45 resultados para Minério maciço hidrotermal
Resumo:
The final disposal of municipal solid waste in unsuitable areas without an infrastructure that meets the health measures and environmental protection, coupled with the lack of technical criteria in phase and decommissioning of the dump can promote environmental degradation. Alternatively to minimize the impacts of this activity for the stabilization of the area by isolating the massive waste with implementation of an adequate and finished by a layer of soil for plant growth final cover system. In this context, the present study aimed to evaluate the quality of the final cover in the area of a disabled dump the tropical semi-arid region in order to assist the process of recovery of these areas. The study area is located in the tropical semi-arid region in São João do Sabugi /RN. Soil samples were collected in the dump area and bushland as a benchmark of quality. To which they were subjected to analysis of physical attributes (particle density, bulk density, grain size and porosity), chemical properties (pH, K + , Na+ , Ca2 + , Mg2 + and Al3 + exchangeable, potential acidity, available phosphorus, sum of bases, CEC, base saturation, aluminum saturation, saturation Na + and adsorption ratio sodium, total organic carbon and total nitrogen) and total and soluble concentrations of heavy metals (Mn, Pb, Zn, Cd, Cu, Mo, Co, Cr, Ba and Ni). The differences between physical and chemical soil under native forest and final cover showing reduction of soil quality in the area off to the dump, which hinders the development of native vegetation and the recovery of the area. The absence of superior waterproofing to allow vertical transfer between the solid waste and the final cover promoted enrichment by chemical elements and heavy metals in excess can impair revegetation. Deficiencies found in the construction process of the final cover point to the need for intervention to accelerate the process of stabilization and recovery of the area of the local ecosystem
Resumo:
Problems associated to longitudinal interactions in buried pipelines are characterized as three-dimensional and can lead to different soil-pipe issues. Despite the progress achieved in research on buried pipelines, little attention has been given to the three-dimensional nature of the problem throughout the last decades. Most of researches simplify the problem by considering it in plane strain condition. This dissertation aims to present a study on the behavior of buried pipelines under local settlement or elevation, using three-dimensional simulations. Finite element code Plaxis 3D was used for the simulations. Particular aspects of the numerical modeling were evaluated and parametric analyzes were performed, was investigated the effects of soil arching in three-dimensional form. The main variables investigated were as follows: relative density, displacement of the elevation or settlement zone, elevated zone size, height of soil cover and pipe diameter/thickness ratio. The simulations were performed in two stages. The first stage was involved the validation of the numerical analysis using the physical models put forward by Costa (2005). In the second stage, numerical analyzes of a full-scale pipeline subjected to a localized elevation were performed. The obtained results allowed a detailed evaluation of the redistribution of stresses in the soil mass and the deflections along the pipe. It was observed the reduction of stresses in the soil mass and pipe deflections when the height of soil cover was decreased on regions of the pipe subjected to elevation. It was also shown for the analyzed situation that longitudinal thrusts were higher than vi circumferential trusts and exceeded the allowable stresses and deflections. Furthermore, the benefits of minimizing stress with technical as the false trench, compressible cradle and a combination of both applied to the simulated pipeline were verified
Resumo:
The Brejuí Mine, situated in the municipality of Currais Novos (RN), was responsible for the local economy growth between the years of 1943 and 1990, causing the interest of miner's working class to its urban center. After the end of scheelita extraction, the mine became a "theme park", in 2004. The company left its mark on the city by building several monuments in reference to the mining activity and the company's founder, Tomaz Salustino. However, there are no written records that describe such activities on its early years, nor their pioneers in the mining subject. Therefore, it is important to investigate the miner’s memories and ask if, along the more than five decades that lasted the heyday of mining, an identity linked to the profession was built; the extent to which workers make reference to this history as membersand what are the symbols that are being triggered in the development of a working class identity. Further, I investigate what memory was mad concerning the pioneers, mostly farmers attracted by miner work. To do so, I make use of audiovisual archival resources and oral records of the interlocutors that were filmed in the preparations of the documentary “Lembranças de velhos garimpeiros". We have noticed that, in the script of the official history of the Brejuí Mine, the "boss" figure overlaps the workers and that the forms patronage, originated from the rural world, followed punctuating the social relations in the mine. Today, with the resumption of the mining activity, it is possible that the strengthening of the working class and the Seridó miner identity desire reborn.
Resumo:
Population aging is a global demographic trend. This process is a reality that merits attention and importance in recent years, and cause considerable impact in terms of greater demands on the health sector, social security and special care and attention from families and society as a whole. Thus, in the context of addressing the consequences of demographic transition, population aging is characterized as a major challenge for Brazilian society. Therefore, this study was conducted in two main objectives. In the first article, variables of socioeconomic and demographic contexts were employed to identify multidimensional profiles of elderly residents in the Northeast capitals, from specific indicators from the 2010 Census information Therefore, we used the Grade of Membership Method (GoM), whose design profiles admits that an individual belongs to different degrees of relevance to multiple profiles in order to identify socioeconomic and demographic factors associated with living conditions of the elderly in the Northeastern capitals. The second article examined the possible relationship between mortality from chronic diseases and socio-economic indicators in the elderly population, of the 137 districts in Natal, broken down by ten-year age groups (60 to 69 years, 70-79 years and 80 and over. The microdata from the Mortality Information System (SIM), was used, provided by the Health Secretariat of Christmas, and population information came from the Population Census 2010. The method refers to the Global and Local Index neighborhood logic (LISA) Moran, whose spatial distribution from the choropleth maps allowed us to analyze the mortality of the elderly by neighborhoods, according to socioeconomic and demographic indicators, according to the presence of special significance. In the first article, the results show the identification of three extreme profiles. The Profile 1 which is characterized by median socioeconomic status and contributes 35.5% of elderly residents in the area considered. The profile 2 which brings together seniors with low socioeconomic status characteristics, with a percentage of 24.8% of cases. And the Profile 3 composing elderly with features that reveal better socioeconomic conditions, about 29.7% of the elderly. Overall, the results point to poor living conditions represented by the definition of these profiles, mainly expressed by the results observed in more than half of the northeastern elderly experience a situation of social vulnerability given the large percentage that makes up the Profile 1 and Profile 2, adding 60% of the elderly. In the second article, the results show a higher proportion of elderly concentrated in the neighborhoods of higher socioeconomic status, such as Petrópolis and LagoaSeca. Mortality rates, according to the causes of death and standardized by the empirical Bayesian method were distributed locally as follows: Neoplasms (Reis Santos, New Discovery, New Town, Grass Soft and Ponta Negra); Hypertensive diseases (Blue Lagoon, Potengi, Redinha, Reis Santos, Riverside, Lagoa Nova, Grass Soft, Neópolis and Ponta Negra); Acute Myocardial Infarction (Northeast, Guarapes and grass Soft); Cerebrovascular diseases (Petrópolis and Mother Luiza); Pneumonia (Ribeira, Praia do Meio, New Discovery, Grass Soft and Ponta Negra); Chronic Diseases of the Lower Way Airlines (Igapó, Northeast and Thursdays). The present findings at work may contribute to other studies on the subject and development of specific policies for the elderly.
Resumo:
Population aging is a global demographic trend. This process is a reality that merits attention and importance in recent years, and cause considerable impact in terms of greater demands on the health sector, social security and special care and attention from families and society as a whole. Thus, in the context of addressing the consequences of demographic transition, population aging is characterized as a major challenge for Brazilian society. Therefore, this study was conducted in two main objectives. In the first article, variables of socioeconomic and demographic contexts were employed to identify multidimensional profiles of elderly residents in the Northeast capitals, from specific indicators from the 2010 Census information Therefore, we used the Grade of Membership Method (GoM), whose design profiles admits that an individual belongs to different degrees of relevance to multiple profiles in order to identify socioeconomic and demographic factors associated with living conditions of the elderly in the Northeastern capitals. The second article examined the possible relationship between mortality from chronic diseases and socio-economic indicators in the elderly population, of the 137 districts in Natal, broken down by ten-year age groups (60 to 69 years, 70-79 years and 80 and over. The microdata from the Mortality Information System (SIM), was used, provided by the Health Secretariat of Christmas, and population information came from the Population Census 2010. The method refers to the Global and Local Index neighborhood logic (LISA) Moran, whose spatial distribution from the choropleth maps allowed us to analyze the mortality of the elderly by neighborhoods, according to socioeconomic and demographic indicators, according to the presence of special significance. In the first article, the results show the identification of three extreme profiles. The Profile 1 which is characterized by median socioeconomic status and contributes 35.5% of elderly residents in the area considered. The profile 2 which brings together seniors with low socioeconomic status characteristics, with a percentage of 24.8% of cases. And the Profile 3 composing elderly with features that reveal better socioeconomic conditions, about 29.7% of the elderly. Overall, the results point to poor living conditions represented by the definition of these profiles, mainly expressed by the results observed in more than half of the northeastern elderly experience a situation of social vulnerability given the large percentage that makes up the Profile 1 and Profile 2, adding 60% of the elderly. In the second article, the results show a higher proportion of elderly concentrated in the neighborhoods of higher socioeconomic status, such as Petrópolis and LagoaSeca. Mortality rates, according to the causes of death and standardized by the empirical Bayesian method were distributed locally as follows: Neoplasms (Reis Santos, New Discovery, New Town, Grass Soft and Ponta Negra); Hypertensive diseases (Blue Lagoon, Potengi, Redinha, Reis Santos, Riverside, Lagoa Nova, Grass Soft, Neópolis and Ponta Negra); Acute Myocardial Infarction (Northeast, Guarapes and grass Soft); Cerebrovascular diseases (Petrópolis and Mother Luiza); Pneumonia (Ribeira, Praia do Meio, New Discovery, Grass Soft and Ponta Negra); Chronic Diseases of the Lower Way Airlines (Igapó, Northeast and Thursdays). The present findings at work may contribute to other studies on the subject and development of specific policies for the elderly.
Resumo:
The focus of this study is to draw attention to the intergenerational family’s lifestyles and their various ways of cohabitation, in special to those families which are made by individuals of different generations, these families being constituted of, two or more individuals, or, two or more smaller families, which live under the same roof and have the elderly person as referential in their cohabitation. In those types of families, as for their ways of organization, it is interesting to note that the researches and productions done by inner architects and inner designers do not include this type of family arrangement because their studies do not cover this kind of structuralization nor was this type of organization put together with any of the ways of cohabitation. Therefore there is a theoretical concept void which is propositional, interventional and does not relate to the empirical reality. In observation to these remarks, the research starts a theoretic challenge of deconstruct or reconstruct our modern only habitational template, which is used today in all families configurations which out any regards to where this template will be used, unfitting to the intergenerational families who have elders. This study is then meant to give an differential analysis of the various domestic space’s templates in regards to the new families formats, their basic and special necessities, the home identities of those families which indicates the differential gap in housing and lifestyle from the higher social classes in comparison to the lower social classes. The interdisciplinary method was chosen in order to describe arrangements found in the lifestyles and the ways of cohabitation of the intergenerational families, this method is used for its knowledge base that better articulates the procedure method and the inductive reflexive approach made possible after an qualitative research. In order to accomplish that, an geographical space which tow real possibilities was selected, that is, the space where the people of great social and anthropological proximity are concentrated and the people which are the researcher kinships and friends, in between those are the habitants of Capim Macio’s, Candelária’s, Tirol’s and Petrópolis’s, neighborhoods, located in the south west zone of her home city Natal. It has been noticed that, meanwhile these intergenerational spaces do not claim their said spaces, because of their habits, necessities and relations in between generations and gender, their arrangements of said space are extremely creative. That means that alterations in the concepts of planning, construction and utilization of built spaces are imperative.
Resumo:
The focus of this study is to draw attention to the intergenerational family’s lifestyles and their various ways of cohabitation, in special to those families which are made by individuals of different generations, these families being constituted of, two or more individuals, or, two or more smaller families, which live under the same roof and have the elderly person as referential in their cohabitation. In those types of families, as for their ways of organization, it is interesting to note that the researches and productions done by inner architects and inner designers do not include this type of family arrangement because their studies do not cover this kind of structuralization nor was this type of organization put together with any of the ways of cohabitation. Therefore there is a theoretical concept void which is propositional, interventional and does not relate to the empirical reality. In observation to these remarks, the research starts a theoretic challenge of deconstruct or reconstruct our modern only habitational template, which is used today in all families configurations which out any regards to where this template will be used, unfitting to the intergenerational families who have elders. This study is then meant to give an differential analysis of the various domestic space’s templates in regards to the new families formats, their basic and special necessities, the home identities of those families which indicates the differential gap in housing and lifestyle from the higher social classes in comparison to the lower social classes. The interdisciplinary method was chosen in order to describe arrangements found in the lifestyles and the ways of cohabitation of the intergenerational families, this method is used for its knowledge base that better articulates the procedure method and the inductive reflexive approach made possible after an qualitative research. In order to accomplish that, an geographical space which tow real possibilities was selected, that is, the space where the people of great social and anthropological proximity are concentrated and the people which are the researcher kinships and friends, in between those are the habitants of Capim Macio’s, Candelária’s, Tirol’s and Petrópolis’s, neighborhoods, located in the south west zone of her home city Natal. It has been noticed that, meanwhile these intergenerational spaces do not claim their said spaces, because of their habits, necessities and relations in between generations and gender, their arrangements of said space are extremely creative. That means that alterations in the concepts of planning, construction and utilization of built spaces are imperative.
Resumo:
The bioleaching of chalcopyrite has not been applied on a commercial scale due to the low process efficiency, so this process has been extensively studied in recent years. The bioleaching of chalcopyrite tailings becomes even more difficult by the presence of higher amounts of impurities, among them are the carbonates. The presence of carbonates in the ore promotes the increase in pH of the solution and may inhibit the development of bioleaching. Therefore, this research aims to apply the acid treatment for optimization of bioleaching process, in order to recover the lost copper throughout the process besides reducing the content of this toxic metal in the tailings pond. The removal and recovery of toxic metals is very important in protecting the environment and human health. The bioleaching experiments were performed in two stages, the first made up using the pre-treated tailing with sulfuric acid in bioleaching, and the second was made using the tailing without treatment with sulfuric acid addition at the beginning of bioleaching. The acid treatment was carried out in bioreactors with three different volumes of H2SO4 96% and a control experiment. All bioleaching experiments were performed in triplicate over a control, without addition of inoculum. The results showed that acid treatment was effective in removal of carbonates and managed to promote a good performance in the bioleaching of chalcopyrite in both steps studied, it is demonstrated that circa 47% copper recovery can be achieved.
Resumo:
The bioleaching of chalcopyrite has not been applied on a commercial scale due to the low process efficiency, so this process has been extensively studied in recent years. The bioleaching of chalcopyrite tailings becomes even more difficult by the presence of higher amounts of impurities, among them are the carbonates. The presence of carbonates in the ore promotes the increase in pH of the solution and may inhibit the development of bioleaching. Therefore, this research aims to apply the acid treatment for optimization of bioleaching process, in order to recover the lost copper throughout the process besides reducing the content of this toxic metal in the tailings pond. The removal and recovery of toxic metals is very important in protecting the environment and human health. The bioleaching experiments were performed in two stages, the first made up using the pre-treated tailing with sulfuric acid in bioleaching, and the second was made using the tailing without treatment with sulfuric acid addition at the beginning of bioleaching. The acid treatment was carried out in bioreactors with three different volumes of H2SO4 96% and a control experiment. All bioleaching experiments were performed in triplicate over a control, without addition of inoculum. The results showed that acid treatment was effective in removal of carbonates and managed to promote a good performance in the bioleaching of chalcopyrite in both steps studied, it is demonstrated that circa 47% copper recovery can be achieved.
Resumo:
Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato
Resumo:
The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.
Resumo:
The use of binders in the soil for the production of solid bricks is an old construction technique that has been used by several civilizations over time. At the same time, the need for environmental preservation and the tendency of scarcity of natural resources make the construction invest in researching new concepts, methods and materials for building systems for the sustainability of their economic activities. Thus arises the need to obtain building materials with low power consumption, capable of reducing the growing housing shortage of rural and urban population. Currently, research has been conducted on this topic to better understand the cementitious and pozzolanic reactions that occur in the formation of the microstructure of the soil-cement when added to other materials such as, for example, lime, and the relationship between microstructure and formed interfaces with the physical, mechanical and chemical analysis in compounds made from these ternary compositions. In this context, this study aimed to analyze the results of the influence of the incorporation of lime to the soil-cement to form a ternary mixture to produce soil-cement bricks and mortar without structural purposes. From the inclusion of contents of 6 %, 8 %, 10% and 12% lime to the soil, and soil-cement mixes in amounts of 2 %, 3 %, 4 % and 5 % were shaped-bodies of -cylindrical specimens to determine the optimum moisture content and maximum dry apparent specific weight. Then they were cured, and subjected to the tests of compressive strength, absorption and durability modified. Compositions obtained the best results in the tests performed on the bodies-of-proof cylindrical served as a parameter for molding of solid bricks, which underwent the same experimental methodology previously cited. The raw materials used, as well as compositions in which the bricks were molded solid, were characterized by physical and chemical tests, X-ray diffraction and scanning electron microscopy. The results obtained in the study indicate that the compositions studied, that showed the best results in terms of compressive strength, water absorption and durability ternary composition was soil, 10 % cement and 2 % lime
Resumo:
Fuel cells are electrochemical devices that convert chemical energy into electricity. Due to the development of new materials, fuel cells are emerging as generating clean energy generator. Among the types of fuel cells, categorized according to the electrode type, the solid oxide fuel cells (SOFC) stand out due to be the only device entirely made of solid particles. Beyond that, their operation temperature is relatively high (between 500 and 1000 °C), allowing them to operate with high efficiency. Another aspect that promotes the use of SOFC over other cells is their ability to operate with different fuels. The CeO2 based materials doped with rare earth (TR+3) may be used as alternatives to traditional NiO-YSZ anodes as they have higher ionic conductivity and smaller ohmic losses compared to YSZ, and can operate at lower temperatures (500-800°C). In the composition of the anode, the concentration of NiO, acting as a catalyst in YSZ provides high electrical conductivity and high electrochemical activity of reactions, providing internal reform in the cell. In this work compounds of NiO - Ce1-xEuxO2-δ (x = 0.1, 0.2 and 0.3) were synthesized from polymeric precursor, Pechini, method of combustion and also by microwave-assisted hydrothermal method. The materials were characterized by the techniques of TG, TPR, XRD and FEG-SEM. The refinement of data obtained by X-ray diffraction showed that all powders of NiO - Cex-1EuxO2-δ crystallized in a cubic phase with fluorite structure, and also the presence of Ni. Through the characterizations can be proved that all routes of preparation used were effective for producing ceramics with characteristics suitable for application as SOFC anodes, but the microwave-assisted hydrothermal method showed a significant reduction in the average grain size and improved control of the compositions of the phases
Resumo:
Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results
Resumo:
Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor