Análise da trajetória de poços horizontais em reservatório de óleo pesado

The application of thermal methods, to increase the recovery of heavy oil in mature fields through drainage with multilateral and horizontal wells, has been thoroughly studied, theorically, experimentally, testing new tools and methods. The continuous injection of steam, through a steam injector well and a horizontal producer well in order to improve horizontal sweep of the fluid reservoir, it is an efficient method. Starting from an heterogeneous model, geologically characterized, modeling geostatistics, set history and identification of the best path of permeability, with seismic 3D, has been dubbed a studying model. It was studied horizontal wells in various directions in relation to the steam and the channel of higher permeability, in eight different depths. Into in the same area were studied, the sensitivity of the trajectories of horizontal wells, according to the depth of navigation. With the purpose of obtaining the highest output of oil to a particular flow, quality, temperature and time for the injection of steam. The wells studied showed a significant improvement in the cumulative oil recovery in one of the paths by promoting an alternative to application in mature fields or under development fields with heavy oil

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Metodologia de utilização de dados de sensoriamento remoto em zonas costeiras sob influência da indústria petrolífera

Oil spills in marine environments represent immediate environmental impacts of large magnitude. For that reason the Environmental Sensitivity to Oil Maps constitute a major instrument for planning actions of containment and cleanup. For both the Environmental Sensitivity Maps always need to be updated, to have an appropriate scale and to represent accurately the coastal areas. In this context, this thesis presents a methodology for collecting and processing remote sensing data for the purpose of updating the territorial basis of thematic maps of Environmental Sensitivity to Oil. To ensure greater applicability of the methodology, sensors with complementary characteristics, which provide their data at a low financial cost, were selected and tested. To test the methodology, an area located on the northern coast of the Northeast of Brazil was chosen. The results showed that the products of ASTER data and image hybrid sensor PALSAR + CCD and HRC + CCD, have a great potential to be used as a source of cartographic information on projects that seek to update the Environmental Sensitivity Maps of Oil

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Estudo do processo de drenagem gravitacional do óleo assistido com injeção de vapor e solvente

Como os recursos de hidrocarbonetos convencionais estão se esgotando, a crescente demanda mundial por energia impulsiona a indústria do petróleo para desenvolver mais reservatórios não convencionais. Os recursos mundiais de betume e óleo pesado são estimados em 5,6 trilhões de barris, dos quais 80% estão localizados na Venezuela, Canadá e EUA. Um dos métodos para explorar estes hidrocarbonetos é o processo de drenagem gravitacional assistido com injeção de vapor e solvente (ES-SAGD Expanding Solvent Steam Assisted Gravity Drainage). Neste processo são utilizados dois poços horizontais paralelos e situados verticalmente um acima do outro, um produtor na base do reservatório e um injetor de vapor e solvente no topo do reservatório. Este processo é composto por um método térmico (injeção de vapor) e um método miscível (injeção de solvente) com a finalidade de causar a redução das tensões interfaciais e da viscosidade do óleo ou betume. O objetivo deste estudo é analisar a sensibilidade de alguns parâmetros operacionais, tais como: tipo de solvente injetado, qualidade do vapor, distância vertical entre os poços, porcentagem de solvente injetado e vazão de injeção de vapor sobre o fator de recuperação para 5, 10 e 15 anos. Os estudos foram realizados através de simulações concretizadas no módulo STARS (Steam Thermal, and Advanced Processes Reservoir Simulator) do programa da CMG (Computer Modelling Group), versão 2010.10, onde as interações entre os parâmetros operacionais, estudados em um modelo homogêneo com características de reservatórios semelhantes aos encontrados no Nordeste Brasileiro, foram observadas. Os resultados obtidos neste estudo mostraram que os melhores fatores de recuperação ocorreram para níveis máximos do percentual de solvente injetado e da distância vertical entre os poços. Observou-se também que o processo será rentável dependendo do tipo e do valor do solvente injetado

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves

Desenvolvimento de uma unidade pirolítica com reator de cilindro rotativo: obtenção de bio-óleo

The demand for alternative sources of energy drives the technological development so that many fuels and energy conversion processes before judged as inadequate or even non-viable, are now competing fuels and so-called traditional processes. Thus, biomass plays an important role and is considered one of the sources of renewable energy most important of our planet. Biomass accounts for 29.2% of all renewable energy sources. The share of biomass energy from Brazil in the OIE is 13.6%, well above the world average of participation. Various types of pyrolysis processes have been studied in recent years, highlighting the process of fast pyrolysis of biomass to obtain bio-oil. The continuous fast pyrolysis, the most investigated and improved are the fluidized bed and ablative, but is being studied and developed other types in order to obtain Bio-oil a better quality, higher productivity, lower energy consumption, increased stability and process reliability and lower production cost. The stability of the product bio-oil is fundamental to designing consumer devices such as burners, engines and turbines. This study was motivated to produce Bio-oil, through the conversion of plant biomass or the use of its industrial and agricultural waste, presenting an alternative proposal for thermochemical pyrolysis process, taking advantage of particle dynamics in the rotating bed that favors the right gas-solid contact and heat transfer and mass. The pyrolyser designed to operate in a continuous process, a feeder containing two stages, a divisive system of biomass integrated with a tab of coal fines and a system of condensing steam pyrolytic. The prototype has been tested with sawdust, using a complete experimental design on two levels to investigate the sensitivity of factors: the process temperature, gas flow drag and spin speed compared to the mass yield of bio-oil. The best result was obtained in the condition of 570 oC, 25 Hz and 200 cm3/min, temperature being the parameter of greatest significance. The mass balance of the elementary stages presented in the order of 20% and 37% liquid pyrolytic carbon. We determined the properties of liquid and solid products of pyrolysis as density, viscosity, pH, PCI, and the composition characterized by chemical analysis, revealing the composition and properties of a Bio-oil.

Monitoramento da morfologia costeira em setores da bacia potiguar sob influência da indústria petrolífera utilizando geodésia de alta precisão e laser escâner terrestre

The objective of this Doctoral Thesis was monitoring, in trimestral scale, the coastal morphology of the Northeastern coast sections of Rio Grande do Norte State, in Brazil, which is an area of Potiguar Basin influenced by the oil industry activities. The studied sections compose coastal areas with intense sedimentary erosion and high environmental sensitivity to the oil spill. In order to achieve the general objective of this study, the work has been systematized in four steps. The first one refers to the evaluation of the geomorphological data acquisition methodologies used on Digital Elevation Model (DEM) of sandy beaches. The data has been obtained from Soledade beach, located on the Northeastern coast of Rio Grande Norte. The second step has been centered on the increasing of the reference geodetic infrastructure to accomplish the geodetic survey of the studied area by implanting a station in Corta Cachorro Barrier Island and by conducting monitoring geodetic surveys to understand the beach system based on the Coastline (CL) and on DEM multitemporal analysis. The third phase has been related to the usage of the methodology developed by Santos; Amaro (2011) and Santos et al. (2012) for the surveying, processing, representation, integration and analysis of Coastlines from sandy coast, which have been obtained through geodetic techniques of positioning, morphological change analysis and sediment transport. The fourth stage represents the innovation of surveys in coastal environment by using the Terrestrial Laser Scanning (TLS), based on Light Detection and Ranging (LiDAR), to evaluate a highly eroded section on Soledade beach where the oil industry structures are located. The evaluation has been achieved through high-precision DEM and accuracy during the modeling of the coast morphology changes. The result analysis of the integrated study about the spatial and temporal interrelations of the intense coastal processes in areas of building cycles and destruction of beaches has allowed identifying the causes and consequences of the intense coastal erosion in exposed beach sections and in barrier islands

Análise da Expressão de APE1 após Estresse Oxidativo Induzido em Células Proficientes e Deficientes na Via de Reparo por Excisão de Nucleotídeos

Riboflavin is a vitamin very important in aerobic organisms, as a precursor of many coenzymes involved in the electron transporter chain. However, after photosensitization of riboflavin with UV or visible light, it generates reactive oxygen species (ROS), which can oxidize the DNA. The repair of oxidative lesions on DNA occurs through the base excision repair pathway (BER), where APE1 endonuclease plays a central role. On the other hand, the nucleotide excision repair pathway (NER) repairs helix-distorting lesions. Recently, it was described the participation of NERproteins in the repair of oxidative damage and in stimulation of repair function fromAPE1. The aim of this research was to evaluate the cytotoxic effects of photosensitized riboflavin (RF*) in cells proficient and deficient in NER, correlating with APE1 expression. For this propose, the cells were treated with RF* and it was performed the cell viability assay, extraction of whole proteins, cells fractionation, immunoblotting, indirect immunofluorescence and analysis of polymorphisms of BER gens. The results evidenced that cells deficient in XPA and CSB proteins were more sensitive to RF*. However, XPC-deficient cells presented similar resistance to MRC5- SV cells, which is proficient in NER. These results indicate that XPA and CSB proteins have an important role on repair of oxidative lesions induced by RF*. Additionally, it was evidenced that single nucleotide polymorphisms (SNPs) in BER enzymes may influence in sensitivity of NER-deficient cell lines. Concerning the APE1 expression, the results showed that expression of this protein after treatment with RF* only changed in XPC-deficient cells. Though, it was observed that APE1 is recruited and is bound to chromatin in MRC5-SV and XPA cells after treatment with RF*. The results also showed the induction of DNA damage after treatment with RF*, through the analysis of-H2AX, since the treatment promoted an increase of endogenous levels of this phosphorylated protein, which acts signaling double strand-break on DNA. On the other hand, in XPC-deficient cells, regardless of resistance of RF*, the endogenous levels of APE1 are extremely reduced when compared with other cell lines and APE1 is not bound to chromatin after treatment with RF*. These results conclude that RF* was able to induce cell death in NERdeficient cells, where XPA and CSB cells were more sensitive when compared with MRC5-SV and XPC-deficient cells. This last result is potentially very interesting, since XPC-deficient cell line presents low levels of APE1. Additionally, the results evidenced that APE1 protein can be involved in the repair of oxidative damage induced by RF*, because APE1 is recruited and bound strongly to chromatin after treatment.

Proteômica comparativa de linhagens celulares humanas expostas a estresse oxidativo induzido por riboflavina fotossensibilizada

Reactive oxygen species (ROS) are continuously generated and can be derived from cellular metabolism or induced by exogenous factors, in addition, have the capacity to damage molecules like DNA and proteins. BER is considered the main route of DNA damage oxidative repair, however, several studies have demonstrated the importance of the proteins participation of other ways to correct these injuries. NER enzymes deficiency, such as CSB and XPC, acting in the damage recognition step in the two subways this system influences the effectiveness of oxidative damage repair. However, the mechanisms by which cells deficient in these enzymes respond to oxidative stress and its consequences still need to be better understood. Thus, the aim of this study was to perform a proteomic analysis of cell lines proficient and deficient in NER, exposed to oxidative stress, in order to identify proteins involved, directly or not, in response to oxidative stress and DNA repair. For this, three strains of human fibroblasts, MRC5-SV, CS1AN (CSBdeficient) and XP4PA (XPC-deficient) were treated with photosensitized riboflavin and then carried out the differentially expressed proteins identification by mass spectrometry. From the results, it was observed in MRC5-SV increase expression in most of the proteins involved in cellular defense, an expected response to a normal cell line subjected to stress. CS1AN showed a response disjointed, it is not possible to establish many interactions between the proteins identified, may be one explanation for their sensitivity to treatment with riboflavin and other oxidants and increased cell death probably by induction of pro-apoptotic pathways. Already XP4PA showed higher expression of apoptosis-blocking proteins, as there was inhibition or reduced expression of others involved with the activation of this process, suggesting the activation of an anti-apoptotic mechanism in this lineage, which may help explain the high susceptibility to develop cancers in XPC individuals. These results also contribute to elucidate action mechanisms of NER in oxidative damage and the understanding of important routes in the oxidative stress correlation, repair and malignant tumors formation

Efetividade do clareamento dentário com peróxido de carbamida a 10% e avaliação dos efeitos adversos sobre o esmalte dentário

The aim of the present study was to assess the effectiveness and adverse effects on dental enamel caused by nightguard vital bleaching with 10% carbamide peroxide. This was accomplished through the interaction of researchers from different areas such as dentistry, materials engineering and physics. Fifty volunteers took part in the doubleblind randomized controlled clinical trial. They were allocated to an experimental group that used Opalescence PF 10% (OPA) and a control group that used a placebo gel (PLA). Fragments of human dental enamel from the vestibular surface of healthy premolars, extracted for orthodontic reasons, were fixed to the vestibular surface of the first upper molars of the volunteers for in situ observation. Bleaching was performed at night for 21 days. The observation periods included Baseline (BL), T0 (21 days), T30 (30 days after treatment) and T180 (180 days after treatment, only for the OPA group). Tooth color was assessed by comparing it with the Vita® scale and by the degree of satisfaction expressed by the volunteer. We also assessed adverse clinical effects, dental sensitivity and gingival bleeding. The study of adverse effects on enamel was conducted in vivo and in situ, using the DIAGNOdent® laser fluorescence device to detect mineral loss. Scanning electron microscopy (SEM) was used to check for superficial morphological alterations, energy dispersive spectrophotometry (EDS) to semiquantitatively assess chemical composition using the Ca/P ratio, and the x-ray diffraction (XRD) technique to observe alterations in enamel microstructure. The results showed that nightguard vital bleaching with 10% carbamide peroxide was effective in 96% of the cases, versus 8% for the PLA group. Dental sensitivity was present in 36% (9/25) of the cases. There was no significant association between gingival bleeding and the type of gel used (p = 1.00). In vivo laser fluorescence analysis showed no difference in values for the control group, whereas in the OPA group there was a statistically significant difference between baseline values in relation to the subsequent periods (p<0.01), with lower mean values for post-bleaching times. There was a significant difference between the groups for times T0 and T30. Micrographic analysis showed no enamel surface alterations related to the treatment performed. No significant alteration in Ca/P ratio was observed in the OPA group (p = 0.624) or in the PLA group (p = 0.462) for each of the observation periods, nor between the groups studied (p=0.102). The XRD pattern for both groups showed the presence of three-phase Hydroxyapatite according to JCPDS files (9-0432[Ca5(PO4)3(OH)], 18-0303[Ca3(PO4)2.xH2O] and 25-0166[Ca5(PO4)3(OH, Cl, F)]). No other peak associated to other phases was found, independent of the group analyzed, which reveals there was no disappearance, nucleation or phase transformation. Neither was there any alteration in peak pattern location. With the methodology and protocol used in this study, nightguard vital bleaching with 10% carbamide peroxide proved to be an effective and safe procedure for dental enamel

Estudo cinético na caracterização do status corporal de zinco na Síndrome de Berardinelli-Seip

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Acurácia dos índices antropométricos de obesidade central na determinação de síndrome metabólica e fatores de risco cardiovascular em mulheres com síndrome dos ovários policísticos

A síndrome dos ovários policísticos (SOP) é a desordem endócrina mais comum em mulheres com idade reprodutiva. Seu diagnóstico é firmado através do consenso de Rotterdam na presença de dois dos seguintes critérios: anovulação crônica, sinais clínicos e/ou bioquímicos de hiperandrogenismo e presença de micropolicistos nos ovários. Na SOP, além das características específicas da síndrome é comum a presença de marcadores de risco cardiovascular aumentado como dislipidemia, hipertensão arterial, resistência à insulina e obesidade central Objetivos: Analisar a acurácia diagnóstica da circunferência da cintura (CC), relação cintura-estatura (RCEst), razão cintura-quadril (RCQ) e índice de conicidade (Índice C) para detecção de fatores de risco cardiovascular (FRCV) e síndrome metabólica (SM) em mulheres com síndrome dos ovários policísticos (SOP). Metodologia: Foi realizado estudo transversal envolvendo 108 mulheres na faixa etária de 20-34 anos, com diagnóstico de SOP de acordo com o consenso de Rotterdam. Foram considerados parâmetros clínicos, antropométricos e bioquímicos de avaliação do risco cardiovascular. A análise dos dados foi desenvolvida em duas etapas, conforme descrito a seguir. Fase 1: análise da acurácia dos pontos de corte previamente determinados na literatura nacional para CC, RCEst, RCQ e Índice C, para predição de FRCV; Fase 2: determinação de pontos de corte dos índices antropométricos supracitados, específicos para mulheres com SOP, para discriminação de SM, através da análise da curva ROC (Receiver Operating Characteristic). Resultados: Com base nos achados da fase 1 do estudo, a RCEst foi o marcador que apresentou correlações positivas significativas com o xi maior número de FRCV (pressão arterial, triglicerídeos e glicemia após teste oral de tolerância à glicose), além de correlação negativa com HDL-colesterol. Os demais marcadores antropométricos se correlacionaram positivamente com pressão arterial, enquanto CC e RCQ apresentaram correlação positiva também com triglicerídeos. Todos os indicadores antropométricos apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEst que apresentou sensibilidade superior a 70%. Na fase 2 da pesquisa observamos que a CC, RCEst e RCQ apresentaram desempenho semelhante na predição de SM, sendo superiores ao Índice C. Os valores de ponto de corte dos índices antropométricos para discriminar SM foram: CC = 95 cm; RCEst = 0,59; RCQ = 0,88; e Índice C = 1,25. Utilizando esses pontos de corte as taxas de sensibilidade e especificidade da CC e RCEst foram superiores às observadas para RCQ e Índice C. Conclusões: Nossos dados enfatizam a importância da avaliação antropométrica no rastreamento do risco cardiovascular em mulheres com SOP, destacando-se a relevância da RCEst na predição de FRCV clássicos e a necessidade de considerar pontos de corte específicos para mulheres com SOP para discriminação de SM

Análise da variabilidade da frequência cardíaca na síndrome dos ovários policísticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Estado nutricional antropométrico, composição corporal e pressão arterial em adolescentes

Os objetivos deste trabalho foram: (1) estimar as prevalências de excesso de peso e de gordura corporal, obesidade central e pressão arterial elevada (PAE) em adolescentes beneficiários do Programa Nacional de Alimentação Escolar (PNAE) da rede municipal de ensino de Natal-RN; (2) verificar a associação entre variáveis antropométricas e de composição corporal com a pressão arterial, a maturação sexual e a história familiar positiva de fatores de risco para doença cardiovascular (FRDCV); (3) comparar dois padrões de referência para classificação do excesso de peso em adolescentes; e (4) propor equações preditivas de massa gorda (MG) e massa livre de gordura (MLG) baseadas nos perímetros corporais. Trata-se de um estudo transversal, com 526 adolescentes beneficiários do PNAE, em Natal, Brasil. O tamanho da população de estudo foi definido por amostragem aleatória, em dois estágios, e ponderada segundo número de alunos de cada escola. No primeiro estudo, o excesso de peso foi determinado por Índice de Massa Corporal (IMC), a gordura corporal estimada por dobras cutâneas e a obesidade central por perímetro abdominal. A pressão arterial elevada foi classificada conforme a American Academy of Pediatrics. As prevalências foram apresentadas em valores relativos e efeito do desenho. Realizou-se uma análise fatorial para sintetizar o conjunto de variáveis antropométricas visando identificar fatores comuns. Extraíram-se dois fatores: (1) padrão excesso de adiposidade e (2) padrão adiposidade central elevada. Para avaliar a associação entre os padrões de adiposidade corporal com pressão arterial elevada, faixa etária, maturação sexual e história familiar de FRDCV utilizou-se a Razão de Chances e respectivo intervalo de confiança de 95% e regressão logística. No segundo estudo, calculou-se a sensibilidade e a especificidade do excesso de peso classificado segundo o IOTF e a World Health Organization WHO em relação ao excesso de adiposidade corporal; e a estatística Kappa para medir a concordância entre os dois padrões de referência. No terceiro estudo, foram elaborados modelos preditivos de MG e MLG com base em nove perímetros corporais, utilizando a bioimpedância Byodinamics 450 como padrão de referência. Para tanto foram selecionados 218 adolescentes eutróficos, segundo o IMC a partir do estudo transversal. As equações foram estimadas por regressão linear múltipla, considerando a idade e os perímetros corporais. Os resultados apontaram que 14,1% dos meninos e 15,7% das meninas tinham excesso de peso; 15,3% dos meninos e 11,6% das meninas tinham excesso de gordura corporal e dentre os meninos 14,3% tinham pressão arterial elevada e as meninas, 21,4%. Todos os efeitos do desenho foram inferiores a 2,5%. Nos meninos, o padrão excesso de adiposidade foi associado à história familiar positiva de FRDCV (ORajust=2,60; 1,09-6,22), maturação sexual (ORajust=2,92; 1,04-8,22) e PAE (ORajust=3,66; 1,34-9,94). Os meninos com 12 anos e mais apresentaram 6,1 vezes mais chance de apresentar padrão adiposidade central elevada do que os adolescentes com 10 a 11 anos (IC95% 2,32-16,04), assim como os púberes apresentaram 3,2 vezes este mesmo padrão em relação aos pré-púberes (IC95%1,14-8,85). A partir da comparação entre os dois padrões de referencia de classificação do excesso de peso por meio do IMC, observou-se que a sensibilidade foi de 79,3% para o critério IOTF e de 88,9% para WHO e a especificidade foi de 94,7% e 89,9%, respectivamente. O nível de concordância foi maior para o critério IOTF (Kappa=0,70 x Kappa=0,64). Em relação à construção das equações preditivas de gordura corporal, do total de 106 meninos e 112 meninas, foram desenvolvidas duas equações para estimar MG e duas para MLG, considerando o sexo. No sexo masculino, a equação para estimar a MG incluiu as variáveis idade, punho, quadril e perímetro abdominal (R2=0,552; AIC=416,04) e MLG, idade, punho e antebraço (R2=0,869; AIC=578,24). Enquanto que no feminino, MG foi estimada pelas variáveis punho, perímetro do abdômen, do quadril, da coxa proximal e da panturrilha (R2=0,838; AIC=415,36); e a MLG por idade, punho, perímetro do abdômen, do quadril e da panturrilha (R2=0,878; AIC=512,48). Conclui-se que os adolescentes tinham elevada prevalência de excesso de adiposidade corporal e de pressão arterial elevada. Tanto o padrão excesso de adiposidade quanto adiposidade central elevada constituem-se em padrões de risco. O padrão excesso de adiposidade foi associado à pressão arterial, história familiar positiva de FRDCV e maturação sexual em meninos. O critério IOTF mostrou-se menos sensível, mais específico, com maior nível de concordância e maior probabilidade de identificar corretamente o excesso de gordura corporal nos adolescentes avaliados. Quatro equações foram desenvolvidas para a estimativa da MG e MLG em adolescentes. As equações desenvolvidas para estimar a MG no sexo feminino e MLG para ambos os sexos apresentaram valores elevados de coeficiente de determinação ajustados e, portanto, são as preferenciais. Este estudo foi realizado com a participação de equipe multidisciplinar composta por professores da área de Nutrição, Endocrinologia Pediátrica, Estatística, Educação Física, discentes do Curso de Graduação em Nutrição e residentes em Pediatria