Adaptação eletrônica de um leitor mecânico de coto, investigação e desenvolvimento de interface CAD

Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.

Efeito da adição de argila expandida e adições minerais na formulação de concretos estruturais leves autoadensáveis

The search for alternative materials with lower density, reduction in heat transfer and propagation of noise associated with the ease of handling and application in concrete structures, represents an enormous challenge in the formulation and knowledge of the performance of self-compacting lightweight concrete, which has technology little known nationally, and appears on the international scene as an innovative material and alternative to conventional concrete. Based on these, this study set out to study self-compacting lightweight concrete made with two distinct grades of expanded clay associated with the addition of plasticizing/superplasticizers additives and mineral additions of metakaolin and bagasse ash of sugar cane. There is also an object of study, evaluation of pozzolanic activity of mineral admixtures and their influence on the durability characteristics of concrete. The rheological, physical, mechanical and microstructural analysis in this study served as basis in the classification of concretes autoadensáveis, targeting the national technical requirements for their classification in the category autoadensável and lightweight structural. The inclusion of mineral admixtures (metakaolin and bagasse ash of sugar cane), partial replacement of cement, pozzolanic activity and demonstrated maintenance of mechanical properties through the filler effect, a reduction of up to 76% of the nitrogen gas permeability in blend with 20% bagasse ash. All concretes had rheology (cohesion and consistency) suitable for self-adensability as well as strength and density inherent structural lightweight concrete without presenting phenomena of segregation and exudation

Análise da influência de superfícies refletivas nas perdas de calor de sistema térmicos

The use of reflective surfaces functioning as thermal insulator has grown significantly over the years. Reflective thermal insulator are materials that have several characteristics such as low emissivity, low absorptivity and high reflectivity in the infrared spectrum. The use of these materials has grown a lot lately, since it contains several important radioactive properties that minimize the heat loss of thermal systems and cooling systems that are used to block the heat on the roof of buildings. A system made of three surfaces of 316 stainless steel mirror was built to analyze the influence of reflective surfaces as a way to reduce the heat loss and thereby conserve the energy of a thermal system. The system was analyzed both with and without the presence of vacuum, and then compared with a system that contained glass wool between the stainless steel mirror walls, since this isolator is considered resistive and also broadly used around the world in thermal systems. The reflectivity and emissivity of the surfaces used were also measured in this experiment. A type K thermocouple was fixed on the wall of the system to obtain the temperature of the stainless steel mirror surfaces and to analyze the thermal behavior of each configuration used. The results showed an efficiency of 13% when the reflective surfaces were used to minimize the heat loss of the thermal system. However, the system with vacuum had the best outcome, a 60% efficiency. Both of these were compared to the system made of glass wool as a thermal insulator

Análise das propriedades termofísicas, mecânicas e geométricas de telhas cerâmicas queimadas em forno caieira e forno abóbada

In the industry of ceramic in Rio G. do Norte, tile stands out as the most manufactured product by this industry, being the intermittent kiln abóbada and caieira the principal type of kiln used in burning. There was a need to make a study of the influence exerted by the type of kiln in which tiles are burnt in their thermo physical properties. The analysis started with 24 raw samples of tile, which was split in two groups of 12 samples and burnt in Abóbada and Caieira kiln. Besides that, it was made study of the tax of heat transfer to the environment (for each kiln). After having been burnt the samples were taken for laboratory analysis. The properties verified were impermeability, determination of dry mass, absorption of water, the load of bending rupture and its geometric characteristics, the tests were conducted following the currents standards. The tests were carried out according to the ABNT - NBR 15310. The calculation of the rate of heat transfer showed that the abóbada kiln is more efficient than the Caieira, however the results of tests on the samples revealed no superiority of one over another sample. So the furnace had no influence on the performance of the ceramic tiles

Desenvolvimento de um sistema para aplicação dos conceitos da tecnologia cad3d-bim na indústria moveleira

In this work was developed an information system to apply the concepts of CAD3D-BIM technology for the design activities of the furniture industry. The development of this system was based in an architecture comprised of two modules: a web interface to management the metadata of models from furniture's library and the combination of three-dimensional CAD software with a specific plugin to access the information from this model. To develop this system was also used a Data Base Management System (DBMS) designed to storage the information from models in a hierarchical way, based on concepts of Group Technology (GT). The centralization of information in a single database allows the automatic availability of any changes to all participants involved in a particular project when it‟s happens. Each module from system has its own connection to this database. Finally was developed a prototype from a 3D virtual environment to help create Virtual Reality projects in the web. A study from available technologies to create 3D web applications for execution in websites was done to support this development. The interconnection between modules and the database developed allowed the assembly of a system architecture to support the construction and exhibition of projects of the furniture industry in accordance with the concepts proposed by BIM (Building Information Modeling), using as object of study the furniture industry of state of Rio Grande do Norte

Medida indireta de temperatura de corpos imersos em plasma

O gradiente térmico da superfície para o interior do sólido depende da taxa de colisões das partículas e da condutividade térmica do material utilizado. Quando um sólido é imerso em plasma, a transferência de energia ocorre por radiação e colisões das partículas sobre a superfície do material. Dependendo da taxa de colisões das particulas e da condutividade térmica do sólido existirão gradientes térmicos da superfície para o interior das amostras, ocorrendo picos térmicos na superficie, ou seja, o aquecimento pontual nas regiões de colisões. A fim de estudar esse efeito, amostras de aço rápido AISI M35 cujos valores de dureza são fortemente sensíveis à temperatura de revenimento, foram utilizadas como micro sensores térmicos. Amostras foram temperadas em forno resistivo e, em seguida, parte das mesmas foram revenidas em forno resistivo e a outra parte em plasma. A partir do gráfico da dureza (Hv) em função da temperatura (T) das amostras revenidas em forno resistivo foi possível obter uma função Hv(T) para determinação indireta do perfil térmico das amostras tratadas em plasma. As amostras foram revenidas em plasma utilizando temperatura de referência igual a 550 oC. Em seguida foi obtido o perfil de dureza dessas amostras ao longo da seção transversal e, subsequentemente, o perfil de temperatura. Verificou-se que amostras tratadas em plasma, ao contrário daquelas tratadas em forno resistivo, apresentaram gradiente de temperatura da superfície para o núcleo. Além disso, verificou-se que as amostras tratadas em configuração planar apresentaram gradientes térmicos inferiores àquelas tratadas em configuração cátodo oco, variando de 20 a 120 °C, respectivamente

Modelagem da transferência de massa na remoção do óleo da água produzida por flotação em coluna com uso de tensoativos de origem vegetal

The treatment of oil produced water and its implications are continually under investigation and several questions are related to this subject. In the Northeast Region Brazil, the onshore reservoirs are, in its majority, mature oil fields with high production of water. As this oil produced water has high levels of oil, it cannot be directly discarded into the environment because it represents a risk for contamination of soil, water, and groundwater, or even may cause harm to living bodies. Currently, polyelectrolytes that promote the coalescence of the oil droplets are used to remove the dispersed oil phase, enhancing the effectiveness of the flotation process. The non-biodegradability and high cost of polyelectrolytes are limiting factors for its application. On this context, it is necessary to develop studies for the search of more environmentally friendly products to apply in the flotation process. In this work it is proposed the modeling of the flotation process, in a glass column, using surfactants derived from vegetal oils to replace the polyelectrolytes, as well as to obtain a model that represents the experimental data. In addition, it was made a comparative study between the models described in the literature and the one developed in this research. The obtained results showed that the developed model presented high correlation coefficients when fitting the experimental data (R2 > 0.98), thus proving its efficiency in modeling the experimental data.

Projeto e Operação em Escala Semi-Industrial de um Equipamento para Tratamento de Águas Produzidas na Indústria do Petróleo Utilizando Nova Tecnologia: misturador-decantador à inversão de fases - MDIF

The aim of this work is to use a new technology in the treatment of produced wastewaters from oil industry. An unit for treat produced waters called UTMDIF, was designed, installed and operated in an industrial plant for treatment of effluents from oil industry. This unit operates by means of the method of separation of phase inversion and can become a promising alternative to solve the problem of oil/water separation. This method constitutes the basis of the working of a new design of mixersettler of vertical configuration which occupies small surface area. The last characteristic becomes specially important when there is limitation on the lay-out of the plant, for example, over maritime platforms to explore oil. This equipment in a semi-industrial scale treats produced wastewaters contaminated with oil at low concentrations (ranging from 30 to 150 mg/L) and throughputs of 320 m3/d (47,4 m3 m-2 h-1). Good results were obtained in oil/water separation which leads to the necessary specification to discharge those wastewaters. Besides, the non dependence of the efficiency of separation in spite of the salinity of the medium becomes the equipment an attractive new technology to treat wastewaters containing oil at low concentrations

Uso da tecnologia de troca iônica no tratamento de águas contaminadas com Nitrato do Aqüífero Dunas-Barreiras, Natal/RN-Brasil

The city of Natal comprises an area of about 170 km² (65,63 squares miles). The Dunas-Barreiras Aquifer is the most important reservoir of the coastal basin of RN. It is being responsible for the water supplying of about 70% of the population, however, due to the sewage disposal system by cesspools and drains, it is presently affected in a great extent by nitrates contamination. Thus, the present work proposes to research the utilization of contaminated water by nitrates of this fountainhead and find cost of the potable water through the ionic exchange technology. This technology consists in the removal of mineral salts by the exchange of cations for one ion of hydrogen (H+), through the passage of water by cationic resin bed and, secondly, by the exchange of the anions for hydroxyl ions (OH-) through a anionic resin bed. The obtained results have showed the waters derived from fountains, big water holes and shallow wells were microbiologically contaminated, while the waters derived from deep wells (above 70 m 76,58 yards) were free of contamination. Thus, only these ones are suitable to the use of ionic technology. The experiments were conducted with the resin IMAC-HP-555 such as kinetic, thermodynamic, and adsorption by fixed bed studies, being obtained several project variables for the experimental column, as follow: work temperature of 25oC; resin maximum capacity maximum e mean of adsorption ==0,01692 g NO3-1/g R e 0,0110 g NO3-1/g R, respectively. On the experimental column were performed breakthrough tests which pointed for an average ideal average speed of work of 13.2 m / h, with an average efficiency of 45% of adsorption, an optimal concentration of NaCl desorption of 8%, and an ideal desorption time of 80 minutes for the equilibrium conditions of water from the Dunas-Barreiras aquifer. Scale projection for ion-exchange column for denitrification, for these variables, using a computer modeling programme, to project the column of ion exchange ROREX-420/2000, obtained a cost for the drinking water denitrified by this system of R$ 0,16 / m3

Tecnologia mais limpa para produção de mel seco de cana e sua inclusão em rações de frangos de corte

This study analyzed the effects of adding dry sugar cane molasses (MSC) to the feed of broiler chickens, and determining the economic feasibility of use of this type of diet; 240 male Ross race broiler chickens, one day in age, were utilized in this study. The experimental desing was a completely randomized whit 6 treatments and 4 replications, in 24 portions of 10 birds per parcel. The treatments corresponded to 6 rations (T1-T6) in phase initial (1-21 days) and 6 rations (T1-T6) in phasem finish (22-42 days) characterized by substitution of corn meal in levels increase 0, 5, 10, 15, 20 e 25% by the molasse dried sugar-cane. The birds received water and free ration during the whole creation phase, being the iso-proteins and iso-calories rations. The variance analysis showed the 1 a 21 days significant differences for average gain weight (P<0,05), average consumption of ration (P<0,05) and average alimentary conversion (P<0,05) and the 22 a 42 days, the analysis of variance showed significant differences for gain in weight (P<0,01) and average alimentary conversion (P<0,05). There no difference significant on average consumption of ration (P>0,05) the 22 a 42 days of age. Results showed out that is possible to use molasse dried sugar-cane up to 8,3 % in broilers ration. It was concluded the level of 8,3 % of addition gave the best economical returns in the experimental conditions

A desistência de alunos na licenciatura em física no Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN): causas e sugestões para o combate

This dissertation proposes studying the issue of withdrawal undergraduate in physics at the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN) and collaborate with suggestions for dealing with this problem. The first chapter begins with an overview of two significant problems in the Brazilian educational system: the high dropout rates in degrees in physics and the lack of teachers with specific training in this science. Then, we discuss the relevance of this research to the area of physics teaching, as well as justify its completion as part of a professional master's degree. After, we present a proper definition for the term withdrawal, which is based on the existing problem in the IFRN. And, in the same chapter, we explicitly the focus, the objectives and the methodological aspects of this work. The results obtained in our investigation are presented in next four chapters. In the second chapter of this dissertation, we present: a brief history of the creation of IFRN degree in physics, the functioning of this course and the foundation of classrooms 2004.2 and 2006.1. We also show a kind of map of the withdrawal of the groups investigated (the dropout rate was 84.4% in both groups) and an analysis of the relationship between the curricula of each of them and the number of dropouts. In the third chapter, we display a descriptive statistics of the students which dropout and found that the largest dropout occurred with students who are women, married, parents of one kid; workers, joined with a minimum age of 23 years and completed high school at least 6 years. Then in the fourth chapter, we reveal and discuss the students' reports on the causes of their dropout. From the data presented, we can say that the answer to the question "What was the main reason for your dropout?" Is mainly in personal injury claims: another option for upper-level course and lack of time to devote to the course. In the fifth chapter, we show the results related to teacher s opinions about the phenomenon in question. We detected three main causes for the abandonment, according to teachers: the lack of dedication, the lack of interest and lack of integration in the course. In the sixth and final chapter, we discuss the results and present our conclusion and the proposed report - the product of this dissertation, presented as Annex. This report contains mainly suggestions for curricular and institutional actions that can contribute to reducing the dropout degree in Physics in the IFRN. The main actions suggested are: implementation of the curriculum in disciplines, implementation of programs or actions to combat this poor content of basic training, implementation of specific programs or actions for the student worker, and dissemination of IFRN degree in physics in schools through seminars or workshops

Práticas de leitura e escrita na formação em ciências e tecnologia

The discussion about the need of improving the reading and the writing practices of professionals from the most different knowledge areas has caused, in Brazilian and foreign institutions of higher education, a movement of insertion of curricula components whose focus is the reading and the writing in academic formation. To contributing with the reflection about that discussion, this master s degree dissertation has as object of study the situated linguistic formation. Our general objective is to analyze a linguistic formation proposal to graduating students from the Bachelor s degree in Science and Technology (BCT) of the Federal University of Rio Grande do Norte (UFRN). To constructing that analysis, we have established four specific objectives: a) verifying if the ten brazilian Institutions of Higher Education which offer the BCT have curricula components of reading and writing directed to that formation; b) describing how these Bachelor s degree reading and writing curricula components are presented; c) examining differences and similarities which, in general, exist among curricula components related to reading and writing in each one of the researched institutions; d) revealing which categories delineate the linguistic formation developed in the BCT of the UFRN. In order to reaching our goals, this work has been based on the dialogical conception of the language (BAKHTIN [1952-1953] 2010), on the literacy studies (KLEIMAN [1995] 2008; TINOCO, 2008) and on the critical pedagogy (FREIRE, 1980; 2007). Methodologically, this qualitative research of ethnographic direction (ANDRÉ, 1995) is grounded in Applied Linguistics (PEREIRA; ROCA, 2009; PASCHOAL; CELANI (Orgs.), 1992). This research has the contribution of professors, scholars and monitors of the field of Reading and Writing Practices (PLE) and also graduating students from the UFRN BCT which had already studied PLE-I and/or PLE-II. The tools used for data collection/generation were: curricula components programs related to reading and writing in the BCT in the researched higher education institutions (IES), questionnaires, semi-structured interviews and profiles. The generated data allowed us to establish the following analysis categories: situationality (real situation, thematic contemporaneity and thematic focalization) and literacy projects (learning community and protagonism). The results achieved show that most IES which offer BCT worry about improving the reading and writing competences of their graduating students; however, there is still a lot to be done (increase of the number of class hours, contents and methodological aspects review, theoretical referential sophistication) so that the curricula components can be configured as a situated and significant linguistic formation. Finally, we make some suggestions for improving the work which has been made in the BCT of the UFRN, making then the mother tongue teaching in courses of the area of exact and technological sciences stronger

Pressupostos ontológicos para se pensar a nova tecnologia: técnica, informação e ser e tempo

La recherche presentée, realisée sur le domaine de la méthaphysique, s´agit de rassembler des pressupositions pour une fondamentation ontologique de la technologie de l´Information, basé sur la philophie de Martin Heidegger; foncièrement, sur l´analytique existentiel du Dasein dans l´ouvrage Être et Temps. À partir de la pensée sur ce qui est aujourd´hui , il s´agit d´investiguer sur quels fondaments la Nouvelle Tecnologie se fut érigée de façon a que nous sommes engajés au projet de numérisation des étants que en même temps que destine l´homme a l´oubli de l´Être, l´offre la possibilité de transformation. Le rapport entre la question de l´Être et la question de la technique est analysé comme des chemins croisés et dans ce carrefour il devient possible penser ce qui est technique, ce qui est information pour Heidegger et de quel façon les modes existentiels du Dasein sont prêtes pour caractériser l ´homme au sein de la tecnologie de l´information. Par cette appropriation, il reste penser comment c´est possible l´ouverture d´une perspective de reconduction de l´homme à la vérité de l´Être. Finalement, la structuration des fondements rends possible la réflexion discursive général: avec qui nous nous ocuppons, comme nous sommes, dans quelle direction nous nous acheminons, les thèmes générales, respectivement, des trois chapitres. Les points d´investigation du premier chapitre son: a) La caractérisation précise du Dasein, appuyé sur des considerations de Benedito Nunes, Hans-Georg Gadamer, Jacques Derrida et Rüdiger Safränski; b) Le concept de technique et son essence chez Heidegger; c) la distinction entre technique et technologie, appuyé sur le pensée de J. Ellul, Michel Séris, Otto Pöggeler, Michel Haar, Dominique Janicaud; c) Le concept de cibernetique chez Heidegger et chez Norbert Wiener; d) La caractérisation preliminaire d´information, l´analyse étimologique e philosophique, l´avis de Heidegger te les théories de Rafael Capurro; f) L´Analyse du phénomène de la numérisation des étants, des considérations de Virilio, et l´analyse d´un concept de virtuel avec Henri Bergson et Gilles Deleuze. Dans le deuxième chapitre, l´analyse des existentiels du Dasein vers le sommaire des fondements de base pour la caractérisation de la technologie de l´information comme un problème philosophique. Finalement, aprés avoir presenté les concepts introdutoires que délimitent le questionement, suivi par les indications et pressupositions ontologiques trouvés sur Être et Temps, le troisième chapitre disserte sur le péril, ce qui sauve et la sérénité, les trois mots-clés de la pensée heideggerienne sur la technique que permettent l´approche conclusif de la question

Uma nova tecnologia no pensamento de Herbert Marcuse: arte e técnica na sociedade unidimensional

This dissertation addresses the issue of technology in the work of Herbert Marcuse, explaning the merger between technology and domination that result in a totalitarian technological apparatus. Thus, technological civilization is supported and justified by a rational technological apparatus in the society, we have come not only the philosophy of Marcuse, but other great thinkers too, like Heidegger, Hegel, Marx. We also present a debate involving the philosophy of science, logic and linguage. Marcuse points to the need for a new technological rationality that emerge from a new sensibility, where the technique would allow a new relationship between man and nature. From then on, would emerge the need for a new subject. This transition would be possible by means of sensitivity, where art would become the art of live. With the link between art and technique made possible by new sensitivity, the author leaves one of its main contribution: he leaves open the possibility for the subject to choose new targests for technological development

Uma nova tecnologia no pensamento de Herbert Marcuse: arte e técnica na sociedade unidimensional

This dissertation addresses the issue of technology in the work of Herbert Marcuse, explaning the merger between technology and domination that result in a totalitarian technological apparatus. Thus, technological civilization is supported and justified by a rational technological apparatus in the society, we have come not only the philosophy of Marcuse, but other great thinkers too, like Heidegger, Hegel, Marx. We also present a debate involving the philosophy of science, logic and linguage. Marcuse points to the need for a new technological rationality that emerge from a new sensibility, where the technique would allow a new relationship between man and nature. From then on, would emerge the need for a new subject. This transition would be possible by means of sensitivity, where art would become the art of live. With the link between art and technique made possible by new sensitivity, the author leaves one of its main contribution: he leaves open the possibility for the subject to choose new targests for technological development