Projeto e controle de um sistema de aquecimento no Laboratório de Avaliação de Medição em Petróleo

The Oil Measurement Evaluation Laboratory (LAMP), located in the Federal University of Rio Grande do Norte (UFRN), has as main goal to evaluate flow and BS&W meters, where the simulation of a bigger number of operation variable in field, guarantees a less uncertain evaluation. The objective of this work is to purpose a heating system design and implementation, which will control the temperature safely and efficiently in order to evaluate and measure it. Temperature is one of the variables which influence the flow and BS&W accurate measurement, directly affecting the fluid viscosity and density in the experiment. To project the heating system it is of great importance to take the laboratory requirements, conditions and current restrictions into consideration. Three alternatives were evaluated: heat exchanger, internal resistance and external resistance. After the analyses are made in order to choose the best alternative for the heating system in the laboratory, control strategies were determined for it, PID control methods in combination with fuzzy logic were used. Results showed a better performance with fuzzy logic than with classic PID

Sistemas de automação e supervisão do laboratório de avaliação dos processos de medição de vazão e BSW

During a petroleum well production process, It is common the slmultaneous oil and water production, in proportion that can vary from 0% up to values close to 100% of water. Moreover, the production flows can vary a lot, depending on the charaeteristies of eaeh reservoir. Thus being, the meters used in field for the flow and BSW (water in the oil) measurement must work well in wide bands of operation. For the evaluation of the operation of these meters, in the different operation conditions, a Laboratory will be built in UFRN, that has for objective to evaluate in an automatic way the processes of flow and BSW petroleum measurement, considering different operation conditions. The good acting of these meters is fundamental for the accuracy of the measures of the volumes of production liquid and rude of petroleum. For the measurement of this production, the petroleum companies use meters that should indicate the values with tha largast possible accuracy and to respect a series of conditions and minimum requirements, estabelished by the united Entrance ANP/INMETRO 19106/2000. The laboratory of Evafuation of the Processes of Measurement of Flow and BSW to be built will possess an oil tank basically, a tank of water, besides a mixer, a tank auditor, a tank for separation and a tank of residues for discard of fluids, fundamental for the evaluation of the flow metars and BSW. The whole process will be automated through the use of a Programmable Logicat Controller (CLP) and of a supervisory system.This laboratory besides allowing the evaluation of flow meters and BSW used by petroleum companies, it will make possible the development of researches related to the automation. Besides, it will be a collaborating element to the development of the Computer Engineering and Automation Department, that it will propitiate the evolution of the faculty and discente, qualifying them for a job market in continuous growth. The present work describes the project of automation of the laboratory that will be built at of UFRN. The system will be automated using a Programmable Logical Controller and a supervisory system. The programming of PLC and the screens of the supervisory system were developed in this work

Estudo da estimativa da incerteza de medição para determinação do BS&W e da vazão aplicado no laboratório de avaliação de medição do petróleo

The considered work presents the procedure for evaluation of the uncertainty related to the calibration of flow measurers and to BS&W. It is about a new method of measurement purposed by the conceptual project of the laboratory LAMP, at Universidade Federal do Rio Grande do Norte, that intends to determine the conventional true value of the BS&W from the total height of the liquid column in the auditor tank, hydrostatic pressure exerted by the liquid column, local gravity, specific mass of the water and the specific mass of the oil, and, to determine the flow, from total height of liquid column and transfer time. The calibration uses a automatized system of monitoration and data acquisition of some necessary largnesses to determine of flow and BS&W, allowing a better trustworthiness of through measurements

Estudo da oxidação do metabissulfito de sódio contido no efluente da carcinicultura

The shrimp farming is a process of creation of shrimp that has been growing rapidly in the country, occupying a meaningful space in the Brazilian exporting. In 2003, this activity presented a volume of 60 millions of tons and 220 millions of dollars, being the main generator of employment and income of the primary sector of the northeast economy. However, it is a new activity with c.a. five years in the Rio Grande do Norte State and therefore needs investment in the technological area. Among the wastewaters of this activity, the sulphite solution is being usually applied in the process of fishing, i.e. retrieval of the shrimps from the farming. The aim of this work is to present the oxidation experimental results of the sulphite that may be and to determine what it s the most efficient method, trough laboratory experiments. The measurements were carried out in a mixing reactor inserting air and with hydrogen peroxide addition with and without UV light. The solutions were prepared synthetically with concentrations found in the wastewater of fishing and also collected in locu. The oxidation process using air was monitorated by iodometric analysis for the sulphite and the oxidation using hydrogen peroxide was evaluated with turbidimetric analysis for sulphate, by spectrophotometer. The sulphite was totally oxidized in both processes. The experimental results permit to conclude that the oxidation by hydrogen peroxide is more efficient and allowed to determine the optimum operational conditions in terms of concentration and time of treatment

Desenvolvimento de protótipo de coletor automático destinado à coleta de amostras de água em corpos aquáticos para análise em laboratório

The aim of this approach is to describe the design and construction of a low-cost automated water sampler prototype. In recent years, there is an increasing need on the use of automated equipments for hydro climatic variables to be use in urban and rural environments. Such devices are always used to provide measured information which is of crucial importance on the development of water resources strategies at watershed scale. Actually, many research and water public institutions have been using these kinds of equipments. In most of the cases, automated equipments are expensive and need to be imported, generating a situation of technologic dependency. The prototype is based on an electronic system which controls a peristaltic pump functioning, five solenoid valves and an ultrasonic sensor connected to a datalloger. An interface with the user allows communication with a PC, when the equipment functioning parameters can be provided. The equipment has a hydraulic module composed by a 12V peristaltic pump connected to a distribution circuit composed by five solenoid valves, one of them being used to clean the circuit before each sampling procedure. Samples are collected by four 1.95 polyethylene bottles. The sampler body was made of acrylic material, with a cylindrical shape, and dimensions 0.72 m and 0.38 m height and diameter, respectively. The weight of the equipment without samples is approximately 15 kg, which infers to its portability. The prototype development total cost budget was approximately US$ 1,560.00. Laboratory tests aimed to evaluate the equipment performance and functioning demonstrated satisfactory results

Nietzsche e Rosset: alegria, impulso à criação

Understood in a project of transvaluation of values, the joy is one of the central themes of the thought of Friedrich Nietzsche and Clément Rosset. Opposed to the dogmatic philosophy that moralize and robs your strength to think of it as "happiness", evaluated, in short, a target linked to virtue and rationality these thinkers propose a perspective that makes the joy of point to an instance extraterrestrial and back to the earth, to the body. In this vein, beyond the oppositions of values constitutive of metaphysics dogmatic, the joy and suffering are conceived as elements that are not mutually exclusive, they are complementary as foundations of a gaia(ta) science, based in laughter and friendship. Contents of a tragic wisdom that leads to an unconditional fidelity to the real (expressed in formulas of amor fati Nietzsche and unrestricted approval of existence Rosset), the joy is then interview as vital impulse, the force majeure, the strength plastic encourages artistic creation: the joy of children playing

Acelaração do universo e criação gravitacional de matéria escura fria: novos modelos e testes observacionais

Recent astronomical observations (involving supernovae type Ia, cosmic background radiation anisotropy and galaxy clusters probes) have provided strong evidence that the observed universe is described by an accelerating, flat model whose space-time properties can be represented by the FriedmannRobertsonWalker (FRW) metric. However, the nature of the substance or mechanism behind the current cosmic acceleration remains unknown and its determination constitutes a challenging problem for modern cosmology. In the general relativistic description, an accelerat ing regime is usually obtained by assuming the existence of an exotic energy component endowed with negative pressure, called dark energy, which is usually represented by a cosmological constant ¤ associated to the vacuum energy density. All observational data available so far are in good agreement with the concordance cosmic ¤CDM model. Nevertheless, such models are plagued with several problems thereby inspiring many authors to propose alternative candidates in the relativistic context. In this thesis, a new kind of accelerating flat model with no dark energy and fully dominated by cold dark matter (CDM) is proposed. The number of CDM particles is not conserved and the present accelerating stage is a consequence of the negative pressure describing the irreversible process of gravitational particle creation. In order to have a transition from a decelerating to an accelerating regime at low redshifts, the matter creation rate proposed here depends on 2 parameters (y and ߯): the first one identifies a constant term of the order of H0 and the second one describes a time variation proportional to he Hubble parameter H(t). In this scenario, H0 does not need to be small in order to solve the age problem and the transition happens even if there is no matter creation during the radiation and part of the matter dominated phase (when the ß term is negligible). Like in flat ACDM scenarios, the dimming of distant type Ia supernovae can be fitted with just one free parameter, and the coincidence problem plaguing the models driven by the cosmological constant. ACDM is absent. The limits endowed with with the existence of the quasar APM 08279+5255, located at z = 3:91 and with an estimated ages between 2 and 3 Gyr are also investigated. In the simplest case (ß = 0), the model is compatible with the existence of the quasar for y > 0:56 whether the age of the quasar is 2.0 Gyr. For 3 Gyr the limit derived is y > 0:72. New limits for the formation redshift of the quasar are also established

Criação da matéria em cosmologias com velocidade da luz variável e eletrônico não-linear

In this work we obtain the cosmological solutions and investigate the thermodynamics of matter creation in two diferent contexts. In the first we propose a cosmological model with a time varying speed of light c. We consider two diferent time dependence of c for a at Friedmann-Robertson- Walker (FRW) universe. We write the energy conservation law arising from Einstein equations and study how particles are created as c decreases with cosmic epoch. The variation of c is coupled to a cosmological Λ term and both singular and non-singular solutions are possible. We calculate the "adiabatic" particle creation rate and the total number of particles as a function of time and find the constrains imposed by the second law of thermodynamics upon the models. In the second scenario, we study the nonlinearity of the electrodynamics as a source of matter creation in the cosmological models with at FRW geometry. We write the energy conservation law arising from Einstein field equations with cosmological term Λ, solve the field equations and study how particles are created as the magnetic field B changes with cosmic epoch. We obtain solutions for the adiabatic particle creation rate, the total number of particles and the scale factor as a function of time in three cases: Λ = 0, Λ = constant and Λ α H2 (cosmological term proportional to the Hubble parameter). In all cases, the second law of thermodynamics demands that the universe is not contracting (H ≥ 0). The first two solutions are non-singular and exhibit in ationary periods. The third case studied allows an always in ationary universe for a suficiently large cosmological term

Avaliação e monitoramento de políticas públicas: criação de um modelo sistêmico aplicado ao Instituto de Assistência Técnica e Extensão Rural do Rio Grande do Norte (EMATER-RN)

The nature of this thesis is interventionist and aims to create an alternative on how to control and evaluate the public policies implementation developed at the Institute for Technical Assistance and Rural Extension of Rio Grande do Norte State. The cenarium takes place in a public institution , classified as a municipality that belongs to the Rio Grande do Norte government and adopts the design science research methodology , where it generates a set of artifacts that guide the development of a computerized information system . To ensure the decisions, the literature was reviewed aiming to bring and highlight concepts that will be used as base to build the intervention. The use of an effective methodology called Iconix systems analysis , provides a software development process in a short time . As a result of many artifacts created by the methodology there is a software computer able of running on the Internet environment with G2C behavior, it is suggested as a management tool for monitoring artifacts generated by the various methods. Moreover, it reveals barriers faced in the public companies environment such as lack of infrastructure , the strength of the workforce and the executives behavior

O plantador de cidades e a criação do espaço moderno : a construção de uma Natal moderna na administração Sylvio Pedroza (1946-1950)

O propósito deste trabalho é analisar as transformações sofridas pelo espaço urbano da cidade do Natal durante a gestão do prefeito Sylvio Piza Pedroza (1946-1950). Neste intuito, nos esforçamos em analisar em que sentido os discursos e as respectivas representações da cidade moderna foram responsáveis pela construção de novos espaços na capital do Rio Grande do Norte, espaços que por sua vez, foram utilizados para justificar duplamente a gestão Piza Pedroza, e o próprio prefeito enquanto exemplos de um momento de modernidade e progresso da cidade. No intuito de responder nosso objetivo, analisamos no decorrer da dissertação três elementos fundamentais para a construção dessa Natal moderna da gestão Piza Pedroza. Dentre eles destacamos as representações construídas pelos jornais natalenses, recifenses e fluminense; a imagem forjada e a relação de legitimação (a partir do espaço da cidade de Natal) possibilitada pela relação entre Câmara Cascudo e Sylvio Pedroza. Por último, analisamos o Arquivo Sylvio Pedroza (ASP), da Fundação José Augusto, percebendo esse suporte como um espaço de inscrição do sujeito e da cidade moderna. Nessa última etapa nos detivemos na apreciação das correspondências e nas fotografias do ASP, percebendo como essas fontes são fundamentais na elaboração e seleção das paisagens modernas da Natal da segunda metade da década de 1940

Distribuição diária do comportamento da mosca da fruta Anastrepha zenildae Zucchi, (Diptera: Tephritidae) em laboratório.

The knowledge of Anastrepha zenildae behavioral aspects combined with the biology of Tephritidae may contribute to monitoring and control programs of this fruit fly that is considered as economically important to the Rio Grande do Norte state. In order to characterize the daily activity profile of this species, we studied the behaviors of resting, locomotion, feeding, cleaning, courtship, copulation and oviposition of animals submitted to an artificial 12:12h light-dark cycle (750:1lux) with controlled temperature (26±2 °C). The observations were made with groups of 16 males and 16 females during 3 consecutive days each generation from parental to F5. Resting, locomotion, feeding and cleaning data were recorded as frequency and time of occurrence by scanning technique in 15 minutes windows per hour, with a record each minute. Courtship, copulation and oviposition were recorded as frequency, time of occurrence and duration by al occurrences technique. Resting was the most frequent behavior with males resting more than females. Locomotion was more evident in the first half of the ligh phase with higher values in females. Cleaning and feeding behaviors were more frequent in the second half of the light phase for both sexes with females eating more frequently than males. During the courtship, males were grouped in lek formations showing wings vibration and pheromone liberation. Courtship occurred more frequently 4 to 7 h after lights on (81,9%) with copulations being more frequent 6 h after lights on with a mean duration of 58,1±40,4 min. Copulation attempts were observed in males inside and outside the lek with aggressive behavior being observed only between males in the lek. Oviposition behavior was similar to that described for other species of the genus with a peak of this activity 2-3 h after the lights on, mean duration of 43, 7±34, 8 sec and 2 to 5 eggs by event. According to the results, sexual behavior of A. zenildae is temporally different of other sympatric species of the genus, being favorable to the reproductive isolation as well as the use of resources as oviposition substrate.

Criação de empresas à luz do modelo de decisão effectuation: um estudo com mulheres empreendedoras no município de Currais Novos/RN

This study analysed the creation of businesses by entrepreneur women in the Currais Novos city, looking for verifying if they used making decision processes aligned to the Effectuation logic throughout the creation of their companies. To this, was accomplished a multiple cases and exploratory study, whit a qualitative approach of analyse, using the thematic life history technique that match accounts and semi-structured interview route, being accomplished like a long interview, where the researcher interact with the informer continuously. The semi-structured interview route was created by the adaptation of the interview route used by Tasic (2007). The present study appealed to a intentional selection of individuals in function of their importance in relation to the boarded theme. This means that the individuals were chosen in function of their social and theoretical representatively inside the considered situation. The participant individuals of this research were five entrepreneur women that act in the Currais Novos city, owners of five different companies. To the data treatment and analyse, was chosen the content analyse technique. This study worked with a priori theoretical categories. The categories of analyse in this study was obtained with base in the Effectuation approach (SARASVATHY, 2001a, 2001b, 2008), that is an alternative model of making decision to the classic model based in the causality principle. These categories are Clarity of Initial Aims , Tolerance to the Lost and Initials Investments , Control of Resources ( who I am , what I know and who I know ) and Promoting Over Contingencies . As result, the entrepreneur women researched, in a general way, hadn t clear initial aims at the companies creation moment, hadn t aversion to the risk to lose the time and the money that they were investing in the company in formation, they highlighted the products and services identity that offered with a strong link with Seridó region, they had experience in the field of activity in which they decided to open their companies, had the commitment of partners in the beginning of the business and they knew to transform the initial difficulties in opportunities. By the end, this study conclude that the entrepreneur women studied used, in a big part, making decision processes aligned to the Effectuation logic throughout the creation of their companies

Desenvolvimento de dobras e falhas em ambiente distensional: Aplicação da modelagem física

The geological modeling allows, at laboratory scaling, the simulation of the geometric and kinematic evolution of geological structures. The importance of the knowledge of these structures grows when we consider their role in the creation of traps or conduits to oil and water. In the present work we simulated the formation of folds and faults in extensional environment, through physical and numerical modeling, using a sandbox apparatus and MOVE2010 software. The physical modeling of structures developed in the hangingwall of a listric fault, showed the formation of active and inactive axial zones. In consonance with the literature, we verified the formation of a rollover between these two axial zones. The crestal collapse of the anticline formed grabens, limited by secondary faults, perpendicular to the extension, with a curvilinear aspect. Adjacent to these faults we registered the formation of transversal folds, parallel to the extension, characterized by a syncline in the fault hangingwall. We also observed drag folds near the faults surfaces, these faults are parallel to the fault surface and presented an anticline in the footwall and a syncline hangingwall. To observe the influence of geometrical variations (dip and width) in the flat of a flat-ramp fault, we made two experimental series, being the first with the flat varying in dip and width and the second maintaining the flat variation in width but horizontal. These experiments developed secondary faults, perpendicular to the extension, that were grouped in three sets: i) antithetic faults with a curvilinear geometry and synthetic faults, with a more rectilinear geometry, both nucleated in the base of sedimentary pile. The normal antithetic faults can rotate, during the extension, presenting a pseudo-inverse kinematics. ii) Faults nucleated at the top of the sedimentary pile. The propagation of these faults is made through coalescence of segments, originating, sometimes, the formation of relay ramps. iii) Reverse faults, are nucleated in the flat-ramp interface. Comparing the two models we verified that the dip of the flat favors a differentiated nucleation of the faults at the two extremities of the mater fault. V These two flat-ramp models also generated an anticline-syncline pair, drag and transversal folds. The anticline was formed above the flat being sub-parallel to the master fault plane, while the syncline was formed in more distal areas of the fault. Due the geometrical variation of these two folds we can define three structural domains. Using the physical experiments as a template, we also made numerical modeling experiments, with flat-ramp faults presenting variation in the flat. Secondary antithetic, synthetic and reverse faults were generated in both models. The numerical modeling formed two folds, and anticline above the flat and a syncline further away of the master fault. The geometric variation of these two folds allowed the definition of three structural domains parallel to the extension. These data reinforce the physical models. The comparisons between natural data of a flat-ramp fault in the Potiguar basin with the data of physical and numerical simulations, showed that, in both cases, the variation of the geometry of the flat produces, variation in the hangingwall geometry