Um sistema para a inferência de variáveis usando redes neurais artificiais

This work aims to obtain a low-cost virtual sensor to estimate the quality of LPG. For the acquisition of data from a distillation tower, software HYSYS ® was used to simulate chemical processes. These data will be used for training and validation of an Artificial Neural Network (ANN). This network will aim to estimate from available simulated variables such as temperature, pressure and discharge flow of a distillation tower, the mole fraction of pentane present in LPG. Thus, allowing a better control of product quality

Desenvolvimento de metodologias analíticas alternativas por cromatografia gasosa para análise de biodiesel

Since the beginning of the National Program for Production and Use of Biodiesel in Brazil, in 2004, different raw materials were evaluated for biodiesel production, trying to combine the agricultural diversity of the country to the desire to reduce production coasts. To determine the chemical composition of biodiesel produced from common vegetables oils, international methods have been used widely in Brazil. However, for analyzing biodiesel samples produced from some alternative raw materials analytical problems have been detected. That was the case of biodiesel from castor oil. Due the need to overcome these problems, new methodologies were developed using different chromatographic columns, standards and quantitative methods. The priority was simplifying the equipment configuration, realizing faster analyses, reducing the costs and facilitating the routine of biodiesel research and production laboratories. For quantifying free glycerin, the ethylene glycol was used in instead of 1,2,4-butanetriol, without loss of quality results. The ethylene glycol is a cheaper and easier standard. For methanol analyses the headspace was not used and the cost of the equipment used was lower. A detailed determination of the esters helped the deeper knowledge of the biodiesel composition. The report of the experiments and conclusions of the research that resulted in the development of alternative methods for quality control of the composition of the biodiesel produced in Brazil, a country with considerable variability of species in agriculture, are the goals of this thesis and are reported in the following pages

Nanosistemas de penicilina G benzatina para tratamento profilático da febre reumática: estudo analítico

Investigations in the field of pharmaceutical analysis and quality control of medicines require analytical procedures with good perfomance characteristics. Calibration is one of the most important steps in chemical analysis, presenting direct relation to parameters such as linearity. This work consisted in the development of a new methodology to obtain calibration curves for drug analysis: the stationary cuvette one. It was compared to the currently used methodology, and possible sources of variation between them were evaluated. The results demonstrated that the proposed technique presented similar reproducibility compared to the traditional methodology. In addition to that, some advantages were observed, such as user-friendliness, cost-effectiveness, accuracy, precision and robustness. Therefore, the stationary cuvette methodology may be considered the best choice to obtain calibration curves for drug analyis by spectrophotometry

Otimização de solução extrativa e desenvolvimento tecnológico de produto seco por aspersão de Psidium guajava L.

The increasing in the consumption of plant medicine by parts of the population generated a bigger need for studies. Drug substitutions, changes and adulterations at the production techniques are common places at plant-originated drugs trade, leading governmental departments of drug control round the world to adopt many analytical practices to medicinal plants. However, agronomic and technological issues cause characteristics and chemical composition variation at the drug, problem to be solved by the subject researchers. The present work aims to obtain a spray dried extract from a extractive solution obtained from Psidium guajava L. leaves based in book references that stress the intermediate dosage forms advantages. It also tries to validate useful methodologies for the quality control for both raw material and its derivates. Using eight sets of the spray dried extract (with Eudragit®, Aerosil ® e Avicel PH101 ® as drying adjuvants), the study proposes analytical methods using techniques commonly performed to plant medicines and its intermediate forms. As results, a viable spray-dried extract was obtained from a standartized extract solution. Among the studied adjuvants, the combination Aerosil ® with Eudragit ® showed the drying outcome, rheology, humidity and tannin content values that best fitted the demands of the Brazilian Pharmacopaea

Associação do receptor toll-like 2 com o estado pró-inflamatório do diabetes tipo 1

Inflammation has been pointed out as an important factor in development of chronic diseases, as diabetes. Hyperglycemia condition would be responsible by toll-like receptors, TLR2 and TLR4, and, consequently by local and systemic inflammation induction. Thus, the objective of present study was to evaluate type 1 Diabetes mellitus (T1DM) pro-inflammatory state through mRNA expression of TLRs 2 and 4 and proinflammatory cytokines IL-1β, IL-6 and TNF-α correlating to diabetic nephropathy. In order to achieve this objective, 76 T1DM patients and 100 normoglycemic (NG) subjects aged between 6 and 20 years were evaluated. T1DM subjects were evaluated as a total group DM1, and considering glycemic control (good glycemic control DM1G, and poor glycemic control DM1P) and considering time of diagnosis (before achieving 5 years of diagnosis DM1< 5yrs, and after achieving 5 years of diagnosis DM1 <5yrs). Metabolic control was evaluated by glucose and glycated hemoglobin concentrations; to assess renal function serum urea, creatinine, albumin, total protein and urinary albumin-to-creatinine ratio were determined and to evaluate hepatic function, AST and ALT serum activities were measured. Pro-inflammatory status was assessed by mRNA expression of TLRs 2 and 4 and the inflammatory cytokines IL-1β, IL-6 and TNF-α. Except for DM1G group (18.4%), DM1NC patients (81.6%) showed a poor glycemic control, with glycated hemoglobin (11,2%) and serum glucose (225,5 md/dL) concentrations significantly increased in relation to NG group (glucose: 76,5mg/dL and glycated hemoglobin: 6,9%). Significantly enhanced values of urea (20%) and ACR (20,8%) and diminished concentrations of albumin (5,7%) and total protein (13,6%) were found in T1DM patients, mainly associated to a poor glycemic control (DM1P increased values of urea: 20% and ACR:49%, and diminished of albumin: 13,6% and total protein:13,6%) and longer disease duration (DM1 <5yrs - increased values of urea: 20% and ACR:20,8%, and diminished of albumin: 14,3% and total protein:13,6%). As regarding pro-inflammatory status evaluation, significantly increased mRNA expressions were presented for TLR2 (37,5%), IL-1β (43%), IL-6 (44,4%) and TNF-α (15,6%) in T1DM patients in comparison to NG, mainly associated to DM1P (poor glycemic control TLR2: 82%, IL-1β: 36,8% increase) and DM1 <5yrs (longer time of diagnosis TLR2: 85,4%, IL-1β: 46,5% increased) groups. Results support the existence of an inflammatory state mediated by an increased expression of TLR2 and pro-inflammatory cytokines IL-1β, IL-6 and TNF-α in T1DM

Desenvolvimento e validação de método analítico para determinação de teor de ácido gálico e catequina no fitoterápico sanativo® por cromatografia líquida de alta eficiência

The herbal medicine Sanativo® is produced by the Pernambucano Laboratory since 1888 with indications of healing and hemostasis. It is composed of a fluid extract about Piptadenia colubrina, Schinus terebinthifolius, Cereus peruvianus and Physalis angulata. Among the plants in their composition, S. terebinthifolius and P. colubrina have in common phenolic compounds which are assigned most of its pharmacological effects. The tannins, gallic acid and catechin were selected as markers for quality control. The aim of this study was the development and validation of analytical method by HPLC/UV/DAD for the separation and simultaneous quantification of gallic acid (GAC) and catechin (CTQ) in Sanativo®. The chromatographic system was to stationary phase, C-18 RP column, 4,6 x 150 mm (5 mm) under a temperature of 35 ° C, detection at 270 and 210 nm. The mobile phase consisted of 0.05% trifluoroacetic acid and methanol in the proportions 88:12 (v/v), a flow rate of 1 ml/min. The analytical method presented a retention factor of 0.30 and 1.36, tail factor of 1.8 and 1.63 for gallic acid and catechin, respectively, resolution of 18.2, and theoretical plates above 2000. The method validation parameters met the requirements of Resolution n º 899 of May 29, 2003, ANVISA. The correlation coefficient of linear regression analysis for GAC and CTQ from the standard solution was 0.9958 and 0.9973 and when performed from the Sanativo® 0.9973 and 0.9936, the matrix does not interfere in the range 70 to 110 %. The limits of detection and quantification for GAC and CQT were 3.25 and 0.863, and 9.57 and 2.55 mg/mL, respectively. The markers, GAC and CQT, showed repetibility (coefficient of variation of 0.94 % and 2.36 %) and satisfactory recovery (100.02 ± 1.11 % and 101.32 ± 1.36 %). The method has been characterized selective and robust quantification of GAC and CTQ in the Sanativo® and was considered validated

Caracterização e quantificação de marcadores químicos do extrato hidroetanólico das folhas de Kalanchoe brasiliensis Cambess

Kalanchoe brasiliensis Cambess (Crassulaceae), commonly known as saião , coirama branca , folha grossa , is originally from Brazil and commonly found in São Paulo to Bahia, mainly in the coastal zone. Regarding of biological activities, most preclinical studies were found in the literature, mainly about the anti-inflammatory activity of extracts obtained from leaves and / or aerial parts of K. brasiliensis. As regards the chemical constitution, it has been reported mainly the presence of flavonoids in the leaves of the species, but until this moment did not knows which are the active compounds. Although it is a species widely used in traditional medicine in Brazil, there is no monograph about the quality parameters of the plant drug. In this context, this study aims to characterize and quantify the chemical markers of hydroethanolic extract (HE) from the leaves of K. brasiliensis, which can be used in quality control of plant drug and derivatives obtained from this species. The methodology was divided into two parts: i. Phytochemical study: to fractionate, isolate and characterizate of the chemical (s) marker (s) of the HE from the leaves of K. brasiliensis; ii. To Developed validate of analytical method by High Performance Liquid Chromatography (HPLC)-diode array detector (DAD) to quantify the chemical (s) marker (s) of the EH. i. The EH 50% was prepared by turbo extraction method. It was then submitted to liquid-liquid partition, obtaining dichloromethane, n-butanol and ethyl acetate (AcOEt) fractions. The AcOEt fraction was selected to continue the fractionation process, because it has a chemical profile rich in flavonoids. The acOEt fraction was submitted to column chromatography using different systems for obtaining the compound Kb1. To identify this compound, it was submitted to UV analysis ii. For quantitative analysis, the EH was analyzed by HPLC, using different methods. After selecting the most appropriate method, which showed satisfactory resolution and symmetrical peaks, it was validated according to parameters in the RE 899/2003. As result, it was obtained from the AcOEt fraction the compound Kb1 (2.7 mg). Until this moment, the basic nucleus was characterized by UV analysis using shift reagents. The partial chemical structure of the compound Kb1 was identified as a flavonol, containing hydroxyls in 3 , 4 position (ring A), 5 and 7 free (ring B) and a replacement of the C3 hydroxyl by a sugar. As the analysis were performed in the HPLC coupled to a DAD, we observed that the UV spectrum of the major peaks of EH from K. brasiliensis shown similar UV spectrum. According to the literature, it has been reported the presence of patuletin glycosydes derivatives in the leaves of this species. Therefore, it is suggested that the compound Kb1 is glycosylated patuletin derivative. Probably the sugar (s) unit(s) are linked in the C3 in the C ring. . Regarding the development of HPLC analytical method, the system used consists of phase A: water: formic acid (99,7:0,3, v / v) and phase B: methanol: formic acid (99,7:0,3, v / v), elution gradient of 40% B - 58% B in 50 minutes, ccolumn (Hichrom ®) C18 (250x4, 0 mm, 5 μm), flow rate 0.8 mL / min, UV detection at 370 nm, temperature 25 ° C. In the analysis performed with the co-injection of thecompound Kb1 + HE of K. brasiliensis was observed that it is one of the major compounds with a retention time of 12.47 minutes and had a content of 15.3% in EH of leaves from K. brasiliensis. The method proved to be linear, precise, accurate and reproducible. According to these results, it was observed that compound Kb1 can be used as a chemical marker of EH from leaves of K. brasiliensis, to assist in quality control of drug plant and its derivatives

Obtenção de insumo farmacêutico a partir das folhas de Cissampelos sympodialis Eichl e seu efeito sobre mediadores inflamatórios relevantes para a asma

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Sistema Híbrido de Inferência Baseado em Análise de Componentes Principais e Redes Neurais Artificiais Aplicado a Plantas de Processamento de Gás Natural

Nowadays, where the market competition requires products with better quality and a constant search for cost savings and a better use of raw materials, the research for more efficient control strategies becomes vital. In Natural Gas Processin Units (NGPUs), as in the most chemical processes, the quality control is accomplished through their products composition. However, the chemical composition analysis has a long measurement time, even when performed by instruments such as gas chromatographs. This fact hinders the development of control strategies to provide a better process yield. The natural gas processing is one of the most important activities in the petroleum industry. The main economic product of a NGPU is the liquefied petroleum gas (LPG). The LPG is ideally composed by propane and butane, however, in practice, its composition has some contaminants, such as ethane and pentane. In this work is proposed an inferential system using neural networks to estimate the ethane and pentane mole fractions in LPG and the propane mole fraction in residual gas. The goal is to provide the values of these estimated variables in every minute using a single multilayer neural network, making it possibly to apply inferential control techniques in order to monitor the LPG quality and to reduce the propane loss in the process. To develop this work a NGPU was simulated in HYSYS R software, composed by two distillation collumns: deethanizer and debutanizer. The inference is performed through the process variables of the PID controllers present in the instrumentation of these columns. To reduce the complexity of the inferential neural network is used the statistical technique of principal component analysis to decrease the number of network inputs, thus forming a hybrid inferential system. It is also proposed in this work a simple strategy to correct the inferential system in real-time, based on measurements of the chromatographs which may exist in process under study

A engenharia simultânea e o perfil da indústria de confecção da grande Natal/RN utilizando as ferramentas CAD/PDM e ERP

This work presents the research carried through in the industrial segment of confection of clothes of the Great Natal whose objective is to show the profile, enterprise and technological management as also the use of simultaneous engineering in the development of products. The research approaches two studies. The first one presents the current picture of the companies, synthesized through twelve variable. As, through fifteen variable it shows to the level of use of Simultaneous Engineering in the Development of Products and its amplitude in relation to the Integrated Management using tools CAD, PDM and ERP (Computer Aided Design, Product Management Date, Enterprise Resource Planning). The integration of these systems acts aiming the reduction of the cost and the development time of products. The reached results indicate that simultaneous engineering is a competitive advantage and becomes possible: to reduce the life cycle of the product, to rationalize the resources, to incorporate one high standard of the quality to the process and product as well as to personalize the product to take care of the global market. It is important to note that this work also is considered to contribute for the better understanding of the real companies situation of confection located at the Great Natal and its role in the economy of the State of the Rio Grande do Norte

Desenvolvimento de um núcleo versátil e integrado de ferramentas CAD/CAE para a modelagem e simulação de peças mecânicas

Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented

Estudo termoanalítico de medicamentos de referência, genérico e similar

This study aimed to apply, thermogravimetriy /derivative Thermogravimetriy (TG/DTG), differential scanning calorimetry (DSC), Differential Thermal Analysis (DTA), to conduct a comparative study on drug reference, generic and whose active principles are similar captopril hydrochlorothiazide, ampicillin, paracetamol, aspirin and mebendazole sold in local pharmacies. Samples of the active ingredients and dosage forms were also characterized by absorption infrared spectroscopy (IR), X-ray diffraction (XRD) and microscopy scanning electron (SEM). The TG / DTG curves showed a general similarity in the thermal behavior of the samples, but also showed the influence of excipients on the thermal stability. The DSC curve of the generic base hydrochlorothiazide showed no peak on the fusion of the drug due to interference of lactose as a diluent, which causes interaction with the active principle causing their degradation before the merger. The DSC curves of the drugs consisting of paracetamol showed reproducibility at the melting point of the active and the other thermal events. The DSC result of binary mixtures involving captopril / magnesium stearate and mebendazole/magnesium stearate showed possible interactions or incompatibilities evidenced by the displacement of the melting point of both drugs. The other mixtures showed no change. The infrared spectra presented were very similar, indicating the presence of functional groups characteristic of the constituents of the samples. The X-ray diffraction showed peaks indicative of crystalline structure of the active ingredients as well as some of the ingredients in the formulation of the drug and the micrographs indicate a general heterogeneity in the size distribution of particles in the samples

Beta: uma ferramenta para geração de testes de unidade a partir de especificações B

Formal methods and software testing are tools to obtain and control software quality. When used together, they provide mechanisms for software specification, verification and error detection. Even though formal methods allow software to be mathematically verified, they are not enough to assure that a system is free of faults, thus, software testing techniques are necessary to complement the process of verification and validation of a system. Model Based Testing techniques allow tests to be generated from other software artifacts such as specifications and abstract models. Using formal specifications as basis for test creation, we can generate better quality tests, because these specifications are usually precise and free of ambiguity. Fernanda Souza (2009) proposed a method to define test cases from B Method specifications. This method used information from the machine s invariant and the operation s precondition to define positive and negative test cases for an operation, using equivalent class partitioning and boundary value analysis based techniques. However, the method proposed in 2009 was not automated and had conceptual deficiencies like, for instance, it did not fit in a well defined coverage criteria classification. We started our work with a case study that applied the method in an example of B specification from the industry. Based in this case study we ve obtained subsidies to improve it. In our work we evolved the proposed method, rewriting it and adding characteristics to make it compatible with a test classification used by the community. We also improved the method to support specifications structured in different components, to use information from the operation s behavior on the test case generation process and to use new coverage criterias. Besides, we have implemented a tool to automate the method and we have submitted it to more complex case studies

Efeito agudo do exercício aeróbio vigoroso sobre as funções executivas em adolescentes

Executive functions are determinant cognitive processes for student success, since they execute and control complex cognitive activities such as reasoning, planning and solving problems. The development of the executive functions performances begin early at childhood going through the adolescence until adulthood, concomitant with the neuroanatomical, functional and blood perfusion changes over the brain. In this scenario, exercise has been considered an important environmental factor for neurodevelopment, as well as for the promotion of cognitive and brain health. However, there are no large scientific studies investigating the effects of a single vigorous aerobic exercise session on executive functions in adolescents. Objective: To verify the acute effect of vigorous aerobic exercise on executive functions in adolescents. Methods: A randomized controlled trial (RCT) with crossover design was used. 20 pubescent from both sexes/gender with age between 10 and 16 years were submitted to two sessions of 30min each: 1) The aerobic exercise session intensity was between 65 and 75% of heart rate reserve, in which 5min for warm-up, 20min at the target intensity and 5min of cool down; and 2) control session watching cartoons. The computerized Stroop test – Testinpacs and trail making test were used to evaluate the inhibitory control and cognitive flexibility assessment respectively, before and after both experimental and control sessions. The reaction time (RT) and number of errors (n) of Stroop test were recorded. The total time (TT) and the number of errors (n) of the trail making test were also recorded. Results: The control session’s RT did not present significant differences in the Stroop test. On the other hand, the exercise session’s RT decreased significantly (p<0.01) after the session. The number of errors made at the Stroop test had no significant differences in control and exercise sessions. The ΔTT of trail making test of exercise session was significantly (p<0.001) lower than the control session’s. Errors made in trail making test did not show significant differences between control and exercise sessions. Additionally, there was significant and positive association among the Stroop test ΔRT of exercise session with xiii chronological age (r= 0.635, p=0.001; r 2 = 0.404, p=0.003) and sexual maturation (rs= 0.580, p=0.007; r 2 = 0.408, p=0.002). Differently, there was no association among the control session ΔRT and chronological age (r= – 0.144, p=0.273; r 2 = 0.021, p=0.545) or sexual maturation (rs= –0.155, p=0.513; r 2 = 0.015, p=0.610). Conclusion: Vigorous aerobic exercise seems to improve acutely executive functions in adolescents. The effect of exercise on inhibitory control performance was associated to pubertal stage and chronological age. In other words, the benefits of exercise were more evident in early adolescence (↑ ΔRT) and its magnitude decreases along the growing up process.

Direitos fundamentais sociais no Brasil: desafios e mecanismos para sua concretização

The work referred to above, in order to contribute to the legal issues, economic, political and social of the violation of social rights, performs even firmer approach to various implementation mechanisms of social rights in Brazil. Therefore, it begins the study dealing with aspects and important characters of the rights under discussion, as its normative forecast, concept, classifications; respect of social rights with the existential minimum; the principle of reservation of the possible and the need to use this principle as optimization commandment of state resources and the deficit of the realization of social rights in the country. This, in later chapters, in an interdisciplinary approach, challenges and proposals for the realization of social rights by bringing in each chapter, mechanisms for such implementation. That way, as a general objective, it has been to contribute to the discussed problems, when present proposals for the realization of social rights in the Brazilian context. As specific objectives, as well as record the key aspects of the rights in allusion, the one has to promote the perspective of economic development and taxation as posts instruments that the State must be focused on the promotion of social rights by registering in this context that nonexistent economic development without reducing poverty, misery and social inequality and adding that there should be a directly proportional relationship between the tax burden in the country and the human and social development index; analyze the achievement of budget control as essential and healthy measure for the realization of social rights; highlight the importance of society to the achievement of unavailable social interests, affirming the need for the implementation of participatory democracy and, in this line, brings knowledge of the Constitution and the constitutional sense as elements that provide the constitutional progress. Finally, it presents a study on public policies, considering that these are equivalent to the primary means of the promotion of social rights. That way it analyzes the stages that integrate public policies, ranging from the perception of social problems for evaluation and control of the policies implemented; debate about the administrative discretion in when it comes to public policies; brings the classification of essential public policies, the relationship of these with the existential minimum, control parameters and, finally, the legalization of public policy, regarded as legitimate to remedy the unconstitutional state failure and give normative effectiveness and strength to the defining constitutional rules for fundamental social rights. It uses to achieve the objectives outlined, the bibliographic and normative approach method and performs an analysis of jurisprudence related understandings to matter. In the conclusions, it rescues the most important aspects elucidated at work, with the aim of giving emphasis to the proposals and mechanisms that contribute to the solution of the discussed problems.