Avaliação de desempenho da codificação wavelet em canais seletivos em frequência

Wavelet coding has emerged as an alternative coding technique to minimize the fading effects of wireless channels. This work evaluates the performance of wavelet coding, in terms of bit error probability, over time-varying, frequency-selective multipath Rayleigh fading channels. The adopted propagation model follows the COST207 norm, main international standards reference for GSM, UMTS, and EDGE applications. The results show the wavelet coding s efficiency against the inter symbolic interference which characterizes these communication scenarios. This robustness of the presented technique enables its usage in different environments, bringing it one step closer to be applied in practical wireless communication systems

Análise e projeto de superfícies seletivas em frequência multibanda e/ou banda larga

Frequency selective surfaces (Frequency Selective Surface - FSS) are often used in various applications in telecommunications. Some of these applications may require that these structures have response with multiple resonance bands. Other applications require that the FSS response have large frequency range, to meet the necessary requirements. FSS to design with these features there are numerous techniques cited in the scientific literature. Thus, the purpose of this paper is to examine some common techniques such as: Overlap of FSS; Elements combined; Elements Elements convolucionados and fractals. And designing multiband FSS and / or broadband selecting simple ways in terms of construction and occupy the smallest possible space, aiming at practical applications. Given these requirements, three projects FSS were performed: a technology applied to IEEE 802.11 a/b/g/n and two projects for application in UWB. In project development, commercial software Ansoft DesignerTM and experimental results were satisfactory was used

Estudo e especificação de um sistema de instrumentação para unidades de elevação de petróleo utilizando tecnologia sem fio

Wireless sensor networks are reality nowadays. The growing necessity of connectivity between existing industrial plant equipments pushes the research and development of several technologies. The IEEE 802.15.4 LR-WPAN comes as a low-cost and powersaving viable solution, which are important concerns while making decisions on remote sensoring projects. This study intends to propose a wireless communication system which makes possible the monitoring of analogic and/or digital variables (i. e., the pressure studied) involved on the artificial methods for oil and gas lifting. The main issues are: To develop a software based on SMAC Standard in order to create a wireless network to monitoring analogic and/or digital variables; To evaluate the communication link based on the number of lost packets tested in different environments (indoor and outdoor) and To propose an instrumentation system consisting of wireless devices

Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise

Compósito Polimérico Híbrido: Comportamento Mecãnico, Descotinuidade Geométrica e Resistência Residual

The growing demand in the use of hybrid composite materials makes it essential a better understanding of their behavior face of various design conditions, such as the presence of geometric discontinuities in the cross section of structural elements. This way, the purpose of this dissertation is a study of the mechanical response (strength and stiffness), modes (characteristics) of fracture and Residual Strength of an hybrid polymeric composite with and without a geometric discontinuity in its longitudinal section (with a reduction in the cross section) loaded by uniaxial tension. This geometric discontinuity is characterized by central holes of different diameters. The hybrid composite was fabricated as laminate (plate) and consisting of ortho-tereftalic polyester matrix reinforced by 04 outer layers of Jute fibers bidirectional fabrics and 01 central layer of E-glass bidirectional fabric. The laminate was industrially manufactured (Tecniplas Nordeste Indústria e Comércio Ltda.), obtained by the hand lay-up technique. Initially, a study of the volumetric density of the laminate was made in order to verify its use in lightweight structures. Also were performed comparative studies on the mechanical properties and fracture modes under the conditions of the specimens without the central hole and with the different holes. For evaluating the possible influence of the holes in the structural stability of the laminate, the Residual Strength of the composite was determined for each case of variation in hole diameter. As a complementary study, analyses of the macroscopic final fracture characteristic of the laminates were developed. The presence of the central hole of any sizes, negatively changed the ultimate tensile strength. Regarding the elastic modulus, moreover, the difference found between the specimens was within the range of tests displacement, showing the laminate stability related to the stiffness

Vídeo-aula de história da matemática: uma possibilidade didática para o ensino de matemática

In this work we are disagreeing with the possibility of production and of the use of video-class for the disciplines of history of mathematics by the teachers of elementary e middle school as a way to contribute to the development of their classes. Our goal is to provide to the mathematics teachers the option of connecting social, scientific, cognitive, and didactic aspects of topics in math thoughts to their students. That shall be based in the presence of mathematics in the history of humanity. Thus, we consider possible that teachers and their students can link and relate mathematics to other sciences, education culture, and reflect about the many ways of represent them, as well as the patters of organization of nature and of culture. In this way, they shall be able to observe and interpret situations that involve mathematical questions associated to the various means of historic-epistemological studies already done by other researchers and scholars in the field of history of mathematics who works in creating video-classes. In addition to that, we can use all the available media in order to give edifying dynamics to the mathematical formulations established throughout history. In this sense, we are based and focused on the objectives, which are sustained by educational computer technology, techniques for video making, as well as mathematical teaching proposals and the historical inquiring made by Mendes (2001, 2009a, 2009b). The validating experimentation allowed us to conclude that the techniques we used in the production of the history of mathematics video-classes proved they to be valid ones. They are able to be executed with the minimum of technological resources. In addition, they have the same efficacy as far as classroom use

Relações entre mídia e lazer:o capitalismo, os meios e a apropriação do tempo livre nas sociedades industrial e pós-industrial

This research aims to understand the relationship between media, capitalism and ownership of free time for leisure practices in industrial societies and postindustrial. Searching is thus a conceptual framework that takes into account the kind of ideology that naturalizes the relationship of leisure with the foundations of contemporary media, and the media only with leisure, forgetting their insertion in the labor and industrial relations in society. We intend to demonstrate that every mode of production, in the capitalist system, entails a mode of reproduction. Methodologically, this is a first approximation, from theoretical concerns already performed, constituting a theoretical research, bibliographic and descriptive character. The results of the text drives us to the conclusion that the work and leisure spheres tend to be less and less differentiated, since both remain as activities of product management with the same intellective protocols, based on information and communication technology, and that accordingly, the media favors an expansion of productive activity even during leisure time

Por uma "cidade nova": apropriação e uso do solo urbano no terceiro bairro de Natal (1901-1929)

This research aimed to analyze the forms of ownership and use of urban land in Cidade Nova, third official neighborhood of Natal (Rio Grande do Norte), between 1901 and 1929. During this period, the city and state authorities began an urban renewal, trying to transform the city, represent it as a new, modernized, able to track the progress and the new political condition of the capital of a republican state. It is observed in Cidade Nova construction of a new material and symbolic territory: the area that was once occupied by huts built by refugees of drought and some summer houses, was, from 1901, transformed, scanned through a urban plan. In Natal various municipal resolutions published between 1901-1929, showed the desires of the group leader to build on Cidade Nova neighborhood a delightful, modernized its structures to reflect the new political condition of the capital of a republican state. The analyzes of the edicts of the materials published in the newspapers A Republica and Diário do Natal, and especially the study of letters of aforamento, demonstrated how many laws were not enforced or resignified, highlighting the existing continuities. Thus, throughout the paper aims to examine how this territory was occupied and used by its inhabitants, such as the granting of land in aforamento may exemplify this practice and noncompliance and how the land was used to consolidate relations of influence and power. After all, the values given to a space, turning it into territory, resulting from the social dimension of this space, in other words, the social categories that use it. Cannot be, therefore, analyze the ways of appropriation and use of urban land in the third neighborhood of Natal without studying individuals who appropriated and used this territory. The study of the allocation of extant aforamentos of land located in this neighborhood process demonstrated the formation of a specific type of market that were at stake not only economic exchanges, but also, and above all symbolic exchanges involving political and social capital. The analysis of such personnel developed market with the lands of Cidade Nova may indicate the existing relations of power between state government, Stewardship and tenants, providing a significant example of this modernization Natal early twentieth century process, guided by a more wealthy group and influential and characterized by limited social changes

Ecologia alimentar do boto cinza, sotalia guianensis (van banédén, 1864), no litoral do rio grande do norte (rn)

This study investigated factors that influence the group size during the behavior foraging of estuarine dolphin Sotalia guianensis in the coast south of the state Rio Grande do Norte (RN), it also characterized the diet of estuarine dolphins and elaborated an otoliths catalog for aid in the identification of the preys found in the stomach contents. In relation to the group size during behaviour foraging, inside of the Curral Bay, larger frequency of solitary hunt was observed. Factors as tide variation, group composition and seasons didn't present correlation with the number of animals observed during a feeding episode. Capture success for participant was shown significantly larger when the animals hunted alone, what possibly explains the largest frequency of solitary hunt inside of the Curral Bay. About diet, were identified 18 bone fishes species, with predominance of species the families Haemulidae and Sciaenidae and five cephalopods species, including two new species in the diet of Sotalia guianensis in Brazil. Our results indicated that estuarine dolphin in the coast oriental from Rio Grande do Norte (RN) feeds predominantly of fish that form shoal, of habitat estuarino and producing of sounds. The analysis of the images, otoliths of 43 species of coastal fish of the coast of the state of Rio Grande do Norte (RN), aided by the offered descriptions, demonstrated to be an effective methodology for the knowledge of those structures, as well as it represented a form of reducing the subjectivity in the identification of the bone fishes found in stomach content

O Núcleo genuíno lateral dorsal do tálamo do sagüi (callithrix jacchus): Pprojeção retiniana, caracterização citoarquitetônica e neuroquimica da principal estação visual primária.

The thalamus plays an important role in the sensorial processing information, in this particular case, the visual information. Several neuronal groups have been characterized as conductors and processors of important sensorial information to the cerebral cortex. The lateral geniculate complex is one to them, and appears as a group very studied once it is responsible, in almost all totality, for the processing of visual information. Among the nuclei that constitute the lateral geniculate complex we highlight the dorsal lateral geniculate nucleus of the thalamus (DLG), the main thalamic relay for the visual information. This nucleus is located rostral and lateral to medial geniculate nucleus and ventral to thalamic pulvinar nucleus in most of the mammals. In the primates humans and non-humans, it presents as a laminate structure, arranged in layers, when observed in coronal sections. The objective of this work was to do a mapping of the retinal projections and a citoarchictetonic and neurochemical characterization of DLG in the marmoset (Callithrix jacchus), a New World primate. The retinal projections were traced by anterograde transport of subunit b of cholera toxin (CTb), the citoarchicteture was described by Nissl method, and to neurochemical characterization immunohistochemicals technical were used to examine the main neurotransmitters and neuroatives substances present in this neural center. In DGL of marmoset thalamus, in coronal sections labeled by Nissl method, was possible to visualize the division of this nucleus in four layers divided in two portions: magnocellular and parvocellular. The retinal projections were present being visualized fibers and terminals immunorreactives to CTb (IR-CTb) in the DLG ipsilateral and contralateral. And through the immunohistochemicals techniques was observed that DLG contain cells, fibers and/or terminals immunoreactives against neuronal nuclear protein, subunits of AMPA 15 glutamate receptors (GluR1, GluR2/3, GluR4), choline acetyltransferase, serotonin, glutamic acid decarboxylase, binding calcium proteins (calbindin, parvalbumin and calretinin), vasopressin, vasoactive intestinal polypeptide, and an astrocyte protein, glial fibrillary acidic protein.

A relação de amizade nas redes sociais de estudantes universitários de Natal/RN

The basis of sociability in humans is based on cooperation. The relationship of friendship is vital to the social, emotional and cognitive development of an individual and can be understood as a consequence of selection for reciprocal altruism in humans. The period of adulthood is considered very suitable and appropriate for the investigation of the relations of friendship, but the Brazilian literature on friendship in adults is still nascent. Therefore, the objective was to characterize the relationship of friendship among college students. The study gathered 500 students from higher education institutions in the city of Natal-RN, Brazil, and 250 women (average age 24.1 ± 7.66 years) and 250 men (mean age 26.77 ± 9.64 years). Two questionnaires anonymously and individual were applied: a sociodemographic questionnaire and the other with the desired characteristics in idealized friends. Study 1 assessed the degree of importance of characteristics in the process of choosing a friend of the same sex and opposite sex of the participant. Study 2 investigated the relationship between patterns of idealization of friends and self-assessment of participants. Overall, were the preferred characteristics "Companionship" and "Sincerity" to idealized friends. We also found the influence of sex on the characteristics attributed to an female ideal friend, with emphasis on men for "Beauty/Good looks" and "Intelligence" and women to "Companionship" and "Sincerity". Finally, we observed a positive correlation between participants' self-assessment and preferences for the characteristics of the friends devised. This study revealed important elements for understanding the relationship of friendship, specifically the process of choosing friends. The results reinforce the importance of studying the relationship of friendship to a better understanding of human social behavior.

Bem-estar psicológico de servidores e funcionários técnico-administrativos das Instituições de Ensino Superior Públicas e Privadas : indicadores e antecedentes

The elaboration of this thesis aimed at getting to know the structure of the psychological well-being (PWB) at work and analysing the differences in the PWB levels among technical-administrative servants in public and private Institutions of Higher Education (IES) in the municipality of João Pessoa. Two hundred and thirty-three public and private IES male and female servants of João Pessoa participated in the research, replying to an instrument composed of questionnaires referring to the elaborated model. Factorial and regression analyses were accomplished in order to test the hypotheses in respect of the proposed model. The results showed that the PWB related with the work is composed of indicators such as affection, vitality, anxiety, depression, satisfaction at work and aspiration for accomplishment and reduction of the self-efficiency. The observed PWB predictors at work were the IES type, presence of children, age and the escape and back-out facing strategy. These predictors possess relationship of moderation among them in the explanation of PWB. On comparing the PWB experienced by the technical-administrative servants, it was observed that those linked to private IES showed higher PWB rates. Furthermore, there are differences among PWB predictors in accordance with the IES type. The applicability of the results of this thesis is wide as regards social interventions in the search of health improvement under a psycho-sociological perspective. Eventually, the thematic of this thesis intends to reinforce the studies on the worker s health, since by knowing what would lead him into a feeling of accomplishment and well-being will result in more chances of promoting him, while creating opportunities of a sounder life for these people in psychological terms

Precarização do trabalho no setor de supermercados : um estudo de caso com trabalhadores em Natal

Precarization of work, process situated historically after the third Industrial Revolution, express itself as one of the faces of changes in production modus and working conditions. The present study aims to identify the process of work precarization in supermarket sector in Natal municipality. The choice for this sector and professional category is based on low investment in studies on the commercial sector and on technological and administrative transformations that supermarkets have implemented. After a bibliographical review, ten indicators of precarization were chosen which permitted to set up a schedule to interviews and its application to employees of two supermarkets (local companies) in Natal area. The following working functions were chosen to participate in the survey: cashier, display assistant (shelf-stacker) and attendants (N=6). From the interviews we developed an analysis of categorical contents in order to identify the presence of precarization indicators. Categorizations allowed us to identify five major themes: work categorization; work meaning: its attributes; work meaning: work centrality; comments on the employment of apprentices or trainees; and transversal work contents. Such themes contents express or not the presence of precarization process at supermarket sector in Natal area. Precarious work is identified in participants speech when they refer to the employees decreasing power in salaries negotiation between them and employers that institute the precarious work conditions

Desenvolvimento de catalisadores bifuncionais de óxido de zircônio modificado por óxidos de tungstênio e molibdênio contendo platina para a reação de isomerização de n-parafinas

Bifunctional catalysts based on zircon oxide modified by tungsten (W = 10, 15 and 20 %) and by molybdenum oxide (Mo= 10, 15 e 20 %) containg platinum (Pt = 1%) were prepared by the polymeric precursor method. For comparison, catalysts the tungsten base was also prepared by the impregnation method. After calcinations at 600, 700 and 800 ºC, the catalysts were characterized by X-ray diffraction, fourier-transform infrared spectroscopy, thermogravimetric and differential thermal analysis, nitrogen adsorption and scanning electron microscopy. The profile of metals reduction was determined by temperature programmed reduction. The synthesized catalysts were tested in n-heptane isomerization. X-ray diffractogram of the Pt/WOx-ZrO2 and Pt/MoOx-ZrO2 catalysts revealed the presence of tetragonal ZrO2 and platinum metallic phases in all calcined samples. Diffraction peaks due WO3 and ZrO2 monoclinic also were observed in some samples of the Pt/WOx-ZrO2 catalysts. In the Pt/MoOx-ZrO2 catalysts also were observed diffraction peaks due ZrO2 monoclinic and Zr(MoO4)2 oxide. These phases contained on Pt/WOx-ZrO2 and Pt/MoOx-ZrO2 catalysts varied in accordance with the W or Mo loading and in accordance with the calcination temperature. The infrared spectra showed absorption bands due O-W-O and W=O bonds in the Pt/WOx-ZrO2 catalysts and due O-Mo-O, Mo=O and Mo-O bonds in the Pt/MoOx-ZrO2 catalysts. Specific surface area for Pt/WOx-ZrO2 catalysts varied from 30-160 m2 g-1 and for the Pt/MoOx-ZrO2 catalysts varied from 10-120 m2 g-1. The metals loading (W or Mo) and the calcination temperature influence directly in the specific surface area of the samples. The reduction profile of Pt/WOx-ZrO2 catalysts showed two peaks at lower temperatures, which are attributed to platinum reduction. The reduction of WOx species was evidenced by two reduction peak at high temperatures. In the case of Pt/MoOx-ZrO2 catalysts, the reduction profile showed three reduction events, which are attributed to reduction of MoOx species deposited on the support and in some samples one of the peak is related to the reduction of Zr(MoO4)2 oxide. Pt/WOx-ZrO2 catalysts were active in the n-heptane isomerization with high selectivity to 3-methyl-hexane, 2,3- dimethyl-pentane, 2-methyl-hexane among other branched hydrocarbons. The Pt/MoOx-ZrO2 catalysts practically didn't present activity for the n-heptane isomerization, generating mainly products originating from the catalytic cracking

Generalizações do conceito de distância, i-distâncias, distâncias intervalares e topologia

In this dissertation we present some generalizations for the concept of distance by using more general value spaces, such as: fuzzy metrics, probabilistic metrics and generalized metrics. We show how such generalizations may be useful due to the possibility that the distance between two objects could carry more information about the objects than in the case where the distance is represented just by a real number. Also in this thesis we propose another generalization of distance which encompasses the notion of interval metric and generates a topology in a natural way. Several properties of this generalization are investigated, and its links with other existing generalizations