48 resultados para Suco de laranja concentrado
Resumo:
The general objective of this study was to contribute to the understanding of the chemical evolution of fluids that percolate through carbonate rocks of the Jandaíra Formation. The oxidation and reduction conditions in which grains, source and cement were formed was investigated using the cathodoluminescence technique (CL). The study area is located in the west part of the Potiguar Basin (Fazenda Belém field) and Rosário Ledge (Felipe Guerra municipality, State of Rio Grande do Norte, Brazil). The analysis of thin sections of carbonate rocks under CL revealed that grains (allochemical or not) and diagenetic products (micritization, dolomitization, neomorphism and cementation) exhibit since absence of luminescence the various luminescence colors (yellow, orange, red, brown, and blue) in a variety of intensities. As pure calcite shows dark blue luminescence, the occurrence of different luminescence colors in calcite crystals suggest one or more punctual crystal defects such as free electron, free space and impurity. The dyeing of thin sections with alizarin and potassium ferrocyanide revealed the absence of ferrous carbonate in the different lithotypes of Jandaíra Formation. Therefore, the different colors and intensities of CL observed in these rocks are probably caused by the presence of ion activators such as Mn2+ and is not an activator/inhibitor combination. In the same way, the absence of luminescence is very probably caused by the absence of activator ions and not due to the low concentration of inhibitor ions such as Fe2+. The incorporation of Mn2+ in the different members of the Jandaíra Formation must have been controlled by the redox state of the depositional environment and diagenesis. Therefore, it is possible that the luminescent members have been formed (e.g.,ooids) or have been modified (gastropod neomorphism) under reduction conditions in the depositional environments, in subsurface during the burial, or, in the case of Rosario Ledge samples , during the post-burial return to surface conditions. As regards the sudden changes from low to moderate and to strong luminescence, these features should indicate the precipitation of a fluid with chemical fluctuations, which formed the frequent zonations in the block cement of the Rosario Ledge samples. This study suggests that the different intensities and colors of CL should be correlated with the Mn2+ and Fe2+ contents, and stable isotopes of samples to determine the salinity, temperature, pH e Eh conditions during deposition
Resumo:
Objective: To determine the clinical maternal and neonatal outcomes in HELLP syndrome patients treated with dexamethasone who either developed renal injury or renal insufficiency and to identify predictive values of urea and creatinine for the identification of subjects with HELLP syndrome at risk of developing renal insufficiency. Methods: Non-radomized intervention study of dexamethasone use in HELLP syndrome. A total of 62 patients were enrolled at Maternidade Escola Januário Cicco (MEJC). Patients received a total of 30 mg of dexamethasone IV, in three doses of 10 mg every 12 hours. A clinical and laboratory follow up were performed at 24, 48 and 72 hours. Patients were followed up to 6 months after delivery. Patients were grouped in accordance to renal function, i.e, normal and some type of renal lesion. Renal lesion was considered when creatinine was equal or greater than 1.3 mg/dl and diuresis less than 100 ml in 4 hours period and renal insufficiency was defined when dialysis was needed. Results: A total of 1230 patients with preeclampsia were admitted at MEJC. Of those 62 (5%) developed HELLP syndrome. There was no statistical difference in the groups with renal involvement or normal renal function with respect to the demographics, type of anesthesia used and delivery, and weight of the newborn. An improvement in the AST, ALT, LDH, haptoglobine, antithrombine, fibrinogenen and platelets was observed within 72 hours after dexamethosone use. There was a significant increase in the diuresis within the interval of 6 hours before the delivery and 24 hours after it. Of the 62 patients, 46 (74. 2%) had normal renal function and 16 (25.8%) evolved with renal lesion, with 5 (8.1%) needing dialysis. These 5 patients who received dialysis recovered the xi renal function. The delay in administering dexamethasone increased in 4.6% the risk of development of renal insufficiency. Patients with renal insufficiency had received significantly more blood products than subjects without renal lesion (p=0.03). Diuresis, leukocytes, uric acid, urea, creatinine were significantly different between the groups with normal renal function, renal lesion and renal insufficiency. The levels of creatinine 1.2mg/dl and uric acid 51mg/dl, at admission are predictive of subjects who will evolve with renal lesion (p<0.001). Maternal mortality was 3.2%. None of the subjects with renal insufficiency evolved with chronic renal disease. Conclusions: Dexamethasone in patients with HELLP syndrome seems to reduce significantly the hepatic microthrombosis and normalize hemostasis as seen by improvement of liver function. Renal injury can be considered, in HELLP syndrome, when creatinine levels are greater than 1.3 mg/dl and diuresis less than 100 ml/h in interval of 4 hours. The level of creatinine greater than 1.2 mg/dl and urea greater than 51mg/dl are predictive of subjects with HELLP syndrome who will develop renal injury. Patients who receive more red cell packs develop renal insufficiency. Finally, the delay in administering dexamethasone increases the risk of developing renal insufficiency
Resumo:
The following study aims to verify in which hypothesis res judicata, when it comes of an unconstitutional decision, shall not prevail over Constitution. It displayed the characteristics of formal and material constitutional systems. It debated the concepts of existence, validity and efficacy of juridical rules and acts. It dissertated about the idea of Constitution s superiority and about the birth of the judicial review of constitutionality. It focused some contemporary models of this judicial review and its historical evolution in Brazil, showing its effects towards the current Constitution. It sustained that the decision given by Supremo Tribunal Federal during abstract control of rules must bind even legislative bodies, preventing them to produce the same rules previously declared unconstitutional. It held up that all parts of the decision of Supremo Tribunal Federal oblige, even the juridical arguments employed, in both diffused and concentrated reviews. It showed that, despite these models of review live together in Brazil, our constitutional system preferred the concentrated one, considering one only court over the other constitutional organs. It discussed about res judicata with the purpose of clarifying its juridical nature, its objective and subjective limits and its regulation in collective demands. It explained that the material res judicata is an effect of a decision which cannot be reviewed, which makes the law s will free of discussion, binding the contendants and avoiding that other courts, judging future demands about the same object, may decide differently. It showed how the regulation of res judicata in collective demands, in respect oh their subjective limits, is useful to demonstrate that it is not the material law who must adapt itself to res judicata as traditionally thought, but res judicata, as a warranty of juridical certainty and security, who must be shaped from the debated rule. It presented to view the main doctrinal conceptions about res judicata s review in the hypothesis of unconstitutional judgement. It concluded that the decisions forged by unconstitutional rules or interpretations reputed not compatible to the Constitution by Supremo Tribunal Federal, in spite of it can make res judicata, may be reviewed beyond the term to file a recissory claim, since while the debated law is still valid, no matter if its decision was before or after the res judicata. At the end, it asserted that, when it is not legally authorized, the judicial review of res judicata is not admissible, after the term to file a recissory claim, under the argument that there was no direct violation to the constitutional principle or rule
Resumo:
Brazil since its first republican constitution has adopted systems of laws control. The review activity was given to three state powers or functions state, Executive, Legislative and Judiciary. However, it appears that in the country along the constitutional history, has stood considerably the jurisdictional control of the most important control. Initially, back in 1891, Brazil adopted the jurisdictional control of diffuse from U.S, whose role in monitoring of standards is delivered to all organs of the judiciary, which may face a case, put on trial, ascertain whether or not the possibility of applying a law, removing its impact in case of unconstitutionality. In 1969, entered in the second legal model of judicial review, the concentrated control of constitutionality, whose inspiration comes from the positivist theory of Hans Kelsen, and was adopted by the Austrian Constitution of 1920. According to the abstract control the supervision of law is given to a Court or Constitutional Court, responsible for the analysis of the legal constitutionality independent of its application to a specific case. In Brazil the role of concentrated control was handed over exclusively to the Supreme Court, which serves as the Constitutional Court, which accumulates that function with other constitutionally provided jurisdiction. Throughout this period, from 1891 until today, Brazil has maintained a dual system of judicial control of legal constitutionality, where they coexist and harmonize the diffuse control exercised by any organ of the Judiciary, and concentrated control of competence the Supreme Court. However, one must recognize that with the advent of the Federal Constitution of 1988, the concentrated control has emerged on the national stage due to two important factors: the expansion of the legal capacity to sue and the inclusion of other ways control, besides the already known Direct Claim of Unconstitutionality. This concentrated control and projection of the Supreme Court s attempt to become a true constitutional court, led to a relative weakening of diffuse control even when performed by the Brazilian Constitutional Court. In order to become a true constitutional court, all decisions handed down by the Supreme in the exercise of constitutional jurisdiction should have the same weight and the same measure, or at least bring improvement to similar effects, once is the responsible for the final word when it comes to constitutional interpretation. Thus, the writs of certiorari and stare decisis were responsible for profound changes in the diffuse control, allowing the Supreme Court can strengthen its decisions even in the diffuse control. These two institutions have substantially changed the legal status of diffuse control, allowing an extension of the effects of decisions handed down by the Supreme Court, so that you can no longer be said that the effects of this control to restrict the disputing parties in the process
Resumo:
This document approaches the formal and material limits of the constitucionalidade control for the Supreme Federal Court, iniating with the study of the Constitution, detaching its evolution, nature and meanings, passing for its historical evolution, offering still a unconstitutionality concept. Is work the principles as material Constitution, making the distinction entere principles and rules, detaching the characteristics of the principles constitutional, and the basic principle of the Constituition. It analyzes metodologics the historical parameters and of the brazilian system of constitutionality control and detaches the paper of the Supreme Federal Court as positive legislator. It observes the beddings of the constitutionality control and the legitimacy of the Supreme Federal Court. Is examines the performance of the Supreme Federal Court in face of the principle of the legal security. Is offers a vision on the experience of the control of constitutionality in other constries. It still approaches the control of constitutionality in Brazil, detaching the critical points of its formal and material limits. Is verifies the application of the principles constitutional for the Supreme Federal Court in the diffuse control and the intent control of constitutionality, as well as the performance of the Supreme Federal Court ahead of the unconstitutional omissions. It brings to the debate the new perspectives how much to the formal and material limits of the control of constitutionality for the Supreme Federal Court. Objective to elaborate considerations concerning the limits of the constitutional jurisdiction from the model of Constituition, the character politican of the difficulties with respect to the definition of its formal and material limits from the performance of the Supreme Federal Court
Resumo:
The Nile tilapia, Oreochromis niloticus, is an important omnivorous fish in the reservoirs of the semi-arid region of Brazil. Throughout its growth tilapia s feeding behavior changes from a visual predator of zooplankton to a filter-feeder, collecting suspended particulate matter, including planktonic organisms, through pumping. This feature results in different impacts of tilapia on plankton community as the fish grows. Aiming to quantify the functional response of different sizes of Nile tilapia on zooplankton experiments in microcosms scale in the laboratory and in mesocosm scale in the field were carried out. The data were fitted to four different models of functional response. The best fits were obtained for nonlinear models in laboratory experiments. While the experiments in mesocosms were the best settings for responses of type I (juvenile and adult tilapia) and type III (fry). The Manly's alpha index was used to evaluate the feeding selectivity of tilapia on the three main groups of the zooplankton in the experiments in mesocosms. The results show that: (i) rotifers were the preferred prey of fingerlings,(ii) copepods were rejected by fry and juvenile tilapia and (iii) adult fish fed non-selectively on copepods, cladocerans and rotifers. The functional response models obtained in this research can be applied to population models and help in modeling the dynamics of interactions between Nile tilapia and the planktonic communities in the reservoirs of the semi-arid
Resumo:
Industrial development experienced by Brazil from the 1950s, changed the concentration of population in the country. The process of development of domestic industry, concentrated in urban areas, crowded growing portion of the population.The Southeast region during the first stage of industrialization driven by the state, with the implementation of Plan goals, captained the major industrial projects implemented in the period and became the main industrial center of the country.In the decade from 1960 to 1980 the state action was marked by numerous regional development projects, softening the industrial concentration and Brazilian investment redirected to the Northeast.The second National Development Plan implemented in the 1970s led to major investments Northeast.This period marked the widespread urban growth and institutionalization of the first metropolitan areas in Brazil.The change of this developmental process is altered with the fiscal and financial crisis of the state in the 1980s and 1990s and spending cuts aimed at national development, reorienting the economy to liberal policies of economic liberalization and reduction of activity in the economy.Industrial policy was relegated to local development plans from the 1990s to the federating units fitting the wide use of tax incentives, the "war tax" to the continued industrialization process.In this context of the national economy work seeks to analyze the industrial setting in the metropolitan areas of Fortaleza, Recife and Salvador between 1995 and 2010.Although the metropolitan areas of Fortaleza, Recife and Salvador are the main urban centers of the Northeast, responsible for the advancement of industrial development, reconfigurations occurred between 1995 and 2010 by changing the level of industrial specialization built by regional division of labor in these regions.The work will be carried out by the method of descriptive analysis of the literature review on regional and urban development.Constitute quantitative method as the secondary data analysis of formal employment from the Annual Social Information (RAIS) Ministry of Labour and Employment (MTE).Using data RAIS / MTE analyzes the industrial specialization index using the Locational Quotient (LQ).Thus, it is assumed as a parameter analysis QL> 1, when the region has become specialized in a particular sector or QL <1, when the region does not have expertise in industrial sector analyzed.The conclusion of study indicates that there was in these metropolitan areas maintained the same bias hub.Fiscal policies, the states, was not successful in diversifying the productive structure and the Northeast region itself.This result is demonstrated by the need and dependence on state investments in the region to promote development.Industrial policies of recent years have been positive to meet the objectives of employment generation, but there must be specific policies for better diversification of production, in addition to integrating the economy of the Northeast sector and regionally
Resumo:
The pain is a sensuous and emotional experience unpleasant associated or related to real injury or potencial of the tissues. It is considered an individual and subjective experience generally has been described in the literature about in the neonatal stage a lot. This study has descriptive and exploratory character with a qualitative approach. The study has with objectives to analyze the performance of the nursing technicians working with newborns admitted in the ITUN, seeking to describe the perception of the nursing technicians about the pain, identify the parameters used for the detection and evaluation of pain in them, trying to describe the ons of this team about the pain in the newborns in ITUN. The subjects are nine nursing technicians of the ITU of the Parenting School Januário Cicco in Natal-RN, engaged in direct assistance to newborns in the ITU, on the turn of the morning, which was prepared to participate in the search. The collection of the data was conducted through a structured interview with tree questions; through a non-participatory observation with a structured roadmap and were used to record and pass on call was also as a way of obtaining data. The start of the collection made after the assent of the Ethics Committee / UFRN in November, 2007. The speakings have been transcribed and data read extensively to obtain categories.The analysis of the content made in terms of Bardin. Emerged three main categories of significance: Perceptioning of pain in newborns; Caring for the newborns with pain; Registering the pain in the newborns. A nursing technicians identifies the pain in the newborns, for the most part, so empirical, using signs of behavioral or physiological changes in isolation, giving little emphasis to the environment and to respect that the newborns is inserted. It was found that the attitudes cited by subjects of the search before the newborns with pain, are for the most part non-pharmacological actions such as sucking nutrient not, a proper positioning and measures of comfort, however pharmacological actions have also been reported.These is also the absence of records of nursing records in the report of pain and actions to minimize them and, in records and for the passage of call. With this study we understand the role of the nursing technicians, and seek to contribute to subsidies for the practice of professionals involved in caring for this age group, and also in the search for a humane assistance to the newborns
Resumo:
The Balanced Scorecard (BSC) has been used as a communication tool and strategy monitoring, helping organizations alignment, inserting a new vision with integrated use of performance indicators nonfinancial together with some financial measures. Their proper use leads to a new management style, focused on management strategies, using for this, basically three dimensions: strategy, which should be translated as the primary responsibility for the organizational agenda, the focus that should be concentrated, and the organization with the mobilization of employees. This paper deals with theoretical considerations about strategies, strategic planning, BSC and principles of the organization focused on strategy (OFE). Describes a study of four companies that won the National Quality Award - PNQ, among which, three have adopted the BSC and adopts a particular model of strategic management. The research aimed to make an analysis of the companies regarding adherence to the five principles of OFE, proposed by the BSC, seeking to answer whether the use of BSC is a prerequisite for accession to the Principles of OFE. The results showed that the BSC is a strategic management model that promotes focus and organizational alignment and is a major facilitator in the process, however, cannot be considered a prerequisite for accession to the principles of the OFE, because the four companies studied, including the one that adopt its own model of strategic management, have great levels of adherence to such principles. Making the organization focused on strategy can be considered a natural movement essential for the strategic management, which is not necessarily conditioned by the use of BSC
Resumo:
The progressing cavity pump artificial lift system, PCP, is a main lift system used in oil production industry. As this artificial lift application grows the knowledge of it s dynamics behavior, the application of automatic control and the developing of equipment selection design specialist systems are more useful. This work presents tools for dynamic analysis, control technics and a specialist system for selecting lift equipments for this artificial lift technology. The PCP artificial lift system consists of a progressing cavity pump installed downhole in the production tubing edge. The pump consists of two parts, a stator and a rotor, and is set in motion by the rotation of the rotor transmitted through a rod string installed in the tubing. The surface equipment generates and transmits the rotation to the rod string. First, is presented the developing of a complete mathematical dynamic model of PCP system. This model is simplified for use in several conditions, including steady state for sizing PCP equipments, like pump, rod string and drive head. This model is used to implement a computer simulator able to help in system analysis and to operates as a well with a controller and allows testing and developing of control algorithms. The next developing applies control technics to PCP system to optimize pumping velocity to achieve productivity and durability of downhole components. The mathematical model is linearized to apply conventional control technics including observability and controllability of the system and develop design rules for PI controller. Stability conditions are stated for operation point of the system. A fuzzy rule-based control system are developed from a PI controller using a inference machine based on Mandami operators. The fuzzy logic is applied to develop a specialist system that selects PCP equipments too. The developed technics to simulate and the linearized model was used in an actual well where a control system is installed. This control system consists of a pump intake pressure sensor, an industrial controller and a variable speed drive. The PI control was applied and fuzzy controller was applied to optimize simulated and actual well operation and the results was compared. The simulated and actual open loop response was compared to validate simulation. A case study was accomplished to validate equipment selection specialist system
Resumo:
In general, the materials used as substrates in the project of microstrip antennas are: isotropic, anisotropic dielectrics and ferrimagnetic materials (magnetic anisotropy). The use of ferrimagnetic materials as substrates in microstrip patch antennas has been concentrated on the analysis of antennas with circular and rectangular patches. However, a new class of materials, called metamaterials, has been currently the focus of a great deal of interest. These materials exhibit bianisotropic characteristics, with permittivity and permeability tensors. The main objective of this work is to develop a theoretical and numerical analysis for the radiation characteristics of annular ring microstrip antennas, using ferrites and metamaterials as substrates. The full wave analysis is performed in the Hankel transform domain through the application of the Hertz vector potentials. Considering the definition of the Hertz potentials and imposing the boundary conditions, the dyadic Green s function components are obtained relating the surface current density components at the plane of the patch to the electric field tangential components. Then, Galerkin s method is used to obtain a system of matrix equations, whose solution gives the antenna resonant frequency. From this modeling, it is possible to obtain numerical results for the resonant frequency, radiation pattern, return loss, and antenna bandwidth as a function of the annular ring physical parameters, for different configurations and substrates. The theoretical analysis was developed for annular ring microstrip antennas on a double ferrimagnetic/isotropic dielectric substrate or metamaterial/isotropic dielectric substrate. Also, the analysis for annular ring microstrip antennas on a single ferrimagnetic or metamaterial layer and for suspended antennas can be performed as particular cases
Resumo:
The method of artificial lift of progressing cavity pump is very efficient in the production of oils with high viscosity and oils that carry a great amount of sand. This characteristic converted this lift method into the second most useful one in oil fields production. As it grows the number of its applications it also increases the necessity to dominate its work in a way to define it the best operational set point. To contribute to the knowledge of the operational method of artificial lift of progressing cavity pump, this work intends to develop a computational simulator for oil wells equipped with an artificial lift system. The computational simulator of the system will be able to represent its dynamic behavior when submitted to the various operational conditions. The system was divided into five subsystems: induction motor, multiphase flows into production tubing, rod string, progressing cavity pump and annular tubing-casing. The modeling and simulation of each subsystem permitted to evaluate the dynamic characteristics that defined the criteria connections. With the connections of the subsystems it was possible to obtain the dynamic characteristics of the most important arrays belonging to the system, such as: pressure discharge, pressure intake, pumping rate, rod string rotation and torque applied to polish string. The shown results added to a friendly graphical interface converted the PCP simulator in a great potential tool with a didactic characteristic in serving the technical capability for the system operators and also permitting the production engineering to achieve a more detail analysis of the dynamic operational oil wells equipped with the progressing cavity pump
Resumo:
In this work, it is proposed the study of the effect of barium oxide acting as synthetic flow in the behavior of masses for stoneware from the use of raw materials found in the deposits of minerals of the Rio Grande do Norte that it makes use of a great natural potential for the industrialization of the product. The porcelanato is a sophisticated product with excellent final properties being applied as ceramic coating in buildings of high standard of engineering. The raw materials selected for the development of the study had been two types of argilas, two types of feldspatos, dolomita, talco, barium carbonate and silica, being characterized by X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis and thermal analysis. Thus, it is intended to define four formulations using the cited raw materials that will be processed, conformed and sintered in the temperatures of 1150 °C, 1175 °C, 1200 °C, 1225 °C e 1250 °C. From the physical characterizations, chemical and morphologic of the formed formulations, the effect of barium oxide is determined in the physical and mechanical properties of the studied system carrying water absorption tests, linear retraction, apparent porosity, apparent specific mass, compacting curve, flexural strength and microstructural analysis by XRD and SEM. After analyzing the results, indicated that barium oxide acts as a flux of high temperature and as the ordering of structure, where the embedded glass phase has the nucleating effect phase potassium silico-aluminum reacting with free silica which together with the high content of potassium concentrated form a new crystalline phase called microcline. The masses studied with the addition of barium oxide present physical-mechanical properties highly satisfactory in reduced firing temperatures, which implies a saving in energy given off in the production and increased productivity
Resumo:
Considering the constant evolution of technology in growth and the need for production techniques in the ceramics area to move forward together, we sought in this study, the research and development of polymeric precursor method to obtain inorganic ceramic pigments. Method that provides quality to obtain the precursor powders of oxides and pigments at the same time, offers time and cost advantages, such as reproducibility, purity and low temperature heat treatment, control of stoichiometry. This work used chromium nitrate and iron nitrate as precursors. The synthesis is based on the dissolution of citric acid as a complexing agent, addition of metal oxides, such as ion chromophores; polymerization with ethylene glycol and doping with titanium oxide. Passing through precalcination, breakdown, thermal treatments at different temperatures of calcination (700 to 1100 oC), resulting in pigments: green for chromium oxide deposited on TiO2 (CrTiO3) and orange for iron oxide deposited on TiO2 ( FeTiO3). Noticing an increase of opacity with increasing temperature. Were performed thermal analysis (TG and ATD) in order to evaluate its thermodecomposition. The powders were also characterized by techniques such as XRD, revealing the formation of crystalline phases such as iron titanate (FeTiO3) and chrome titanate (CrTiO3), SEM, demonstrating formation of rounded particles for both oxides and Spectroscopy in the UV-Visible Region, verifying the potential variation and chromaticity os pigments. Thus, the synthesized oxides were within the requirements to be applied as pigments and shown to be possible to propose its use in ceramic materials
Resumo:
Flex-fuel vehicles are equipped with Otto Cycle internal combustion engines and have the capability of functioning with more than one type of fuel, mixed at the same tank and burned in the combustion chamber simultaneously. This sort of motorization is a world pattern due to the scarcity of petroleum, the trade of several types of fuels, technology advances and the restriction imposed to gas emissions to the atmosphere. In Brazil, the Flexfuel vehicles are a reality, specially the ones using fuel with 20 to 25% anhydrous alcohol mixed with gasoline and those that use natural gas or original liquid fuel (gasoline or hydrated ethanol). The Brazilian model Fiat Siena, the object of this present scientific investigation, is equipped with a unique electronic central capable of managing the liquid or gaseous fuels. The purpose of this research was to perform a comparative analysis in terms of performance (in terms of both potency and consumption) of a tetra-fuel vehicle - using a chassis dynamometer, operating with different fuels: common gasoline, premium gasoline, Podium gasoline, ethanol or natural gas. It became necessary to develop a bench of tests and trials procedures, as well as to know the functioning of the electronic management of the vehicle under analysis. The experiments were performed at the automotive laboratory in CTGAS-ER (Center of Gas Technologies and Renewable energies) at the light of Brazilian standard ABNT, NBR 7024: Light on-road vehicles - measurement of fuel consumption. The essay results on specific fuel consumption using common gasoline, premium gasoline and Podium gasoline have shown similar results, both for urban and road driving cycles