Estudo paramétrico do processo de injeção de solventes em poços horizontais para reservatórios de óleos pesados

The world has many types of oil that have a range of values of density and viscosity, these are characteristics to identify whether an oil is light, heavy or even ultraheavy. The occurrence of heavy oil has increased significantly and pointing to a need for greater investment in the exploitation of deposits and therefore new methods to recover that oil. There are economic forecasts that by 2025, the heavy oil will be the main source of fossil energy in the world. One such method is the use of solvent vaporized VAPEX which is known as a recovery method which consists of two horizontal wells parallel to each other, with a gun and another producer, which uses as an injection solvent that is vaporized in order to reduce the viscosity of oil or bitumen, facilitating the flow to the producing well. This method was proposed by Dr. Roger Butler, in 1991. The importance of this study is to analyze how the influence some operational reservoir and parameters are important in the process VAPEX, such as accumulation of oil produced in the recovery factor in flow injection and production rate. Parameters such as flow injection, spacing between wells, type of solvent to be injected, vertical permeability and oil viscosity were addressed in this study. The results showed that the oil viscosity is the parameter that showed statistically significant influence, then the choice of Heptane solvent to be injected showed a greater recovery of oil compared to other solvents chosen, considering the spacing between the wells was shown that for a greater distance between the wells to produce more oil

Estudo comparativo da injeção de água usando poços verticais e horizontais

Oil recovery using waterflooding has been until now the worldwide most applied method, specially for light oil recovery, its success is mainly because of the low costs involved and the facilities of the injection process. The Toe- To-Heel Waterflooding TTHWTM method uses a well pattern of vertical injector wells completed at the bottom of the reservoir and horizontal producer wells completed at the top of it. The main producing mechanism is gravitational segregation in short distance. This method has been studied since the early 90´s and it had been applied in Canada with positive results for light heavy oils, nevertheless it hasn´t been used in Brazil yet. In order to verify the applicability of the process in Brazil, a simulation study for light oil was performed using Brazilian northwest reservoirs characteristics. The simulations were fulfilled using the STARS module of the Computer Modelling Group Software, used to perform improved oil recovery studies. The results obtained in this research showed that the TTHWTM well pattern presented a light improvement in terms of recovery factor when compared to the conventional 5- Spot pattern, however, it showed lower results in the economic evaluation

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Análise paramétrica da injeção de vapor e solvente em reservatórios de óleo pesado

A significant fraction of the hydrocarbon reserves in the world is formed by heavy oils. From the thermal methods used to recovery these resources, Steamflooding has been one of the main economically viable alternatives. In Brazil, this technology is widely used by Petrobras in Northeast fields. Latent heat carried by steam heats the oil in the reservoir, reducing its viscosity and facilitating the production. In the last years, an alternative more and more used by the oil industry to increase the efficiency of this mechanism has been the addition of solvents. When co-injected with steam, the vaporized solvent condenses in the cooler regions of the reservoir and mixes with the oil, creating a low viscosity zone between the steam and the heavy oil. The mobility of the displaced fluid is then improved, resulting in an increase of oil recovery. To better understand this improved oil recovery method and investigate its applicability in reservoirs with properties similar to those found in Potiguar Basin, a numerical study was done to analyze the influence of some operational parameters (steam injection rate, injected solvent volume and solvent type) on oil recovery. Simulations were performed in STARS ("Steam, Thermal, and Advanced Processes Reservoir Simulator"), a CMG ("Computer Modelling Group") program, version 2009.10. It was found that solvents addition to the injected steam not only anticipated the heated oil bank arrival to the producer well, but also increased the oil recovery. Lower cold water equivalent volumes were required to achieve the same oil recoveries from the models that injected only steam. Furthermore, much of the injected solvent was produced with the oil from the reservoir

Avaliação do potencial de formigas (Hymenoptera: formicidae) como vetores mecânicos de bactérias do gêneroSstaphylococcus no ambiente hospitalar.

In a hospital environment, these bacteria can be spread by insects such as ants, which are characterized by high adaptability to the urban environment. Staphylococcus is a leading cause of hospital infection. In Europe, Latin America, USA and Canada, the group of coagulase negative staphylococci (CoNS) is the second leading cause of these infections, according to SENTRY (antimicrobial surveillance program- EUA). In this study, we investigated the potential of ants (Hymenoptera: Formicidae) as vehicle mechanics of Staphylococcus bacteria in a public hospital, in Natal-RN. The ants were collected, day and night, from June 2007 to may 2008, in the following sectors: hospitals, laundry, kitchen, blood bank. The ants were identified according to the identification key of Bolton, 1997. For the analysis of staphylococci, the ants were incubated in broth Tryptic Soy Broth (TSB) for 24 hours at 35 º C and then incubated on Mannitol Salt Agar. The typical colonies of staphylococci incubated for 24 hours at 35 ° C in Tryptic Soy Agar for the characterization tests (Gram stain, catalase, susceptibility to bacitracin and free coagulase). The identification of CoNS was performed through biochemical tests: susceptibility to novobiocin, growth under anaerobic conditions, presence of urease, the ornithine decarboxylation and acid production from the sugars mannose, maltose, trehalose, mannitol and xylose. The antimicrobial susceptibility examined by disk-diffusion technique. The technique of Polymerase Chain Reaction was used to confirm the presence of mecA gene and the ability to produce biofilm was verified by testing in vitro using polystyrene inert surface, in samples of resistant staphylococci. Among 440 ants, 85 (19.1%) were carrying coagulase-negative staphylococci (CoNS) of the species Staphylococcus saprophyticus (17), Staphylococcus epidermidis (15), Staphylococcus xylosus (13), Staphylococcus hominis hominis (10), Staphylococcus lugdunensis (10), Staphylococcus warneri (6), Staphylococcus cohnii urealyticum (5), Staphylococcus haemolyticus (3), Staphylococcus simulans (3), Staphylococcus cohnii cohnii (2), and Staphylococcus capitis (1). No Staphylococcus aureus was found. Among the isolates, 30.58% showed resistance to erythromycin. Two samples of CoNS (2.35%), obtained from the ant Tapinoma melanocephalum collected in the post-surgical female ward, S. Hominis hominis and S. lugdunensis harbored the mecA gene and were resistant to multiple antibiotics, and the specie S. hominis hominis even showed to be a biofilm producer. This study proves that ants act as carriers of multidrug-resistant coagulase-negative Staphylococci and biofilm producers and points to the risk of the spreading of pathogenic microorganisms by this insect in the hospital environment

Batidas intensas : corpo e sociabilidade nas festas de música eletrônica em Natal

The significance of the body in electronic music parties as a sign for communicating and socializing among participants is the focus of this work. Qualitative research undertaken in this study seeks to investigate how sociability happens at raves and nightclubs in Natal/RN. Sociability is understood here as a play expression involving the dimensions of music, dance and party; the body, seen from a transdisciplinary approach, is understood as a symbolic instance, with its own meanings, as a result and a producer of social and as a cross between the cultural and the biological. The body has a communicative potential, is primary media. An intersection point between nature and culture, it serves as the seat of emotions and sociability, since it is through it that social relations are made. In electronic music parties, the body is interpreted based on its communication signs: clothing, accessories, body movements, tactile contact, body language, interactions between the public and dj, the dj and the public, gestures, expressive speech of emotions. Through such signs, body communication and a sense of community among participants develop sociability in the festive place and change the mood of the dancers. The Natal s electronic music parties young goer interacts on parties, adopts cheerful and receptive positions towards the other, maintains physical contact, values dance as a form of communication and lists happiness as the main feeling aroused in electronic music festivals. To achieve this result, a plurimetodological approach was used, which consisted of various methodological devices and various techniques of investigation: ethnographic observation, individual and informal interview techniques, photographic record of the scene, in-depth interview and application thirty questionnaires to patrons of electronic music parties

Break: o grito corporal da periferia

In order to question a sociology as it considers appropriate the body dimensions, which contributes in a mean singular in relation to body, not only as a matter, but mainly as a producer of knowledge, our research shows a reflection on corporality as the production of knowledge and to understand different perspectives and social logic here in contemporaneity, whose rationality seems to be placed in question through a performance expressed, a lot of 'breaks', including the space, which the dancer break appropriates of a reversed form and not more than linear. Our problem is the possibility of a greater understanding of this young body with dance the break, is not only 'breaking' his body, but fluent in their own body fragments, producing probably a break in relation to a dominant power established, by creating a kind of 'social resistance' to provide another sense for his life, out of the senses by the dominant of a social field. This is the area of production of knowledge, of the 'body' that cries keep our eyes, the challenge of dive in the depth of gestures, beyond the physical structure, restoring in a strong political constitution and cultural in so far as this body faces. The body as spectacular becomes 'cause and effect' of communication, this body is not only individual, it is not expression only for itself; when the young dance outside their walls individuals, makes it relational, turning to relate with the other, with the space, time and the world. The methodological point of view, to study this corporality in element break, the body as language of senses, we considered withdrawals in the field, observations of movements of the universe of break creative dance, performance and analysis of "attitudes" (expression peculiar world hip hop ), as well as my experience with dancing in the street interventions through 'urban' and our own attitudes to the object of research which challenges us academically and, it all, existentially

Geração de renda e ocupações na cadeia agroindustrial de castanha de caju no Rio Grande do Norte: o caso do sertão de Apodi

This work is part of the research group studying agribusiness chains, by characterizing agroindustrial chain of cashew nuts in Rio Grande do Norte, with special emphasis on Sertão de Apodi Citizenship Territory, showing their different flows and linkages and analyzes generating jobs and income in the production of this good, from the experience of COOPAPI, using as a methodology for analyzing the input-output matrix. And this is justified by the fact that Brazil is in the context as the world's fifth largest producer of cashew nuts and the production of this product focus in the Northeast, especially the Rio Grande do Norte, which is the second largest producer of region, behind only the state of Ceará, which is the largest producer in the country. Moreover, in recent years the state has increased its insertion in international markets this product, particularly the Mossoró-Assu Territory, which constitutes the largest producer in the state, particularly the municipality of Serra do Mel, which has an arrangement different yield, based on the model of integrated rural development, embodied in family farming. Nevertheless, the Sertão de Apodi Citizenship appear as the fourth among the Citizenship territories of Rio Grande do Norte in the ranking of the production of cashew nuts, but the prevailing model of Cooperatives in the Territory, based on the Solidarity Economy, i,e, different from the old cooperative, which is based on the precepts as patronage, with cooperative owners, favor, etc.., encourages scientific research. In this, after a careful analysis of data from field research, it was noticed that among the links in the chain, the production link is what generates the most jobs, while the processing link commands to generate income, but a portion meaningful occupations and income are generated outside the territory, especially out of state RN, denouncing the gap in supply of some specific demands within the chain

Gêneros do discurso e escrita: o que as coleções didáticas de português (des)prestigiam no ensino da produção textual?

Through the examination of official indicators, it can be observed that writing is pointed out as one of the main problems concerning formal basic education. However, this teaching-learning object is one of the central objectives at school, having an essential role in different curricular components as well as in the interaction demands required by society. Such paradox indicates, therefore, the relevance of investigations which analyze the intrinsic elements of child development as written text producer. Hence, the main purpose of this research consists of analyzing the treatment given to the types of discourse and the teaching situations in which the written text are produced, concerning Portuguese language didactic material collections approved by Programa Nacional do Livro Didático (PNLD 2010) the Brazilian program of didactic book and worked at elementary school. Such materials correspond to the collections adopted in municipal education system schools from Natal, RN which were below the official education indicator IDEB 2009. Thus, the questions that guide this work are: 1. During writing production lessons, is the diversity of types of discourse effectively worked on didactic collections? 2. Which are the types of discourse and the social spheres prioritized when teaching writing production? 3. How is the situation addressed in the production of the written text should be produced? For this research, we retook the authors Bakhtin, Bunzen, Faraco, Freire, Rodrigues, Rojo, Schneuwly e Dolz and we made a list of all types of discourse and spheres contemplated in the propositions of the writing production in didactical books, concerning the eight collections which compounds the first moment of analysis. Then, we verified how the situation of production is oriented by examining two didactic collections if and how they express the elements referring to the social-historical, functional and linguistic-discursive context of the text to be produced. The data obtained indicate: lack of diversification of types of discourse in the collection that compounds the Aggregate Sample of the research; the conception of a diversity based on the didactic of visiting; the recognition of all canonical and hegemonic types of text as one of the privileged objects of study; the centralization on the standard variety of the language and the devaluation of the representative types of cultural diversity; the shortage of productions which retrace to written language related to different technologies of communication and information; and the little emphasis on the types of discourse related to public language practices. As for the situations of production, it is observed the predominance of the school as a producer of dialogic relationships, whose propositions present, for example, text addressees, enunciative positions, support and contexts of restricted circulation, especially at school. Two divergent situations are observed among the collections: the lack of a work in which the situation of production is under the perspective of the types of discourse as object of teaching-learning; the concept of the types of discourse as object of reflection, presenting a differentiated didactic orientation towards the situation of production. This research contributes, therefore, with a mapping of the existence and the treatment of the types of discourse on propositions of writing production in didactic books; with the critical analysis of the approach of written activities, considering the elements of the historical-social, functional and linguistic-discursive context; thus, through teaching, research and public policies, use and selection of didactic material for the area

Fatores que afetam a competitividade do queijo artesanal: um estudo exploratório no Seridó/RN

This article presents a study on the research of the factors that affect the competitiveness of cheese produced in a craft in the Seridó of Rio Grande do Norte in the perception of rural producers. His theory is based on factors of competitiveness and definitions of craft production. This research was performed in the important area of production and marketing of cheeses from the state. The methodology used was exploratory research descriptive type survey. The research field of 213 returned questionnaires validated. those interviewed were rural producers of artisanal cheese, with properties distributed in the districts located in the region. The results showed the production of artisanal cheese in Seridó / RN's main points of difficulty to compete: the great marketing in the informality, workforce has low skills and education, has little technical assistance, low acceptance by technological innovations and absence of integration between producers which creates low productivity and qualification of the production chain

Análise pelo Supply Chain Management da cadeia produtiva da castanha de caju no Rio Grande do Norte

This work presents the cashew nuts chain in the State of Rio Grande do Norte between 1960 and 2009. The main purpose of this research was to find the reason of the low productivity of the cashew nut in this state, identifying in the cashew's chain production the struggling points which were limiting the commerce of this product through the distribution network. Therefore, the Supply Chain Management was used as a logistic analysis methodology, focusing on relationships management between the nodes of this chain, from the producer until the final customer. Many problems were found: first, the precarious production conditions of the small producer don't lead to reach the demanded productivity by the market. The distance, the lack of communication of the small producers among themselves and an archaic way of dealing with their businesses, may be an explanatory reason for this problem, considering that those factors are the main elements which contribute for the weakening of the small producer placed in the productive chain. Another spotted point was that the business-oriented relationship between the producer and the local trader does not allow the small producer's economical development, which interferes in any technological investment to reach a good quality production that fulfills the market demand. And also, the fact that there is a tendency of the final costumer to require lower prices day-byday, forcing a pressure on the nodes transferring to the other and successively until arriving at the producer who inevitably is suffering the biggest impacts from this mentioned pressure.

Técnicas de simplificação de redes e otimização multiobjetivo para análise de variações de tensão em regime permanente provocadas por parques eólicos integrados ao sistema elétrico

This study presents a description of the development model of a representation of simplified grid applied in hybrid load flow for calculation of the voltage variations in a steady-state caused by the wind farm on power system. Also, it proposes an optimal load-flow able to control power factor on connection bar and to minimize the loss. The analysis process on system, led by the wind producer, it has as base given technician supplied by the grid. So, the propose model to the simplification of the grid that allows the necessity of some knowledge only about the data referring the internal network, that is, the part of the network that interests in the analysis. In this way, it is intended to supply forms for the auxiliary in the systematization of the relations between the sector agents. The model for simplified network proposed identifies the internal network, external network and the buses of boulders from a study of vulnerability of the network, attributing them floating liquid powers attributing slack models. It was opted to apply the presented model in Newton-Raphson and a hybrid load flow, composed by The Gauss-Seidel method Zbarra and Summation Power. Finally, presents the results obtained to a developed computational environment of SCILAB and FORTRAN, with their respective analysis and conclusion, comparing them with the ANAREDE

Software inteligente embarcado aplicado à correção de erro na medição de vazão em gás natural

This study developed software rotines, in a system made basically from a processor board producer of signs and supervisory, wich main function was correcting the information measured by a turbine gas meter. This correction is based on the use of an intelligent algorithm formed by an artificial neural net. The rotines were implemented in the habitat of the supervisory as well as in the habitat of the DSP and have three main itens: processing, communication and supervision

Estudo e implementação em plantas físicas de um controlador preditivo generalizado com restrições

This work shows a study about the Generalized Predictive Controllers with Restrictions and their implementation in physical plants. Three types of restrictions will be discussed: restrictions in the variation rate of the signal control, restrictions in the amplitude of the signal control and restrictions in the amplitude of the Out signal (plant response). At the predictive control, the control law is obtained by the minimization of an objective function. To consider the restrictions, this minimization of the objective function is done by the use of a method to solve optimizing problems with restrictions. The chosen method was the Rosen Algorithm (based on the Gradient-projection). The physical plants in this study are two didactical systems of water level control. The first order one (a simple tank) and another of second order, which is formed by two tanks connected in cascade. The codes are implemented in C++ language and the communication with the system to be done through using a data acquisition panel offered by the system producer

Aproveitamento de resíduos de cinza da cana de açúcar em massas cerâmicas

This study aimed to investigate the use of cane sugar ashes from small-scale stills of Eunápolis region, state of Bahia, in pottery mass that can be developed as porcelain stoneware. Bahia is the second largest producer of rum distillery in Brazil. In the production of rum is produced residue called bagasse, which is used to generate electricity in Power plants and in the distillery itself, generating ashes as residue, which is played in nature, causing environmental damage. We studied 5 (five) formulations of 0% 10% 20%, 30% and 40% by weight of the ash, without ignition and 3 (three) formulations of 10%, 20% and 30% with gray ash temperature of 1250ºC. The formulation at 0% by weight of ash was used for a comparison between the traditional mass of porcelain stoneware and the masses with the addition of ash calcined, replacing feldspar. The percentage by weight of kaolin and of Clay was kept the same, 30%, and all raw materials were derived from the state of Bahia. The samples were made in uniaxial array with dimensions of (60 x 20 x 5) mm and compressed to a pressure of 45 MPa. Assays were performed to characterize the raw by X-ray fluorescence, X-ray diffraction, ATD and ATG and Dilatometric analysis. The samples were sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C, for the specimens with the ashes without ash and 1150° C and 1200° C for specimens with the gray level of calcined 60 minutes. and then we made a cooling ramp with the same rate of warming until reach ambient temperature. The sintered bodies were characterized by water absorption, porosity, linear shrinkage, bending strength and XRD of the fracture surface and the results analyzed. It was proven, after results of tests performed, that it is possible to use the ash residue of sugar cane bagasse on ceramic coating with the addition of up to 10% wt of the residue ash