:
The process of globalization which has characterized today s Brazilian economic development is determining in the restructuring of productive capital, influencing the development of an economic model, founded on greater competition and use of technology. As a consequence of that, there has been a certain disorganization of the economy, the growth of social inequalities and the lack of structuring of the labor market and the social security system. This has favored a rapid growth of the urban informal economy in Brazil. In Rio Grande do Norte state, the Greater Natal area is the main production center. This is where this study found 58 informal textile industries. In the research, the organizational structure of these industries, characterized by intensive use of labor vis-à-vis the use of capital, problems with putting production in the market place, although links with the formal sector were evident, is analysed. The research also focuses on the relationship labor x capital, the nature and volume of the industrial activity in the 58 industries, their proprietors and 120 employees
Resumo:
Cette étude a été fondée sur la reconaissance, la description et l'analyse du circuit spatial de la production de l activité des fabriques des casquettes dans la région du Seridó Potiguar. L activité des fabriques des casquettes est située dans les villes de Caicó, Serra Negra do Norte e São José do Seridó, qui forment le pôle de fabriques de casquettes, composé de soixante-quatre (64) unités de fabrication, le deuxième plus grand producteur de casquettes au Brésil. Dans la condition de base géographique, l'opérationnalisation du concept de circuits spatiales de la production a été essentielle à la compréhension de l'utilisation du territoire et de l'indivisibilité de l'espace, du fournisseur de matières premières au consommateur final, comprenant les étapes des matières premières, la main-d'oeuvre, le stockage, les transports, le commerce et la consommation dans la période actuelle, dans laquelle les instances de la production, la circulation, la distribution et de la consommation sont spatialement diffus. Sur la base de l'identification et de la localisation de ces étapes et des principaux acteurs impliqués dans la activité des fabriques de casquettes, une configuration de circuit spatial de la production a été élaborée, en s'interprétant l'utilisation des territoires par les instances productives. L'interprétation des étapes de production a identifié que les entreprises liées à l'Association Seridoense des Fabricants de Casquettes agissent plus efficacement sur le territoire que celles nonassociées, alors que toujours elles investissent dans des nouveaux équipements, en augmentant sa puissance technique pour se renforcer avant un marché si compétitif comme celui des casquettes. En examinant la contribution de la fabrication des casquettes à l'utilisation actuelle des territoires de la coupe, nous avons appris que les activités complémentaires et des matières premiéres nécessaires à sa réalisation se trouvent dans leur environnement géographique. Ainsi, la proximité spatiale entre les étapes de la fabrication des casquettes fait entrevoir la matérialité du territoire, conférée dans la coexistence des techniques passées et présentes, et l'ensemble des actions effectuées par un certain nombre de travailleurs sociaux qui collaborent à la création du circuit spatial de la production de l activité des fabriques des casquettes. Cette étude a confirmé que les fabriques des casquettes sont organisées sous la forme de cellules de production, continues ou discontinues, dont les équipements et les machines à coudre industrielles obéissent à la logique d'une production de plus en plus standardisée. Ce circuit spatial de la production contribue à l'utilisation actuelle des territoires de Caicó, Serra Negra do Norte et de São José do Seridó car il amplifie le mouvement du commerce et des relations entre les lieux, à travers la dynamique des flux des personnes, des biens et des produits, en constante circulation, guidées par la division du travail entre les étapes productives
Resumo:
This research has as an empirical universe, the productive territory of red ware in the Seridó region of Rio Grande do Norte. In the last years this territory has gone through a process of appropriation that has been substantially changing the environmental and social dynamism of the place. However, the industry of red ware has been focusing in some areas, mainly, in the county of Parelhas and Carnaúba dos Dantas. From this point of view, the aim of this work consists in analyze the use of these areas by the red ware industry and the transformations occurred with the expansion of the number of industries and the productivity raise, that requires bigger amounts of earthenware and wood, resources that are low in referred territory. As the result of this process, the suitable alternative has been to acquire inputs in other Rio Grande do Norte counties, as well as in Paraíba counties. To reach the proposed objective, the methodology of this work was consisted of bibliographic and empirical research, regarding the occupation that this activity covers in the Seridó region. From the information obtained during the research, it can be stated that the inputs to the production execution in the red ware industry are acquired in the geographic nearby lands. The analysis of the stages of the production(acquisition of raw material, production and commercialization) showed that the activity acts in a continuous area, having as principal consumer market other northeastern states and the state of Pará. The present study revealed that the pottery activity is set as untenable, because of non-stopping use of the argil and wood, resources that are vanishing from the area, which consume causes a many problems such as deforestation and erosion. Besides, the sale of productive lands for the red ware industries makes harder its good use by the familiar agriculturists in the development of agriculture and cattle raising activity, which for many times is the main economic activity of the place. The precariousness reveals in the constant accidents at work, that most of them are neglected by the local authorities, without any penalty to the industries. Therefore, the industry of red ware in Seridó uses the territory as a resource, leaving its environmental problems that my compromise the quality of life of the actual and future generations
Resumo:
Reservoirs that present highly viscous oils require methods to aid in their recovery to the surface. The elev ated oil viscosity hinders its flow through porous media and conventional recovery methods have not obtained significant efficiency. As such, the injection of steam into the reservoir through an injection well has been the most widely used method of therma l recovery, for it allows elevated volumes of recovery due to the viscosity reduction of the oil, facilitating the oil’s mobility within the rock formation and consequently into the production well where it will be exploited. On the other hand, the injecti on of vapor not only affects the fluids found in the rock pores, but the entire structure that composes the well where it is injected due to the high temperatures used in the process. This temperature increment is conducted to the cement, found in the annu lus, responsible for the isolation of the well and the well casing. Temperatures above 110 ̊C create new fazes rich in calcium in the cement matrix, resulting in the reduction of its permeability and the consequential phenomenon of mechanical resistance ret rogression. These alterations generate faults in the cement, reducing the well’s hydraulic isolation, creating insecurity in the operations in which the well will be submitted as well as the reduction of its economic life span. As a way of reducing this re trograde effect, this study has the objective of evaluating the incorporation of rice husk ash as a mineral additive substitute of silica flour , commercially utilized as a source of silica to reduce the CaO/SiO 2 ratio in the cement pastes submitted to high temperatures in thermal recovery. Cement pastes were formulated containing 20 and 30% levels of ash, apart from the basic paste (water + cement) and a reference paste (water + cement + 40% silica flour) for comparison purposes. The tests were executed th rough compression resistance tests, X - Ray diffraction (XRD) techniques, thermogravimetry (TG), scanning electron microscopy (SEM) and chemical anal ysis BY X - ray fluorescence (EDS) on the pastes submitted to cure at low temperatures (45 ̊C) for 28 days following a cure at 280 ̊C and a pressure of 2,000 PSI for 3 days, simulating vapor injection. The results obtained show that the paste containing 30% r ice shell ash is satisfactory, obtaining mechanical resistance desired and equivalent to that of the paste containing 40% silica flour, since the products obtained were hydrated with low CaO/SiO 2 ratio, like the Tobermorita and Xonotlita fases, proving its applicability in well subject to vapor injection.
Resumo:
The mesoporous materials has been an special attention, among them was discovered in the 1990´s the mesoporous molecular sieve of SBA-15 type. The good features of the SBA- 15 makes this material very promising in catalysis, however, due to the absence of native active sites, it has low catalytic activity. In this way, different metals and oxides have been included in this molecular sieve as a means of introducing active sites and increase its catalytic activity. Among the oxides that are being researched, there is the niobium oxide, which presents strong acid sites and exists in abundance. Brazil is the largest producer of the mineral. On the other hand, the production of biofuels has been desired, but it requires the development of new catalysts for this purpose. The aim of this work was to develop silicate of niobium by impregnation and by new synthesis method for application in the cracking of moringa oil. The methodology consisted of inserting the niobium oxide either by postsynthesis process using wet impregnation and direct insertion. For direct insert a new method was developed for pH adjustment, being tested different pH, and the pH 2.2 was used different ratios of Si/Nb. The materials were characterized by different techniques such as: XRD, N2 adsorption, SEM, EDS, UV-visible, TG/DTG, DSC, TEM, acidity by thermodesorption of n-butilamine and FTIR. After this part of the catalysts developed by the two methods were tested in the thermocatalytic cracking of moringa oil, being used a simple distillation. All silicates of Niobium obtained showed a highly ordered structure, having high specific areas, good distribution of pore diameters, beyond present a morphology in the form of fibers. In the catalysts after synthesis was observed that the niobium inserted has so as octahedrally and tetrahedrally coordinated, demonstrating that there were also oxides formed on the external surface of SBA-15. The materials obtained in the direct synthesis are only tetrahedrally coordinated. The new synthesis method of pH adjusting by using the buffer solution for it, proved to be very efficient for the production of such materials, because the materials obtained showed characteristics and structures similar to the molecular sieve of SBA-15 type. Among the pH tested the material that presented better characteristics was synthesized at pH 2.2. The application of these materials in catalytic cracking showed a higher formation of organic liquids when compared to thermal cracking, in addition to significantly reducing the acidity and residues formed, demonstrating that the use of silicates of Niobium increases both the conversion and the selectivity of the products.
Resumo:
The Textual Analysis of Discourse has its origin in Text Linguistics and it aims at studying the co(n)text meaning production based on the analysis of concrete texts by offering elements to the understanding of the text as a discourse practice throughout the plans or levels of linguistic analysis. In this perspective, we intend to investigate the enunciative responsibility phenomenon in the sentencing court judgment. To do so, we review the theoretical contributions of Textual Analysis of Discourse (ADAM, 2011) and the Enunciative Linguistics from various authors, among them, Rabatel (1998, 2003, 2004, 2005, 2008, 2009, 2010), Nølke (2001, 2005, 2009, 2013), Nølke, Fløttum and Norén (2004), Guentchéva (1994, 1996) and Guentchéva et al. (1994). In this direction, we investigate the enunciative responsibility through a range that comprises the phenomenon from four gradations, each one with a kind of point of view (PoV) and with links that may mark the assumption or the distance from the point of view. Regarding the legal approach of the thesis, our theoretical anchoring follows several authors, among them, Petri (1994), Soto (2001), Alvarez (2002), Alves (2003), Cornu (2005), Albi (2007), Bittar (2010), Asensio and Polanco (2011), López Samaniego (2006), López Montolío and Samaniego (2008), Montolío (2002, 2010, 2011, 2012, 2013), Sterling (2010), Prieto (2013), Lawrence and Rodrigues (2013) and Rodrigues, Passeggi and Silva Neto (2014). Our corpus is composed of 13 sentences from criminal cases arising from the district of Currais Novos-RN, completed in 2012. The results reveal how the judge, from various enunciative instances, builds the court decision, which allowed us to understand the configuration of (non) assumption of enunciative responsibility in the sentencing court judgment discourse genre. In conclusion, we perceive that the discourse units are envisaged or through the assumption, or the non assumption of PoV by the enunciative instances, what guides the producer organization argumentative text and his (her) communicative purposes. With that, the judge creates and/or modifies values and beliefs, induces and/or guides his (her) interlocutor by being able to demonstrate objectivity and/or preventing his (her) face through the mediated constructions or engage through the assumption of the enunciative responsibility of the propositional content of an utterance. In short, we reaffirm our belief that the (non) assumption of the enunciative responsibility configures as an argumentative mechanism strongly marked by the producer of the text with a view to their communicative purposes. The sentence, therefore, is constructed in this game of taking and/or not taking of statements according to argumentative orientation and the objectives of the text producer.
Resumo:
The sugarcane production consists in the principal product activity in the state of Alagoas, holding a structure composed of 25 unities of production that represents the economic base of more than a half of its municipies, what make it be the biggest producer of the sector in North and Northwest, exporting its products for countries in different continents. From this reference, it was searched in the present work, to understand the configuration of the circuit space production of sugar cane in Alagoas, from the use of the territory, trough the analyses of the more significant events related to the sector, and, the established rules by the State, through the government, by organs like Institute of Sugar and Alcohol (IAA), and programs like National Alcohol Program (Proálcool), between others, that had as function to structure and to allocate resources to the sugar cane sector. It was realized that the investments done made possible the renovation of techniques used in the sugar cane complex. In the beginning, with the substitution of the mill for factories and, afterwards, the improvement of the agriculture and factory process themselves, improving the utilization of the byproduct, and the productive integration of instances, specially with the sugar, cane, electricity generation production, intensifying the participation of the state in the internation division of labor, giving it a organization structure divided by big hegemonic agents of this process. SO, the sugar cane geographic configuration existing in alagoano territory was restructured and the circuit even more pass to constitute movement of many scales, subsidized by cooperation circles. However, this configuration showed itself subservient to world commerce, what conditions the adoption of hegemonic practices that are far from the local projects and living practices. The verticality imposed offers a configuration that isn’t peculiar, that only serves to answer to the big hegemonic agent commands, characterizing the continuity of the present capitalism process. It means that the sugar cane factories use corporately the territory as resource to obtain more lucrativity and this way dominate the bigger quantity of consumer commerce
Resumo:
The sugarcane is a monocot plant grown in tropical and subtropical regions, with Brazil being the largest producer. Despite its economic importance, little is known about the molecular flowering process in sugarcane. This physiological process can promote a loss up to 60% in sugar or bioethanol. Thus, this work had as objective characterize a HINT1 homologous gene previously identified in subtractive libraries of flowering. Genomic analysis of gene and promoter region structure allowed the observation that there are at least two distinct genes homologous to HINT on sugarcane. Bioinformatics analyses showed the conservation of the characteristic protein domain of HIT superfamily and indicate a phylogenetic relationship associated to cell location. Moreover, a possible relation with the SBTILISIN-like protein family through the information available in interatomas was observed. This suggests that the HINT gene of sugarcane can be related to plant development, there are several possibilities of interactions in the regulation of floral induction process, because the sequences present in regulatory regions indicate that differential expression of HINT was related to with climatic factors in the Northeast region of Brazil as well as to biotic stress and phytohormones. Furthermore, the sugarcane phenotypes indicate that the influence of HINT may happen due to product accumulation of its enzymatic activity. For these characteristics this gene can be used as a marker in the selection of new varieties.
Resumo:
The new development strategies should operate mainly in the areas of energy efficiency and sustainable agriculture. Thus, the substitution of fossil fuels with biofuels, such as biodiesel, is increasingly on the agenda. The cultivation of oilseed plants for biodiesel production must take place in integrated systems that enable best environmental benefits and are more economically significant. The objectives of this study were to assess the morphological, anatomic, and physiological characteristics of safflower (Carthamus tinctorius L., promising oilseed for biodiesel production) grown in monoculture and intercropping with cowpea bean (Vigna unguiculata L. Walp.); and identify socioeconomic family farmers and verify their acceptance about safflower as an energy crop. The methodology used for the analysis of safflower growth in monoculture and intercropped with beans, were morphoanatomical and histochemical analyzes, made with samples of plants grown in the field in two cropping systems throughout the range of the life cycle of these plants. There were no changes in growth and anatomy of plants, even in the consortium, which is satisfactory to indicate the intercropping system for those crops and can be a good alternative for the family farmer, who may have safflower as a source of income without giving up planting their livelihood. To check the acceptance of safflower by farmers, interviews were made to family farmers by Canudos agrovila in Ceará-Mirim/RN. It was noticed that many of them accept the introduction of safflower as oil crop, although unaware of the species, and that, being more resistant to drought, safflower help in the stability of families who depend on the weather conditions for success their current crops. In general, it is concluded that safflower has features that allows it to be grown in consortium for biodiesel production combined with the production of food, such as cowpea, and can be used enabling better development for family farmers.
Resumo:
The proposition of this research is supported by the definition of Food Safety and Nutrition (FSN), established by the II FSN National Conference. Taking this concept as reference, the research instrument aimed to analyze strategies and actions related to FSN, developed by members of Ceará Mirim Organic Producers Association, located in Rio Grande do Norte state (Brazil), from aspects related to family feeding, as well as means of access, quantity and food culture. It was aimed to answer the following questions: Do the families benefited from Ceará Mirim Organic Producers Association have strategies that assure their FSN? If so, do these strategies originate from public policies or own actions? Do these strategies focus on family revenue? In expenses with food and proper feeding? How do these strategies articulate together and which social networks do they form? In this research, there were also approached questionings which comprise market opening through the declaration of the products as Organization of Social Control (OSC), aggregate value and participation in agroecological fairs, aiming to identify and characterize if these strategies contribute for Food Safety and Nutrition of these families. The data here analyzed were obtained from semi-structured interviews, conducted in the production sites of each farmer, and have a qualitative approach. 21 questionnaires were applied to the family farmers, in seven projects of agrarian reform settlements (Carlos Marighella, Nova Esperança II, Aliança, Marcoalhado I, Santa Águeda, Santa Luzia and União). From this study, it was concluded that most of FSN strategies result from a series of distinct public policies, which potentiate the existing strategies and create new ones, such as in the case of organic production, which is the main motivation, even for the organization of the studied group. These strategies brought improvements in feeding and caused changes in eating habits, especially in the diversification of production for own consumption. This, on the other hand, is assuring greater food autonomy and increasing marketing channels, through fairs or institutional markets. It was also verified that reciprocity relations increased after the organic production, and they are indispensable to assure food in difficult times, also contributing to incentive organic production itself, through supplies exchange.
Resumo:
Brazil is the world's second largest producer of cassava, which most of the production is used to make flour and starch, generating large amounts of waste, cassava. In general, this waste is disposed of directly into the soil and waterways, causing serious environmental impacts. In view of this, the aim of this work was to evaluate the use of cassava wastewater water (cassava) as organic fertilizer in Brachiaria brizantha pasture. Marandu. The experiment was conducted at the Campus Macaíba the Federal University of Rio Grande do Norte. The treatments were increasing rates of cassava, applied to the soil as organic fertilizer. The experimental design was a randomized block design with six treatments and four replications. The treatments consist of cassava doses (0, 15, 30, 60 and 120 m³ ha- 1 ) and a treatment with mineral fertilizer (AM) in the form of NPK (140: 30: 120 kg ha-1 ). Three cuts with an interval of 60 days were carried out. The variables evaluated were: plant height; accumulation of morphological components of fodder; Trapping Light (IL); Leaf Area Index (LAI); Total chlorophyll (CT); Feature Production Seca (PMS). The dry matter production at a dose of 120 m³ha-1 had a quantitative increase, with a total production in 2796 kg ha-1 DM in the second cut, providing an increase of 493% compared to control, and the residual effect observed in the third cut caused a 100% increase compared to 0 m³ ha-1 . Comparing the PMS obtained with the use of AM and other treatments it was observed that it was the second cut equivalent to a dose of 120 m³ ha-1 and the third equivalence has been cut at doses 60 and 120 m³ha-1. For the variables plant height, IL, IAF, CT and leaves Mass adding cassava in the soil promoted a positive linear increase for the three cuts. However, with the AM the IAF was superior to the other treatments. The thatched mass reached its highest production (838 kg ha-1 DM) in the second cut when using a dose of 120 m³ha-1 . In dead material mass in the second and third sections, there was increased linearly increased total of 322 and 452% respectively, compared to a dose of 0 m³ha-1 . The use of cassava showed herbicidal effect for the variable mass of the undesirable negative linear response resulting in decreasing the amount of residue with increasing doses. Manipueira can be used as organic fertilizer in Brachiaria brizantha cv. Marandu for improvements in the productive characteristics, as promoted significant increases in 8 most of the variables studied, especially at a dose of 120 m³ha-1 . This benefits the environment by being alternative for disposal of cassava.
Resumo:
In order to evaluate the effect of levels of dehydrated cane juice sugar (DCJS) (0.0, 1.5, 3.0 and 4.5%) in the diet of European quail (Coturnix coturnix coturnix) on performance on performance, carcass characteristics and economical at 22 days of age indices, 192 quails cutting, were distributed in a completely randomized design with four treatments and six replicates of eight birds each There was no significant difference to the performance of quail in any of the periods. Quadratic effects of levels of DCJS on carcass weight (y = 173.71 + 4.2767x – 1.2644x², R² = 0.99), thigh-thigh more about (y = 36,055 + 1,1263x – 0,2256x², R² = 0.91) and abdominal fat (y = 3,3295 - + 0.8903x 0,19x2, R ² = 0,97) where the optimum levels were estimated 1,69; 2.50 and 2.34%, respectively. There was a linear effect descending of DCJS levels on weight breast with skin (y = 66.267 – 0.5653x, R² = 0.83) and without skin (y = 60.286 – 0.7193x, R² = 0.58). In economic analysis, one can observe higher profit to the producer with the use of conventional feed. However, between the levels of inclusion of sugar cane juice is observed that the level of 1.5% DCJS obtained the best results in economic analysis, obtaining only a difference of relative gross margin of 0.47% compared to conventional. It is recommended 1.69 and 2.50% DCJS for higher carcass, thigh + drumstick weight and lower percentage of abdominal fat quails, respectively.
Resumo:
One of several techniques applied to production processes oil is the artificial lift, using equipment in order to reduce the bottom hole pressure, providing a pressure differential, resulting in a flow increase. The choice of the artificial lift method depends on a detailed analysis of the some factors, such as initial costs of installation, maintenance, and the existing conditions in the producing field. The Electrical Submersible Pumping method (ESP) appears to be quite efficient when the objective is to produce high liquid flow rates in both onshore and offshore environments, in adverse conditions of temperature and in the presence of viscous fluids. By definition, ESP is a method of artificial lift in which a subsurface electric motor transforms electrical into mechanical energy to trigger a centrifugal pump of multiple stages, composed of a rotating impeller (rotor) and a stationary diffuser (stator). The pump converts the mechanical energy of the engine into kinetic energy in the form of velocity, which pushes the fluid to the surface. The objective of this work is to implement the optimization method of the flexible polyhedron, known as Modified Simplex Method (MSM) applied to the study of the influence of the modification of the input and output parameters of the centrifugal pump impeller in the channel of a system ESP. In the use of the optimization method by changing the angular parameters of the pump, the resultant data applied to the simulations allowed to obtain optimized values of the Head (lift height), lossless efficiency and the power with differentiated results.