66 resultados para Hidroxiapatita sintética
Resumo:
Drilling fluids have fundamental importance in the petroleum activities, since they are responsible for remove the cuttings, maintain pressure and well stability, preventing collapse and inflow of fluid into the rock formation and maintain lubrication and cooling the drill. There are basically three types of drilling fluids: water-based, non-aqueous and aerated based. The water-based drilling fluid is widely used because it is less aggressive to the environment and provide excellent stability and inhibition (when the water based drilling fluid is a inhibition fluid), among other qualities. Produced water is generated simultaneously with oil during production and has high concentrations of metals and contaminants, so it’s necessary to treat for disposal this water. The produced water from the fields of Urucu-AM and Riacho da forquilha-RN have high concentrations of contaminants, metals and salts such as calcium and magnesium, complicating their treatment and disposal. Thus, the objective was to analyze the use of synthetic produced water with similar characteristics of produced water from Urucu-AM and Riacho da Forquilha-RN for formulate a water-based drilling mud, noting the influence of varying the concentration of calcium and magnesium into filtered and rheology tests. We conducted a simple 32 factorial experimental design for statistical modeling of data. The results showed that the varying concentrations of calcium and magnesium did not influence the rheology of the fluid, where in the plastic viscosity, apparent viscosity and the initial and final gels does not varied significantly. For the filtrate tests, calcium concentration in a linear fashion influenced chloride concentration, where when we have a higher concentration of calcium we have a higher the concentration of chloride in the filtrate. For the Urucu’s produced water based fluids, volume of filtrate was observed that the calcium concentration influences quadratically, this means that high calcium concentrations interfere with the power of the inhibitors used in the formulation of the filtered fluid. For Riacho’s produced water based fluid, Calcium’s influences is linear for volume of filtrate. The magnesium concentration was significant only for chloride concentration in a quadratic way just for Urucu’s produced water based fluids. The mud with maximum concentration of magnesium (9,411g/L), but minimal concentration of calcium (0,733g/L) showed good results. Therefore, a maximum water produced by magnesium concentration of 9,411g/L and the maximum calcium concentration of 0,733g/L can be used for formulating water-based drilling fluids, providing appropriate properties for this kind of fluid.
Resumo:
Base excision repair (BER) proteins has been associated with functions beyond DNA repair. Apurynic/apyrimidinic endonuclease 1 (APE1) is a multifunctional protein involved in a plethora of cellular activities, such as redox activation of transcription factors, RNA processing and DNA repair. Some studies have described the action of the protein 8-oxoguanine (OGG1) in correcting oxidized lesions in promoters as a step in the transcription of pro-inflammatory cytokines. Despite being especially important in redox activation of transcription factors such as nuclear factor κB (NF-κB) and AP- 1, the repair activity of APE1 has not yet been associated with the inflammatory response. In this study, experimental and bioinformatic analysis approaches have been used to investigate the relationship between inhibition of the repair of abasic sites in DNA by MX, a synthetic molecule designed to inhibt the repair activity of APE1, and the modulation of the inflammatory response. The results showed that treatment of monocytes with lipopolysaccharide (LPS) and MX reduced the expression of cytokines, chemokines and toll-like receptors, and negatively regulated biological immune processes, as macrophages activation, and NF-κB and tumor necrosis factor (TNF-α) and interferon pathways, without inducing cell death. The transcriptomic analysis suggests that LPS/MX treatment induces mitochondrial dysfunction, endoplasmic reticulum stress and activation of autophagy pathways, probably activated by impairment of cellular energy and/or the accumulation of nuclear and mitochondria DNA damage. Additionally, it is proposed that the repair activity of APE1 is required for transcription of inflammatory genes by interaction with abasic sites at specific promoters and recruitment of transcriptional complexes during inflammatory signaling. This work presents a new perspective on the interactions between the BER activity and the modulation of inflammatory response, and suggests a new activity for APE1 protein as modulator of the immune response in a redox-independent manner.
Resumo:
Produced water is considered the main effluent of the oil industry, due to their increased volume in mature fields and its varied composition. The oil and grease content (TOG) is the main parameter for the final disposal of produced water. In this context, it is of great significance to develop an alternative method based on guar gum gel for the treatment of synthetic produced water, and using as the differential a polymer having high hydrophilicity for clarifying waters contaminated with oil. Thus, this study aims to evaluate the efficiency of guar gum gels in the remotion of oil from produced water. Guar gum is a natural polymer that, under specific conditions, forms three-dimensional structures, with important physical and chemical properties. By crosslinking the polymer chains by borate ions in the presence of salts, the effect salting out occurs, reducing the solubility of the polymer gel in water. As a result, there is phase separation with the oil trapped in the collapsed gel. The TOG was quantified from the spectroscopy in the ultraviolet and visible region. The system was proven to be highly efficient in the removal of dispersed oil from water produced synthetically, reaching removal percentages above 90%.
Resumo:
In line with the model of grammar competition (Kroch, 1989; 2001), according to which the change in the syntactic domains is a process that develops via competition between different grammars, we describe and analyze the superficial constructions V2 / V3 in matrices / roots sentences of brazilian personal letters of the 19th and 20th centuries. The corpus, composed by 154 personal letters of Rio de Janeiro and Rio Grande do Norte, is divided into three century halves: (i) latter half of the 19th century; (ii) first half of the 20th century; and (iii) latter half of the 20th century. Our focus was the observation of the nature of preverbal constituents in superficial constructions V2 (verb in second position in the sentence) and V3 (verb in third position in the sentence), with a special attention on the position of the subject. Based on the various diachronical studies about the Portuguese ordination standards (Ambar (1992); Ribeiro (1995, 2001); Paixão de Sousa (2004); Paiva (2011), Coelho and Martins (2009, 2012)), our study sought to realize what are empirical ordination standards that involve superficial constructions V2 / V3 and how these patterns structure syntactically within a formal theoretical perspective (Chomsky, 1981; 1986), more specifically, in accordance with studies of Antonelli (2011), and Costa & Galves (2002). The survey results show that the data from the second half of the 19th century – unlike the first and second half of the 20th century data – have a greater balance in relation to the syntactic nature of preverbal constituent (contiguous or not), so that, in this period, the occurrence of orders with the subject in a preverbal position arrives at, at most, 52% (231/444 data); while in the 48% (213/444 data) remaining, the preverbal constituents are represented by a non-subject constituent, almost always an adverbial adjunct. Seen the results, we advocate that the brazilian personal letters of the 19th century have ordination patterns associated with a V2 system and an SV system, configuring, therefore, a possible competition process between different grammars that instantiate or a V2 system or an SV system. In other words, the brazilian letters of the 19th century instantiate a competition between the grammar of Classic Portuguese (a V2 system) and the grammars of Brazilian Portuguese and European Portuguese (an SV system). Therefore, that period is subject to the completion of two distinct parametric markings: (i) verb moved to the Fin core (grammar of Classic Portuguese) and (ii) verb moved to the T core (grammar of Brazilian Portuguese /European Portuguese). On the other hand, in the personal letters of the 20th century (first and second halves), there is a clear increase in ordenation patterns associated with the SV system, which shows more stable.
Resumo:
The produce of waste and the amount of the water produced coming from activities of petroleum production and extraction has been a biggest challenge for oil companies with respect to environmental compliance due to toxicity. The discard or the reuse this effluent containing organic compounds as BTEX (benzene, toluene, ethylbenzene and xylene) can cause serious environmental and human health problems. Thus, the objective this paper was study the performance of two process (separately and sequential) in one synthetic effluent for the benzene, toluene and xylene removal (volatile hydrocarbons presents in the produced water) through of electrochemical treatment using Ti/Pt electrode and exchange resin ionic used in the adsorption process. The synthetic solution of BTX was prepared with concentration of 22,8 mg L-1, 9,7 mg L-1 e 9,0 mg L-1, respectively, in Na2SO4 0,1 mol L-1. The experiments was developed in batch with 0.3 L of solution at 25ºC. The electrochemical oxidation process was accomplished with a Ti/Pt electrode with different current density (J = 10, 20 e 30 mA.cm-2). In the adsorption process, we used an ionic exchange resin (Purolite MB 478), using different amounts of mass (2,5, 5 and 10 g). To verify the process of technics in the sequential treatment, was fixed the current density at 10 mA cm-2 and the resin weight was 2.5 g. Analysis of UV-VIS spectrophotometry, chemical oxygen demand (COD) and gas chromatography with selective photoionization detector (PID) and flame ionization (FID), confirmed the high efficiency in the removal of organic compounds after treatment. It was found that the electrochemical process (separate and sequential) is more efficient than absorption, reaching values of COD removal exceeding 70%, confirmed by the study of the cyclic voltammetry and polarization curves. While the adsorption (separately), the COD removal did not exceed 25,8%, due to interactions resin. However, the sequential process (electrochemical oxidation and adsorption) proved to be a suitable alternative, efficient and cost-effectiveness for the treatment of effluents petrochemical.
Resumo:
Metal Organic Frameworks (MOFs) are hybrids materials, often crystalline, consisting of metal or metal clusters, connected by polytopic organic ligands repetitively, leading to structures, usually porous. In this work, MOFs based on lanthanide ions (La3+ and Gd3+) and dicarboxylate type of ligands (isophthalic and terephthalic acids), were synthesized by hydrothermal, solvothermal and hydro(solvo)thermal methods. The effects of the synthetic route as well as the type of heating, conventional or by microwave, on the structure and properties of MOFs were studied. The powder samples obtained were characterized by X-ray diffraction, infrared spectroscopy, thermal analysis and scanning electron microscopy. The results suggest that the addition of an organic or inorganic base is needed to promote the deprotonation of the ligand, since in the samples prepared by the hydrothermal method, without the use of a base, no formation of the metalorganic framework was observed. On the other hand, the presence of DMF as solvent or cosolvent, afforded the deprotonation of the ligand with the consequent formation of MOFs. At least two different crystalline structures were identified for the samples prepared with terephthalic acid. These samples are isostructural with those reported for phases Eu(1,3-BDC)DMF, Eu2(1,4-BDC)3 (DMF)2 and Tb(1,4-BDC)H2O. The presence of water in the reaction medium in the hydro(solvo)thermal method, provoked the growth of the structure different from that observed in the absence of water. This can be explained by the difference in the coordination mode of water and DMF to lanthanide ions. Although not identified by XRD, the samples prepared with isophthalic acid, also present metalorganic structures, which was confirmed by the presence of the characteristic displacement of the carbonyl group band in their infrared spectra, compared to the spectrum of the pure ligand. This shift was also observed in the samples prepared with terephthalic acid. Thermal analisys shows that the metal organic frameworks do not collapse occurs at a temperature below 430°C.The analysis of scanning electron microscopy suggests that the morphology of powders is highly dependent on the type of heating used, conventional or by microwave.
Resumo:
The treatment of wastewater is essential to human health. One of the most important steps is the disinfection treatment which uses chlorine to eliminate bacteria as required by environmental agencies. However, the identification of potentially toxic byproducts generated by this method, such as trihalomethanes, has stimulated the development of new alternative disinfection technologies. Among them, heterogeneous photocatalysis, TiO2 photocatalysis and electrochemical disinfection are considered suitable alternatives to the chlorination method. Thus, the present dissertation analyzes the evolution of active chlorine species in a synthetic NaCl solution and it is tested to treat a synthetic solution of the dye Reactive Blue 19 using boron-doped diamond (BDD) and ruthenium oxide (Ti/Ru0.3Ti0.7O2) as anodes. The indirect electrochemical process was discussed in terms of mineralization of the total organic load and percentage of color removal in order to evaluate the applicability of electrochemical technology. Electrochemical experiments were carried out with different current densities (25, 50 and 75 mA.cm-2) during 120 minutes. On the other hand, other important parameter in this study was the influence of the proportion sp3/sp2 on BDD anode on the performance of the evolution of active chlorine species which was investigated by electrolytic techniques (linear polarization), with the intention of determining the related training oxidizing species and consumption energy to chemical or electrochemical reactions. From the results, it can be noted that the BDD electrode showed better efficiency throughout the electrochemical process.
Resumo:
The treatment of wastewater is essential to human health. One of the most important steps is the disinfection treatment which uses chlorine to eliminate bacteria as required by environmental agencies. However, the identification of potentially toxic byproducts generated by this method, such as trihalomethanes, has stimulated the development of new alternative disinfection technologies. Among them, heterogeneous photocatalysis, TiO2 photocatalysis and electrochemical disinfection are considered suitable alternatives to the chlorination method. Thus, the present dissertation analyzes the evolution of active chlorine species in a synthetic NaCl solution and it is tested to treat a synthetic solution of the dye Reactive Blue 19 using boron-doped diamond (BDD) and ruthenium oxide (Ti/Ru0.3Ti0.7O2) as anodes. The indirect electrochemical process was discussed in terms of mineralization of the total organic load and percentage of color removal in order to evaluate the applicability of electrochemical technology. Electrochemical experiments were carried out with different current densities (25, 50 and 75 mA.cm-2) during 120 minutes. On the other hand, other important parameter in this study was the influence of the proportion sp3/sp2 on BDD anode on the performance of the evolution of active chlorine species which was investigated by electrolytic techniques (linear polarization), with the intention of determining the related training oxidizing species and consumption energy to chemical or electrochemical reactions. From the results, it can be noted that the BDD electrode showed better efficiency throughout the electrochemical process.
Resumo:
This thesis investigates materialization strategies of non-assumption of enunciation responsibility and inscription of an authorial voice in scientific articles produced by initial researchers in Linguistics. The specific focus lays on identify, describe and interpret: i) linguistics marks that assign enunciation responsibility; ii) the positions taken by the first speaker-enunciator (L1/E1) in relation to points of view (PoV) imputed to second enunciators (e2); and iii) the linguistic marks that assign the formulation of themselves' PoV. As a practical deployment, it is proposed to discuss how to teach taking into account text discursive strategies regarding to enunciation responsibility and also authorship in academic and scientific texts. Our research corpus is formed by eight scientific essays and they were selected in a renamed Linguistics scientific magazine which is high evaluated by Qualis/CAPES (Brazil Science Agency). The methodology follows the assumptions of a qualitative research, and an it has such an interpretative basis, even though it takes support in a quantitative approach, too. Theoretically, we based this research on Textual Analysis of Speech and linguistics theories about linguistic enunciation area. The results show two kinds of movements in PoV management: imputation and responsibility. In imputation contexts, the most recursive linguistic marks were reported speech, indirect speech, reported speech with “that”, modalization in reported speech (in enunciation with “according to”, “in agreement with”, “for”), beyond that we see certain points of non-coincidences of speech, specifically the non-coincidence of the speech itself. The way those linguistic marks occur in the text point out three kinds of enunciation positions that are assumed by L1/E1 in relation to PoV of e2: agreement, disagreement and a pseudo neutrality. It was clearly recursive the imputation followed by agreement (explicit or not), this perspective puts other’s voices to defend a speech assumed like own authorship. In speech responsibility contexts, we observed such a formulation of inner PoV that results from theoretical findings undertaken by novice researchers (revealing how he/she interpreted concepts of the theory) or arising from their research data, allowing them to express with more autonomy and without reporting to speeches from e2. Based on those data, we can say that, in text by initial researchers, the authorship is strongly built upon PoV and also dependent from others' words (theory and the scholars quoted there), taking into account that many contexts in which we can observe agreement position, PoV formulations with words taken from e2 and assumed as own words by syntactic integration, the comments about what the other says, the absence of explanations and additions, as well as a data analysis that could show agreement with the theory used to support the work. These results allow us to visualize how initial researcher dialogs with the theoretical enunciation sources he or she takes as support and how he/she displays the status of a subject doing a research and positioning himself/herself as a researcher/author in the scientific field. In assuming the reported speech, when quoting, as a resource that allows the enunciation responsibility and also when doing evidence to the positions of speaker-enunciator in relation do reported PoV, this suggests to a textual-discursive treatment of quoting in academic and scientific text, in a context of teaching that gives attention to the development of communication skills of initial researcher and that can contribute to insert and interact students in the scientific field.
Resumo:
This thesis investigates materialization strategies of non-assumption of enunciation responsibility and inscription of an authorial voice in scientific articles produced by initial researchers in Linguistics. The specific focus lays on identify, describe and interpret: i) linguistics marks that assign enunciation responsibility; ii) the positions taken by the first speaker-enunciator (L1/E1) in relation to points of view (PoV) imputed to second enunciators (e2); and iii) the linguistic marks that assign the formulation of themselves' PoV. As a practical deployment, it is proposed to discuss how to teach taking into account text discursive strategies regarding to enunciation responsibility and also authorship in academic and scientific texts. Our research corpus is formed by eight scientific essays and they were selected in a renamed Linguistics scientific magazine which is high evaluated by Qualis/CAPES (Brazil Science Agency). The methodology follows the assumptions of a qualitative research, and an it has such an interpretative basis, even though it takes support in a quantitative approach, too. Theoretically, we based this research on Textual Analysis of Speech and linguistics theories about linguistic enunciation area. The results show two kinds of movements in PoV management: imputation and responsibility. In imputation contexts, the most recursive linguistic marks were reported speech, indirect speech, reported speech with “that”, modalization in reported speech (in enunciation with “according to”, “in agreement with”, “for”), beyond that we see certain points of non-coincidences of speech, specifically the non-coincidence of the speech itself. The way those linguistic marks occur in the text point out three kinds of enunciation positions that are assumed by L1/E1 in relation to PoV of e2: agreement, disagreement and a pseudo neutrality. It was clearly recursive the imputation followed by agreement (explicit or not), this perspective puts other’s voices to defend a speech assumed like own authorship. In speech responsibility contexts, we observed such a formulation of inner PoV that results from theoretical findings undertaken by novice researchers (revealing how he/she interpreted concepts of the theory) or arising from their research data, allowing them to express with more autonomy and without reporting to speeches from e2. Based on those data, we can say that, in text by initial researchers, the authorship is strongly built upon PoV and also dependent from others' words (theory and the scholars quoted there), taking into account that many contexts in which we can observe agreement position, PoV formulations with words taken from e2 and assumed as own words by syntactic integration, the comments about what the other says, the absence of explanations and additions, as well as a data analysis that could show agreement with the theory used to support the work. These results allow us to visualize how initial researcher dialogs with the theoretical enunciation sources he or she takes as support and how he/she displays the status of a subject doing a research and positioning himself/herself as a researcher/author in the scientific field. In assuming the reported speech, when quoting, as a resource that allows the enunciation responsibility and also when doing evidence to the positions of speaker-enunciator in relation do reported PoV, this suggests to a textual-discursive treatment of quoting in academic and scientific text, in a context of teaching that gives attention to the development of communication skills of initial researcher and that can contribute to insert and interact students in the scientific field.
Resumo:
Contamination of groundwater by BTX has been featured in recent decades. This type of contamination is due to small and continuous leaks at gas stations, causing serious problems to public health and the environment. Based on these antecedents, the search for new alternatives for treating contaminated water is shown to be essential. Therefore, this study aimed to evaluate the efficiency of removal of BTX by adsorption processes employing commercial alumina (Al2O3) and alumina supported with iron (Fe/Al2O3) as adsorbents. It was prepared by a in a synthetic gasoline solution and distilled water to simulate an actual sample. Initially, the adsorbents were characterized by techniques XRD, TG / DTG, XRF, FTIR and SEM/EDS, several trials, where he was placed synthetic solution to react in the presence of Al2O3 and Fe/Al2O3 in a closed, mechanical stirring system were performed varying the catalyst concentration 2, 4 and 6 g.L-1 every 0, 10, 30 60, 90 and 120 min, aliquots were taken and brought to analysis by gas chromatography flame ionization with headspace extraction. The results indicated that the absorbent which has higher BTX removal capacity was the Fe/Al2O3 at a concentration of 6 g.L-1, pH = 4 and time of 90 minutes reaction, resulting in an efficiency, resulting in a 86,5% efficiency for benzene removal, for the 95,4% toluene, 90,8% for ɱ,ρ- xylene and 93.7% for the θ-xylenes. Subsequently, we performed a kinetic study of the reactions, the values of experimental adsorption capacity (qe) showed agreement with the values of the theoretical adsorption capacity (qc) to the pseudo-second-order model in the adsorption tests using 2 and 6 gL-1 of Al2O3 and assays using 2, 4 and 6 g.L-1 of Fe/Al2O3. A fact corroborated by the R2 values, thus indicating that the chemical interactions are present in the adsorption mechanisms of BTX.
Resumo:
This thesis presents the synthesis, characterization and study of the associative behaviour in aqueous media of new responsive graft copolymers, based on carboxymethylcellulose as the water-soluble backbone and Jeffamine® M-2070 e Jeffamine® M-600 (commercial polyetheramines) as the thermoresponsive grafts with high cloud point temperatures in water. The synthesis was performed on aqueous medium, by using 1-ethyl-3- (3-(dimethylamino)-propyl)carbodiimide hydrochloride and N-hydroxysuccinimide as activators of the reaction between carboxylategroupsfrom carboxymethylcellulose and amino groups from polyetheramines. The grafting reaction was confirmed by infrared spectroscopy and the grafting percentage by 1H NMR. The molar mass of the polyetheramines was determined by 1H NMR, whereas the molar mass of CMC and graft copolymers was determined by static light scattering. The salt effect on the association behaviour of the copolymers was evaluated in different aqueous media (Milli-Q water, 0.5M NaCl, 0.5M K2CO3 and synthetic sea water), at different temperatures, through UV-vis, rheology and dynamic light scattering. None of the copolymers solutions, at 5 g/L, turned turbid in Milli-Q water when heated from 25 to 95 °C, probably because of the increase in hydrophibicity promoted by CMC backbone. However, they became turbid in the presence of salts, due to the salting out effect, where the lowest cloud point was observed in 0.5M K2CO3, which was attributed to the highest ionic strength in water, combined to the ability of CO3 2- to decrease polymer-solvents interactions. The hydrodynamic radius and apparent viscosity of the copolymers in aqueous medium changed as a function of salts dissolved in the medium, temperature and copolymer composition. Thermothickening behaviour was observed in 0.5M K2CO3 when the temperature was raised from 25 to 60°C. This performance can be attributed to intermolecular associations as a physical network, since the temperature is above the cloud point of the copolymers in this solvent.
Resumo:
VANTI, Nadia et al. Linguagens de indexação: uso das linguagens presentes na prática da indexação.In:ENCONTRO REGIONAL DE ESTUDANTES DE BIBLIOTECONOMIA, DOCUMENTAÇÃO, CIÊNCIA DA INFORMAÇÃO E GESTÃO DA INFORMAÇÃO,14, 2011, Maranhão. Anais... Maranhão: EREBD, 2011.
Resumo:
This study intends to enhance the existing knowledge concerning the patterns of the uses of space for low cost housing in Parnamirim, Rio Grande do Norte, Brazil, by way of comparative morphological studies in spatial arrangements and articulations regarding three distinct, however inter-related, sets of social housing: (1) a development comprising 21 self-built houses erected on public routes and illegal plots within a tract of land originally designed to be an industrial development: (2) architect-designed houses built by the public authority in order to accommodate the previous 21 (plus a few additions) families occupying the self-built dwellings, and (3) modifications performed by dwellers on a total of those 24 houses built by the public authority after an occupation period of one year. The predominant uses of each room within the self-built and modified houses were represented in ground plan, based on empirical observation, surveys with dwellers and the use of analytical procedures of morphologic analysis of nature predominantly geometric (specific) and topology (space syntax analysis). A scale of priorities was identified in relation to the uses of each room, its geometrical arrangement (adjacency, front/back relations etc), and underlying structures (connectivity, depth and spatial integration) in order to establish congruencies and non-congruencies between a social-cultural order embedded in the self-built domestic space and the design logic contained in the houses offered by official agencies. The comparative analysis points towards the convivial existence of two tendencies: one that seems to reinforce a design logic inasmuch as the additions and modifications performed by the dwellers do not alter but even emphasize the original configuration of the designed houses, and another one in which those patterns are subverted in accordance with a logic which, to a lesser or greater degree, coincides with that of the self-built dwellings
Resumo:
This research aims to study dimensions of urban life in the contemporaneous city. It is an effort to understand the functioning of the contemporary city as an artifact that somehow affects social relations. The study focuses on the limits and possibilities of urbanity in the city today, understanding urbanity as a set of factors that favor wealth, diversity and spontaneity of public life. The research aims to show that cities today tend to criate fragmented urban life into at least one of the three urbanity dimensions: spatial dimension, social and temporal dimension. The study involves the analysis of two public spaces in Fortaleza (Praça do Ferreira and the open urban public spaces of the Centro Cultural Dragão do Mar), using Space Syntax Analysis methods and for Post Occupancy Evaluation procedures. Research shows that temporal dimension of urbanity is limited in the public spaces studied. In Praça do Ferreira, spatial and social dimensions are present, but their effects are limited by the temporal dimension. The Dragão do Mar, on the other hand, the spatial and social dimensions of urban life are more limited and more concentrated in time