Micropartículas de quitosana estruturadas com aerosil®: estabilidade, adsorção, encapsulação e liberação de substâncias ativas

Biodegradable microspheres used as controlled release systems are important in pharmaceutics. Chitosan biopolymer represents an attractive biomaterial alternative because of its physicochemical and biological characteristics. Chitosan microspheres are expected to become promising carrier systems for drug and vaccine delivery, especially for non-invasive ways oral, mucosal and transdermal routes. Controlling the swelling rate and swelling capacity of the hydrogel and improving the fragile nature of microspheres under acidic conditions are the key challenges that need to be overcomed in order to enable the exploration of the full pharmaceutical potential use of these microparticles. Many studies have focused on the modification of chitosan microsphere structures with cross-linkers, various polymers blends and new organic-inorganic hybrid systems in order to obtain improved properties. In this work, microspheres made of chitosan and nanosized hydrophobic silica (Aerosil R972) were produced by a method consisting of two steps. First, a preparation of a macroscopically homogeneous chitosan-hydrophobic silica dispersion was prepared followed by spray drying. FTIR spectroscopy, X-ray powder diffraction, differential scanning calorimetry, thermal gravimetric analysis, scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (TEM) were used to characterize the microspheres. Also, the were conducted acid stability, moisture sorption capacity, release properties and biological assays. The chitosan-hydrophobic silica composite microspheres showed improved thermal degradation, lower water affinity, better acid stability and ability to retard rifampicin and propranolol hydrochloride (drug models) release under simulated physiological conditions. In vitro biocompatibility studies indicated low cytotoxicity and low capacity to activate cell production of the pro-inflammatory mediator nitric oxide. The results show here encourage further studies on the use of the new chitosan-hydrophobic silica composite microspheres as drug carrier systems via oral or nasal routes.

Alinhamento estratégico da TI: o caso da UFRN

It is considered that the Strategic Alignment IT is the first step within the IT Governance process for any institution. Taking as initial point the recognition that the governance corporate has an overall view of the organizations, the IT Governance takes place as a sub-set responsible for the implementation of the organization strategies in what concerns the provision of the necessary tools for the achievement of the goals set in the Institutional Development Plan. In order to do so, COBIT specifies that such Governance shall be built on the following principles: Strategic Alignment, Value Delivery, Risk Management, Performance Measurement. This paper aims at the Strategic Alignment, considered by the authors as the foundation for the development of the entire IT Governance core. By deepening the technical knowledge of the management system development, UFRN has made a decisive step towards the technical empowerment needed to the “Value Delivery”, yet, by perusing the primarily set processes to the “Strategic Alignment”, gaps that limited the IT strategic view in the implementation of the organizational goals were found. In the qualitative study that used documentary research with content analysis and interviews with the strategic and tactical managers, the view on the role of SINFO – Superintendência de Informática was mapped. The documentary research was done on public documents present on the institutional site and on TCU – Tribunal de Contas da União – documents that map the IT Governance profiles on the federal public service as a whole. As a means to obtain the documentary research results equalization, questionnaires/interviews and iGovTI indexes, quantitative tools to the standardization of the results were used, always bearing in mind the usage of the same scale elements present in the TCU analysis. This being said, similarly to what the TCU study through the IGovTI index provides, this paper advocates a particular index to the study area – SA (Strategic Alignment), calculated from the representative variables of the COBIT 4.1 domains and having the representative variables of the Strategic Alignment primary process as components. As a result, an intermediate index among the values in two adjacent surveys done by TCU in the years of 2010 and 2012 was found, which reflects the attitude and view of managers towards the IT governance: still linked to Data Processing in which a department performs its tasks according to the demand of the various departments or sectors, although there is a commission that discusses the issues related to infrastructure acquisition and systems development. With an Operational view rather than Strategic/Managerial and low attachment to the tools consecrated by the market, several processes are not contemplated in the framework COBIT defined set; this is mainly due to the inexistence of a formal strategic plan for IT; hence, the partial congruency between the organization goals and the IT goals.

Avaliação dos impactos do uso do sistema de gestão hospitalar no Hospital Universitário Onofre Lopes

The object of this study was motivated by the need to know the possible causes of differences in results achieved in the implementation of a Computerised Management System (CMS) in a Federal University Hospital, located in northeastern Brazil, to understand the factors that influenced the results in different groups when was used the same systems implementation methodologies. Considering the implication of managers, health professionals, other professionals involved and the existing organizational structure in the period when implantation occurred, aimed to know the perception of these people about the development of CMS in the deployment process in your group or sector and also in the organization.The methodology used in this study was the content analysis which provides a rich set of methodological tools for evaluating speeches,enabling us to discourse from the unknown analysis and subjectivity, but with scientific rigor, allowing, at the end, to understand the disparity in results in the implementation of CMS.It was used as a research tool, a semi-structured interview, which exploits a qualitative approach, as suggested by the authors. It was used the approach of the episodic interview, to be more narrative about the experiences of the interview participants in their practical experience along the CMS deployment process in the hospital.Were interviewed three groups of professional and a group of managers, all with higher education in their professions and who participated in the entire implementation process from the beginning.It followed the Bardin's methodology (2009) in all the phases of treatment and interpretation of data, where emerged three categories: the "Thought and Knowledge"; the "Practices and Changes"; the "Obtained Results". From the category "Thought and Knowledge"emerged three subcategories: the "Administrative", the "Institutional" and the "IT Knowledge". From the category "Practices and Changes" emerged three subcategories: "Reality Prior to CMS"; "The IT Project and the implementation of CMS" and "Impacts of the CMS Implementation". From the category "Results Obtained" emerged three subcategories: "Benefits Promoted by CMS", "Dissatisfaction Observed" and "Level of Use and Understanding CMS ". It was observed that the lack of integration of the sectors was a determinant problem in the implementation of CMS. The CMS implementation project was not well dimensioned and divulged in the institution. Different models of leaderships and of objectives of the sectors influenced in the course of the CMS implementation process. We can mention that an CMS should be a consolidation of organizational practices tool already institutionalized and of integration amongthe sectors and not supporting to isolated practices and personalistsfrom sectors of the institution.

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

Simulador de escoamento multifásico em poços de petróleo (SEMPP)

The multiphase flow occurrence in the oil and gas industry is common throughout fluid path, production, transportation and refining. The multiphase flow is defined as flow simultaneously composed of two or more phases with different properties and immiscible. An important computational tool for the design, planning and optimization production systems is multiphase flow simulation in pipelines and porous media, usually made by multiphase flow commercial simulators. The main purpose of the multiphase flow simulators is predicting pressure and temperature at any point at the production system. This work proposes the development of a multiphase flow simulator able to predict the dynamic pressure and temperature gradient in vertical, directional and horizontal wells. The prediction of pressure and temperature profiles was made by numerical integration using marching algorithm with empirical correlations and mechanistic model to predict pressure gradient. The development of this tool involved set of routines implemented through software programming Embarcadero C++ Builder® 2010 version, which allowed the creation of executable file compatible with Microsoft Windows® operating systems. The simulator validation was conduct by computational experiments and comparison the results with the PIPESIM®. In general, the developed simulator achieved excellent results compared with those obtained by PIPESIM and can be used as a tool to assist production systems development

Desenvolvimento de metodologia para avaliação de desempenho ambiental em edifícios adaptada à realidade do Nordeste brasileiro

This research refers to the production of green buildings, defined, mainly, based on the use of sources of alternative energies, smaller emission of pollutant, use of recyclable materials, systems of recycling of the waters, maximization of the natural illumination, preservation of green areas or native, and appropriate quality of the internal air. From the conception of those buildings, it appears the needs of evaluating them, creating the methodologies for the evaluation of environmental performance of buildings. In that way, this work can be divided in two moments: the first one when it identifies the methodologies for the evaluation of environmental performance for buildings existents in the literature, defining their categories, criteria and sub-criteria to be appropriate to the reality of the Brazilian Northeast; and the second one when starting from the analysis of the systems of existent evaluation. It defines a methodological base and it generates a new evaluation system, denominated MEDACNE (Methodology of Evaluation of Environmental Acting for Construction in the Northeast). In that moment, the process of framing of the section of the building site is verified under the maintainable optics, stimulated mainly by the pressures of the society - conferences, protocols and agreements. Finally, the proposed methodology was applied in a case study, a residential building, called Maria José Gurgel , located in Natal-RN, Brazil, for its validation. This methodological proposition should increase the patterns environmental places for the production of new buildings, and it will be a reference guide for architects, engineers and planners to develop their constructions considering the criteria of the sustainability. This study made use of bibliographical research in books and specialized magazines and the analysis of the data was realized in an interpretative way

Estratégias para a organização da pesquisa em cana-de-açúcar: uma análise de governança em sistemas de inovação

PEDRO, Edilson da Silva. Estratégias para a organização da pesquisa em cana-de-açúcar: uma análise de governança em sistemas de inovação. 2008. 226f. Tese (Doutorado em Política Científica e Tecnológica) - Universidade Estadual de Campinas, Campinas, 2008.

Sistemas interativos musicais aplicados à percussão mediada

CAMPOS, Cleber da Silveira ; MANZOLLI,Jônatas. Sistemas Interativos Musicais aplicados à percussão mediada. In: CONGRESSO DA ASSOCIAÇAO NACIONAL DE PESQUISA E POS-GRADUAÇAO EM MUSICA (ANPPOM), 20.,2010, Florianópolis. Anais... Florianópolis: ANPPOM, 2010.

Gerenciamento de alarmes em plataformas marítimas de produção de hidrocarbonetos: metodologia e estudo de caso

In the operational context of industrial processes, alarm, by definition, is a warning to the operator that an action with limited time to run is required, while the event is a change of state information, which does not require action by the operator, therefore should not be advertised, and only stored for analysis of maintenance, incidents and used for signaling / monitoring (EEMUA, 2007). However, alarms and events are often confused and improperly configured similarly by developers of automation systems. This practice results in a high amount of pseudo-alarms during the operation of industrial processes. The high number of alarms is a major obstacle to improving operational efficiency, making it difficult to identify problems and increasing the time to respond to abnormalities. The main consequences of this scenario are the increased risk to personal safety, facilities, environment deterioration and loss of production. The aim of this paper is to present a philosophy for setting up a system of supervision and control, developed with the aim of reducing the amount of pseudo-alarms and increase reliability of the information that the system provides. A real case study was conducted in the automation system of the offshore production of hydrocarbons from Petrobras in Rio Grande do Norte, in order to validate the application of this new methodology. The work followed the premises of the tool presented in ISA SP18.2. 2009, called "life cycle alarm . After the implementation of methodology there was a significant reduction in the number of alarms

Modelo em dinâmica de sistemas para gestão de aeroportos brasileiros

The importance of the airport sector in the development of a country refers to the need for studies on management of airports, to aid the process of decision making. In Brazil, growth in passenger demand is why investments in order to balance the capacity of an airport with air demand. Thus, the study aims to develop a model for Dynamic Systems able to assist airport management in Brazilian sizing subsystems an airport (Passenger Terminal, Runway and Patio). The methodology of this work consists in the steps of defining the problem, formulating the hypothesis dynamic building simulation model, and validation experiments. Finally, we examined the status of each subsystem in thirteen Brazilian airports in scenarios current, most likely and optimistic for air passenger demand

RoboEduc: uma metodologia de aprendizado com robótica educacional

In this work, we propose a methodology for teaching robotics in elementary schools, based on the socio-historical Vygotsky theory. This methodology in conjunction with the Lego Mindstoms kit (R) and an educational software (an interface for control and programming of prototypes) are part of an educational robotics system named RoboEduc. For the practical development of this work, we have used the action-research strategy, being realized robotics activities with participation of children with age between 8 and 10 years, students of the elementary school level of Municipal School Ascendino de Almeida. This school is located at the city zone of Pitimbu, at the periphery of Natal, in Rio Grande do Norte state. The activities have focused on understanding the construction of robotic prototypes, their programming and control. At constructing prototypes, children develop zone of proximal development (ZPDs) that are learning spaces that, when well used, allow the construction not only of scientific concepts by the individuals but also of abilities and capabilities that are important for the social and cultural interactiond of each one and of the group. With the development of these practical workshops, it was possible to analyse the use of the Robot as the mediator element of the teaching-learning process and the contributions that the use of robotics may bring to teaching since elementary levels

Metodologia para modelagem, validação e programação de controladores lógicos industriais usando statecharts básicos

Due of industrial informatics several attempts have been done to develop notations and semantics, which are used for classifying and describing different kind of system behavior, particularly in the modeling phase. Such attempts provide the infrastructure to resolve some real problems of engineering and construct practical systems that aim at, mainly, to increase the productivity, quality, and security of the process. Despite the many studies that have attempted to develop friendly methods for industrial controller programming, they are still programmed by conventional trial-and-error methods and, in practice, there is little written documentation on these systems. The ideal solution would be to use a computational environment that allows industrial engineers to implement the system using high-level language and that follows international standards. Accordingly, this work proposes a methodology for plant and control modelling of the discrete event systems that include sequential, parallel and timed operations, using a formalism based on Statecharts, denominated Basic Statechart (BSC). The methodology also permits automatic procedures to validate and implement these systems. To validate our methodology, we presented two case studies with typical examples of the manufacturing sector. The first example shows a sequential control for a tagged machine, which is used to illustrated dependences between the devices of the plant. In the second example, we discuss more than one strategy for controlling a manufacturing cell. The model with no control has 72 states (distinct configurations) and, the model with sequential control generated 20 different states, but they only act in 8 distinct configurations. The model with parallel control generated 210 different states, but these 210 configurations act only in 26 distinct configurations, therefore, one strategy control less restrictive than previous. Lastly, we presented one example for highlight the modular characteristic of our methodology, which it is very important to maintenance of applications. In this example, the sensors for identifying pieces in the plant were removed. So, changes in the control model are needed to transmit the information of the input buffer sensor to the others positions of the cell

Desenvolvimento de substrato cerâmico BiNbO4 para antenas de microfita de sistemas de comunicações sem fio

The main purpose of this work was the development of ceramic dielectric substrates of bismuth niobate (BiNbO4) doped with vanadium pentoxide (V2O5), with high permittivity, used in the construction of microstrip patch antennas with applications in wireless communications systems. The high electrical permittivity of the ceramic substrate provided a reduction of the antenna dimensions. The numerical results obtained in the simulations and the measurements performed with the microstrip patch antennas showed good agreement. These antennas can be used in wireless communication systems in various frequency bands. Results were satisfactory for antennas operating at frequencies in the S band, in the range between 2.5 GHz and 3.0 GHz.

Aplicação de sistemas multi-classificadores no diagnóstico de falhas em motores de indução trifásicos

Equipment maintenance is the major cost factor in industrial plants, it is very important the development of fault predict techniques. Three-phase induction motors are key electrical equipments used in industrial applications mainly because presents low cost and large robustness, however, it isn t protected from other fault types such as shorted winding and broken bars. Several acquisition ways, processing and signal analysis are applied to improve its diagnosis. More efficient techniques use current sensors and its signature analysis. In this dissertation, starting of these sensors, it is to make signal analysis through Park s vector that provides a good visualization capability. Faults data acquisition is an arduous task; in this way, it is developed a methodology for data base construction. Park s transformer is applied into stationary reference for machine modeling of the machine s differential equations solution. Faults detection needs a detailed analysis of variables and its influences that becomes the diagnosis more complex. The tasks of pattern recognition allow that systems are automatically generated, based in patterns and data concepts, in the majority cases undetectable for specialists, helping decision tasks. Classifiers algorithms with diverse learning paradigms: k-Neighborhood, Neural Networks, Decision Trees and Naïves Bayes are used to patterns recognition of machines faults. Multi-classifier systems are used to improve classification errors. It inspected the algorithms homogeneous: Bagging and Boosting and heterogeneous: Vote, Stacking and Stacking C. Results present the effectiveness of constructed model to faults modeling, such as the possibility of using multi-classifiers algorithm on faults classification

Desenvolvimento de monopolos quase-espirais para aplicações em sistemas UWB

This work is the analysis of a structure of the microstrip antenna designed for application in ultra wide band systems (Ultra Wideband - UWB). This is a prospective analytical study where they tested the changes in the geometry of the antenna, observing their suitability to the proposed objectives. It is known that the UWB antenna must operate in a range of at least 500 MHz, and answer a fractional bandwidth greater than or equal to 25%. It is also desirable that the antenna meets the specifications of track determined by FCC - Federal Communication Commission, which regulates the system in 2002 designating the UWB bandwidth of 7.5 GHz, a range that varies from 3.1 GHz to 10, 6 GHz. by setting the maximum power spectral density of operation in -41.3 dB / MHz, and defining the fractional bandwidth by 20%. The study starts of a structure of geometry in the form of stylized @, which evolves through changes in its form, in simulated commercial software CST MICROWAVE STUDIO, version 5.3.1, and then tested using the ANSOFT HFSS, version 9. These variations, based on observations of publications available from literature referring to the microstrip monopole planar antennas. As a result it is proposed an antenna, called Monopole Antenna Planar Spiral Almost Rectangular for applications in UWB systems - AMQEUWB, which presents simulated and measured results satisfactory, consistent with the objectives of the study. Some proposals for future work are mentioned