Arquitetura, litofácies e evolução tectonoestratigráfica da bacia do rio do peixe, nordeste do Brasil

The Rio do Peixe Basin is located in the border of Paraíba and Ceará states, immediately to the north of the Patos shear zone, encompassing an area of 1,315 km2. This is one of the main basins of eocretaceous age in Northeast Brazil, associated to the rifting event that shaped the present continental margin. The basin can be divided into four sub-basins, corresponding to Pombal, Sousa, Brejo das Freiras and Icozinho half-grabens. This dissertation was based on the analysis and interpretation of remote sensing products, field stratigraphic and structural data, and seismic sections and gravity data. Field work detailed the lithofacies characterization of the three formations previously recognised in the basin, Antenor Navarro, Sousa and Rio Piranhas. Unlike the classical vertical stacking, field relations and seismostratigraphic analysis highlighted the interdigitation and lateral equivalency between these units. On bio/chrono-stratigraphic and tectonic grounds, they correlate with the Rift Tectonosequence of neocomian age. The Antenor Navarro Formation rests overlies the crystalline basement in non conformity. It comprises lithofacies originated by a braided fluvial system system, dominated by immature, coarse and conglomeratic sandstones, and polymict conglomerates at the base. Its exposures occur in the different halfgrabens, along its flexural margins. Paleocurrent data indicate source areas in the basement to the north/NW, or input along strike ramps. The Sousa Formation is composed by fine-grained sandstones, siltites and reddish, locally grey-greenish to reddish laminated shales presenting wavy marks, mudcracks and, sometimes, carbonate beds. This formation shows major influence of a fluvial, floodplain system, with seismostratigraphic evidence of lacustrine facies at subsurface. Its distribution occupies the central part of the Sousa and Brejo das Freiras half-grabens, which constitute the main depocenters of the basin. Paleocurrent analysis shows that sediment transport was also from north/NW to south/SE

Cultura da representação de arquitetura: concursos de projeto, Brasil 2008-2011

This thesis deepens the issues pointed out in our master's dissertation (2009) and the following texts about architectural projects representation presented in architectural competitions. It aims to identify the representation culture of projects from architectural competitions. Were there common ways to argue among successful architects? Which were them? How extent the various arguments are consistent or what is the discursive coherent? Which interlocutors were privileged in argumentation, the requesting ones or those that evaluate the proposals? To answer these questions, we began from a correlation suggested by TOSTRUP (1999) among some drawings – plans, sections, façades, perspective, details or texts - and emphasized aspects in a project argumentation (place, zoning, environmental comfort, energy efficiency, etc.). On the top of this, we add functions that DURAND (2003) indicates relevant to architectural representations: conception, communication or seduction and execution. Other writers, such as COLLINS (1971), COLLYER (2004), MOON (2005), BANDEIRA (2007), and OXMAN (2008) in different ways, offered us subsidies to relate kinds of architectural representations with specific functions or strategies of persuasion. Thus, for 08 Brazilian competitions, occurred between 2008 – 2011, we analyzed the requests from the brief of the official announcement, the evaluations of the jurors, and the boards of the winning designs – graphical and textual representations. That allowed us to observe a representation culture predominantly based on perspectives and plans, even been articulated in different arguments. This may emphasize since objective aspects as building execution to appeals of mere visual seduction. In what regards to the audience, even when the official announcement resembled to one another, the winners’ argumentation were different, suggesting a possible jury’s privilege as an interlocutor.

Implementação de uma arquitetura fuzzy neural em hardware com treinamento online

Computational Intelligence Methods have been expanding to industrial applications motivated by their ability to solve problems in engineering. Therefore, the embedded systems follow the same idea of using computational intelligence tools embedded on machines. There are several works in the area of embedded systems and intelligent systems. However, there are a few papers that have joined both areas. The aim of this study was to implement an adaptive fuzzy neural hardware with online training embedded on Field Programmable Gate Array – FPGA. The system adaptation can occur during the execution of a given application, aiming online performance improvement. The proposed system architecture is modular, allowing different configurations of fuzzy neural network topologies with online training. The proposed system was applied to: mathematical function interpolation, pattern classification and selfcompensation of industrial sensors. The proposed system achieves satisfactory performance in both tasks. The experiments results shows the advantages and disadvantages of online training in hardware when performed in parallel and sequentially ways. The sequentially training method provides economy in FPGA area, however, increases the complexity of architecture actions. The parallel training method achieves high performance and reduced processing time, the pipeline technique is used to increase the proposed architecture performance. The study development was based on available tools for FPGA circuits.

A segurança contra incêndio em uma abordagem para edificações históricas: proposta de reuso para o antigo Grupo Escolar Augusto Severo

O seguinte trabalho apresenta como tema a segurança contra incêndio aplicada a uma edificação de interesse histórico, sendo proposto o anteprojeto arquitetônico de reuso do antigo Grupo Escolar Augusto Severo, localizado na cidade de Natal, Rio Grande do Norte, como pano de fundo para esta discussão. A proposta arquitetônica contempla a instalação do Centro de Extensão, Cidadania e Cultura da Universidade Federal do Rio Grande do Norte na referida edificação e, partiu de uma demanda real da instituição que na data da pesquisa desenvolvia o mesmo projeto em seu âmbito técnico-administrativo. No desenvolvimento do trabalho é proposto a aplicação da legislação local de proteção e combate contra incêndio e também a análise de risco de incêndio proposta pela metodologia do Programa Monumenta, a qual é adotada pelo Instituto do Patrimônio Histórico e Artístico Nacional (IPHAN) através dos seus Cadernos Técnicos. As duas questões apresentadas se diferem por se tratar a primeira de um modelo tradicional e prescritivo (aplicação estrita da lei), e a segunda de um modelo não prescritivo que procura critérios de desempenho da edificação para elencar as medidas de proteção a serem adotadas, portanto, o trabalho procura abranger na situação de projeto proposta tanto as questões legais, como também considerando o real risco que a edificação apresenta (de acordo com a metodologia escolhida). Estes riscos, no caso de prédios históricos, podem ser maiores que os normalmente associado as edificações contemporâneas devido a uma série de fatores, tais como a baixa compartimentação, falta de proteção passiva, uso de materiais com maior poder de combustão e adaptações diversas decorrente dos usos que a edificação apresentou ao longo de seu tempo. Após esta análise de risco será desenvolvido tanto o anteprojeto arquitetônico como o projeto básico de combate contra incêndio, em consonância com as interferências e demandas geradas pela questão da segurança contra incêndio e pânico na edificação de interesse patrimonial.

Arquitetura escolar Infantil modulada e flexível

For many y ears, the federal government policy is to use project for in order to speed up the work for decreasing the elementary education deficit vacancy . In Natal municipality the schoolhouses for children, from 0 to 6 years of age are denom inated Muinicipality Centre for Elementary Education. The federal government provides capital for the news edifications by the program of government named PROINFÂNCIA. This program embraces three types of projects. Type “A” must be furnished by the interes ted municipality and approved by Education and Cultura Ministry. The type “B” is standard plan with capability to 120 schoolchildren in full - time or 240 in two turns and ground plot measuring 40 x 70m and the “type C” also a standart projects to 60 schoolc hildren in full - time or 120 in two turns and ground plot measuring 35 x 45m. Sometimes , due to scarcity of bigger ground plot s is the “type C” instead of “type B”, referring to offering vacancies. In this meaning, this study intend s to present the draft - project to elementary schoolhouse, modulated and flexible, emphasizing the children needs . Therefore, it was studied concept, school architecture, construction technology, reference study and visiting to MCEE Fernanda Jales (PROINFÂNC IA “tipo B”). However, the proposal synthesizes the draft - project by module, implanting in its totality or in parts, according to its necessity and lot cha racteristic.

Acessibilidade em área comercial: um estudo do bairro do Alecrim, Natal/RN

Planejar o espaço urbano pensando na inclusão social de pessoas com deficiência significa considerar a acessibilidade como fator essencial para uma mobilidade urbana completa e segura. Esse ideal reflete-se no espaço comercial que, para ser convidativo e livre de barreiras (sejam elas físicas, tecnológicas ou atitudinais), precisa promover o direito de livre acesso a todos os cidadãos. Partindo deste entendimento, esse estudo tem como objetivo geral analisar as condições de acessibilidade da região denominada “Coração do Alecrim”, área de tradicional comércio popular em Natal. A pesquisa recorreu à abordagem multimétodos e aconteceu em três momentos: (i) avaliação técnica da área por meio da aplicação de check-list, elaborado com base na legislação específica e validado por painel de experts; (ii) elaboração de mapas com uso de Sistema de Informação Geográfica (S.I.G.), tendo como base o resultado da análise realizada na primeira etapa; (iii) aplicação de questionários e realização de entrevistas informais com usuários (visitantes, proprietários e comerciários), para coletar dados sobre sua percepção sobre o lugar, complementando a análise técnica efetuada. Resumindo as informações coletadas, foram elaboradas matrizes de descobertas, como uma junção de todas as etapas de análise. Na conclusão são apresentados pontos críticos de acessibilidade (detectados pela pesquisadora ou apontados pelos usuários) e indicadas algumas diretrizes para a intervenção no local, de modo a colaborar para futuros processos de planejamento urbano do bairro do Alecrim.

Arquitetura bioclimática para instituição de ensino fundamental em São Gonçalo do Amarante/RN

In the design of a building process must consider climatic variations in the region, the external conditions and the use of available resources in nature, like the sun, vegetation, rain and winds, to provide a built environment with comfort and environment reduced energy expenditure. However, increasing urbanization, often with an occupancy of disordered ground comes disregarding this knowledge and disregarding local characteristics, drastically reducing the green areas. This disordered occupation associated with the reduction of green spaces, is modifying aspects of climate and thus, damaging the thermal comfort of users. Given this situation was born the question: What projetuais strategies can bring better thermal conditions to an educational building located in a region of hot and humid weather? Thus, faced with two important issues , education and environmental comfort , the research is justified by the fact that there is a large national demand for expansions and renovations in its public schools , but not in most areas provides students with quality for good learning development. This paper aims to draw up a project for establishment of Primary Education with the application of the concepts of bioclimatic, highlighting the use of vegetation as a regulatory element of the climate. Initially we carried out a literature search; we analyzed architectural solutions and set up the site. The next phases, called understanding, were raised with the laws, rules and environmental restrictions. Subsequently, the program needs and the development of architectural design was defined. The conclusion of this paper presents the definition of criteria and solutions for the use of vegetation to design of bioclimatic architecture in hot and humid climates and contributes a catalog of plant species for schools in the metropolitan region of Natal, RN.

Ícones urbanos na cidade de Natal: arquitetura e desenvolvimento urbano na cidade do sol e mar

Natal has come through major changes in the last 150 years, since the actions of city beautification, in the 19th century, until the present day, when such transformations start to have the objective of including the city in the competition for the attraction of the capital flows and consumption, domestically and in a foreign sense. It is thought that the first initiatives aimed at increasing tourism in Natal occurred in the 1960s, however, it became apparent that only from the 1980s was there a significant increase in tourist activities in Natal and the Metropolitan Region, especially on the east coast of the state of Rio Grande do Norte, leading to an expansion of the labour market, the significant increase of foreign investment, territorial changes of great impact and the production of buildings primarily intended for the hotel industry and second residence for European tourists. Since then, the incentives for tourist activity in the state have been maintained and even increased, based on tourism aimed at natural beauties, local cuisine and events, which transformed the tourist activity in one of the main sources of foreign exchange for the city of Natal. In the early 21st century, the construction of high-rise condominiums, monuments (including the designer ones), such as the Parque da Cidade, designed by Oscar Niemeyer, were already established. Also, shopping centers and, in order to host the World Cup, the new football stadium, the Arena das Dunas, among others, which were aimed at local and foreign consumers, especially European, stood out in the city. It is understood that these new buildings, monuments and also renovations and restorations that were deployed in the city of Natal aimed at constructing a new identity for the city, within the process of capitalist development and urban spectacle. It is considered that the monuments and the iconic buildings are attributes of the cities aimed at selling locations as goods, establishing a new urban environment, a new role as cities, which aimed at seeking greater autonomy from the nation-state. In this research, it was sought to analyze the architectural object, that is, buildings and monuments built or restored in Natal and its relevance to the city marketing promoted by the city itself. It was found that, indeed, such buildings and monuments are inserted in contemporary architectural production as a basis for increasing the competitive nature of Natal. In addition, they reveal a capitalist mode of production, supported by public resources, operating in the production of urban space with a view to repeating the hegemonic model of a competitive city

Novas abordagens para configurações automáticas dos parâmetros de controle em comitês de classificadores

Significant advances have emerged in research related to the topic of Classifier Committees. The models that receive the most attention in the literature are those of the static nature, also known as ensembles. The algorithms that are part of this class, we highlight the methods that using techniques of resampling of the training data: Bagging, Boosting and Multiboosting. The choice of the architecture and base components to be recruited is not a trivial task and has motivated new proposals in an attempt to build such models automatically, and many of them are based on optimization methods. Many of these contributions have not shown satisfactory results when applied to more complex problems with different nature. In contrast, the thesis presented here, proposes three new hybrid approaches for automatic construction for ensembles: Increment of Diversity, Adaptive-fitness Function and Meta-learning for the development of systems for automatic configuration of parameters for models of ensemble. In the first one approach, we propose a solution that combines different diversity techniques in a single conceptual framework, in attempt to achieve higher levels of diversity in ensembles, and with it, the better the performance of such systems. In the second one approach, using a genetic algorithm for automatic design of ensembles. The contribution is to combine the techniques of filter and wrapper adaptively to evolve a better distribution of the feature space to be presented for the components of ensemble. Finally, the last one approach, which proposes new techniques for recommendation of architecture and based components on ensemble, by techniques of traditional meta-learning and multi-label meta-learning. In general, the results are encouraging and corroborate with the thesis that hybrid tools are a powerful solution in building effective ensembles for pattern classification problems.

Avaliação da usabilidade e da arquitetura da informação do site do Instituto do Cérebro da UFRN: um estudo de caso com base nas opiniões dos usuários da instituição

The objective of the current piece of research presents was draw up a list of recommendations for the site of the Instituto do Cérebro da Universidade Federal do Rio Grande do Norte, with an emphasis on fault identification in usability and information architecture, through the application of design techniques with users of the institution. From the use of the following techniques: Cardsorting, applied to a group of six people as target public, such as professor, administrative technicians and graduate student of the institution; Interviews, carried out with the director of the Instituto do Cérebro, secretaries of the undergraduate and graduate courses; Cooperative Evaluation applied in two ways: in group and individually. The evaluation in group was fulfilled in four sessions that occurred with a group composed of six people who are part of the technical staff of the Instituto do Cérebro. In the Individual Cooperative Evaluation, eight users (graduate students and administrative technicians of the Instituto do Cérebro da UFRN) performed tasks which are frequently fulfilled by users from the public target in the site of the Instituto do Cérebro. After each session of the Individual Cooperative Evaluation, a questionnaire of the user´s satisfaction was used about his or her perception in regard to the site usability and utility of the mentioned institute site. Therefore, it was concluded that, by means of the analysis of the results and the triangulation of the obtained data in each one of the techniques applied with the users, in the present piece of research, problems were verified, among others; all related to the unsuitable use of the interface elements, navigation, labeling of some menu terms, and still, the lack of search space and integration with the social networks – besides the lack, positioning and inappropriate formatting of information that would be of high relevance to the users. Finally, a list of recommendations is presented and this can be used in a future interface redesign with the goal to improve the information architecture and the usability of the site of the Instituto do Cérebro da Universidade Federal do Rio Grande do Norte.

Uma linguagem de descrição arquitetural baseada em uma arquitetura de referência para sistemas ubíquos

A computação ubíqua é um paradigma no qual dispositivos com capacidade de processamento e comunicação são embutidos nos elementos comuns de nossas vidas (casas, carros, máquinas fotográficas, telefones, escolas, museus, etc), provendo serviços com um alto grau de mobilidade e transparência. O desenvolvimento de sistemas ubíquos é uma tarefa complexa, uma vez que envolve várias áreas da computação, como Engenharia de Software, Inteligência Artificial e Sistemas Distribuídos. Essa tarefa torna-se ainda mais complexa pela ausência de uma arquitetura de referência para guiar o desenvolvimento de tais sistemas. Arquiteturas de referência têm sido usadas para fornecer uma base comum e dar diretrizes para a construção de arquiteturas de softwares para diferentes classes de sistemas. Por outro lado, as linguagens de descrição arquitetural (ADLs) fornecem uma sintaxe para representação estrutural dos elementos arquiteturais, suas restrições e interações, permitindo-se expressar modelo arquitetural de sistemas. Atualmente não há, na literatura, ADLs baseadas em arquiteturas de referência para o domínio de computação ubíqua. De forma a permitir a modelagem arquitetural de aplicações ubíquas, esse trabalho tem como objetivo principal especificar UbiACME, uma linguagem de descrição arquitetural para aplicações ubíquas, bem como disponibilizar a ferramenta UbiACME Studio, que permitirá arquitetos de software realizar modelagens usando UbiACME. Para esse fim, inicialmente realizamos uma revisão sistemática, de forma a investigar na literatura relacionada com sistemas ubíquos, os elementos comuns a esses sistemas que devem ser considerados no projeto de UbiACME. Além disso, com base na revisão sistemática, definimos uma arquitetura de referência para sistemas ubíquos, RA-Ubi, que é a base para a definição dos elementos necessários para a modelagem arquitetural e, portanto, fornece subsídios para a definição dos elementos de UbiACME. Por fim, de forma a validar a linguagem e a ferramenta, apresentamos um experimento controlado onde arquitetos modelam uma aplicação ubíqua usando UbiACME Studio e comparam com a modelagem da mesma aplicação em SySML.

Mecanismo de tolerância a falhas através de escalonamento para uma arquitetura reconfigurável de grão grosso

The continuous evolution of integrated circuit technology has allowed integrating thousands of transistors on a single chip. This is due to the miniaturization process, which reduces the diameter of wires and transistors. One drawback of this process is that the circuit becomes more fragile and susceptible to break, making the circuit more susceptible to permanent faults during the manufacturing process as well as during their lifetime. Coarse Grained Reconfigurable Architectures (CGRAs) have been used as an alternative to traditional architectures in an attempt to tolerate such faults due to its intrinsic hardware redundancy and high performance. This work proposes a fault tolerance mechanism in a CGRA in order to increase the architecture fault tolerance even considering a high fault rate. The proposed mechanism was added to the scheduler, which is the mechanism responsible for mapping instructions onto the architecture. The instruction mapping occurs at runtime, translating binary code without the need for recompilation. Furthermore, to allow faster implementation, instruction mapping is performed using a greedy module scheduling algorithm, which consists of a software pipeline technique for loop acceleration. The results show that, even with the proposed mechanism, the time for mapping instructions is still in order of microseconds. This result allows that instruction mapping process remains at runtime. In addition, a study was also carried out mapping scheduler rate. The results demonstrate that even at fault rates over 50% in functional units and interconnection components, the scheduler was able to map instructions onto the architecture in most of the tested applications.

Autonomic hardware manager: uma arquitetura de hardware autonômico usando a solução de repositório ativo de componentes

This Thesis main objective is to implement a supporting architecture to Autonomic Hardware systems, capable of manage the hardware running in reconfigurable devices. The proposed architecture implements manipulation, generation and communication functionalities, using the Context Oriented Active Repository approach. The solution consists in a Hardware-Software based architecture called "Autonomic Hardware Manager (AHM)" that contains an Active Repository of Hardware Components. Using the repository the architecture will be able to manage the connected systems at run time allowing the implementation of autonomic features such as self-management, self-optimization, self-description and self-configuration. The proposed architecture also contains a meta-model that allows the representation of the Operating Context for hardware systems. This meta-model will be used as basis to the context sensing modules, that are needed in the Active Repository architecture. In order to demonstrate the proposed architecture functionalities, experiments were proposed and implemented in order to proof the Thesis hypothesis and achieved objectives. Three experiments were planned and implemented: the Hardware Reconfigurable Filter, that consists of an application that implements Digital Filters using reconfigurable hardware; the Autonomic Image Segmentation Filter, that shows the project and implementation of an image processing autonomic application; finally, the Autonomic Autopilot application that consist of an auto pilot to unmanned aerial vehicles. In this work, the applications architectures were organized in modules, according their functionalities. Some modules were implemented using HDL and synthesized in hardware. Other modules were implemented kept in software. After that, applications were integrated to the AHM to allow their adaptation to different Operating Context, making them autonomic.

Integração de projetos no ensino através de BIM: uma abordagem dos cursos de arquitetura e urbanismo da UFRN e da UFPB

The integration between architectural design and structur al systems consi sts, in academic education, one of the main challenges to the architectural design education . Recent studies point to the relevance of the use of computational tools in academic settings as an important strategy for such integration. Although in recent yea rs teaching experience using BIM (BuildingInformationModeling) may be incorporated by the a rchitecture schools , notes the need for further didactic and pedagogical practices that promote the architectural design and structur al integration teaching. This pa per analyzes experiences developed within the UFRN and UFPB, seeking to identify tools, processes and products used, pointing limitations and potentials in subjects taught in these institutions. The research begins with a literature review on teaching BIM and related aspects to the integration of architectural design and stru c tur e . It has been used as data collection techniques in studio the direct observation, the use of questionnaires and interviews with students and teachers, and mixed method, qualitativ e and quantitative analysis . In UFRN, the scope of the Integrated Workshop as a compulsory subject in the curriculum, favors the integration of disciplines studied here as it allows teachers from different disciplines at the same project studio . Regarding the use of BIM form initial users, BIM modelers, able to extract quantitative and automatically speed up production, gaining in quality in the products, however learn the tool and design in parallel cause some difficulties. UFPB, lack of required courses o n BIM, generates lack of knowledge and confidence in using the tool and processes, by most students. Thus we see the need for greater efforts by school to adopt BIM skills and training. There is a greater need for both BIM concept, in order to promote BIM process and consequent better use of tools, and obsolete avoiding impairment of technology, merely a tool. It is considered the inclusion of specific subjects with more advanced BIM skills, through partnerships with engineering degrees and the promotion of trans disciplinary integration favoring the exchange of different cultures from the academic environment.

Proposta de um processador multithreading com características de previsibilidade

The real-time embedded systems design requires precise control of the passage of time in the computation performed by the modules and communication between them. Generally, these systems consist of several modules, each designed for a specific task and restricted communication with other modules in order to obtain the required timing. This strategy, called federated architecture, is already becoming unviable in front of the current demands of cost, required performance and quality of embedded system. To address this problem, it has been proposed the use of integrated architectures that consist of one or few circuits performing multiple tasks in parallel in a more efficient manner and with reduced costs. However, one has to ensure that the integrated architecture has temporal composability, ie the ability to design each task temporally isolated from the others in order to maintain the individual characteristics of each task. The Precision Timed Machines are an integrated architecture approach that makes use of multithreaded processors to ensure temporal composability. Thus, this work presents the implementation of a Precision Machine Timed named Hivek-RT. This processor which is a VLIW supporting Simultaneous Multithreading is capable of efficiently execute real-time tasks when compared to a traditional processor. In addition to the efficient implementation, the proposed architecture facilitates the implementation real-time tasks from a programming point of view.