Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise

A argumentação como elemento discursivo na mídia digital: um estudo sobre o blog fatos e dados

This thesis studies the use of argumentation as a discursive element in digital media, particularly blogs. We analyzed the Blog "Fatos e Dados" [Facts and Data], created by Petrobras in the context of allegations of corruption that culminated in the installation of a Parliamentary Commission of Inquiry to investigate the company within the Congress. We intend to understand the influence that the discursive elements triggered by argumentation exercise in blogs and about themes scheduling. To this end, we work with notions of argumentation in dialogue with questions of language and discourse from the work of Charaudeau (2006), Citelli (2007), Perelman & Olbrechts-Tyteca (2005), Foucault (2007, 2008a), Bakhtin (2006) and Breton (2003). We also observe our subject from the perspective of social representations, where we seek to clarify concepts such as public image and the use of representations as argumentative elements, considering the work of Moscovici (2007). We also consider reflections about hypertext and the context of cyberculture, with authors such as Levy (1993, 1999, 2003), Castells (2003) and Chartier (1999 and 2002), and issues of discourse analysis, especially in Orlandi (1988, 1989, 1996 and 2001), as well as Foucault (2008b). We analyzed 118 posts published in the first 30 days of existence of the blog "Fatos e Dados" (between 2 June and 1 July 2009), and analyzed in detail the top ten. A corporate blog aims to defend the points of view and public image of the organization, and, therefore, uses elements of social representations to build their arguments. It goes beyond the blog, as the main news criteria, including the posts we reviewed, the credibility of Petrobras as the source of information. In the posts analyzed, the news values of innovation and relevance also arise. The controversy between the Blog and the press resulted from an inadequacy and lack of preparation of media to deal with a corporate blog that was able to explore the characteristics of liberation of the emission pole in cyberculture. The Blog is a discursive manifestation in a concrete historical situation, whose understanding and attribution of meaning takes place from the social relations between subjects that, most of the time, place themselves in discursive and ideological dispute between each other - this dispute also affects the movements of reading and reading production. We conclude that intersubjective relationships that occur in blogs change, in the form of argumentative techniques used, the notions of news criteria, interfering with scheduling of news and organization of information in digital media outlets. It is also clear the influence that the discursive elements triggered by argumentation exercise in digital media, trying to resize and reframe frames of reality conveyed by it in relation to the subject-readers. Blogs have become part of the scenario information with the emergence of the Internet and are able to interfere in a more effective way to organize the scheduling of media from the conscious utilization of argumentative elements in their posts

Avaliação clínica e radiográfica das complicações técnicas em próteses sobre implantes

The evaluation criteria of the cases treated with dental implants are based on clinical and radiographic tests. In this context it is important to conduct research to determine prognosis of different types of prosthetic rehabilitation and determination of the main problems affecting this type of treatment. Thus, the objective of this study was to assess the prosthetic conditions of individuals rehabilitated with implant-supported prosthesis. In this cross-sectional study 153 patients were treated, accounting for a sample of 509 implants. The failures were observed by clinical and radiographic examination. The results showed that the fracture (0.2%) loss (0.4%) and loosening of the screws (3.3%) were failures are less frequent. The fracture structures as the resin (12.4%), porcelain (5.5%) and metallic (1.5%), loss of resin that covers the screw (23.8%) and loss of retention overdentures on implants (18.6%) had a higher occurrence. The failure of adaptation between the abutment and the implant (6.9%) and especially between the prosthesis and the abutment (25.4%) had a high prevalence and, when related to other parameters showed a significant association, particularly with the cemented prosthesis (OR = 6.79). It can be concluded that to minimize the appearance of failures, protocols must be observed from diagnosis to the settlement and control of prostheses on implants, particularly with respect to technical steps of the making of the prosthesis and care in radiographic evaluating the fit between their components

Um framework conceitual para apoiar a instrumentação da avaliação formativa da aprendizagem em jogos digitais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Análise da relação causal entre imagem de destinos, qualidade, satisfação e fidelidade: um estudo de acordo com a percepção do turista nacional no destino turístico Natal

This dissertation aims to analyze the causal relationship between the quality of tourist services, satisfaction with the attributes and globally, fidelity and image of tourist destinations. Therefore, it was conducted an exploratory, descriptive research with quantitative analytical approach. Data collection was performed by a questionnaire addressed to tourists at the Augusto Severo International Airport and Bus station of Natal, the main points of entry and exit of tourists. The composition was simple random sampling by reaching the final number of 400 tourists interviewed. Among the main results, is an assessment of the quality of the components of the destination. It was noted that nine are the dimensions of perceived quality of tourism products and services of ―Sun and Sand‖ segment, that is, Beaches and Facilities, Public Equipment, Catering Services, Transportation, Hotel Equipment, Hotel Services, Entertainment & Attractions, Access to the Hotel and Hospitality. Moreover, it was concluded that the Preview Tourism Destination Image has little direct influence in the Consumer Satisfaction, and only indirectly in the Post-Purchase Behavior. While the Complex Tourism Destination Image exerts strong and direct influence on both factors, in the Customer Satisfaction Process and Loyalty, the dimensions of quality also claimed to be strongly influences both factors

Diagnóstico da degradação ambiental no município de Areia Branca-RN por geotecnologias

The municipality of Areia Branca is within the mesoregion of West Potiguar and within the microregion of Mossoró, covering an area of 357,58 km2. Covering an area of weakness in terms of environmental, housing, together with the municipality of Grossos-RN, the estuary of River Apodi-Mossoró. The municipality of Areia Branca has historically suffered from a lack of planning regarding the use and occupation of land as some economic activities, attracted by the extremely favorable natural conditions, have exploited their natural resources improperly. The aim of this study is to quantify and analyze the environmental degradation in the municipality. Thus initially was performed a characterization of land use using remote sensing, geoprocessing and geographic information system GIS in order to generate data and information on the municipal scale, which may serve as input to the environmental planning and land use planning in the region. From this perspective, were used a Landsat 5 image TM sensor for the year 2010. In the processing of this image was used SPRING 5.2 and applied a supervised classification using the classifier regions, which was employed Bhattacharya Distance method with a threshold at 30%. Thus was obtained the land use map that was analyzed the spatial distribution of different types of the use that is occurring in the city, identifying areas that are being used incorrectly and the main types of environmental degradation. And further, were applied the methodology proposed by Beltrame (1994), Physical Diagnosis Conservationist under some adaptations for quantifying the level of degradation or conservation study area. As results, the indexes were obtained for the parameters in the proposed methodology, allowing quantitatively analyze the degradation potential of each sector. From this perspective, considering a scale of 0 to 100, sector A and sector B had value 31.20 units of risk of physical deterioration. And the C sector, has shown its value - 34.64 units degradation risk and should be considered a priority in relation to the achievement of conservation actions

Cartografia temporal e análise geoambiental da dinâmica da foz do Rio Piranhas-Açu, regiao de Macau-RN, com base em imagens Landast 5-MT

This work embraces the application of Landsat 5-TM digital images, comprising August 2 1989 and September 22 1998, for temporal mapping and geoenvironmental analysis of the dynamic of Piranhas-Açu river mouth, situated in the Macau (RN) region. After treatment using several digital processing techniques (e.g. colour composition in RGB, ratio of bands, principal component analysis, index methods, among others), it was possible to generate several image products and multitemporal maps of the coastal morphodynamics of the studied area. Using the image products it was possible the identification and characterization of the principal elements of interest (vegetation, soil, geology and water) in the surface of the studied area, associating the spectral characteristics of these elements to that presented by the image products resulting of the digital processing. Thus, it was possible to define different types of soils: Amd, AQd6, SK1 and LVe4; vegetation grouping: open arboreal-shrubby caatinga, closed arborealshrubby caatinga, closed arboreal caatinga, mangrove vegetation, dune vegetation and areas predominately constituted by juremas; geological units: quaternary units beach sediments, sand banks, dune flats, barrier island, mobile dunes, fixed dunes, alluvium, tidal and inundation flats, and sandy facies of the Potengi Formation; tertiary-quaternary units Barreiras Formation grouped to the clayey facies of the Potengi Formation, Macau Formation grouped to the sediments of the Tibau Formation; Cretaceous units Jandaíra Formation; moreover it was to identify the sea/land limit, shallow submersed areas and suspended sediments. The multitemporal maps of the coastal morphodynamics allowed the identification and a semi-quantitative evoluation of regions which were submitted to erosive and constructive processes in the last decade. This semi-quantitative evoluation in association with an geoenvironmental characterization of the studied area are important data to the elaboration of actions that may minimize the possible/probable impacts caused by the implantation of the Polo Gas/Sal and to the monitoring of areas explorated by the petroleum and salt industries

Um sistema inteligente de teleoftalmologia para o auxílio no diagnóstico de catarata

The increasing in world population, with higher proportion of elderly, leads to an increase in the number of individuals with vision loss and cataracts are one of the leading causes of blindness worldwide. Cataract is an eye disease that is the partial or total opacity of the crystalline lens (natural lens of the eye) or its capsule. It can be triggered by several factors such as trauma, age, diabetes mellitus, and medications, among others. It is known that the attendance by ophthalmologists in rural and poor areas in Brazil is less than needed and many patients with treatable diseases such as cataracts are undiagnosed and therefore untreated. In this context, this project presents the development of OPTICA, a system of teleophthalmology using smartphones for ophthalmic emergencies detection, providing a diagnostic aid for cataract using specialists systems and image processing techniques. The images are captured by a cellphone camera and along with a questionnaire filled with patient information are transmitted securely via the platform Mobile SANA to a online server that has an intelligent system available to assist in the diagnosis of cataract and provides ophthalmologists who analyze the information and write back the patient’s report. Thus, the OPTICA provides eye care to the poorest and least favored population, improving the screening of critically ill patients and increasing access to diagnosis and treatment.

LCD-OpenPACS: sistema integrado de telerradiologia com auxílio ao diagnóstico de nódulos pulmonares em exames de tomografia computadorizada

Lung cancer is one of the most common types of cancer and has the highest mortality rate. Patient survival is highly correlated with early detection. Computed Tomography technology services the early detection of lung cancer tremendously by offering aminimally invasive medical diagnostic tool. However, the large amount of data per examination makes the interpretation difficult. This leads to omission of nodules by human radiologist. This thesis presents a development of a computer-aided diagnosis system (CADe) tool for the detection of lung nodules in Computed Tomography study. The system, called LCD-OpenPACS (Lung Cancer Detection - OpenPACS) should be integrated into the OpenPACS system and have all the requirements for use in the workflow of health facilities belonging to the SUS (Brazilian health system). The LCD-OpenPACS made use of image processing techniques (Region Growing and Watershed), feature extraction (Histogram of Gradient Oriented), dimensionality reduction (Principal Component Analysis) and classifier (Support Vector Machine). System was tested on 220 cases, totaling 296 pulmonary nodules, with sensitivity of 94.4% and 7.04 false positives per case. The total time for processing was approximately 10 minutes per case. The system has detected pulmonary nodules (solitary, juxtavascular, ground-glass opacity and juxtapleural) between 3 mm and 30 mm.

Auditoria de inteligência: um método para o diagnóstico de sistemas de inteligência competitiva e organizacional

CARVALHO, Andréa Vasconcelos ; ESTEBAN NAVARRO, Miguel Ángel. . Auditoria de Inteligência: um método para o diagnóstico de sistemas de inteligência competitiva e organizacional. In: XI ENANCIB - Encontro Nacional de Pesquisa em Ciência da Informação, 2010, Rio de Janeiro. Anais do XI ENANCIB. Rio de Janeiro: ANCIB, 2010.

Diagnóstico da cultura organizacional em hospitais da rede privada de Natal/RN

As peculiaridades presentes no ser humano são observadas a partir da manifestação de sua cultura. Estas manifestações podem ser influenciadas pelo contexto social do indivíduo. A cultura nacional é uma destas influências. A brasileira, por exemplo, possui alguns traços nacionais peculiares ao seu povo que amenizam a sua complexidade e pluralidade. Estes traços podem se tornar influentes na cultura organizacional, através da manifestação das práticas e dos valores utilizados pela organização. Diante disso, o presente trabalho teve como objetivo diagnosticar a cultura organizacional dos hospitais, enfatizando as práticas e os valores organizacionais e a percepção dos colaboradores sobre a cultura organizacional. A metodologia utilizada na pesquisa foi de caráter descritivo e explicativo. A pesquisa ocorreu através da aplicação do Instrumento Brasileiro para a Avaliação da Cultura Organizacional IBACO, com 283 sujeitos distribuídos em três hospitais da rede privada de Natal/RN. As evidências encontradas pelo estudo foram analisadas através do software estatístico SPSS, com as técnicas multivariadas de análise fatorial, análise de aglomerados e análise discriminante. A partir dessas análises, foram obtidos cinco fatores distribuídos entre práticas e valores apresentados pelo IBACO, que foram: as práticas de recompensa e treinamento; integração externa e promoção do relacionamento interpessoal; e, os valores de satisfação, bem-estar e cooperação dos empregados e profissionalismo competitivo. Os grupos encontrados na análise apresentaram divergências de opinião quanto às práticas e os valores utilizados nos hospitais. Concluiu-se, portanto, que o Hospital A apresentou uma cultura mais proativa e voltada mais para a satisfação e bem-estar dos funcionários. Já os outros dois hospitais apresentaram culturas semelhantes, com limitações quanto à valorização do bem-estar e da cooperação entre os colaboradores, porém com uma boa prática do relacionamento interpessoal

Comunicação e imagem organizacional: um estudo de suas relações no comércio varejista de shopping centers

This study shows the results of an exploratory-descriptive research that aimed to identify the latent dimensions of communication, as well as finding relations between such dimensions and organizational image. The sample came to a total of 267 respondents, being 89 managers or owners and 178 salespeople of clothing and footwear stores that are situated in the main five shopping centers located in Natal, capital of Rio Grande do Norte. The collection of the data was made by the use of two structuralized and validated instruments, being the answers measured in the likert scale of 6 points. For the measurement of communication it was used the instrument developed by Downs and Hazen (2002), made up of 8 latent dimensions and 32 indicators. For the image it was used the model of Mael and Ashforth (1992) that contains 5 indicators. The analysis of the data was made through of the use of statistical techniques of factorial analysis and structural equations modeling. The results of the factorial analysis demonstrated communication as being formed by five latent dimensions. The modeling, on the other hand, demonstrated to exist positive relations between communication and organizational image, whose results revealed that the image is influenced by the communication with the supervisor, by the organizational integration and as being stronger explained by the vertical communication

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index