Estudo numérico do comportamento de muros de arrimo em alvenaria estrutural de blocos vazados

Usually masonry structures has low tension strength, hence the design to flexural efforts can results in high reinforcement ratio, specification of high unit and prism strength, structural members with larger section dimensions and modification in structural arrangement to be possible to use masonry members. The main objective of this study is to evaluate the stiffness, the efforts distribution and the effect of horizontal elements (girders) and vertical elements (counterforts) distribution on the behavior of masonry blocks retaining walls. For this purpose, numerical modeling was performed on typical retaining wall arrangements by varying the amount and placement of horizontal and vertical elements, beyond includes elements simulating the reactions of the soil supporting the foundation of the wall. The numerical modeling also include the macro modeling strategy in which the units, mortar and grout are discretized by a standard volume that represents the masonry elastic behavior. Also, numerical model results were compared with those ones of simplified models usually adopted in bending design of masonry elements. The results show horizontal displacements, principal and shear stresses distribution, and bending moments diagrams. From the analysis it was concluded that quantity and manner of distribution of the girders are both important factors to the panel flexural behavior, the inclusion of the foundation changed significantly the behavior of the wall, especially the horizontal displacements, and has been proposed a new way of considering the flanges section of the counterforts

Estudo Comparativo de Métricas de Pontuação para Aprendizagem Estrutural de Redes Bayesianas

Bayesian networks are powerful tools as they represent probability distributions as graphs. They work with uncertainties of real systems. Since last decade there is a special interest in learning network structures from data. However learning the best network structure is a NP-Hard problem, so many heuristics algorithms to generate network structures from data were created. Many of these algorithms use score metrics to generate the network model. This thesis compare three of most used score metrics. The K-2 algorithm and two pattern benchmarks, ASIA and ALARM, were used to carry out the comparison. Results show that score metrics with hyperparameters that strength the tendency to select simpler network structures are better than score metrics with weaker tendency to select simpler network structures for both metrics (Heckerman-Geiger and modified MDL). Heckerman-Geiger Bayesian score metric works better than MDL with large datasets and MDL works better than Heckerman-Geiger with small datasets. The modified MDL gives similar results to Heckerman-Geiger for large datasets and close results to MDL for small datasets with stronger tendency to select simpler network structures

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Envelhecimento ambiental acelerado em PRF a base de tecidos híbridos kevlar/vidro: propriedades e instabilidade estrutural

There are a number of damaging mechanisms that various materials can suffer in service. However, when working with polymer composite materials, this is something that requires analysis, especially when exposed to adverse environmental conditions. Thus, the objective of the present thesis is the study of the direct influence of environmental aging and the form of hybridization of the reinforcement woven on the structural stability, surfacedegradation and fracture process of polymer composites laminates. For this, the development of two polymer composite laminates was necessary, where one of them was reinforced with a bi-directional woven with hybrid strandsofkevlar-49/glass-Efibers, and the other also with a bi-directionalwoven, however with weft and warpformed of alternating strandsof Kevlar-49 fibers and glass-E fiber The reinforcementwoven are industrially manufactured. Both laminates use a polyester resin as a matrixand are made up of four layers each. All laminates were industrially prepared by the hand lay-up method of manufacturing. To do this, test specimens were manufactured of the respective laminates and submitted to environmental aging accelerated through the aging chamber. They were exposed to alternating cycles of UV radiation and moisture (heated steam) for a standard defined period. At the end of the exposure period the specimens were subjected to mechanical tests of uniaxial tensile and bending in three points and to the characterizationsof the fracture and surface deterioration. In addition, they were submitted to a structural degradation assessment by the measurement of mass variation technique (MMVT) and the measurement of thickness variation technique (MTVT), this last technique being developed in this thesis. At the end of the analysis it was observed that the form of hybridization of the reinforcement woven and the aging process directly influence with losses or gain in mechanical properties, with losses in the structural degradation and in the formation and propagation of damage mechanism of the developedcomposite laminates

Efeitos da radiação uv, temperatura e vapor aquecido nos compósitos poliméricos: monitoramento, instabilidade estrutural e fratura

The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties

Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

Mecanismos de desgaste, história térmica e ciclo de vida de componentes de um motor de combustão interna de aeromodelo

We developed an assay methodology that considered the temperature variation and the scanning electron microscopy as a method to quantify and characterize respectively the consumption evolution in three 46 LA machines, with internal combustion and two-stroke engines, 7.64 cm3 cylinder capacity, 23.0 millimeters diameter and 18.4 millimeters course, RPM service from 2.000 to 16.000 rpm, 1.2 HP power, and 272 grams weight. The investigated engines components were: (1) head of the engine (Al-Si alloy), (2) piston (Al-Si alloy) and (3) piston pin (AISI 52100 steel). The assays were carried out on a desktop; engines 1 and 2 were assayed with no load, whereas in two assays of engine 3 we added a fan with wind speed that varied from 8.10 m/s to 11.92 m/s, in order to identify and compare the engine dynamic behavior as related to the engines assayed with no load. The temperatures of the engine s surface and surroundings were measured by two type K thermopairs connected to the assay device and registered in a microcomputer with data recording and parameters control and monitoring software, throughout the assays. The consumed surface of the components was analyzed by scanning electron microscopy (SEM) and microanalysis-EDS. The study was complemented with shape deformation and mass measurement assays. The temperature variation was associated with the oxides morphology and the consumption mechanisms were discussed based on the relation between the thermal mechanical effects and the responses of the materials characterization

Propriedades cerâmicas e imobilização do manganês em cerâmica estrutural

In this work is the addition of a metallic ion, of the metal Manganese, in a clay of Rio Grande do Norte state for structural ceramics use, the objective this study was to assess the evolution of ceramic properties. The clay was characterized by Chemical and Thermal analysis and Xray difraction. The metallic ion was added in the clay as aqueous solutions at concentrations of 100, 150 and 200 mg / L. The molded by extrusion and the burned were temperatures at 850, 950, 1050 and 1150 º C. Was made Chemical Analysis and investigated the following parameters environmental and ceramic: Solubility, Colour, Linear Retraction (%), Water Absorption (%), Gresification Curves, Apparent Porosity (%), Apparent Specific Mass (g/cm3) and Flexion Rupture Module (kgf/cm2). The results showed that increasing the concentration of metallic ion, properties such as Apparent Porosity (%), Water Absorption (%) decreases and the Flexion Rupture Module (kgf/cm2) increases with increasing temperature independent of the concentration of the ion. The gresification curves showed that the optimum firing temperatures were in the range between 950 and 1050 ° C. The evaluation of the properties showed that the ceramic material can be studied its use in solid brick and ceramic materials with structural function of filling. The results of solubility showed that the addition of ion offers no risk to the environment

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

Atribuição de significado ao conceito de proporcionalidade: contribuições da história da matemática

This study is the result of a work which approaches the Mathematics History how source of the meaning s attribution in the proportionality concept. We adopt the methodology of the source qualitative and we work with a group of teachers from instruction s public system of the fundamental and medium level from Pocinhos City Paraíba. For the data collection, we use the field notes, the questionnaire, a sequence of activities and the interview semistructured like instruments. The study had how objective to know the significates attributeds to proportionality concept through of the activity mediate from Mathematics History, besides to investigate if a approach of the nature enables modification according to this sense. The results obtaineds though the data analysis indicate that the activities bring contributions which refer to achieve objectives. On the other hand they also showed that we have a long trajectory to be trailed in the meaning of to turn the Mathematics History a subsidy effective in the teachers practice, in view of the formation absence in the knowledge area, besides the necessity of the approach adequated of the Mathematics History in the didatics books of Mathematic

Vídeo-aula de história da matemática: uma possibilidade didática para o ensino de matemática

In this work we are disagreeing with the possibility of production and of the use of video-class for the disciplines of history of mathematics by the teachers of elementary e middle school as a way to contribute to the development of their classes. Our goal is to provide to the mathematics teachers the option of connecting social, scientific, cognitive, and didactic aspects of topics in math thoughts to their students. That shall be based in the presence of mathematics in the history of humanity. Thus, we consider possible that teachers and their students can link and relate mathematics to other sciences, education culture, and reflect about the many ways of represent them, as well as the patters of organization of nature and of culture. In this way, they shall be able to observe and interpret situations that involve mathematical questions associated to the various means of historic-epistemological studies already done by other researchers and scholars in the field of history of mathematics who works in creating video-classes. In addition to that, we can use all the available media in order to give edifying dynamics to the mathematical formulations established throughout history. In this sense, we are based and focused on the objectives, which are sustained by educational computer technology, techniques for video making, as well as mathematical teaching proposals and the historical inquiring made by Mendes (2001, 2009a, 2009b). The validating experimentation allowed us to conclude that the techniques we used in the production of the history of mathematics video-classes proved they to be valid ones. They are able to be executed with the minimum of technological resources. In addition, they have the same efficacy as far as classroom use

Ensino de matemática pelo rádio (1950 1970): uma história falada e um documentário didático

This study aimed to describe and analyze aspects of the historical course of teaching Mathematics by Radio Experiences in Rio Grande do Norte, between the decades from 1950 to 1970 in order to organize a documentary (CD-ROM) containing information about Mathematics studied by Radio who have experienced it. In this, we use qualitative research. We seek support in the theoretical framework of cultural history and memory researchers as Certeau (1998), Chartier (1990), Le Goff (2008), Thompson (2002) and Peter Burke (2004). Moreover, we take the elements of oral history. We focus on the teaching of literacy and the primary of the Radio schools in two rural communities - Logradouro and Catolé - who are currently part of the city of Lagoa Salgada (RN) and, with respect to the Junior High School, we stopped in the Course of Madureza at Radio. We used as written sources, especially the documents found in the General Archives of the Archdiocese of Natal (RN) and the employees assigned by the participants of the survey. Our sources come from the oral testimonies of pupils and monitors Lagoa Salgada City, teachers, broadcasters and technicians of Rural Support Service (SAR) Natal (RN). In this study, we identify the geometry Cubação social practices of Lagoa Salgada students. Also identified in the research material, the Global Method with the pedagogy of Paulo Freire, that guided the production of lessons in literacy and primary courses. Content in Mathematics, we find traces of the trend-Empirical activist. In the course of Madureza, there was a tendency formal technique Fiorentini (1995). Finally, as a result of this study, organize and present a documentary (CD-ROM), along with the analysis of this study, containing the history of Mathematics teaching by Radio, from the speech of those who experienced Radio, emphasizing the methodology teaching developed in class, that serves as a reference material for students, professors and researchers.

Recorte dos produtos educacionais em história no ensino da matemática e em didática da matemática a partir das dissertações e teses defendidas no brasil entre 1990-2010

This work has the main purpose of conducting a survey of educational products present in dissertations and doctoral theses focused on the use of history in mathematics teaching and Didactics of mathematics with a French foundation produced in graduate programs in the strict sense of the Brazil between 1990 and 2010, the areas of Education, Mathematics Education, school of Natural Sciences and Mathematics and related areas, according to the research proposal of Mendes (2010). Our interest was to select the products that present concrete proposals for educational activities that can be used in the classroom of Basic Education and Training of Teachers of Mathematics. The research was implemented through a bibliographic study documents the Bank of dissertations and theses from CAPES, libraries and archives of some Postgraduate programs in the country who focus their studies on the subject object of this research, besides the Brazilian Digital Library Theses and Dissertations (BDBTD). From this survey we selected works that present educational products materialized in blocks of activities based on the use of teaching history of mathematics to the classroom as well as the sequence of activities based on the Teaching of Mathematics. In possession of material, produce a CD-ROM containing the selected activities, in order to help support the work of teachers regarding the use of these activities, as a supplementary material to textbooks in their math classes

História da ciência como estratégia didática no ensino médio: um breve olhar de conteúdos da óptica

From a critique of aspects of the current teaching of physics, we propose in this paper an investigation into the conceptions of Nature of Science (NOS) submitted by students from the high school level, as well as the inclusion of discussions about some elements of NOS, through the History and Philosophy of Science, understanding them as facilitating strategy for more effective learning of Physics and, more specifically, the contents of optics. Based on the historical period corresponding to Greek antiquity to the mid-nineteenth century, built and applied a teaching unit to a high school class at the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) Ipanguaçu campus. Our teaching unit involved the reading and interpretation of texts with historical content, observation and assembling five experimental activities, among other activities. Data analysis occurred through questionnaires investigative applied before and after the completion of the teaching unit, as well as questionnaires for content present in the texts. Although not significant, the results indicated that the application of the teaching unit allowed the (re) construction of some conceptions about NOS targets students present in our work, and contribute to a better learning content and greater optical science approach and its nature

Ensinando sobre a natureza da ciência: uma abordagem explícita e contextualizada a partir da história do vácuo

In last decades, the importance of including the contents of the Nature of Science (NOS) in Science Education has been emphasized. Several studies have focused on investigating the conceptions of NOS, supported by students and teachers, as well as design, implement and evaluate proposals that aim to provide a reflection on this theme in the educational context. Considering the complexity of such content, studies indicate the need for explicit and contextualized approaches and the History of Science (HS) is one of the possible paths to this inclusion. We started from the premise that, through a historical study, that aims to discuss the meaning and the basis of our "beliefs", we can know the process of building on what we "believe" and better understand its meaning. This thesis is part of this perspective, proposing to explore the History of the Vacuum, a themed high didactic potential still little used, in order to collaborate with the teaching content of NOS. We present actions on different fronts that originated three products in the context of this research. On the first front, we insert the research and production of instructional materials (three historical texts) to subsidize people interested in the implementation of HPS for educational context through this material. The relevance of this front is justified by the existence of gaps with regard to the production of such material for the context of teacher training. However, we consider that the preparation of instructional material of good quality and accessible does not guarantee that these resources will be used, if they will not be accompanied by discussions in teacher training, on how to use them, contexts and obstacles to be faced. The second part presented refers to the organization and implementation of a workshop for undergraduate students in physics and physics teachers, considering the instrumentalization of these individuals to the preparation and use of teaching strategies to approach aspects of NOS through episodes of History of the Vacuum, as well as the preparation of the text orientation for people interested in implementing the instructional material for secondary education. This guidance text contemplates the difficulties anticipated by the literature of the area and the main challenges faced by the participants about the didactic transposition of HPS for the educational context they were noted during the workshop. The relevance of this second front, in particular, is justified by the existence of gaps with regard to the inclusion of the theme of NOS and the HPS teacher training