Testes bioquímicos para avaliação do vigor em sementes de Mimosa caesalpiniaefolia Benth

Mimosa caesalpiniaefolia Benth. is a forest species of the Mimosaceae family, recommended for recovery of degraded areas. The evaluation of vigor by biochemical tests have been an important tool in the control of seed quality programs, and the electrical conductivity and potassium leaching the most efficient in the verifying the physiological potential. The objective, therefore, to adjust the methodology of the electrical conductivity test for seeds of M. caesalpiniaefolia, for then compare the efficiency of this test with the potassium in the evaluation of seed vigor of different lots of seeds M. caesalpiniaefolia. To test the adequacy of the electrical conductivity were used different combinations of temperatures , 25 °C and 30 ºC, number of seeds , 25 and 50, periods of imbibition , 4 , 8 , 12 , 16 and 24 hours , and volumes deionized water, 50 mL and 75mL. For potassium leaching test, which was conducted from the results achieved by the methodology of the adequacy of the electrical conductivity test, to compare the efficiency of both tests , in the classification of seeds at different levels of vigor, and the period 4 hours also evaluated because the potassium leaching test can be more efficient in the shortest time . The best combination obtained in experiment of electrical conductivity is 25 seeds soaked in 50 mL deionized or distilled water for 8 hours at a temperature of 30 ° C. Data were subjected to analysis of variance, the means were compared with each other by F tests and Tukey at 5 % probability, and when necessary polynomial regression analysis was performed. The electrical conductivity test performed at period eight hour proved to be more efficient in the separation of seed lots M. caesalpiniaefolia at different levels of vigor compared to the potassium test

O desafio constitucional da distribuição dos royalties de petróleo da bacia pré-sal para promoção de políticas públicas

The administrative model of the Brazilian State, based on regulation, strives, with the application of the efficiency principle and assessment of economical costs, to give a greater effectiveness to fundamental rights by implementing public policies.The objective of this work is to analyze the role of Oil royalties in the context of the Brazilian State, considering that, being an income gap, they might work as a device that promotes intra/intergenerational justice. By means of a correct and efficient distribution and application in the national region, the royalties constitute financial resources available for implementing public policies that intend to guarantee the fundamental rights; above all, with the discovery of the Pre-salt basin and the indisputable rise in the tax revenues arising from Oil exploration. In the making of this work, the theoretical-descriptive methodology is observed, grounded in a critical-reflexive analysis about Constitutional Law and Oil Law. This work analyzes the administrative model of the Brazilian State, the theory of costs of fundamental rights and the theoretical aspects about royalties, such as: the ethical and economical fundamentals, the distribution and destination of revenues, considering the oil exploration scenario before and after the discovery of the pre-salt basin. it is verified, with the present work, the importance of the creation of a new regulatory framework, and consequently the creation of a sovereign wealth fund, which arises to re-evaluate the application of the current norms of Oil revenue distribution. Still, it is imperative that the mechanisms for controlling the application of royalties are defined in detail, so that those can fully admit the objectives of intra/intergenerational justice. Furthermore, it is emphasized that this process should develop from the efficiency principle viewpoint, as well as the principle of reducing social and regional differences, given that the Oil revenues might be used to ensure fundamental social rights, by implementing public policies that are aligned with the development recommended by the Federal Constitution

Responsabilidade civil como função social na distribuição e revenda de combustível face ao direito do consumidor e ao meio ambiente

The civil liability of the distribution and retail fuel stems from the fact business activity developed to be high risk and can be said as risk inherent or latent danger that has predictability and normality characterized by placing the consumer in a position of vulnerability, such as the environment, both public policies defined and constitutional protection. Consumer protection as a fundamental right and the environment as the primacy of social order aims the welfare and social justice, as inserted right to the third dimension, are guarded by the State when it creates operational standards through public policies and indirectly intervenes in the economic order. This intervention is due to consumer protection and the environment are economic order principles, founded on free initiative and free competition, ensuring everyone a dignified existence which underlies the irradiation of fundamental rights in private initiative, before the commercial evaluation, mass consumption, the emergence of new technologies that link consumers to the environment before the protection of life, health and safety and ensuring a better quality of life for present and future generations. To repair this damage and the right to information are provided as fundamental rights that put the person at the epicenter of the relations and collective interest stands out against individual interests that to be done need public-private partnership. In such a way that the used methodology was an analysis of documents correlating them with bibliographic sources whose goals are to recognize the civil responsibility as limit to subjective right, having to develop a social function where guilt and risk grow distant and the damage is configured as a consequence of inherent risk, requiring the State interventional postures in fulfilling its public policy; prevailing in these risky activities the solidarity of those involved in the chain of production and socialization of damage forward those are provided directly of products of hazardous nature that put in a position of vulnerability the environment and the consumer

Avaliação da atividade turística sobre a composição e a distribuição das macroalgas marinhas nos recifes de Pirangi (Rio Grande do Norte, Brasil)

The reef area of Pirangi beach has been experiencing antropogenic actions, mainly due to tourism activity. In order to evaluate these effects, surveys on seaweeds were conducted at nine stations located over the fringing reef. Benthic community (seaweeds/corals) were identified using the photoquadrat method, with 50 meters random transects located paralleled to the coast. The general categories evaluated in each transect were: rock, sand, seaweeds, corals and mollusks. Data achieved were processed at Coral Point Count with Excel Extensions software. A total of 30 seaweed species, 5 coral species and 1 mollusk species were identified. There was a high dominance of short algae at stations with high tourism pressure, whereas frondose algae usually occurred at places without human interference. Seaweeds with the highest percent cover were composed by Sargassum vulgare (59%), Caulerpa racemosa (47%) and Dictyopteris delicatula (33%). Cluster analyses considering benthic organisms revealed five benthic features: (1) submersed area characterized by a diversified marine flora; (2) area with dominance of Caulerpa racemosa and presence of Millepora alcicornis; (3) area with high cover of Sargassum vulgare; (4) trampling area characterized by bare rocks, short algae and Zoanthus sociatus and (5) area with high coverage of Palythoa caribaeroum. Obtained data suggest that the studied area has been damaged by tourism activities. Furthermore, observed differences in algal communities may be a good indicator of ecosystem health of Pirangi reefs

Padrões distintos de congruência climática em duas espécies invasoras de prosopis em zonas semi-áridas da América do Sul

Based on climate data and occurrence records, ecological niche models (ENM) are an important opportunity to identify areas at risk or vulnerable to biological invasion. These models are based on the assumption that there is a match between the climatic characteristic of native and invaded regions predicting the potential distribution of exotic species. Using new methods to measure niche overlap, we chose two exotic species fairly common in semi-arid regions of South America, Prosopis juliflora (Sw.) D.C. and Prosopis pallida (H. ; B. ex. Willd) HBK, to test the climate matching hypothesis. Our results indicate that both species occur with little niche overlap in the native region while the inverse pattern is observed in the invaded region on South America, where both species occur with high climatic overlap. Maybe some non-climate factor act limiting the spread of P. pallida on the native range. We believe that a founder effect can explain these similarities between species niche in the invaded region once the seeds planted in Brazil came from a small region on the Native range (Piura in Peru), where both species occur sympatric. Our hypothesis of a founder effect may be evident when we look at the differences between the predictions of the models built in the native and invaded ranges. Furthermore, our results indicate that P. juliflora shows high levels of climate matching between native and invaded ranges. However, conclusions about climate matching of P. pallida should be taken with caution. Our models based on climatic variables provide multiple locations suitable for occurrence of both species in regions where they still don t have occurrence records, including places of high interest for conservation.

Caracterização ecofisiológica de sementes de espécies lenhosas da Caatinga

Dormancy is an inherent property of the seeds that define the environmental conditions in which they are able to germinate and their presence is an adaptive trait common in species inhabiting semiarid regions. Moreover, the ability of seedling establishment in these environments has been related to the size, strength and chemical characteristics of the seeds. This study investigated patterns of dormancy and germination speed in tree species of the Caatinga, exploring how the seed size influence the processes of germination, seedling size and biomass allocation. In addition, we aim to investigate the chemical characteristics of the reserves, to verify a possible relationship between nutritional content and the process of seed germination. Therefore, seeds were collected from ten species of woody Caatinga for tests of breaking dormancy, germination and biochemical characterization. Overall, the results show that the scarification treatments mechanical and chemical, and thermal shock influenced the percentage and speed of germination in 50 % of the species, suggesting that they have some level of physical dormancy in the seeds. Biochemical characterization showed the existence of large amounts of carbohydrates in the seeds of all species, low proportion of protein and low amounts of neutral lipids. Using linear regression, we demonstrated the existence of a significant relationship between seed size and the ratio of root/shoot where the largest seeds invested a greater amount of resources for shoot growth. The relationship between germination speed and non-reducing sugar content was also significant, so these compounds is related to the maintenance of physiological seed quality. These results confirm some relationships discussed in the literature for cultivated species, but can be applied to the species native to the Caatinga

Histórias de idosos: sementes para cultivarmos uam educação para uma velhice bem-sucedida

We understand that the successful old age is not confined only in the analysis of quantitative aspects concerning the economic situation of the subject that gets old, but this special way of aging is related to other values, such as dignity, happiness, self-esteem, willingness, autonomy, independence, social involvement with family and friends, among others. Thus, this study aimed to investigate the human aging process, considering the history of life of ten seniors who fit the profile of successful old age, seeking to identify elements that contribute to educational thinking in order to get a successful aging. In this perspective, we argue in this study, the idea that we need to learn to engage in experiences that more than providing satisfaction and well-being in the moment in which we conducted, serve as a potentiating to a successful old age. Thus, throughout this thesis we question: what are the present indicative in the histories of life of elderly people, considered successful, which may contribute to an education that people experiencing their age more satisfactorily. This is a qualitative study, that took as universe a methodological oral history, in which we used as a technique of research a semistructured interview as a part of their life history, with emphasis on consideration of the following categories: diary routine, with emphasis on social harmony in the family, at work and in friendship groups of leisure and physical activity, self-knowledge and the learning experiences throughout life. To get the objectives outlined, as well as lectured on the categories analyzed, we support our reflection on the theory of the course of life, which includes human aging as a historical and cultural contextual reality. Our research revealed, among other things, that successful aging is coupled to an active lifestyle, where the involvement in physical activities, recreational and social experiences throughout life is important for increasing self-esteem, autonomy and joy of living, conditions that enable successful old age. Our study also revealed that the educationfor successful old age is linked with the consumption along the life, educational activities which broaden the possibilities of social interaction between people, even among different generations, since the interaction is important to learn and accept our possibilities and limits.

Cadeia produtiva da farinha de mandioca na perspectiva da análise de filière e supply chain management :um estudo de caso das relações entre a agroindústria e a distribuição

This research aims to study the manioc flour productive chain in order to understand how the relationship between its segments happens, specially between the flour agroindustry and the distribuition. This research was made from a study of case that envolved three agro industries from the Potiguar wasteland and a company of food distribution. The filiére and the supply chain management analysis were applied to identify the functioning and the organization of the manioc flour productive chain. From the study of case it s noticed that the existing contracts, even the informal ones, has mutual benefits and it suggests that they be legalized

Algoritmos de otimização para decisões de localização de facilidades e distribuição em sistemas multiníveis de transporte rodoviário de carga

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Um algoritmo para estimação de estado em alimentadores de distribuição de energia elétrica com base no método da soma de potências

Most algorithms for state estimation based on the classical model are just adequate for use in transmission networks. Few algorithms were developed specifically for distribution systems, probably because of the little amount of data available in real time. Most overhead feeders possess just current and voltage measurements at the middle voltage bus-bar at the substation. In this way, classical algorithms are of difficult implementation, even considering off-line acquired data as pseudo-measurements. However, the necessity of automating the operation of distribution networks, mainly in regard to the selectivity of protection systems, as well to implement possibilities of load transfer maneuvers, is changing the network planning policy. In this way, some equipments incorporating telemetry and command modules have been installed in order to improve operational features, and so increasing the amount of measurement data available in real-time in the System Operation Center (SOC). This encourages the development of a state estimator model, involving real-time information and pseudo-measurements of loads, that are built from typical power factors and utilization factors (demand factors) of distribution transformers. This work reports about the development of a new state estimation method, specific for radial distribution systems. The main algorithm of the method is based on the power summation load flow. The estimation is carried out piecewise, section by section of the feeder, going from the substation to the terminal nodes. For each section, a measurement model is built, resulting in a nonlinear overdetermined equations set, whose solution is achieved by the Gaussian normal equation. The estimated variables of a section are used as pseudo-measurements for the next section. In general, a measurement set for a generic section consists of pseudo-measurements of power flows and nodal voltages obtained from the previous section or measurements in real-time, if they exist -, besides pseudomeasurements of injected powers for the power summations, whose functions are the load flow equations, assuming that the network can be represented by its single-phase equivalent. The great advantage of the algorithm is its simplicity and low computational effort. Moreover, the algorithm is very efficient, in regard to the accuracy of the estimated values. Besides the power summation state estimator, this work shows how other algorithms could be adapted to provide state estimation of middle voltage substations and networks, namely Schweppes method and an algorithm based on current proportionality, that is usually adopted for network planning tasks. Both estimators were implemented not only as alternatives for the proposed method, but also looking for getting results that give support for its validation. Once in most cases no power measurement is performed at beginning of the feeder and this is required for implementing the power summation estimations method, a new algorithm for estimating the network variables at the middle voltage bus-bar was also developed

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Determinação de Chaveamento para Recomposição do Serviço em Redes de Distribuição de Energia Elétrica em Média Tensão Através de Métodos Baseado em Parâmetros de Sensibilidade

The reconfiguration of a distribution network is a change in its topology, aiming to provide specific operation conditions of the network, by changing the status of its switches. It can be performed regardless of any system anomaly. The service restoration is a particular case of reconfiguration and should be performed whenever there is a network failure or whenever one or more sections of a feeder have been taken out of service for maintenance. In such cases, loads that are supplied through lines sections that are downstream of portions removed for maintenance may be supplied by the closing of switches to the others feeders. By classical methods of reconfiguration, several switches may be required beyond those used to perform the restoration service. This includes switching feeders in the same substation or for substations that do not have any direct connection to the faulted feeder. These operations can cause discomfort, losses and dissatisfaction among consumers, as well as a negative reputation for the energy company. The purpose of this thesis is to develop a heuristic for reconfiguration of a distribution network, upon the occurrence of a failure in this network, making the switching only for feeders directly involved in this specific failed segment, considering that the switching applied is related exclusively to the isolation of failed sections and bars, as well as to supply electricity to the islands generated by the condition, with significant reduction in the number of applications of load flows, due to the use of sensitivity parameters for determining voltages and currents estimated on bars and lines of the feeders directly involved with that failed segment. A comparison between this process and classical methods is performed for different test networks from the literature about networks reconfiguration

Um estimador de estado trifásico para sistemas de distribuição de energia elétrica com base no método da soma de potências

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Um sistema para simular o comportamento de bancos trifásicos de reguladores de tensão usados em sistemas de distribuição de energia elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior