Controle on-line do número de não-conformidades por itens em uma produção finita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Controle on-line por atributos para o número de não-conformidades no item inspecionado com base em uma sequência de inspeção

This paper proposes a procedure to control on-line processes for attributes, using an Shewhart control chart with two control limits (warning limit and control limit) and will be based on a sequence of inspection (h). The inspection procedure is based on Taguchi et al. (1989), in which to inspect the item, if the number of non-conformities is higher than an upper control limit, the process needs to be stopped and some adjustment is required; and, if the last inspection h, from all items inspected present a number of non-conformities between the control limit and warning limit. The items inspected will suffer destructive inspection, being discarded after inspection. Properties of an ergodic Markov chain are used to get the expression of average cost per item and the aim was the determination of four optimized parameters: the sampling interval of the inspections (m); the constant W to draw the warning limit (W); the constant C to draw the control limit (C), where W £ C, and the length of sequence of inspections (h). Numerical examples illustrate the proposed procedure

Controle de estoques de sal: uma inovação da quantificação e no gerenciamento dos recursos naturais da indústria mineral

The strengthening of the domestic industry in Brazil required the modernization, mechanization and expansion of salt production. Thereafter the production of sea salt started to be made in a process of continuous flow, where the product is constantly stored in yards, with daily movements in and out of salt. Thus far, the major bottleneck found in this production process is the control of production, because due to the large amount produced and variety of losses existing in the various stages of production there are not a regulated and safe way to control inventories with accuracy and speed demanded. In a typical case with a salt marsh company of Rio Grande do Norte state, salt produced is stored in two open courtyards and inventory control of salt made by carrying input / output relationship of salt in each storage yard. This work developed a conceptual model of inventory control, based on topography, adopting surveys into one of the courtyards of the company. There were 25 biweekly survey measurements over a year book to generate digital models representing the stock. For each measurement, results were compared with the values of inventory accounting provided by the salt marsh in order to identify existing losses and mark out the sales department on the actual stock available at each measurement date. Inventories calculated by the model indicated losses of 6,349 tonnes for the period of one year book and 3,279 tonnes for the period between harvests, when compared to the accounting control

A gestão da qualidade nos cursos de graduação a distância da UFRN/SEDIS : a percepção dos discentes

This dissertation has as objective at analyzing the students' perception about the quality of graduate courses distance of the Federal University of Rio Grande do Norte, which was motivated by the following research problem: the perception that graduate students of the distance of the UFRN have on the quality of the undergraduate? To this end, we sought to gather evidence for a satisfactory approach that addresses the complexity of the subject studied: quality management, distance learning and quality in the Higher Education Institutions. We chose to adopt as a research method, case study on the procedure of the research, exploratory research-descriptive about the objective and quantitative research when tackling the problem. The object of the study were six graduate courses distance UFRN/SEDIS, having as target the students of the courses. The sample was calculated using the Stratified sampling on which 217 students, the courses surveyed were selected. The survey instrument consisted of 21 structured questions, of which seven questions designed to identify the profile of students, seven issues of perceptions (manifest variables) on quality management in distance learning, where students have given values (responses) for 24 statements (which address the central theme of this dissertation) composite based on a 5-point Likert s scale, and six questions about general characteristics that may interfere with students' perception about the quality. Was used as statistical method (data analysis), descriptive statistics and exploratory factor analysis. The results show the identification of four latent factors (obtained by exploratory factor analysis), namely: (1) infrastructure and management - polo presence, (2) teaching-learning processes, (3) communication tools and integration; (4) tutors. We also observed that aspects related to infrastructure and management at the pole face had the lowest score among the factors observed, requiring special attention by the education institution. On the other hand, teachers and teaching learning processes were the items with better performance in the perception of students. It is concluded that the perception of students in relation to quality in distance education courses, the median is trending positive perception, ie the perception of overall quality of the courses is not assertive and unison, but tends to positive perception. Thus, the results, it is expected that the managers of the institution to focus attention on critical points in order to minimize them (or eliminate them) and maximize the positive aspects that are perceived by the students

Avaliação da importância dos sistemas de gestão da qualidade nas universidades federais

This thesis aims at analyzing from the perspective of the manager the importance of the use of quality management tools and concepts in Federal Universities. It was motivated by the following research problem: do Federal University managers consider it to be relevant the quality management in their institution? Therefore, we sought to gather evidence for a satisfactory approach that addresses the complexity of the topic researched: quality, higher education and quality management systems. We chose to adopt an applied study, the exploratory-descriptive research as to the objective and the quantitative and qualitative research as to the approach to the problem. The object of study is composed by the Planning Provosts of Federal Universities listed in the University Ranking Sheet - (RUF) in 2013. We chose to restrict the sample listing only the provosts of the 20 best-placed universities in the ranking of the Federal Universities. The research instrument was composed of 26 questions, of which 6 questions were designed to identify the profile of the manager, 16 questions of perception (manifested variables) on the importance of quality management in the University, where the managers assigned values (answers) to the affirmatives (that address the main topic of this thesis) based on a Likert scale of 5 points, and 4 open and optional questions, in order to identify general management practices used. It was used for statistical analysis (data analysis) descriptive and factorial statistics. The responses collected through the questionnaire portray the managers´ perception regarding the importance of quality management in their institutions. Sixteen variables were addressed, the results of factor analysis of importance were "Important" and "Very Important", where the variable (V2) was "Important" and all others "Very important." With this information, it is possible to prioritize some areas that deserve immediate action. As it was observed that some variables are "Very important" for the vast majority of managers, others did not show the same result as example (V2, V10, V11). It is concluded that the manager´s perception of quality management in his or her institution is relevant, but the same importance is not given to quality programs implemented in other segments of the economy, and that, despite the advancements offered by SINAES, the model does not evaluate the institution in a global way. Thus, with the results, it is expected to contribute to the advancement of the subject, trying to arouse interest from the managers of Federal Universities in the subject, emphasizing the importance of quality management systems as a necessary tool to raise the institutional quality

Avaliação do impacto do plano de expansão da rede federal na qualidade dos institutos federais de educação segundo indicadores de desempenho

The Expansion Plan of the Federal Network of Vocational Education foresees the construction of 860 new units of instruction until 2020, representing a strong growth against the 140 existing units prior to its disclosure by Federal Government of Brazil, in 2005. The Federal Institutes of Education, Science and Technology have been performing the expansion while experiencing the shortcomings and challenges of units still in development, created in previous phases of the Plan. The quality of the services of these institutions has been evaluated by the control bodies, which require the submission of performance indicators in annual management reports of institutions under their jurisdiction. In this context of expansion process, particularly, is desirable to identify possible changes in quality standards. Thus, this research was motivated by the following problem: there was difference in the performance of the Federal Institutes of Education, Science and Technology after the inauguration of the first units of phase II of the Expansion Plan of the Federal Network of Vocational Education? This is an exploratory-descriptive, ex-post-facto, quantitative approach research, which aims to contribute to the knowledge of the impact of the expansion of the Federal Network. The data were collected from 12 indicators presented in management reports of 38 Federal Institutes through years 2007 to 2011 to evaluate the performances using descriptive statistical techniques. The indicators were analyzed in both consolidated and open manners by the following perspectives: country region, growth of instruction units and institutions origin. Was also performed a multivariate analysis of clusters in order to identify excellence groups of Institutes. The results showed differences in the expansion plan s development among Brazilian regions, both in terms of infrastructure and academic indicators, with better results in the Midwest and South, and that there are differentiated profiles of institutes as its origin, where the best quality indicators occur in those originated by integration of different educational institutions. Still, were identified two excellence groups, with emphasis on academic management, human resources and expansion

Qualidade em serviços de saúde: uma contribuição à definição de um modelo paramétrico e padrão de qualidade do tempo agendado para consulta ambulatorial

This work presents a study in quality of health care, with focus on consulting appointment. The main purpose is to define a statistical model and propose a quality grade of the consulting appointment time. The time considered is that from the day the patient get the appointment done to the day the consulting is realized. It is used reliability techniques and functions that has as main characteristic the analysis of data regarding the time of occurrence certain event. It is gathered a random sample of 1743 patients in the appointment system of a University Hospital - the Hospital Universitário Onofre Lopes - of the Federal University of Rio Grande do Norte, Brazil. The sample is randomly stratified in terms on clinical specialty. The data were analyzed against the parametric methods of the reliability statistics and the adjustment of the regression model resulted in the Weibull distribution being best fit to data. The quality grade proposed is based in the PAHO criteria for a consulting appointment and result that no clinic got the PAHO quality grade. The quality grade proposed could be used to define priority for improvement and as criteria to quality control

Cultura organizacional orientada à qualidade: um survey nas concessionárias automotivas brasileiras certificadas com a ISO 9001

The study aims identify the existence of quality culture in Brazilian automotive dealerships with ISO 9001, motivated by this research problem: exist a quality culture in this dealerships, which facilitates the adoption of quality practices supported by ISO 9001? For referencing, the theoretical review was written in five themes: organizational culture, quality culture, total quality management, ISO 9001 quality management system and the Brazilian automobile industry. As regards the methodological aspects, the research has an applied nature, with a quantitative approach, being exploratory in their objectives, and bibliographic, documental and survey as technical procedures. The organizations participating in the study were all Brazilian automotive dealerships certified with ISO 9001. The research intended cover all the 80 active dealers with ISO 9001 certification identified by the Brazilian Committee for Quality (ABNT CB-25). The survey recorded participation of 32 companies (response rate 40%). The questionnaire was sent to seller managers, formatted into five sections: 1) introductory message 2) manager profile, 3) reasons for implementation and benefits generated by ISO 4) adoption levels of quality practices and 5) diagnosis of organizational culture. The questions contained in sections 2 and 3 were structured in multiple choice, and in the remaining sections were structured in Likert 5-point scale. The statistical method used (data analysis), was the descriptive statistics, for data representation in frequency percentage (FP) and standard level (SL). The results showed that the interviewed dealerships have an organizational culture with very high levels of prevalence in "outcome orientation" and "attention to detail" cultural dimensions. In addition, about the other two dimensions considered conducive to quality (innovation and teamwork/respect for people), both observed high prevalence. Based on the present results, concluded that the organizational culture of Brazilian dealerships with ISO 9001 are quality oriented, being conducive to adoption of quality practices supported by TQM Systems. However, it is important to mention that the quality culture identified is not sufficiently developed to adopt quality practices at optimal levels, which sets up an unfavorable scenario to deals with highly rigorous customer

Implementação de um sistema embarcado aplicado ao controle de pressão arterial

Hypertension is a dangerous disease that can cause serious harm to a patient health. In some situations the necessity to control this pressure is even greater, as in surgical procedures and post-surgical patients. To decrease the chances of a complication, it is necessary to reduce blood pressure as soon as possible. Continuous infusion of vasodilators drugs, such as sodium nitroprusside (SNP), rapidly decreased blood pressure in most patients, avoiding major problems. Maintaining the desired blood pressure requires constant monitoring of arterial blood pressure and frequently adjusting the drug infusion rate. Manual control of arterial blood pressure by clinical personnel is very demanding, time consuming and, as a result, sometimes of poor quality. Thus, the aim of this work is the design and implementation of a database of tuned controllers based on patients models, in order to find a suitable PID to be embedded in a Programmable Integrated Circuit (PIC), which has a smaller cost, smaller size and lower power consumption. For best results in controlling the blood pressure and choosing the adequate controller, tuning algorithms, system identification techniques and Smith predictor are used. This work also introduces a monitoring system to assist in detecting anomalies and optimize the process of patient care.

Controle inteligente de pressão para uma rede sem reservatório de abastecimento urbano de água

The sanitation companies from Brazil has a great challenge for the XXI century: seek to mitigate the rate of physical waste (water, chemicals and electricity) and financial waste caused by inefficient operating systems drinking water supply, considering that currently we already face, in some cases, the scarcity of water resources. The supply systems are increasingly complex as they seek to minimize waste and at the same time better serve the growing number of users. However, this technological change is to reduce the complexity of the challenges posed by the need to include users with higher quality and efficiency in services. A major challenge for companies of water supplies is to provide a good quality service contemplating reducing expenditure on electricity. In this situation we developed a research by a method that seeks to control the pressure of the distribution systems that do not have the tank in your setup and the water comes out of the well directly to the distribution system. The method of pressure control (intelligent control) uses fuzzy logic to eliminate the waste of electricity and the leaks from the production of pumps that inject directly into the distribution system, which causes waste of energy when the consumption of households is reduced causing the saturation of the distribution system. This study was conducted at Green Club II condominium, located in the city of Parnamirim, state of Rio Grande do Norte, in order to study the pressure behavior of the output of the pump that injects water directly into the distribution system. The study was only possible because of the need we had to find a solution to some leaks in the existing distribution system and the extensions of the respective condominium residences, which sparked interest in developing a job in order to carry out the experiments contained in this research

Modelagem e controle adaptativo de uma planta didática de nível com instrumentação industrial

The control, automation and optimization areas help to improve the processes used by industry. They contribute to a fast production line, improving the products quality and reducing the manufacturing costs. Didatic plants are good tools for research in these areas, providing a direct contact with some industrial equipaments. Given these capabilities, the main goal of this work is to model and control a didactic plant, which is a level and flow process control system with an industrial instrumentation. With a model it is possible to build a simulator for the plant that allows studies about its behaviour, without any of the real processes operational costs, like experiments with controllers. They can be tested several times before its application in a real process. Among the several types of controllers, it was used adaptive controllers, mainly the Direct Self-Tuning Regulators (DSTR) with Integral Action and the Gain Scheduling (GS). The DSTR was based on Pole-Placement design and use the Recursive Least Square to calculate the controller parameters. The characteristics of an adaptive system was very worth to guarantee a good performance when the controller was applied to the plant

Estratégia de controle robusto para interconexão de sistemas PV trifásicos à rede elétrica

Atualmente há uma grande preocupação em relação a substituição das fontes não renováveis pelas fontes renováveis na geração de energia elétrica. Isto ocorre devido a limitação do modelo tradicional e da crescente demanda. Com o desenvolvimento dos conversores de potência e a eficácia dos esquemas de controle, as fontes renováveis têm sido interligadas na rede elétrica, em um modelo de geração distribuída. Neste sentido, este trabalho apresenta uma estratégia de controle não convencional, com a utilização de um controlador robusto, para a interconexão de sistemas fotovoltaicos com à rede elétrica trifásica. A compensação da qualidade de energia no ponto de acoplamento comum (PAC) é realizada pela estratégia proposta. As técnicas tradicionais utilizam detecção de harmônicos, já neste trabalho o controle das correntes é feita de uma forma indireta sem a necessidade desta detecção. Na estratégia indireta é de grande importância que o controle da tensão do barramento CC seja efetuado de uma forma que não haja grandes flutuações, e que a banda passante do controlador em regime permanente seja baixa para que as correntes da rede não tenham um alto THD. Por este motivo é utilizado um controlador em modo dual DSM-PI, que durante o transitório se comporta como um controlador em modo deslizante SM-PI, e em regime se comporta como um PI convencional. A corrente é alinhada ao ângulo de fase do vetor tensão da rede elétrica, obtido a partir do uso de um PLL. Esta aproximação permite regular o fluxo de potência ativa, juntamente com a compensação dos harmônicos e também promover a correção do fator de potência no ponto de acoplamento comum. Para o controle das correntes é usado um controlador dupla sequencia, que utiliza o princípio do modelo interno. Resultados de simulação são apresentados para demonstrar a eficácia do sistema de controle proposto

A influência da adição de caulim, quartzo e feldspato potássico na formulação de massas cerâmicas para telhas: Modelo estatístico

The production of roof tiles in the state of Rio Grande do Norte accounts for around 60% of the total of ceramic pieces produced. There is a need for investment to improve quality and productivity, thereby promoting technological innovations. Accordingly, the aim of this study is to determine the effect of kaolin, potassium feldspar and quartz in two standard formulations, as well as the effect of sintering temperature on the technological properties of linear firing shrinkage, water absorption and bending rupture stress, by fitting the statistical model and using multiple linear regression to assess the relationship between technological properties and independent variables. The raw materials were characterized using the following techniques: X-ray fluorescence (XRF), X-ray diffraction (XRF), rational analysis (RA), differential thermal analysis (DTA) and granulometric analysis (GA). The test specimens were compacted by uniaxial pressure (25 MPa), dried in a stove at 110 ºC for 24 hours and sinterized at 850 ºC, 950 ºC and 1050 ºC and held isothermal for 30 minutes. The results obtained indicate that the addition of kaolin to two standard formulations (M and R) promoted a reduction in water absorption values and an increase in bending rupture stress values. The sintering temperatures for group M that resulted in the lowest linear firing shrinkage and water absorption values were 850 ºC and 950 ºC, respectively, and the highest bending rupture stress values were reached at a temperature of 950 ºC. In the case of group R, the sintering temperature that obtained the lowest water absorption and linear firing shrinkage values was 850 ºC, and the highest bending rupture stress values were attained at a temperature of 1050 ºC. This work explains the statistical approach used to fit the model that describes the relationship between the technological properties and percentage of kaolin, quartz and feldspar, as well as the models that enable predictions, provided that the lower and upper limits of the percentage of clay minerals, flux and quartz used in this study are respected. Statistica 6 software was used and results were obtained by stepwise forward regression

Comparação entre planejamento estatístico experimental e análise dimensional em operações de mistura e separação para sistema óleo-água

This work aims to determine a better methodology to help predicting some operational parameters to a new design of mixer-settler on treating wastewater produced by petroleum industry, called MDIF (Misturador-Decantador à Inversão de Fases/ Mixer-Settler based on Phase Inversion MSPI). The data from this research were obtained from the wastewater treatment unit, called MSPI-TU, installed on a wastewater treatment plant (WTP) of PETROBRAS/UO-RNCE. The importance in determining the better methodology to predict the results of separation and extraction efficiency of the equipment, contributes significantly to determine the optimum operating variables for the control of the unit. The study was based on a comparison among the experimental efficiency (E) obtained by operating MSPI-TU, the efficiency obtained by experimental design equation (Eplan) from the software Statistica Experimental Design® (version 7.0), and the other obtained from a modeling equation based on a dimensional analysis (Ecalc). The results shows that the experimental design equation gives a good prediction of the unit efficiencies with better data reliability, regarding to the condition before a run operation. The average deviation between the proposed by statistic planning model equation and experimental data was 0.13%. On the other hand, the efficiency calculated by the equation which represents the dimensional analysis, may result on important relative deviations (up 70%). Thus, the experimental design is confirmed as a reliable tool, with regard the experimental data processing of the MSPI-TU

Avaliação da Qualidade da Água do rio Pitimbu

The Pitimbu River Basin is concern reason, therefore this is one of the mains freshwater sources for the Natal city supplying. The Pitimbu waters river flow into Jiqui pond, as the main supplier of this, that supplies 16% of Natal population and there is a bigger importance despite the supplying of a parcel of Natal city made joining underground waters with the water proceeding from the Jiqui pond, being used for dilution waters of contaminated wells with nitrate. Even with the importance of the Pitimbu, there is a strong pressure of occupation of its edge according to a critical urban growth, becoming the situation worse and increasing the necessity of management of the use and occupation of the ground and keeping the control of the prompt pollution, as punctual as diffuse. There are many studies about Pitimbu River Basin, however they summarize themselves to some months or even in a few years. This work, that gathers these information, increasing the amplitude and making possible an evaluation of the attitude of the water in a period extended for an evaluation of values of variable quality of water referring to the standards, that usually happens about the variable frequency distribution, central tendency and measures of dispersion, as the coefficient of variation, coefficient of skewness and the coefficient of determination of certain variable on another one. This work to evaluates the quality conditions of the Pitimbu river waters by analyzing thirty five (35) variables Physical, chemical and biological in eight (8) points of water course since 1993 to 2007. Given this situation, all knowledge about the waters quality conditions obtained in this work, is a strong subsidy for management of use and ground occupation, considering the river basin as territorial unit of management, and as the water is public good domain, being a priority human use, It is necessary to guarantee to current and the future generations available water resources in appropriate standards of quality as the established standard and identifying possible reasons of pollution through statistics analysis