Formulação de grautes leves para a cimentação de poços de petróleo onshore

Grautes are dry mixes with hydraulic characteristics widely used in construction. This material comprises cement, mineral additives and dosed in accordance with the desired properties. The use of grautes in cementing oil wells potentially increases the precision in the composition of the mixture, since it is requires only the addition of the mixing water before its pumping. Such benefit may be availed in cementing wells since the formulations grautes meet the temperature and pressure characteristics typical of wells. The objective of this study is to evaluate the effect of adding different percentages of industrial minerals properties of light grautes for onshore oil wells. For the formulation of the employees were grautes light industrial minerals and waste minerals abundant in the Northeast, in addiction to Portland cement and chemical additives Special class. Grautes were formulated with densities between 1.55 g/cm3 (13.0 lb/gal) and 1.68 g/cm3 (14 lb/gal). Tests results showed that grautes with higher density in the range studied meet the specifications for cementation of shallow wells onshore. The compositions lighter can also be adjusted for applying the material in the cementation of oil wells

Síntese de zeólita A a partir de diatomita como fonte de aluminossilicato

The synthesis of zeolites from natural sources of silicon and aluminum are promising alternative routes to obtain porous or zeolite MCM family. Such materials are typically used in catalytic processes and / or adsorption is to obtain new products or for separation and purification processes thereof. Environmental legislation is becoming stricter and requires the use of materials more efficient, aiming to achieve pollution prevention, by gas or liquid contaminants in the environment. In order to obtain a material with environmentally friendly features, this study aimed at the synthesis of zeolite A, from an amorphous sediment, diatomite, which is found in abundance in the northeast region of Brazil, may be substituted for conventional products the production of zeolite, involving higher costs. The methodology for obtaining the "Zeolite A" using as a source of silica and alumina diatomite is simple, since this is a source of silicon, not requiring therefore a structural driver, but also by heat treatment, only drying conventional to remove water. The "zeolite A" was obtained from diatomite, but as an intermediate step we obtained the sodalite. The characterization was made by the following techniques: EDX, XRD, FT-IR, SEM and determining a specific area by the BET method and the BJH method for checking the diameter of pores. By characterization of the obtained material was first demonstrated the achievement of sodalite and after modification of the same, there was obtained zeolite A

Produção de fibras de alumina biomórfica a partir do sisal

Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation

Estudo paramétrico da injeção de vapor em reservatórios delgados

Exploration of heavy oil reservoirs is increasing every year in worldwide, because the discovery of light oil reservoirs is becoming increasingly rare. This fact has stimulated the research with the purpose of becoming viable, technically and economically, the exploration of such oil reserves. In Brazil, in special in the Northeast region, there is a large amount of heavy oil reservoir, where the recovery by the so called secondary methods Water injection or gas injection is inefficient or even impracticable in some reservoirs with high viscosity oils (heavy oils). In this scenario, steam injection appears as an interesting alternative for recover of these kinds of oil reservoirs. Its main mechanism consists of oil viscosity reduction through steam injection, increasing reservoir temperature. This work presents a parametric simulation study of some operational and reservoir variables that had influence on oil recovery in thin reservoirs typically found in Brazilian Northeast Basins, that use the steam injection as improved oil recovery method. To carry out simulations, it was used the commercial software STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modeling Group) version 2007.11. Reservoirs variables studied were horizontal permeability, vertical and horizontal permeability ratio, water zone and pay zone thickness ratio, pay zone thickness and thermal conductivity of the rock. Whereas, operational parameters studied were distance between wells and steam injection rate. Results showed that reservoir variables that had more influence on oil recovery were horizontal permeability and water zone and pay zone thickness ratio. In relation to operational variables, results showed that short distances between wells and low steam injection rates improved oil recovery

Pastas compósitas cimento/sílica/polímero para cimentação de poços de baixa profundidade sujeitas à injeção de vapor

The production of heavy oil fields, typical in the Northeastern region, is commonly stimulated by steam injection. High bottom hole temperatures are responsible not only for the development of deleterious stresses of the cement sheath but also for cement strength retrogression. To overcome this unfavorable scenario, polymeric admixtures can be added to cement slurries to improve its fracture energy and silica flour to prevent strength retrogression. Therefore, the objective of the present study was to investigate the effect of the addition of different concentrations of polyurethane (5-25%) to cement slurries containing 40% BWOC silica flour. The resulting slurries were characterized using standard API (American Petroleum Institute) laboratory tests. In addition to them, the mechanical properties of the slurries, including elastic modulus and microhardness were also evaluated. The results revealed that density, free water and stability of the composite cement/silica/polyurethane slurries were within acceptable limits. The rheological behavior of the slurries, including plastic viscosity, yield strength and gel strength increased with the addition of 10% BWOC polyurethane. The presence of polyurethane reduced the fluid loss of the slurries as well as their elastic modulus. Composite slurries also depicted longer setting times due to the presence of the polymer. As expected, both the mechanical strength and microhardness of the slurries decreased with the addition of polyurethane. However, at high bottom hole temperatures, the strength of the slurries containing silica and polyurethane was far superior than that of plain cement slurries. In summary, the use of polyurethane combined with silica is an interesting solution to better adequate the mechanical behavior of cement slurries to heavy oil fields subjected to steam injection

Caracterização batimétrica e fisicooceanográfica do canal de acesso ao porto de Cabedelo/PB: uma análise ambiental ao derrame de óleo

The State of Paraíba is one of the most dynamic states of Brazil, strategically located in the northeast, is notable for the excellent potential for integration of different transportation modes forming the states of Rio Grande do Norte, Pernambuco and Alagoas. The dynamic that occurs with port activity causes changes in the space where it is installed. And the elements of this space are always more than suffering direct or indirect influences as the flow in the port is expanded. Therefore, this region became subject to the accidental spillage of oil, because it presents a heavy traffic of ships of various sizes that can run aground or collide with oil causing accidental events. The study of geomorphological and sedimentological compositions of seafloor becomes important as more is known about the relationships between these parameters and associated fauna, and can identify their preferred habitats. The database background, acoustically collected along the proposed study area, is a wealth of information, which were duly examined, cataloged and made available. Such information can serve as an important tool, providing a geomorphological survey of the sedimentary area studied, and come to subsidize, in a flexible, future decision making. With the study area Port of Cabedelo, Paraíba - Brazil, this research aimed to evaluate the influence of the tidal surface and background in modeling the seabed, including the acquisition of information about the location of submerged rocky bodies and the depth of these bodies may turn out to be natural traps for the trapping of oil in case of leaks, and obtain the relationship between types of bed and the hydrodynamic conditions present in the region. In this context, for this study were collected bathymetric data (depth) and physical oceanographic (height of water column, water temperature, intensity and direction of currents, waves and turbidity), meteorological (rainfall, air temperature, humidity, winds and barometric pressure) of the access channel to the Port of Cabedelo / PB and its basin evolution (where the cruise ships dock), and includes tools of remote sensing (Landsat 7 ETM +, 2001), so that images and the results are integrated into Geographic Information Systems and used in the elaboration of measures aimed at environmental protection areas under the influence of this scale facilities, serving as a grant to prepare a contingency plan in case of oil spills in the region. The main findings highlight the techniques of using hydroacoustic data acquisition together bathymetric surveys of high and low frequency. From there, five were prepared in bathymetric pattern of Directorate of Hydrography and Navigation - DHN, with the depth in meters, on a scale of 1:2500 (Channel and Basin Evolution of Access to Port of Cabedelo), where there is a large extent possible beachrocks that hinder the movement of vessels in the port area, which can cause collisions, running aground and leaking oil. From the scatter diagram of the vectors of currents, it can be seen as the tidal stream and undergoes a channeling effect caused by the bidirectional effect of the tide (ebb and flood) in the basin of the Port of Cabedelo evolution in NW-direction SE and the highest speed of the currents occurs at low tide. The characterization weather for the period from 28/02 to 04/07/2010 values was within the expected average for the region of study. The multidisciplinary integration of products (digital maps and remote sensing images), proved to be efficient for the characterization of underwater geomorphological study area, reaching the aim to discriminate and enhance submerged structures, previously not visible in the images

Um Modelo híbrido para previsão de curvas de produção de petróleo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Ocorrência da infecção por Toxoplasma gondii e avaliação da imunização em caprinos do sertão do cabugi, Rio Grande do Norte

Toxoplasmosis is one zoonosis caused by Toxoplasma gondii protozoan. Goats, amongst the production animals, are one of the species most susceptible to this parasite, being one them main involved agents in ovine and goat abortions, determining great economic losses and implications for public health, since the presence it parasite in the products of goat origin, consist in one of the main sources of infection for the man. In this study 244 blood samples in 8 farms situated in 4 cities from the Sertão do Cabugi region, Rio Grande do Norte State, northeast of Brazil and, tested by ELISA assay. The results had shown a prevalence of 47.13% for anti- T. gondii antibodies and a significant association between positivity and variable evaluated as age, locality and property. The IgG avidity assay evaluated in 115 positive samples was carried to discriminate acute and chronic infection. Twelve samples (10.4%) had presented antibodies of low avidity while 103 (89.6%) presented high avidity antibodies; indicating that most of the animals was precocious exposure to the parasite. Significant difference was verified only for the variable sex. We also evaluate the capacity of recombinant adenoviruses codifying SAG1, SAG2, SAG3 and CMV in inducing activation of specific immune response in goat. These 109 animals received 109 pfu of the AdSAG1, AdSAG2, AdSAG3, AdCMV or PBS in vaccine protocol with 3 immunizations. Serum samples of the each animal, before and after mmunization, had been submitted to the ELISA. The results demonstrate that the immunizations had induced the production of IgG antibodies specific against T. gondii proteins

Avaliação de parâmetros de estresse oxidativo em plantas de cana-de-açúcar tratadas com peróxico de hidrogênio

The genus Saccharum belongs to Poaceae family. Sugarcane has become important monocultures in Brazil due to their products: ethanol and sugar. The production may change between different regions from Brazil. This difference is related to soil, climatic conditions and temperature that promotes oxidative stress that may induce an early flowering. The aim of this work was to identify the effects of oxidative stress. In order to analyse this, sugarcane plants were submitted to oxidative stress using hydrogen peroxide. After this treatment, the oxidative stress were analyzed Then, the plant responses were analyzed under different approaches, using morphophysiological, biochemical and molecular tools. Thus, sugarcane plants were grown under controlled conditions and until two months they were subjected first to a hydroponics condition for 24 hours in order to acclimation. After this period, these plants were submitted to oxidative stresse using 0 mM, 10 mM, 20 mM and 30 mM hydrogen peroxide during 8 hours. The histomorphometric analysis allowed us to verify that both root and leaf tissues had a structural changes as it was observed by the increased in cell volume, lignin accumulation in cell walls. Besides, this observation suggested that there was a change in redox balance. Also, it was analyzed the activity of the SOD, CAT and APX enzymes. It was observed an increase in the SOD activity in roots and it was also observed a lipid peroxidation in leaves and roots. Then, in order to identify proteins that were differently expressed in this conditions it was used the proteomic tool either by bidimensional gel or by direct sequencing using the Q-TOF EZI. The results obtained with this approach identified more than 3.000 proteins with the score ranging from 100-5000 ions. Some of the proteins identified were: light Harvesting; oxygenevolving; Thioredoxin; Ftsh-like protein Pftf precusor; Luminal-binding protein; 2 cys peroxiredoxin e Lipoxygenase. All these proteins are involved in oxidative stress response, photsynthetic pathways, and some were classified hypothetical proteins and/or unknown (30% of total). Thus, our data allows us to propose that this treatment induced an oxidative stress and the plant in response changed its physiological process, it made changes in tissue, changed the redox response in order to survival to this new condition

IL-10 na patogênese da infecção por Leishmania infantum

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Aspectos socioeconômicos e demográficos relacionados ao estresse e a síndrome de Burnout em fisioterapeutas no Brasil

Dos problemas de saúde existentes no ambiente de trabalho, 18% afetam o aparelho psíquico, a exemplo do estresse, atingindo cerca de 30% dos trabalhadores em geral. A persistência e intensidade do estresse, associada às sucessivas tentativas de lidar com os mesmos, tornam os indivíduos vulneráveis ao surgimento da Síndrome deBurnout. O objetivo deste trabalho foi identificar a relação dos aspectos socioeconômicos e demográficos com o estresse e a Síndrome de Burnout em fisioterapeutas do Brasil. Para isso, este estudo teve uma abordagem do tipo transversal, com 1040 fisioterapeutas do Brasil, através de uma amostragem do tipo snowbolle não probabilística. Utilizou-se um questionário socioeconômico, demográfico e profissional, a Escala de Estresse no Trabalho (EET) e a adaptação do Cuestionario para la Evaluación del Síndrome de Quemarse por el Trabajo (CESQT). Na análise dos dados, foram utilizadas a estatística descritiva e inferencial. Dentre os principais resultados obtidos, percebeu-se uma maior representatividade da região Nordeste (48,7%), com idade média de 31anos, sexo feminino (75,7%), carga horária semanal de 35,4 horas, com 3-5 anos de atuação profissional. Observou-se que 37,0% apresentavam estresse relacionado estatisticamente com a idade (p=0,008),atividade física (p=0,039) e satisfação com a saúde (r=-0,322; p<0,001). Não foi observado nenhum caso de Burnout, porém houve uma média elevada nas dimensões, desgaste psíquico, indolência e culpa, totalizando 49,0% comtendência ao desenvolvimento da síndrome. Portanto, as variáveis, idade, prática da atividade física e satisfação com a saúde obtiveramrelação com o estresse. Para o Burnout, destacaram-se a região de moradia (centro-oeste), satisfação com a saúde, local de trabalho (clínicas e hospitais), além do maior número de locais de trabalho. Diante desse contexto, os estudos sobre o estresse e a Síndrome de Burnout se apresentam como elementos derelevância dentro do contexto da prevenção dos riscos laborais e da análise das condições de trabalho

Uso sustentável da Copernicia prunifera (Miller) H. E Moore no semiárido potiguar: valorização de saberes e conservação dos recursos genéticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

O jingle e outras práticas culturais dos vendedores de rua de Aracaju/SE

This masters dissertation constitutes in a mapping with base in a field research carried in the streets of commercial center and adjacencies of the Aracaju city, capital of Sergipe state, located in Brazilian‟s Northeast. This is a study about the jingle and others social practices found in the day-by-day of streets by the streets sellers. There is a clear intention of consider the pregão singed by sellers of the street how a jingle that is produced, transmitted and accepted in a means social, characterized how cultural manifestation study. Thus, this ethnography aims to observe the use of the jingle and other cultural practices carried out by street vendors, showing how they are produced, disseminated and consumed in everyday life, as a way to do it. These practices that occur in cities since ancient times continue to occur in all Brazilian cities, including the capital cities, although in some cases, some of them such as the jingle, they get more scarce. Specifically aimed at rescuing the memory of these cultural practices, considering them as "tactics" of practitioners, a resistance of street vendors, individuals, "ordinary" real "anonymous wanderers" in the face of pressure from a dominant force and uneven. In this perspective, the present study is based on the theories of Certeau (1990, 1996) and Coradini (1995) on daily life in the cities, seeking to demonstrate how street vendors engage in a "diverted", subversive, selling its products, creating and using the jingle and other similar relationships that are part of common culture, introducing itself as "ways of doing" that are appropriate or re-appropriated, consumed or accepted in joints over time and within the "anthropological urban spatiality

Caminho possível para o desenvolvimento do RN: a utopia do Polo Gás Sal

La présente étude sur la modernisation économique qui s est opérée dans le Rio Grande do Norte, constitue un débat concernant les tentatives de faire aboutir un projet de développement industriel fondé sur l exploitation des matières premières locales telles que le sel, le calcaire, les eaux mères et le pétrole, entre les années 70 et 90 du XXe siècle. Elle cherche à montrer, à partir de l observation de l action planifiée de l État national et régional, soutenu par le capital international et par les groupes économiques et politiques locaux, comment on a tenté d implanter, dans des conjonctures économiques distinctes, une industrie d intrants de base moyennant la création de deux pôles de développement : le Pólo Químico Industrial (1974) et le Pólo Gás Sal (1996). Elle est centrée sur l analyse des actions orientées vers la concrétisation de ces pôles, et prendra pour objet les politiques de développement émanant de l État national, en particulier celles qui relevaient du II PND et qui visaient, au cours des années 70, à l implantation d une industrie décentralisée dans la région Nordeste ; les règles fixées par le Plano Nacional de Desestatizações, destinées à promouvoir les privatisations des entreprises publiques brésiliennes, lesquelles ont rendu possible la vente d Alcanorte au groupe industriel commandé par Fragoso Pires, et les politiques définies par l État national et régional, rassemblées sous le titre de « guerre fiscale » afin d attirer des capitaux internationaux susceptibles de rendre viable le Pólo Gás Sal. Il y est démontré que l État a coordonné un ensemble d actions dans les domaines de l infrastructure et des exonérations fiscales et financières, dans le but d accélérer la transition d une économie primaire et exportatrice vers une économie moderne, industrialisée. Et que le concours simultané de forces économiques et sociales particulièrement expressives le capital national et international, les élites locales n a pas suffi pour promouvoir la modernisation industrielle escomptée des secteurs chimique et pétrochimique. Parmi les différentes raisons qui ont contribué à un tel échec, on peut mentionner : l absence d une accumulation interne préalable de capital ; la dépendance de l économie locale par rapport à la technologie et au capital des groupes économiques internationaux ; l inconsistance des stratégies de développement relevant de la politique qui caractérisait la « guerre fiscale », et la fragilité de la représentation politique locale