39 resultados para deficiência marginal de zinco
Resumo:
The number of disabled students, who have entered the university, in Brazil, since the beginning of this century, is undergoing a speed growth. It is a change that follows a global trend that spreads an inclusive education policy and that has had a profound impact on Brazil, with import results in field researches. This subject has been highlighted due to the significant amount of disabled students enrolled in college institutions (IES), although it is still modest the number of studies about it, especially in what matters the assistance given to the candidates to a university entrance examination. The aim of this paper is to investigate how effectively Natal s IES apply the rules established in Brazilian law concerning disabled students, especially MEC/GM Circular Warning n. 277/96, in what respects the conditions given to disabled students preparing to enter a college. The investigation followed a qualitative methodological approach with support on an exploratory study. The data recollection employed questionnaire, semi-structured interview and documental analyses, and the data have been organized and assessed following Minayo s (1996) stages. What concerns the results, it was observed that none of the ten colleges inquired confirmed to possess places exclusively to disabled candidates; six of them, however, offer Special Examining Board in the selection process of disabled candidates. Among eighteen college bills, only two of them offered specific information related to services and resources offered by IES to the candidates who ask for especial assistance concerning examination. During the interviews, four managers avowed the preoccupation in offering an equal selection process, but two of them proved not dominate the subject. In conclusion, the investigated institutions managers do not still seem to respect the rule that guarantees to disabled candidates equal conditions during all the process of the university entrance examination. With this work, we hope do help changing this focus and contribute to new studies on disabled persons studying for a degree
Resumo:
The objective of analyze the shift of the working process of the ESF team in care of children with disabilities, from awareness-raising actions. It is a qualitative study, with the action-research method. Thirteen health professionals were involved from two teams of ESF unit area of the Unidade de Saúde da Família Dr. Chico Porto (UBSFCP) in Mossoró, from March to August 2011. Data were analyzed following the direction of freirean s thematic analysis. In the situational diagnosis of the current reality of CwD assistance in that UBSFCP, through participant observation and application of semi-structured interviews with professionals, we realize that despite these actions carry some assistance to the CwD, in practice few are used for inclusion and accessibility. The monitoring of the CwD is done through individual consultations by each team professional, home visits when possible, both ruled on the complaints and problems, with little solving in the used actions. Since the need for a change in the treatment model and training requirements as pointed out by professionals in the interview, then we decided to build the proposed of training suggested by the multidisciplinary team and put together collectively the achievement of this moment in all its phases. In the step of implementation (action), aspects related to the current situation in Brazil and Mossoró (Laws, policies and health care) for the CwD and CwD Assistance and their family in the ESF in the first two moments of the first training (action) were contemplate. On the second day we discussed the specialized care to CwD, contribution of the Handicapped Parents and Friends Association of Mossoró and in a second moment a workshop was held in which awareness for inclusion of CwD and actions of ESF were discussed. All these moments were discussed and collectively constructed. In the evaluation, we found that implementation (action) allowed to the professional the comprehension of new understandings about people with disabilities, on ways to include, guiding, caring, watching, and mainly to have a new vision on health assistance of the CwD, expanding assistance beyond clinical aspects and recognizing the educational aspects of the rights and duties of citizens and the inclusion of these children in the social spaces area. As difficulties, we face the need for some professionals to be absent to attend another job, solve personal problems, and little or no participation. Thus, during this action-research, the subjects were able to realize the importance of carrying out their practice to the quality of life for him and to the one they care
Resumo:
This study evaluates the level of accessibility for people with visual impairment (blindness and low vision) hotels in the city of Natal-RN, Brazil, and provides principles, guidelines and means of projective make hotels accessible, to promote comfort, autonomy and security of these people. We used a qualitative research methodology and quantitative trait descriptive, analytical and interpretive. Was taken as a base for field studies Ergonomic Analysis of Work, beginning with a study of the demands of accessibility of hotels and analyzing the modeling activity in these establishments through the application of interactional and observational techniques, such as film, photographic records, conversational actions and observation protocols. A protocol was developed and applied to evaluate the compliance of accessibility of hotels in the face of Brazilian technical standard NBR 9050 (2004). We used methods of Cognitive Task Analysis (CTA) associated with simulated activities to identify the processes of decision making and analyzing the observables of the activities performed by people with visual impairment (POS). Interviews were conducted with people who are blind and low vision in various cities in order to meet accessibility difficulties they faced in hotels and recommendations for improvement that they indicate. The mapping results showed that of 16 hotels 4 and 5 star studied in Natal-RN, reached only 7% of the 50 items of the protocol, while none of them reached 70% of the items. About the results obtained in simulated activities and analyzed from the ATC, we saw that the hotel where it was performed this step shows a need to adequately address the guests with visual impairments
Resumo:
Currently, vegetable oils have been studied for bio-lubricants base that fits the new environmental standards. Since, in a world full of finite natural resources, mineral oils bring consequences to the environment due to its low biodegradability and toxicity, also it is important to consider that synthetic oils have a high cost The aim of this work is to obtain a biolubricant additived with oxide nanoparticles (ZnO and CuO) for better resistance to friction and wear, which is not toxic to the environment and have better adherence under boundary lubrication. The methodology consisted in the synthesis of bio-lubricants (soybean and sunflower base) by epoxidation reaction. Then, some physical-chemical analysis in bio-lubricants are made to characterize theses lubricants, such as, density, acidity, iodine value, viscosity, viscosity index. Later, the lubricants were additive with nanoparticles. The tribological performance was evaluated by the equipment HFRR (High Frequency Reciprocating Rig) consisting of a wear test ball-plan type. The characterization of wear analysis was performed by SEM / EDS. The results show that bio-lubricants may be synthesized by reaction of epoxidation with good conversion. Tribological point of view, the epoxidized oils are more effective than lubricant additived with the oxide nanoparticles, they had lower coefficients of friction and better rate of film formation in the study. However, because they are environmentally friendly, bio-lubricants gain the relevant importance in tribological field
Resumo:
Discussions about pollution caused by vehicles emission are old and have been developed along the years. The search for cleaner technologies and frequent weather alterations have been inducing industries and government organizations to impose limits much more rigorous to the contaminant content in fuels, which have an direct impact in atmospheric emissions. Nowadays, the quality of fuels, in relation to the sulfur content, is carried out through the process of hydrodesulfurization. Adsorption processes also represent an interesting alternative route to the removal of sulfur content. Both processes are simpler and operate to atmospheric temperatures and pressures. This work studies the synthesis and characterization of aluminophosphate impregnate with zinc, molybdenum or both, and its application in the sulfur removal from the gasoline through the adsorption process, using a pattern gasoline containing isooctane and thiophene. The adsorbents were characterized by x-ray diffraction, differential thermal analysis (DTG), x-ray fluorescence and scanning electron microscopy (SEM). The specific area, volume and pore diameter were determined by BET (Brunauer- Emmet-Teller) and the t-plot method. The sulfur was quantified by elementary analysis using ANTEK 9000 NS. The adsorption process was evaluated as function of the temperature variation and initial sulfur content through the adsorption isotherm and its thermodynamic parameters. The parameters of entropy (ΔS), enthalpy variation (ΔH) and free Gibbs energy (ΔG) were calculated through the graph ln(Kd) versus 1/T. Langmuir, Freundlich and Langmuir-Freundlich models were adjusted to the experimental data, and the last one had presented better results. The thermodynamic tests were accomplished in different temperatures, such as 30, 40 and 50ºC, where it was concluded the adsorption process is spontaneous and exothermic. The kinetic of adsorption was studied by 24 h and it showed that the capability adsorption to the adsorbents studied respect the following order: MoZnPO > MoPO > ZnPO > AlPO. The maximum adsorption capacity was 4.91 mg/g for MoZnPO with an adsorption efficiency of 49%.
Resumo:
Abstract: Several factors can affect the development of the broiler, among them we can highlight nutrition and management. In the context nutritional, mineral supplementation is a necessary practice because, in general, the diets did not contain these elements in sufficient quantity to meet the needs of poultry. Zinc is a trace mineral essential to life, participating in several important functions in the body. Generally zinc is added to diets of birds in inorganic forms (oxides, carbonates or sufatos), however in its organic form or chelated presents more bioavailable. The objective of this study was to evaluate the effect of levels of organic zinc (ZnO) in the diet of broilers from 1 to 42 days, housed in new or reused litter. The experiment was conducted in the poultry sector of the Special Unit for Agricultural Sciences EAJ / UFRN. 576 chicks were used 1 day of commercial strain Cobb, distributed in a completely randomized in a 4x2 factorial arrangement with four levels of ZnO 0, 40, 80 and 120 ppm and two environments, new bed (COn) and reused litter (CRE) resulting in eight treatments with six replications of 12 birds. In the pre-initial responses were linearly increasing levels of ZnO on feed intake and quadratic effect on body weight and weight gain. The levels of 72.41 and 70.05 ppm of ZnO in the diet of chicks improved body weight and weight gain, respectively. There was interaction between ZnO and the type of bedding used. The ZnO did not affect broiler performance in the growing phase. There was an interaction between levels of ZnO and type of bed used. The levels of 61.50 and 85.30 ppm organic zinc improves immunity and increases the deposition of zinc in tibia of broilers at 42 days, respectively. ZnO also increases the resistance of the skin of broilers at 42 days of age. Using Cre improves performance of broilers from 1 to 42 days old
Resumo:
To overcome the challenge of meeting growing energy demand in a sustainable way, biodiesel has shown very promising as alternative energy can replace fossil fuels, even partially. Industrially, the biodiesel is produced by homogeneous transesterification reaction of vegetable oils in the presence of basic species used as catalysts. However, this process is the need for purification of the esters obtained and the removal of glycerin formed after the reaction. This context, the alternative catalysts have that can improve the process of biodiesel production, aiming to reduce costs and facilitate its production. In this study, the AlSBA-15 support with Si / Al ratio = 50 was synthesized, as like as the heterogeneous catalysts of zinc oxide and magnesium supported on mesoporous AlSBA-15 silica, in the concentrations of 5, 10, 15 and 30 %, relative to the support. The textural properties and structural characterization of catalysts and supports were determined by techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) coupled to the chemical analyzer, adsorption / desorption of N2, thermal analysis (TG / DTG), absorption spectroscopy in the infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Characterization results indicated that the support AlSBA-15 retained the hexagonal ordered after the incorporation of zinc oxide and magnesium oxide in the holder. For heterogeneous catalysts, ZnO-AlSBA-15, that was observed the presence of zinc oxide nanoparticles dispersed in the surface and interior channels of the mesoporous and microporous support. The catalytic activity was evaluated by the transesterification reaction of sunflower oil via methylic route, and some reaction parameters were optimized with the most active catalyst in biodiesel production by sunflower oil. For the series of heterogeneous catalysts, the sample with 30 % ZnO supported on AlSBA-15 showed a better conversion of triglyceride to methyl esters, about 95.41 % of reaction conditions: temperature 175 °C, with molar ratio of 42:1, stirring at 200 rpm and under a pressure of 14 bar for 6 h. The catalyst MgO-AlSBA-15 showed no catalytic activity in the studied reactions
Resumo:
Metal Organic Frameworks (MOFs) are supramolecular structures consisted of ions or metal clusters coordinated to organic ligands which are repeated in two or three dimensions. These structures have atracted much attention due to their properties such as low density, high specific surface area and large volume of pores. In this work, MOFs consisted of zinc clusters connected by ditopic ligands, terephthalic acid (1,4- H2BDC) or isophthalic acid (1,3-H2BDC) were synthesized. To obtain the proposed materials, different routes and synthetic parameters were tested, such as the molar ratio of the precursors, the addition of template molecules, the type of solvente, the addition of organic base or the type of a counter-ion of Zn salt. It was found that the variation of these parameters led to the formation of different metalorganic structures. The solids obtained were characterized by XRD, SEM and IR. For the samples identified as MOF- 5, it was verified that the structure was composed of both interpenetrated and non interpenetrated structures. These samples showed a low stability, becoming totally transformed into another structure within less than 72 hours. The addition of the nickel and/or cobalt was found to be a promissing method for increasing the stability of MOF- 5, which in this case, still remained unconverted to another structure even after 15 days of exposure to air. The samples prepared from 1,3-H2BDC were probably new, still unknown Metal Organic Frameworks
Resumo:
Among the non-invasive techniques employed in the prevention of caries highlights the sealing pits and fissures which is a conservative maneuver, in order to obliterate them to protect them from attack acid bacteria. Influenced by the studies of pre-heating composite resin, which has experienced great improvement in some of their physical properties, this study aimed to evaluate in vitro the superficial and internal marginal adaptation of different materials and sealants in pre-heating or not. A total of 40 extracted human third molars (n=10) that had their occlusal surfaces prepared to receive sealant. We tested two types of sealing materials: resin sealant (Fluoroshield) and low-viscosity resin (Permaflo), where 50% of previously received heated material and the other half received sealant material at room temperature. All samples were subjected to thermal cycling and pH, simulating a cariogenic oral environment, and later were analyzed appliance OCT (optical coherence tomography). The images obtained alterations were recorded and analyzed statistically. Change was considered as the emergence of bubbles, gaps and cracks in the sealant. Comparisons of the same material, assessing the fact that it is not sealed or preheated material, as well as comparisons between different materials subjected to the same temperature were carried out. The nonparametric Tukey test was used (p < 0,05). The results showed that there was statistically significant difference between both the materials analyzed, as between the situations in which the sealant material was submitted (preheated or not). On the issue of marginal adaptation and internal surface, seen through Optical coherence tomography, may suggest that there is a difference between the use of one type or another of the sealing material analyzed, with superiority attributed to resin Permaflo compared to sealant Fluroshield, telling is the same for the different techniques used