48 resultados para solda odontológica
Resumo:
The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology
Resumo:
Universidade Estadual do Rio Grande do Norte
Resumo:
Posture is one of the most worrying problems dentists face. That is because of the high incidence of low back pathologies regarding the professional activity, despite the development on the field of Dental Ergonomics. This work took place at the dental schoolclinic at a Federal University, and it was grounded on the Ergonomic Principles in the workplace. Its main objective was to analyze the determinants of inadequate posture adopted by students inasmuch as the adoption of non ergonomic methods at the school-clinic may influence them to develop inadequate postures in their working environment. The analysis of the activity showed us that it requires some complex procedures in the patient s mouth. Thus, when the students carry out the activity, they start to adopt, although unconsciously, inadequate postures which will make easier the visual accuracy and the access to the operation focus. In case there is no internal (body awareness) or external warning mechanisms (the professor s or the partner s counseling) regarding posture or possible risks which lead them to self-correction, the students become vulnerable to osteomuscle disorders. The time pressure, because the students are expected to perform their task in a predetermined clinical time. The facts related to each patient s variability as well as the stress caused by the expectations to get their work done in time make the students to advance it believing they will waste time if they help their partners or using an indirect view. We could also notice that there was no assistant to perform the job of minor ones, as well as there was no professor who could actually connect the knowledge on Ergonomics to its working practice. The conclusions of this work stand out the need of widen the discussion at the academic environment regarding health professionals in places such as universities. The ergonomic principles in the workplace aim a multidisciplinary analysis based on the experience of students, professors, staff members and janitors that can contribute to some reflection upon the issue and consequently actions which will bring positive changes at the working environment
Resumo:
Metal ceramic restorations matches aesthetic and strength, and in your making occurs an interface oxide layer, wetting resulting and atomic and ionic interactions resulting between metal, oxide and porcelain. However, frequent clinical fails occurs in this restoration type, because lost homogeneous deposition oxide layer and lost interface bond. Thus, in this study, thought depositate homogeneous oxide films above Ni-Cr samples surfaces polite previously, at plasma oxide environment. Six samples was oxided at 300 and 400ºC at one hour, and two samples was oxided in a comum chamber at 900ºC, and then were characterized: optical microscopic, electronic microscopic, micro hardness, and X ray difratometry. Colors stripes were observed at six samples plasma oxided and a grey surface those comum oxided, thus like: hardness increase, and several oxides from basic metals (Ni-Cr)
Resumo:
In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay
Resumo:
To obtain a process stability and a quality weld bead it is necessary an adequate parameters set: base current and time, pulse current and pulse time, because these influence the mode of metal transfer and the weld quality in the MIG-P, sometimes requiring special sources with synergistic modes with external control for this stability. This work aims to analyze and compare the effects of pulse parameters and droplet size in arc stability in MIG-P, four packets of pulse parameters were analysed: Ip = 160 A, tp = 5.7 ms; Ip = 300 A and tp = 2 ms, Ip = 350 A, tp = 1.2 ms and Ip = 350 A, tp = 0.8 ms. Each was analyzed with three different drop diameters: drop with the same diameter of the wire electrode; droplet diameter larger drop smaller than the diameter of the wire electrode. For purposes of comparison the same was determined relation between the average current and welding speed was determined generating a constant (Im / Vs = K) for all parameters. Welding in flat plate by simple deposition for the MIG-P with a distance beak contact number (DBCP) constant was perfomed subsequently making up welding in flat plate by simple deposition with an inclination of 10 degrees to vary the DBCP, where by assessment on how the MIG-P behaved in such a situation was possible, in addition to evaluating the MIG-P with adaptive control, in order to maintain a constant arc stability. Also high speed recording synchronized with acquiring current x voltage (oscillogram) was executed for better interpretation of the transfer mechanism and better evaluation in regard to the study of the stability of the process. It is concluded that parameters 3 and 4 exhibited greater versatility; diameters drop equal to or slightly less than the diameter of the wire exhibited better stability due to their higher frequency of detachment, and the detachment of the drop base does not harm the maintenance the height of the arc
Resumo:
For a complete comprehension of the effect of tooth loss is necessary to listen to the patients that have it. This study, of qualitative approach, investigate, in the dental history of users of SUS, listening to his/her experiences with the services of dental care, the reason that lead his/her to dental lost and the repercussion of this in his/her life. The collect of data was made by narrative interview, obeying to a pre-defined schema. The subjects interviewed were six (three of urban zone and three of rural zone), all of them were users of Family Health Units. The criterions of inclusion were the followings: the presence of tooth lost (total lost in both dental arch or in one of them, or partial lost in at least six elements in one of the arches); age between 25 and 59; male or female; to live in municipal district of São Tomé/RN or Natal/RN. Based on previous interviews was elaborated the odontological history of each patient. Such narratives, systemized in odontological history, were analyzed taking as base the studies of Souza71 and the proposal of Schutze, suggested for Jovchelovitch, Bauer34. The results show that toothache was the main reason for the search of odontological care. The patients confront the ache with home-made medicaments, allopathic ones, and searching for dental care. The searching for exodontics was stimulated for geographic access difficulties or for repressed demand, which as a result produced the aggravation of the lesions and the discredit in restoration s treatment. The self-care practice of tooth-brush with juá or toothpaste and the controlled ingestion of sugar was not sufficient to avoid dental lost. Guilty sentiments were identified in relation with lack of care with teeth. The acceptance of dental lost as a natural factor is an important motivation in lack of pain and in the belief that it was a simple part of life in old age. Life with dental prosthesis makes clear the difference between which was natural and which was unnatural, and difficulties with the prosthesis appeared. The limitation of the prosthesis in its functional aspect can be compensated by esthetic restitution, making possible smiling expression. Starting with this study and considering the high number of dental lost, mainly in low-rent population, which live with toothless limitations or bad-quality prosthesis which do not rehabilitate adequately, we suggested the realization of qualitative researches which include, also, another actors in heath care services such as professionals and administrators
Resumo:
Family Health Strategy (FHS), founded in 1994 has appeared to play a strategic role in the SUS construction and consolidation. It has reaffirmed its Principles and Guidelines and has elected family as core of attention. The principle that has guided the work concerns the quality of the relationship between professional and family. Thus, the FHS has the family as a subject of health-disease process, and relations with its own characteristics and can be partners in building their health and improvement of quality of life of its members and the entire community. This study aims to characterize the surgeon-dentist (SD) working process in the family health strategy, from the knowledge of the SD integration with other team members; organization of services; development of shares, changes perceived by SDs, as well as knowing the surgeon-dentist profile who is part of this strategy. The collecting tool used was a semi-structured questionnaire, in which participated 30 professionals. As for profile, most professionals were women, completed the graduation in public university and did not have any training to work by joining the FHS. Almost all have other public or private working ties. They often carry out activities with students, and occasionally do home visits. In relation to team work, in activities such as home visits, school health, community activities, among others, they sometimes seek the cooperation of other members. The way of accessing for users in the most part has occurred through the schedule. The most frequently activities made to the Centro Especialidades Odontológicas (CEO), are in Endodontics and Prosthesis. The majority of them participate in team meetings, but they do not have frequency set to happen. As for the planning and programming of activities to be conducted, most said that individually develops them. Concerning the performance of their duties, most reported being satisfied, but that improvements could happen. Besides, they reported improvements in dental care following the inclusion of SD in the FHS in various aspects, such as access, organization, humanization, care and oral disease prevention. The professionals had poor integration with other team members, in addition to have a profile to more individualistic work, a fact seized by way of development and planning of actions. They work the actions in individual and curative way, in detriment promotion and collective ones. They work humanization, definition of territory and adscript population. Thus, it is concluded that the working process developed by SDs, includes the part which is advocated by FHS. This points out to a greater undertaking of this process aiming to detect the weakness met in order to reach the potential that the FHS represents in organization of basic attention
Resumo:
Oral health measures directed to children are characterized by the lack of policies that consider the individual and his biopsychosocial aspects. As a consequence, it can be observed that a child´s dental experience has normally been prejudged as unpleasant and threatening. Thus, this study is aimed at investigating dental treatment from the child´s viewpoint using the theory of social representations for theoretical/methodological support. This theory was selected for being able to build practical knowledge surrounding the interrelations between social actors, the phenomenon and the world around them. The investigation was performed at the Professor José Fernandes Machado State School, located in the Ponta Negra district of Natal-RN-Brazil. The participants consisted of 30 children from the public elementary school system in the 6-10 year age group, who had undergone dental treatment within the previous year or were being treated at the time of data collection. An in-depth interview and story drawing within a theme were used as collection instruments. Thematic Content Analysis (Bardin, 2002) was used to analyze the material collected in the interviews, whereas for story drawing within a theme, in addition to content analysis, the data were also analyzed by the Coutinho model (2001). The two instruments demonstrated similarity of content as well as complementarity and contained categories associated to the model for dental treatment in children, the description of the dental office environment., the perception of the image of the dentist, as well as psychological and behavioral manifestations. The results enable us to understand determinate reactions of the children in relation to dental treatment, which has been characterized by its technical-curative approach, where the motive for seeking treatment, the manner in which it is performed and the relation of the dentist with the child are all in evidence. Thus, this study intends not only to reveal the viewpoint of children faced with dental treatment, but also to contribute to a dental practice directed towards them, in this way instilling in the professionals who attend them a more concrete awareness of the needs, anxieties and feelings of these young patients
Resumo:
Brazil has been undergoing major demographic change.According to IBGE, the next 20 years the country's elderly population may reach over 30 million people. This tariff provides specifics regarding the process of health / disease. It is essential that higher education institutions are committed to this demand in view of the integrated training of health needs of society. The aim of this study is to analyze the Pedagogical Political Projects (PPP) of courses in dentistry in Rio Grande do Norte (RN), according to the national curriculum guidelines (DCNS) and training from the perspective of health care for the elderly. This is an exploratory study with a qualitative approach: with records and interviews. The study subjects were an Assistant Professor in the development of PPPs for each institution. The scenario in this study were dental training institutions in the newborns. Initially, the analysis of the PPP was by using the Alceste 4.9 software. The interpretation of the contents of interviews with teachers was done through content analysis of Bardin (2010). The PPPs are based on the DCNS, meet the characteristics of regional and seek a generalist, but still strongly directed to technical and scientific aspects of professional practice. Efforts and institutional approaches, involving teachers and students of the courses are being mobilized for training with more articulated network of health services. However, the emphasis on content pertaining to the health care of the elderly, is still limited when compared to those targeted content inherent in children and adolescents in all three curricular structures. It is reasonable to conclude that the historical, political, scientific, cultural and social, present in society, influence the formation of the dental professional RN. The greater participation of society in the process of vocational training in dentistry is needed. This can be done from the involvement of universities with health councils, bodies representing the dental profession and other segments of civil society in order to induce changes that generate ideas and educational practices integrative and interdisciplinary, with emphasis on continuing education for teachers, servants, employees and students. Containing conduct this process inherent flexibility of curriculum, teaching-service integration and coordination abilities and professional skills that are essential to understanding the human being and its complexities
Resumo:
Bioethics studies human behavior in the fields ofbiological sciences and health care. Tt strives for humanization in health services along with promoting the rights of patients. In view of the lack of dental research dealing with this topic, the present study was undertaken to identify, from the viewpoint of dental surgeons, ethical problems experienced in dental practice,understand how they occur and how professionals deal with them. It is a descriptive exploratory investigation within a qualitative approach. Empirical material was collected through semi-structured interviews performed with 15 dental surgeons who work both in private and public practice in the state of Rio Grande do Norte, Brazil. The content of the interviews was systemized and organized, resulting in the identification of topics, from which were grouped the ethical problems reported by the participants. The resu1ts indicate that many of the ethical problems coincide with infringements of the norms and mIes of the Dental Code of Ethics, confirming a dental ethic acquired during professional formation and therefore, inadequate for solving the problems that emerge in professional practice. Other questions stand out such as low salaries, competition and poor working conditions. Associated to these problems are lack of commitment and professional responsibility with the patients. Concem with maintaining user autonomy, guaranteeing access to specialized services, and the need for performing only procedures for which they are technically qualified arise in the responses, leading to difficulties in consolidating the principIes proclaimed by bioethics: autonomy, justice, nonmaleficence and beneficence. We concluded that the ethical problems identified in professional practice need to be understood beyond the dental dimension, towards a human approach. It is therefore necessary to incorporate health care management technologies into health practices, including dentistry, which implies recognizing the difTerent dimensions that surround individuaIs, that is, social, economic, political and cultural
Resumo:
The aim of this study was to assess the impact of the Family Health Program (FHP) on a number of oral health indicators in the population of Natal, Brazil. The study is characterized as a quasi-random community intervention trial. The intervention is represented by the implementation of an Oral Health Team (OHT) in the FHP prior to the study. A total of 15 sectors covered by the FHP with OHT were randomly drawn and paired with another 15 sectors, based on socioeconomic criteria, not covered by the teams. A few sectors were lost over the course of the study, resulting in a final number of 22 sectors, 11 covered and 11 not covered. We divided the non-covered areas into two conditions, one in which we considered areas that had some type of assistance program such as the Community Agents Program (CAP), FHP without OHT, BHU (Basic Health Unit) or no assistance, and the other, in which we considered areas that had only BHU or no assistance. Community Health Agents (CHAs) and Dental Office Assistants (DOAs) applied a questionnaire-interview to the most qualified individual of the household and the data obtained per household were transformed into the individual data of 7186 persons. The results show no statistical difference between the oral health outcomes analyzed in the areas covered by OHT in the FHP and in non-covered areas that have some type of assistance program, with a number of indicators showing better conditions in the non-covered areas. When we considered the association between covered and non-covered areas under the second condition, we found a statistical difference in the coverage indicators. Better conditions were found in covered areas for indicators such as I have not been to the dentist in the last year with p < 0.001 and OR of 1.64 and I had no access to dental care with p < 0.001 and OR of 2.22. However, the results show no impact of FHP with OHT on preventive action indicators under both non-covered conditions. This can be clearly seen when we analyze the toothache variable, which showed no significant difference between covered and non-covered areas. This variable is one of the most sensitive when assessing oral health programs, with p of 0.430 under condition 1 and p of 0.038 under condition 2, with CI = 0.70-0.90. In the analysis of health indicators in children where the proportion of deaths in children under age 1, the rate of hospitalization for ARI (Acute Respiratory Infections) in those under age 5 and the proportion of individuals born underweight were considered, a better condition was found in all the outcomes for areas with FHP. Therefore, we can conclude that oral health in the FHP has little effect on oral health indicators, even though the strategy improves the general health conditions of the population, as, for example child health
Resumo:
There is a lack of clinical studies evaluating techniques of functional impression for partially edentulous arches. The aim of this double-blind non-randomized controlled clinical trial was to compare the efficacy of altered cast impression (ACI) and direct functional impression (DFI) techniques. The efficacy was evaluated regarding the number of occlusal units on denture teeth, mucosa integrity at 24-hour follow-up and denture base extension. The sample included 51 patients (female and male) with mean age of 58.96 years treated at Dental Department of UFRN. The patients, exhibiting edentulous maxilla and mandibular Kennedy class I, were divided into two groups (group ACI, n=29; group DFI, n=22). Clinical evaluation was based on the number of occlusal units on natural and/or artificial teeth, mucosa integrity at 24-hour follow-up, and denture base extension. Statistical analysis was conducted using the software SPSS 17.0® (SPSS Inc., Chicago, Illinois). Student T-test was used to reveal association between number of occlusal units and impression technique while chi-square test showed association between mucosa integrity and impression technique. Fischer s exact test was applied for association between denture base extension and impression technique at 95% level of significance. No significant difference was observed between the groups regarding number of occlusal units, mucosa integrity and denture base extension. The altered cast technique did not provide significant improvement in comparison to the direct technique when the number of occlusal units, mucosa integrity and denture base extension
Resumo:
Despite the improvement of Brazilian s living conditions in recent decades, this improvement occurred in a polarized way between groups of better social position. Then, there is still a health inequity´s panorama in Brazil which encompasses the oral health state. This panorama instigated the attainment of this ecological study that aimed to evaluate the relationship of socioeconomic conditions, and public health policies with oral health status in Brazilian capitals. Thus, we performed factor analysis and linear regression using oral health indicators collected from SB Brasil 2010, of socioeconomic conditions from Brazilian Census 2010 and related to water´s supply fluoridation from SISAGUA. Factor analysis with indicators of living conditions revealed two common factors, economic deprivation and socio-sanitary condition. Economic deprivation showed statistically significant positive correlation with DMFT 12 years (p= 0,03) and mean missing teeth (p = 0,002) and negative correlation with caries-free population (p=0,012). Socio-sanitary negatively correlated with DMFT (p <0,0001) and a positive correlation with caries-free population (p = 0.002). Fluoridated water had a significant association with DMFT (p <0,0001), mean missing teeth (p <0,0001) and caries free population (p <0.0001). Multiple linear regression analysis for the DMFT of capital was estimated by socio-sanitary condition and fluoridation, adjusted by economic deprivation, whereas the model for the mean missing teeth was estimated only by fluoridation and economic deprivation, and finally the model the rate for the population free of caries in Brazilian capitals was estimated by economic and socio-sanitary status adjusted fluoridated water supply. Therefore, factors related to living conditions and public policies are intrinsically linked to tooth decay issues. Thus, actions, beyond dental care assistance, must be development to impact positively in social and economic conditions, especially, between the most vulnerable populations
Resumo:
The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software