51 resultados para Características sistema
Resumo:
In this work were synthesized and studied the spectroscopic and electrochemical characteristics of the coordination compounds trans-[Co (cyclam)Cl2]Cl, trans- Na[Co(cyclam)(tios)2], trans-[Co(en)2Cl2]Cl and trans-Na[Co(en)2(tios)2], where tios = thiosulfate and en = ethylenediamine. The compounds were characterized by: Elemental Analysis (CHN), Absorption Spectroscopy in the Infrared (IR), Uv-Visible Absorption Spectroscopy, Luminescence Spectroscopy and Electrochemistry (cyclic voltammetry). Elemental Analysis (CHN) suggests the following structures for the complex: trans- [Co(cyclam)Cl2]Cl.6H2O and trans-Na[Co(cyclam)(tios)2].7H2O. The electrochemical analysis, when compared the cathodic potential (Ec) processes of the complexes trans- [Co(cyclam)Cl2]Cl and trans-[Co(en)2Cl2]Cl, indicated a more negative value (-655 mV) for the second complex, suggesting a greater electron donation to the metal center in this complex which can be attributed to a greater proximity of the nitrogen atoms of ethylenediamine in relation to metal-nitrogen cyclam. Due to the effect of setting macrocyclic ring to the metal center, the metal-nitrogen bound in the cyclam are not as close as the ethylenediamine, this fact became these two ligands different. Similar behavior is also observed for complexes in which the chlorides are replaced by thiosulfate ligand, trans-Na[Co(en)2(tios)2] (-640 mV) and trans-Na[Co(cyclam)(tios)2] (-376 mV). In absorption spectroscopy in the UV-visible, there is the band of charge transfer LMCT (ligand p d* the metal) in the trans-Na[Co(cyclam)(tios)2] (350 nm, p tios d* Co3+) and in the trans-Na[Co(en)2(tios)2] (333 nm, p tios d* Co3+), that present higher wavelength compared to complex precursor trans- [Co(cyclam)Cl2]Cl (318 nm, pCl d* Co3+), indicating a facility of electron density transfer for the metal in the complex with the thiosulfate ligand. The infrared analysis showed the coordination of the thiosulfate ligand to the metal by bands in the region (620-635 cm-1), features that prove the monodentate coordination via the sulfur atom. The νN-H bands of the complexes with ethylenediamine are (3283 and 3267 cm-1) and the complex with cyclam bands are (3213 and 3133 cm-1). The luminescence spectrum of the trans-Na[Co(cyclam)(tios)2] present charge transfer band at 397 nm and bands dd at 438, 450, 467, 481 and 492 nm.
Resumo:
Alkyl polyethoxylates are surfactants widely used in vastly different fields, from oil exploitation to pharmaceutical applications. One of the most interesting characteristics of these surfactants is their ability to form micellar systems with specific geometry, the so-called wormlike micelle. In this work, microemulsions with three distinct compositions (C/T = 40 %, 30 % and 25 %) was used with contain UNITOL / butanol / water / xylene, cosurfactant / surfactante (C/S) ratio equal to 0,5. The microemulsion was characterized by dynamic light scattering (DLS), capillary viscometry, torque rheometry and surface tensiometry experiments carried out with systems based on xylene, water, butanol (cosurfactant) and nonaethyleneglycolmonododecyl ether (surfactant), with fixed surfactant:cosurfactant:oil composition (with and without oil phase) and varying the overall concentration of the microemulsion. The results showed that a transition from wormlike micelles to nanodrops was characterized by maximum relative viscosity (depending on how relative viscosity was defined), which was connected to maximum effective diameter, determined by DLS. Surface tension suggested that adsorption at the air water interface had a Langmuir character and that the limiting value of the surfactant surface excess was independent of the presence of cosurfactant and xylene. The results of the solubilization of oil sludge and oil recovery with the microemulsion: C/S = 40%, 30% and 25% proved to be quite effective in solubilization of oil sludge, with the percentage of solubilization (%solubilization) as high as 92.37% and enhanced oil recovery rates up to 90.22% for the point with the highest concentration of active material (surfactant), that is, 40%.
Resumo:
Despite the emergence of other forms of artificial lift, sucker rod pumping systems remains hegemonic because of its flexibility of operation and lower investment cost compared to other lifting techniques developed. A successful rod pumping sizing necessarily passes through the supply of estimated flow and the controlled wear of pumping equipment used in the mounted configuration. However, the mediation of these elements is particularly challenging, especially for most designers dealing with this work, which still lack the experience needed to get good projects pumping in time. Even with the existence of various computer applications on the market in order to facilitate this task, they must face a grueling process of trial and error until you get the most appropriate combination of equipment for installation in the well. This thesis proposes the creation of an expert system in the design of sucker rod pumping systems. Its mission is to guide a petroleum engineer in the task of selecting a range of equipment appropriate to the context provided by the characteristics of the oil that will be raised to the surface. Features such as the level of gas separation, presence of corrosive elements, possibility of production of sand and waxing are taken into account in selecting the pumping unit, sucker-rod strings and subsurface pump and their operation mode. It is able to approximate the inferente process in the way of human reasoning, which leads to results closer to those obtained by a specialist. For this, their production rules were based on the theory of fuzzy sets, able to model vague concepts typically present in human reasoning. The calculations of operating parameters of the pumping system are made by the API RP 11L method. Based on information input, the system is able to return to the user a set of pumping configurations that meet a given design flow, but without subjecting the selected equipment to an effort beyond that which can bear
Resumo:
The process for choosing the best components to build systems has become increasingly complex. It becomes more critical if it was need to consider many combinations of components in the context of an architectural configuration. These circumstances occur, mainly, when we have to deal with systems involving critical requirements, such as the timing constraints in distributed multimedia systems, the network bandwidth in mobile applications or even the reliability in real-time systems. This work proposes a process of dynamic selection of architectural configurations based on non-functional requirements criteria of the system, which can be used during a dynamic adaptation. This proposal uses the MAUT theory (Multi-Attribute Utility Theory) for decision making from a finite set of possibilities, which involve multiple criteria to be analyzed. Additionally, it was proposed a metamodel which can be used to describe the application s requirements in terms of the non-functional requirements criteria and their expected values, to express them in order to make the selection of the desired configuration. As a proof of concept, it was implemented a module that performs the dynamic choice of configurations, the MoSAC. This module was implemented using a component-based development approach (CBD), performing a selection of architectural configurations based on the proposed selection process involving multiple criteria. This work also presents a case study where an application was developed in the context of Digital TV to evaluate the time spent on the module to return a valid configuration to be used in a middleware with autoadaptative features, the middleware AdaptTV
Resumo:
The studied area is geologically located in the Northern Domain of the Borborema Province (Northeast Brazil), limited to the south by the Patos shear zone. Terranes of the Jaguaribeano system are dominant, flanked by the Piranhas (E and S sides) and Central Ceará (NE side) terranes. Its basement comprises gneiss -migmatite terrains of Paleoproterozoic to Archean age (2.6 to 1.9 Ga old), overprinted by neoproterozoic to cambrian tectonotherma l events. Narrow supracrustal belts ( schist belts) display a 1.6 to 1.8 Ga age, as shown by whole - rock Rb-Sr and zircon U-Pb and Pb/Pb dates in acid metavolcanics which dominate in the lower section of these sequences, and in coeval metaplutonics (granitic augen gneisses). From the stratigraphic point of view, three Staterian belts are recognized: 1. Orós Belt - made up by the Orós Group, subdivided in the Santarém (predominantly pure to impure quartzites, micaschists and metacarbonates) and Campo Alegre (metandesites, metabasalts, metarhyolites and metarhyodacites, interlayered with metatuffs and metasediments) formations, and by the Serra do Deserto Magmatic Suite (granitic augen gneisses). 2. Jaguaribe Belt - its lithostratigrahic-lithodemic framework is similar to the one of the Orós Belt, however with a greater expression of the volcano -plutonic components (Campo Alegre Formation and Serra do Deserto Magmatic Suite). The Peixe Gordo Sequence, separately described, is also related to this belt and contain s metasedimentary, metavolcanic (with subordinated volcanoclastics) and metaplutonic units. The first one correlated to the Orós Group and the latter the Serra do Deserto Magmatic Suite. 3. Western Potiguar Belt - represented by the Serra de São José Gro up, subdivided in the Catolezinho (biotite -amphibole gneisses with intercalations of metacarbonates, calcsilicate rocks, amphibolites and quartzite beds to the top) and Minhuins (quartzites, micaschists, metaconglomerates, calcsilicate rocks, acid to the b asic metavolcanics and metatuffs) formations. Its late Paleoproterozoic (Staterian) age was established by a Pb/Pb date on zircons from a granitic orthogneiss of the Catolezinho Formation. The petrographic characteristics and sedimentary structures of the Santarém Formation of the Orós Group point to deltaic to shallow marine depositional systems, overlain by deep water deposits (turbidites). The geodynamic setting of this region encompassed a large depositional basin, probably extending to the east of the Portalegre shear zone and west of the Senador Pompeu shear zone, with possible equivalents in the Jucurutu Formation of the Seridó Belt and in the Ceará Group of central Ceará. The Arneiróz Belt, west Ceará, displays some stratigraphic features and granito ids geochemically akin to the ones of the Orós Belt. The evolutionary setting started with an extensional phase which was more active in the eastern part of this domain (Western Potiguar and part of the Jaguaribe belts), where the rudite and psamite sedime ntation relates to a fluviatile rift environment which evolved to a prograding deltaic system to the west (Orós Group). The basaltic andesitic and rhyolitic volcanics were associated to this extensional phase. During this magmatic event, acid magmas also crystallized at plutonic depths. The Orós Group illustrates the environmental conditions in the western part of this domain. Later on, after a large time gap (1.6 to 1.1 Ga), the region was subjected to an extensional deformational episode marked by 900 Ma old (Sm-Nd data) basic rocks, possibly in connection with the deposition of the Cachoeirinha Group south of the Patos shear zone. In the 800 to 500 Ma age interval, the region was affected by important deformational and metamorphic events coupled with in trusion of granitic rocks of variable size (dykes to batholiths), related to the Brasiliano/Pan -African geotectonic cycle. These events produced structural blocks which differentiate, one from the other, according to the importance of anatectic mobilizatio n, proportion of high-grade supracrustals and the amount of neoproterozoic -cambrian granitoid intrusions. On this basis, a large portion of the Jaguaretama Block/Terrane is relatively well preserved from this late overprint. The border belts of the Jagua retama Block (Western Potiguar and Arneiroz) display kyanite-bearing (medium pressure) mineral associations, while in the inner part of the block there is a north-south metamorphic zoning marked by staurolite or sillimanite peak metamorphic conditions. Regarding the deformations of the Staterian supracrustal rocks, second and third phases were the most important, diagnosed as having developed in a progressive tectonic process. In the general, more vigorous conditions of PT are related to the interval tardi - phase 2 early-phase 3, whose radiometric ages and regional structuring indicators places it in the Brasiliano/Pan-African Cycle. In the Staterian geodynamic setting of Brazilian Platform , these sequences are correlated to the lower Espinhaço Supergroup (p.ex., Rio dos Remédios and Paraguaçu groups, a paleproterozoic rift system in the São Francisco Craton), the Araí and Serra da Mesa groups (north of Goiás, in the so -called Goiás Central Massif), and the Uatumã Group (in the Amazonian Craton). Granitic ( augen gneisses) plutonics are also known from these areas, as for example the A-type granites intrusive in the Araí and Serra da Mesa groups, dated at 1.77 Ga. Gravimetric and geological data place the limits of the Jaguaribeano System (terranes) along the Senador Pompeu Shear Zone (western border) and the Portalegre- Farias Brito shear zone (eastern and southern). However, the same data area not conclusive as regards the interpretation of those structures as suture of the terrane docking process. The main features of those shear zones and of involved lothological associations, appear to favour an intracontinental transpressional -transcurrent regime, during Neoproterozoic-Cambrian times, marking discontinuities along which different crustal blocks were laterally dispersed. Inside of this orogenic system and according to the magnetic data (total field map), the most important terrane boundary appears to be the Jaguaribe shear zone. The geochronological data, on some tectonostratigraphic associations (partly represented by the Ceará and Jucurutu groups), still at a preliminary level, besides the lack of granitic zonation and other petrotectonic criteria, do not allow to propose tectonic terrane assembly diagrams for the studied area
Resumo:
The importance of the Professionals Master in the field of science education is revealed by the recognition that they provide, to practicing teachers, in particular, training spaces for reflection and application of knowledge. This work appears in the context of the project "Research and training in teaching science and mathematics: a cutout of academic production in the northeast and overview of formative action in basic education" on the Centre for Education program, which main objective was to conduct studies description, analysis and evaluation of the academic production of Postgraduate Programs in Science Teaching of UFRPE, UFRN and UEPB and investigate the contribution of continuing education in stricto sensu level, of graduated teachers to improve the quality of basic education . We sought to examine a cut of academic production PPGECNM / UFRN, taking as reference dissertations of Natural Sciences, finished between the years 2005 and 2012, which have developed and applied educational products for high school students. More specifically we sought to conduct a general characterization of the dissertations analyzed for basic descriptors, to understand if and how the official documents governing the Brazilian education, especially science education, subsidized development of dissertations and identify current trends for science teaching are addressed and which ones are used in preparing the product of dissertations. The survey was based on documentary analysis, a type of qualitative approach in which the documents are objects of study in themselves. The results revealed that most of the work was developed in public schools, on subjects of physics and chemistry. During analytical reading of the text of the dissertations was observed that, in its construction, most of them addressed somehow, official documents governing the Brazilian educational system, that the products are basically teaching units and teaching approaches that are more focused on Experimentation and History and Philosophy of Science
Resumo:
Mathematical Morphology presents a systematic approach to extract geometric features of binary images, using morphological operators that transform the original image into another by means of a third image called structuring element and came out in 1960 by researchers Jean Serra and George Matheron. Fuzzy mathematical morphology extends the operators towards grayscale and color images and was initially proposed by Goetherian using fuzzy logic. Using this approach it is possible to make a study of fuzzy connectives, which allows some scope for analysis for the construction of morphological operators and their applicability in image processing. In this paper, we propose the development of morphological operators fuzzy using the R-implications for aid and improve image processing, and then to build a system with these operators to count the spores mycorrhizal fungi and red blood cells. It was used as the hypothetical-deductive methodologies for the part formal and incremental-iterative for the experimental part. These operators were applied in digital and microscopic images. The conjunctions and implications of fuzzy morphology mathematical reasoning will be used in order to choose the best adjunction to be applied depending on the problem being approached, i.e., we will use automorphisms on the implications and observe their influence on segmenting images and then on their processing. In order to validate the developed system, it was applied to counting problems in microscopic images, extending to pathological images. It was noted that for the computation of spores the best operator was the erosion of Gödel. It developed three groups of morphological operators fuzzy, Lukasiewicz, And Godel Goguen that can have a variety applications
Resumo:
Tailings dams are structures that aims to retain the solid waste and water from mining processes. Its analysis and planning begins with searching of location for deployment, step on which to bind all kinds of variables that directly or indirectly influence the work, such as geological, hydrological, tectonic, topographic, geotechnical, environmental, social characteristics, evaluation security risks, among others. Thus, this paper aims to present a study on the most appropriate and secure type of busbar to design a layout structure of iron ore tailings, taking into account all the above mentioned variables. The case study involves the assessment of sites for location of dams of tailings disposal beneficiation of iron mine to be built in Bonito, in the municipality of Jucurutu in Seridó Potiguar. For site selection among alternatives, various aspects of the current state of the art were considered, one that causes the least environmental impact, low cost investment, adding value to the product and especially the safety of the implanted structure mitigates the concern about induced earthquakes as a result of liquefaction wastes somatized by dams in the region, as the tilling of Mina Bonito is located practically in the hydraulic basin dam Armando Ribeiro in environmental protection (APA). The methodology compares induced by dams in the semiarid region with the characteristics of the waste disposal and sterile seismicity, taking into account the enhancement of liquefaction by the action of seismicity in the Mina Bonito region. With the fulcrum in the methodology, we indicated the best busbar type for disposal of tailings from iron ore or combination of them, to be designed and built in semiarid particularly for Mina Bonito. Also presents a number of possible uses for the tailings and in engineering activities, which may cause processing to the common good.
Resumo:
Obesity is a chronic disease that has multi-factorial aetiology, characterized by high degree of body fat; the degree of obesity will vary according to the Body Mass Index (BMI=m2 /kg). The severe degree of obesity is characterized by BMI>40 and it is regularly associated to endocrine-metabolic or mechanic clinical alterations, and to psychological disorders. Binge Eating (BE) results were overly high for this population. The Bariatric Surgery has been the treatment chosen by those diagnosed with severe obesity as this intervention provides prompt outcomes for loss of weight and clinical improvement conditions. However, recent research has acquiesced that after two years between 20% and 30% of people subject to this intervention gained weight. The main objective of this research is to assess the psychological and behavioral characteristics of those diagnosed with severe obesity that have been subject to Gastric Bypass Surgery in the past 24 months. Specific aspects were investigated: (1) characteristics of different personalities and diagnose of clinic and personality disorders; (2) BE and its relation with loss of weight; (2) the difference between the groups regarding post-surgery care, e.g. physical activity, psychological and dietician input. Method: 40 adults (women and men) aged 23 and 60 year-old who went through a bariatric surgery in the past 24 months, in the city of Natal-RN (Brazil); they were assembled in two groups n=20, Gain group displaying loss of < 50% of their initial surplus of weight, and the Loss group displaying loss of >50%. The research protocol is made of a socio-demographic questionnaire and 3 psychometric instruments: Rorschach – Comprehensive System; Millon Personality Inventory (MCMI-III); and the Binge Eating Scale (Escala de Compulsão Alimentar Periódica (ECAP). Through Rorschach significant differences between these groups were verified according to the kind of personality (EB) - more EB Extratensivo in Gain group and Intratensivo in Loss group – and the lack of control to express affect, increasing the answer for Color Pure at Group I. Concerning the people standardization, the sample as a whole tends to show psychic pain, denigrated selfperception, high levels of self-criticism, distorted perceptions, vulnerability to develop mood disorders and high scores regarding Suicide. MCMI-III results showed more clinic and personality disorders in Group I: Depressive Disorder and Schizotypal, Anxiety, Dysthymia, Major Depressive Disorder; Thought Disorder, Bipolar- Manic and Posttraumatic Stress Disorder. In relation to ECAP, the results indicated significant differences, showing increased BE results in Gain group. There were found significant differences between BE severity and the presence of clinic and personality disorders. Concerning the post-surgery care, the observed differences are statistically significant regarding physical activities with median-increased differences in Loss group. There is a difference between the initial weight and the time post-surgery, indicating that the higher the initial weight and the time after the surgery the higher the re-gain of weight post-surgery. Finally, the results show that the participants with more than 3 years of surgery will have Clinic and Major Depressive Disorders; Somatoform Disorder; Dysthymia. These results confirm prior studies related to BE post-surgery and re-gain of weight as well as the proneness of clinic disorders in severe obesity people. That means the results reinforce that the surgery process is a facet of the severe obesity treatment. The post-surgery process needs to be the main focus of attention and have a long-term input to sustain the care of the surgery results and the quality of life of the patients.
Resumo:
The present study had as goal to evaluate Rio Grande do Norte state’s medical residency programs (MRP) in Cardiology. It’s a descriptive study, including a documental analysis of the program’s accreditation processes (PAP) of cardiology’s medical residency in Rio Grande do Norte state in 2014 and the analysis of the resident’s perception about his professional education as a specialist in Cardiology. Beside the documental analysis of the PAPs, it was applied a semi-structured questionnaire with closed questions Likert style and open questions to all the current and former residents of the MRPs analyzed. Two MRPs in Cardiology were identified in Rio Grande do Norte state, one hosted in a public institution and the other in a private institution. The documental analysis showed a greater amount of preceptors with a good level of ownership on the public institution in comparison with the private one, as well as a bigger number of publications, participation in congresses and in book’s publications. The private institution presents a better Urgency’s infrastructure, with emergency room and cardiologic ICU. It IS clear that the residents are aware of how a good residency must work, as well as the strengths and fragilities of their own residences. Most of Onofre Lopes Universitary Hospital’s residents point out as a strength the organization, participation and quality of the preceptors, practice activities and scientific debates, great amount of patients and the visits and debates with the preceptors on the sickrooms. As the greatest fragilities, they emphasize the lack of a urgency service of their own and a specialized ICU. In Coração Hospital of Natal (HCor), it is listed as weak points the theoretic scheduling and the few ambulatory practices. As positive aspects, they report the preceptors, the agility on the execution of exams, a good number of serious patients and procedures. In both residences, it is seen a certain difficulty in accepting the important and mandatory items imposed by the rules of the Medical Residences’ National Committee, such as: biostatistics, bioethics, medical ethic, epidemiology and research methodology. Besides that, the residents recognize that both hospitals have a good infrastructure and technological support, especially in imaging methods. The evaluation of PRMCs identifies the strengths of each program and the aspects to be improved in both programs. It also allowed the observation of difficulties in accepting some regulations contained in the CNRM resolution by the resident, such as participation in activities such as biostatistics, epidemiology and research methodology as well as the improvement needs of specific technical training, such as in emergency care. Thus, our results make possible to develop strategies for continued improvement of PRMC in RN state. In addition, it enabled the preparation of the resident’s manual in cardiology, containing even a breakdown of resident evaluation system, which could serve as a model for other residency programs.
Resumo:
The real-time embedded systems design requires precise control of the passage of time in the computation performed by the modules and communication between them. Generally, these systems consist of several modules, each designed for a specific task and restricted communication with other modules in order to obtain the required timing. This strategy, called federated architecture, is already becoming unviable in front of the current demands of cost, required performance and quality of embedded system. To address this problem, it has been proposed the use of integrated architectures that consist of one or few circuits performing multiple tasks in parallel in a more efficient manner and with reduced costs. However, one has to ensure that the integrated architecture has temporal composability, ie the ability to design each task temporally isolated from the others in order to maintain the individual characteristics of each task. The Precision Timed Machines are an integrated architecture approach that makes use of multithreaded processors to ensure temporal composability. Thus, this work presents the implementation of a Precision Machine Timed named Hivek-RT. This processor which is a VLIW supporting Simultaneous Multithreading is capable of efficiently execute real-time tasks when compared to a traditional processor. In addition to the efficient implementation, the proposed architecture facilitates the implementation real-time tasks from a programming point of view.
Resumo:
Lung cancer is one of the most common types of cancer and has the highest mortality rate. Patient survival is highly correlated with early detection. Computed Tomography technology services the early detection of lung cancer tremendously by offering aminimally invasive medical diagnostic tool. However, the large amount of data per examination makes the interpretation difficult. This leads to omission of nodules by human radiologist. This thesis presents a development of a computer-aided diagnosis system (CADe) tool for the detection of lung nodules in Computed Tomography study. The system, called LCD-OpenPACS (Lung Cancer Detection - OpenPACS) should be integrated into the OpenPACS system and have all the requirements for use in the workflow of health facilities belonging to the SUS (Brazilian health system). The LCD-OpenPACS made use of image processing techniques (Region Growing and Watershed), feature extraction (Histogram of Gradient Oriented), dimensionality reduction (Principal Component Analysis) and classifier (Support Vector Machine). System was tested on 220 cases, totaling 296 pulmonary nodules, with sensitivity of 94.4% and 7.04 false positives per case. The total time for processing was approximately 10 minutes per case. The system has detected pulmonary nodules (solitary, juxtavascular, ground-glass opacity and juxtapleural) between 3 mm and 30 mm.
Resumo:
This study reports recommendations for a tactile and graphic wayfinding system aiming to offer more orientability and mobility for visually impaired people (blindness and low vision) at Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN), Parnamirim Campus. It was necessary to focus on visual impaired people and approach concepts like orientation and accessibility at the built environment. In order to provide the comprehension of a complex social phenomenon and preserve the meaningful characteristics of the events, this research has developed a single case study in which elements of Post Occupation Evaluation have been used. Its purpose was to allow not only a technical analysis, but also the user perception about the space in use. The chosen tool to collect the user’s opinions and considerations was the Walk Together Method. The collected and analyzed information has demonstrated that, although Parnamirim Campus has implemented some interventions in relation to the spatial accessibility, they are still not enough to create an environment which arranges safety and autonomy for the visual impaired people and the other ones who attend there. This study suggests that it happened because the engineering interventions at the Campus have been based on Brazilian technical standards NBR 9050:2004, which is proper for the physical impaired people, but it does not offer enough information to respond to all the specific needs demanded by all the classifications of visual impairment.
Resumo:
This study reports recommendations for a tactile and graphic wayfinding system aiming to offer more orientability and mobility for visually impaired people (blindness and low vision) at Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN), Parnamirim Campus. It was necessary to focus on visual impaired people and approach concepts like orientation and accessibility at the built environment. In order to provide the comprehension of a complex social phenomenon and preserve the meaningful characteristics of the events, this research has developed a single case study in which elements of Post Occupation Evaluation have been used. Its purpose was to allow not only a technical analysis, but also the user perception about the space in use. The chosen tool to collect the user’s opinions and considerations was the Walk Together Method. The collected and analyzed information has demonstrated that, although Parnamirim Campus has implemented some interventions in relation to the spatial accessibility, they are still not enough to create an environment which arranges safety and autonomy for the visual impaired people and the other ones who attend there. This study suggests that it happened because the engineering interventions at the Campus have been based on Brazilian technical standards NBR 9050:2004, which is proper for the physical impaired people, but it does not offer enough information to respond to all the specific needs demanded by all the classifications of visual impairment.
Resumo:
DNA repair systems, genes and proteins are essential for genome integrity maintenance, avoiding serious diseases such as cancer. Deregulation in the expression of those proteins has been associated with both the risk of development and evolution of various human cancers, including oral squamous cell carcinoma. The purpose of this study was to analyze the immunoreactivity of the DNA repair proteins XRCC1, THIIF and XPF in oral tongue squamous cell carcinoma (OTSCC) and to investigate its association with clinical and histopathological parameters, outcome and 5-year survival rate. Seventy-four cases of OTSCC were analyzed semi-quantitatively through immunohistochemistry. We observed that DNA repair proteins were highly expressed in parenchymal cells; however, we only observed a significant association between XRCC1 high expression and better clinical staging (p=0,02). Cox regression showed that tumor size (p<0,01), lymph node involvement (p=0,04), tumor stage (p=0,02) and depth of invasion> 4mm (p=0,05) were prognostic factors. The results of this experiment suggest that XRCC1, TFIIH and XPF participate in the tumorigenic process, however, their immunoexpression may not be used as an independent prognostic indicator for OTSCC.