Identificação em tempo real de modelo dinâmico de robô móvel com acionamento diferencial e zona morta

Several mobile robots show non-linear behavior, mainly due friction phenomena between the mechanical parts of the robot or between the robot and the ground. Linear models are efficient in some cases, but it is necessary take the robot non-linearity in consideration when precise displacement and positioning are desired. In this work a parametric model identification procedure for a mobile robot with differential drive that considers the dead-zone in the robot actuators is proposed. The method consists in dividing the system into Hammerstein systems and then uses the key-term separation principle to present the input-output relations which shows the parameters from both linear and non-linear blocks. The parameters are then simultaneously estimated through a recursive least squares algorithm. The results shows that is possible to identify the dead-zone thresholds together with the linear parameters

Controle dinâmico de robôs móveis com acionamento diferencial

This work addresses the dynamic control problem of two-wheeled differentially driven non-holonomic mobile robot. Strategies for robot positioning control and robot orientating control are presented. Such strategies just require information about the robot con¯guration (x, y and teta), which can be collected by an absolute positioning system. The strategies development is related to a change on the controlled variables for such systems, from x, y and teta to s (denoting the robot linear displacement) and teta, and makes use of the polar coordinates representation for the robot kinematic model. Thus, it is possible to obtain a linear representation for the mobile robot dynamic model and to develop such strategies. It is also presented that such strategies allow the use of linear controllers to solve the control problem. It is shown that there is flexibility to choice the linear controller (P, PI, PID, Model Matching techniques, others) to be implemented. This work presents an introduction to mobile robotics and their characteristics followed by the control strategies development and controllers design. Finally, simulated and experimental results are presented and commented

Desgaste de polímeros estruturais de engenharia em contato de deslizamento com cilindro metálico

Present work proposed to map and features the wear mechanisms of structural polymers of engineering derived of the sliding contact with a metallic cylindrical spindle submitted to eccentricity due to fluctuations in it is mass and geometric centers. For this it was projected and makes an experimental apparatus from balancing machine where the cylindrical counterbody was supported in two bearings and the polymeric coupon was situated in a holder with freedom of displacement along counterbody. Thus, the experimental tests were standardized using two position of the two bearings (Fixed or Free) and seven different positions along the counterbody, that permit print different conditions to the stiffness from system. Others parameters as applied normal load, sliding velocity and distance were fixed. In this investigation it was used as coupon two structural polymers of wide quotidian use, PTFE (polytetrafluroethylene) and PEEK (poly-ether-ether-ketone) and the AISI 4140 alloy steel as counterbody. Polymeric materials were characterized by thermal analysis (thermogravimetric, differential scanning calorimetry and dynamic-mechanical), hardness and rays-X diffractometry. While the metallic material was submitted at hardness, mechanical resistance tests and metallographic analysis. During the tribological tests were recorded the heating response with thermometers, yonder overall velocity vibration (VGV) and the acceleration using accelerometers. After tests the wear surface of the coupons were analyzed using a Scanning Electronic Microscopy (SEM) to morphological analysis and spectroscopy EDS to microanalysis. Moreover the roughness of the counterbody was characterized before and after the tribological tests. It was observed that the tribological response of the polymers were different in function of their distinct molecular structure. It were identified the predominant wear mechanisms in each polymer. The VGV of the PTFE was smaller than PEEK, in the condition of minimum stiffness, in function of the higher loss coefficient of that polymer. Wear rate of the PTFE was more of a magnitude order higher than PEEK. With the results was possible developed a correlation between the wear rate and parameter (E/ρ)1/2 (Young modulus, E, density, ρ), proportional at longitudinal elastic wave velocity in the material.

Estudo térmico de um sistema solar de aquecimento de água residencial para duas configurações de superfície absorvedora

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are its low cost and easy manufacturing and assembly. The absorbing surface of the collector is formed by an aluminum plate with eight flaps where they lodge PVC pipes. The catchment area of solar radiation corresponds to 1.3 meters. The collector box was made of wood, is covered by transparent glass and thermal insulation of tire chips and expanded polystyrene (EPS). Absorber tubes were connected in parallel through the use of PVC fittings and fixed to the plate by the use of metal poles and rivets. The entire absorber received paint flat black for better absorption of sunlight. The system worked on a thermosiphon assembly and absorber of the collector has been tested in two configurations: with the tubes facing up, directly exposed to the impact of sunlight and facing down, exchanging heat with the plate by conduction. It was determined the most efficient configuration for the correct purpose. The solar collector was connected to a thermal reservoir, also alternative, low-cost forming the system of solar water heating. We evaluated thermal parameters that proved the viability of the heating system studied

Projeto, construção e análise de eficiência térmica de um sistema de aquecimento solar de água de baixo custo

We studied the feasibility of using a system of Solar Water Heating (SAS) with low cost, for three configurations. In configurations I and II have the collector grid absorber composed of six PVC tubes placed in parallel on the tile cement. In configuration II, the PVC tubes were transparent cover made of plastic bottles. Configuration III uses a collector composed of 12 black HDPE pipes, supported on four cement tiles 2.44 m x 0.50 m, two by two overlapping and interspersed with a filling of glass wool, comprising an area exposed to the global radiation incident of 2.44 m2, with the top two tiles painted matte black. In this configuration, the HDPE pipes replace conventional PVC pipes painted black. The total cost of SAS for configuration III, the most economical, was around $ 150.00. For the configurations tested the system of operation was thermosyphon collector. The study showed that the proposed systems have good thermal efficiency, are easy to install and handle and have low cost compared to conventional.

Análise da viabilidade econômica de um sistema de aquecimento solar de água para uma empresa do setor hoteleiro

This paper presents an analysis of technical and financial feasibility of the use of a solar system for water heating in a fictitious hotel located in the Northeast region. Thereunto it is used techniques of solar collectors´ sizing and methods of financial mathematics, such as Net Present Value (NPV), Internal Rate of Return (IRR) and Payback. It will also be presented a sensitivity analysis to verify which are the factors that impact the viability of the solar heating. Comparative analysis will be used concerning three cities of distinct regions of Brazil: Curitiba, Belém and João Pessoa. The viability of using a solar heating system will be demonstrated to the whole Brazil, especially to the northeast region as it is the most viable for such an application of solar power because of its high levels of solar radiation. Among the cities examined for a future installation of solar heating systems for water heating in the hotel chain, João Pessoa was the one that has proved more viable.

Análise de grafos aplicada a relatos de sonhos: ferramenta diagnóstica objetiva e diferencial para psicose esquizofrênica e bipolar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

A incorporação de preceitos ambientais no sistema de gestão de resíduos sólidos do município de João Câmara - RN Brasil

The reality points to the global environmental sustainability as the only viable option for addressing the crisis at hand. The move towards sustainability calls for the generation / evaluation systems in their direction, through the incorporation of environmental requirements and in line with the National Policy on Solid Waste. Therefore, the proposed research supports the importance of social and environmental vision, complementing the technical view, the system for management of solid waste from East London, which is a municipality that has a system whose inadequacies are configured in environmental risk and health. Therefore, by observing, applying the model of sustainability indicators and content analysis of interviews, this research proposes to investigate the principles of sustainability and social participation are presented and what is the perception of risk about the inadequacies in the system. The results confirmed the hypotheses of the study and draw a picture of worrying data, such as very unfavorable indicators of sustainability, lack of channels of participation, uncommitted investments with the management system, devaluation of the collector of waste and differing perceptions about the risk by making actors act in isolation. This worrying situation is eased by the appearance of a series of elements are configured as opportunities for the integration of environmental principles in the system. And despite the inability of managers to participate in the research system, yet it behaves as an opportunity to implement public policies in the area of solid waste such as: the preparation of the municipal waste, the institutionalization of selective collection and organization of cooperative with the support of companies present in the city and educational institutions as the Federal Institute. The research is an opportunity for the implementation of policies in the area of solid waste and will collaborate with the building instruments for the quality of life of residents, for the socioeconomic conditions of collectors and the move towards a sustainable society

Proteção diferencial de transformadores de potência utilizando a transformada Wavelet

About 10% of faults involving the electrical system occurs in power transformers. Therefore, the protection applied to the power transformers is essential to ensure the continuous operation of this device and the efficiency of the electrical system. Among the protection functions applied to power transformers, the differential protection appears as one of the main schemes, presenting reliable discrimination between internal faults and external faults or inrush currents. However, when using the low frequency components of the differential currents flowing through the transformer, the main difficulty of the conventional methods of differential protection is the delay for detection of the events. However, internal faults, external faults and other disturbances related to the transformer operation present transient and can be appropriately detected by the wavelet transform. In this paper is proposed the development of a wavelet-based differential protection for detection and identification of external faults to the transformer, internal faults, and transformer energizing by using the wavelet coefficient energy of the differential currents. The obtained results reveal the advantages of using of the wavelet transform in the differential protection compared to conventional protection, since it provides reliability and speed in detection of these events.

Técnica para segmentação automática de imagens microscópicas de componentes sanguíneos e classificação diferencial de leucócitos baseada em lógica fuzzy

Automatic detection of blood components is an important topic in the field of hematology. The segmentation is an important stage because it allows components to be grouped into common areas and processed separately and leukocyte differential classification enables them to be analyzed separately. With the auto-segmentation and differential classification, this work is contributing to the analysis process of blood components by providing tools that reduce the manual labor and increasing its accuracy and efficiency. Using techniques of digital image processing associated with a generic and automatic fuzzy approach, this work proposes two Fuzzy Inference Systems, defined as I and II, for autosegmentation of blood components and leukocyte differential classification, respectively, in microscopic images smears. Using the Fuzzy Inference System I, the proposed technique performs the segmentation of the image in four regions: the leukocyte’s nucleus and cytoplasm, erythrocyte and plasma area and using the Fuzzy Inference System II and the segmented leukocyte (nucleus and cytoplasm) classify them differentially in five types: basophils, eosinophils, lymphocytes, monocytes and neutrophils. Were used for testing 530 images containing microscopic samples of blood smears with different methods. The images were processed and its accuracy indices and Gold Standards were calculated and compared with the manual results and other results found at literature for the same problems. Regarding segmentation, a technique developed showed percentages of accuracy of 97.31% for leukocytes, 95.39% to erythrocytes and 95.06% for blood plasma. As for the differential classification, the percentage varied between 92.98% and 98.39% for the different leukocyte types. In addition to promoting auto-segmentation and differential classification, the proposed technique also contributes to the definition of new descriptors and the construction of an image database using various processes hematological staining

Uma linguagem para descrição de missões em sistema-de-sistemas

Sistema-de-sistemas (System-of-Systems - SoS) é um tipo emergente de sistema computacional formado por um grupo de sistemas constituintes, que são independentes e heterogêneos e se unem para compor um sistema de larga escala visando alcançar uma missão global. Cada sistema constituinte possui seus próprios objetivos, missões individuais, e colaboram para a realização da missão do SoS, chamada missão global. Existe uma complexidade inerente no conjunto de missões que estão envolvidas em um SoS, esse deve-se principalmente à natureza independente dos sistemas constituintes, que tendem a evoluir independentemente, potencialmente mantidos por organizações distintas, além dos conflitos de interesse que podem surgir com essa evolução. Com isso, torna-se essencial prover uma linguagem bem definida para descrição e avaliação dessas missões, relacionando-as entre si e provendo um documento comum que possa ser utilizado por todas as partes envolvidas. Essa linguagem deve ser capaz de expressar as missões individuais e globais, dando suporte a todos os relacionamentos existentes entre essas missões, além de expressar informações relacionadas a realização dessas missões. O objetivo desse trabalho é apresentar e avaliar uma linguagem para descrição de missões. Visando a definição dessa linguagem, esse trabalho apresenta um mapeamento sistemático acerca dos mecanismos existentes para descrição de missões em SoS, identificando os elementos-chave que compõem a descrição de uma missão nesse contexto. A partir desse mapeamento, propõe-se um modelo conceitual para missões e uma linguagem para descrição de missões. Essa linguagem independe de documentos de arquitetura e outros tipos de modelos de software, visando possibilitar a integração da linguagem de definição de missões em diferentes modelos de desenvolvimento.

Avaliação do acesso aos serviços de reabilitação física para vítimas de acidentes de trânsito: caminhos para melhoria da qualidade do sistema de saúde

The Physical Rehabilitation services (PR) are of fundamental importance in combating the global epidemic of Traffic Accidents (TA). Considering the numerous physical and social consequences of the survivors, quality problems in access to PR are a hazard to recovery of victims. It is necessary to improve the management of quality of services, assessing priority dimensions and intervening in their causes, to ensure rehabilitation available in time and suitable conditions. This study aimed to identify barriers to access to rehabilitation considering the perception of TA victims and professionals. The aim is also to estimate the access to rehabilitation and their associated factors. This is a qualitative and quantitative study of exploratory nature developed in Natal / RN with semi-structured interviews with 19 health professionals and telephone survey to 155 victims of traffic accidents. To explore barriers to access the speeches were transcribed and analyzed using the Alceste software (version 4.9). During the interviews used the following guiding question: “What barriers hinder or prevent access to physical rehabilitation for victims of traffic accidents?”. The names of classes and axes resulting from Alceste was performed by ad hoc query to three external researchers with subsequent consensus of the most representative name of analysis. We conducted multivariate analysis of the influence of the variables of the accident, sociodemographic, clinical and assistance on access to rehabilitation. Associations with p <0.20 in the bivariate analysis were submitted to logistic regression, step by step, with p <0.05 and confidence interval (CI) of 95%. The main barriers identified were: “Bureaucratic regulation”, “Long time to start rehabilitation”, “No post-surgery referral” and “inefficiency of public services”. These barriers were divided into a theoretical model built from the cause-effect diagram, in which we observed that insufficient access to rehabilitation is the product of causes related to organizational structure, work processes, professional and patients. Was constructed two logistic regression models: “General access to rehabilitation” and “Access to rehabilitation to public service”. 51.6% of patients had access to rehabilitation, and 32.9% in public and 17.9% in the private sector. The regression model “General access to rehabilitation” included the variables Income (OR:3.7), Informal Employment (OR:0.11), Unemployment (OR:0.15), Perceived Need for PR (OR:10) and Referral (OR: 27.5). The model “Access to rehabilitation in the public service” was represented by the “Referral to Public Service” (OR: 23.0) and “Private Health Plan” (OR: 0.07). Despite the known influence of social determinants on access to health services, a situation difficult to control by the public administration, this study found that the organizational and bureaucratic procedures established in health care greatly determine access to rehabilitation. Access difficulties show the seriousness of the problem and the factors suggest the need for improvements in comprehensive care for TA survivors and avoid unnecessary prolongation of the suffering of the victims of this epidemic.

Registro global de nuvens de pontos RGB-D em tempo real usando fluxo óptico e marcadores

Registration of point clouds captured by depth sensors is an important task in 3D reconstruction applications based on computer vision. In many applications with strict performance requirements, the registration should be executed not only with precision, but also in the same frequency as data is acquired by the sensor. This thesis proposes theuse of the pyramidal sparse optical flow algorithm to incrementally register point clouds captured by RGB-D sensors (e.g. Microsoft Kinect) in real time. The accumulated errorinherent to the process is posteriorly minimized by utilizing a marker and pose graph optimization. Experimental results gathered by processing several RGB-D datasets validatethe system proposed by this thesis in visual odometry and simultaneous localization and mapping (SLAM) applications.

Proposta de um sistema de avaliação de desempenho para o Restaurante Universitário da UFRN

The aim of this study was to propose a Performance Evaluation System for outsourced employees of the University Restaurant of the Federal University of Rio Grande do Norte to supply the lack of evaluative instruments. According to Provision of Services Contract nº050/2010 and nº055/2011 of FURN with SAFE LOCAÇÃO DE MÃO DE OBRA LTDA ME, it is the hired company to promote periodic functional performance evaluation of the outsourced employees, but this is not done. The performance evaluation process serves to evaluate if the employees are making their tasks according to the organizations’ objectives and goals, besides that helps to find service failures and capacity of employees demands, thus contributing to improve work conditions and the global performance of the organizations. To elaborate the proposal of evaluation, it was chosen an action research with the participation of all stakeholders, employees and managers from UR. On data collect, first, outsourced employees and management servers were interviewed, in order to raise existing perceptions about performance evaluation aspects. From these data and the work routine observation, a proposal of performance evaluation was elaborated, that was appreciated, criticized and adjusted by the actors involved (employees and managers) to the final formulation of the instrument. This study also presents the necessary steps to the implementation of the Performance Evaluation System. The proposed Performance Evaluation System can be applied to the FURN assuming this process, after modification of contract terms and the approval by the ADCON. It also can serve as an example to others units that works with the provision of outsourced services, enabling so the performance evaluation to be part of the management policy of all people working in FURN.

Análise proteômica de Chromobacterium violaceum: acúmulo estacionário e diferencial após exposição à luz UVC

Chromobacterium violaceum is a free-living bacillus, Gram-negative commonly found in water and sand of tropical and subtropical regions. One of its main characteristic it's the ability to produce the purple pigment named violacein, that shows countless biological activities. In 2003, the genome of this organism was totally sequenced and revealed important informations about the physiology of this bacteria. However, few post-genomics studies had been accomplished. This work evaluated the protein profile of C. violaceum cultivated in LB medium at 28ºC that allowed the identification and characterization of proteins related to a possible secretion system that wasn't identified and characterized yet in C. violaceum, to the quorum sensing system, to regulatory process of transcription and translation, stress adaptation and biotechnological potential. Moreover, the response of the bacteria to UVC radiation was evaluated. The comparison of the protein profile, analyzed through 2-D electrophoresis, of the control group versus the treatment group allowed the identification of 52 proteins that arose after stress induction. The obtained results enable the elaboration of a stress response pathway in C. violaceum generated by the UVC light. This pathway, that seems to be a general stress response, involves the expression of proteins related to cellular division, purine and pirimidine metabolism, heat chock or chaperones, energy supply, regulation of biofilm formation, transport, regulation of lytic cycle of bacteriophages, besides proteins that show undefined function. Despite the response present similarities with the classic SOS response of E. coli, we still cannot assert that C. violaceum shows a SOS-like response, mainly due to the absence of characterization of a LexA-like protein in this organism