Geoquímica de elementos maiores e traços de granitoides neoproterozoicos da província Borborema e sua correlação com propriedades físicas de rochas

This paper discusses the correlation of thermal conductivity, density and magnetic susceptibility with composition of major and trace elements of Neoproterozoic igneous bodies from Borborema Province, Northeastern Brazil. These properties were used as potential markers among the studied magmatic suites. For the correlation between petrophysical and geochemical properties it was considered a set of 195 chemical analyzes of granitoid rocks, separated by the degree of acidity in basic, intermediate and acidic. Major (SiO2, Al2O3, Fe2O3, MgO, CaO, Na2O, K2O and TiO2) and some trace elements (Rb, Sr, Ba, Zr, Th and U) that are usually linked to the formation of the most common minerals of igneous rocks were used. The results show that SiO2 has the best positive correlation with the thermal conductivity, while Al2O3, CaO, Fe2O3, MgO and TiO2 exhibit negative correlation for the same property. The correlation with density is opposite to that one for these oxides with the thermal conductivity. The magnetic susceptibility did not correlate with the elements studied. The results for thermal conductivity and density indicate a tendency of SiO2 and oxides with higher affinity with mafic minerals (Al2O3, CaO, Fe2O3, TiO2 and MgO) in controlling these petrophysical parameters. The set of samples was divided into five different magmatic suites based on their lithogeochemical aspects into: i) peralkaline / alkaline; ii) alkaline; iii) calc-alkaline; iv) high potassium calcium alkaline; and v) shoshonitic. Data analysis showed that the thermal conductivity and density presented good results in the individualization of these suites, notably between peralkaline / alkaline, alkaline suites, calc-alkaline and shoshonitic. However, the high-K calc-alkaline suite overlapped with the other. In contrast, the magnetic susceptibility did not show effective results for separating the five chemical suites.

Análise de microestrutura e de características geotécnicas de misturas de resíduo de polimento de porcelanato e solo

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

Análise de microestrutura e de características geotécnicas de misturas de resíduo de polimento de porcelanato e solo

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

Reserva extrativista Acaú-Goiana: tragédia comum ou decisão coletiva?

In recent years we have observed, in Brazil, the expansion of democratic spaces, providing the use of participatory management strategies in common-pool areas. However, the existence of a co-management model does not guarantee its practice, neither that it will prevent the depletion of common features characterizing the tragedy proposed by Hardin. In this work we analysed the management of Acaú-Goiana RESEX which is located in the cities of Acaú (PB) and Goiana (PE), eight years after its legal creation. We evaluated how much the users of RESEX possess information (even if non formalized) regarding the common use of area and whether they exhibit collectivist values. We used as an interpretative tool the facilitators principles of common resource management (PGRC) identified by Elinor Ostrom and the questionnaire of human values proposed by Schwartz. The human values questionnaire was applied to 240 individuals, half beneficiary and the other half non-beneficiary, only the beneficiaries were submitted to the questionnaire of PGRC. Interviews were conducted in the period of May to September 2014. We tested three hypotheses: 1) The degree of dependence from RESEX resources will play an important role on indirect knowledge of the PGRC; 2) the inclusion of individuals in a communal area (RESEX) increases collectivists values; 3) higher collectivist value rates increases knowledge of PGRC. To this end, we defined levels of socio-economic dependence of RESEX resources, knowledge of PGRC and individual values. GLM statistic analysis of mean comparison and correlation were employed. Our results showed that the knowledge on six of the seven items analyzed in the basic principles (PGRC) is still low. The extended land area and the high number of users may be exerting a detrimental effect on the development of a co-management. Contrary to expected, it was not the dependency who influenced knowledge on the PGRC, but the time spent in contact with the RESEX. This indicates that direct contact with the environment, not the dependence of it, that raises awareness about PGRC. According to our hypothesis, individuals with collectivist values showed greater knowledge of PGRC and reduced hours of work within the RESEX, indicating a greater tendency of individuals refrain their use of the common resource. Individualistic values correlated with less knowledge of a PGRC. Among the beneficiaries, individuals with higher individualistic values had higher monthly income, while among non-beneficiaries there was no such correlation, demonstrating the economic advantages of individualism (free-riding) in situations of non-private use of resources. Our data emphasize the importance of guiding the main actors in the development of a co-participatory management in the direction of the basic principles, and to develop collectivist values among users of a common good can raise awareness of these principles.

Formação profissional do cuidador de idosos em instituições de longa permanência

The old caretaker's work seeks to minimize suffering and morbidity resulting from physical, cognitive and emotional limitations of these individuals, being a practice permeated by the uniqueness of the subjects involved, therefore, a process in constant construction. In this notion, the caregiver's role is crucial to assist the elderly in everyday life, aiming at improving their quality of life. This study has descriptive and analytical character with quantitative and qualitative approach aimed to investigate the professional training of active caregivers in long-term stay institutions for the Elderly (ILPIs) in Natal/RN in the year 2014. For this, semi-structured interviews were conducted with 63 caregivers employed in nine ILPIs, representing 75% of the professionals performing activities in these institutions. The interviews captured data on the socioeconomic profile, the perception about the profession and training of caregivers. Data were analyzed by observation of absolute and relative measures of central tendency of the numeric variables frequencies. It was found that most caregivers had poor socioeconomic status and had no specific training course to practice caregiver role. However, among those who carried out courses, most reported that the content covered during the training gave security to perform the practice, although they have shown a contradiction when referred to the need to build capacity. The perception of care is mainly related to love and care for the other while the choice of profession is associated with care practice itself. The results also indicate the presence of a low level of formal training for the exercise of the occupation, also revealing the weaknesses ranging from the absence of a core curriculum that can guide the formation, compounded by the low educational professionals in focus.

Responsabilidade social: visões e perspectivas de empresários do segmento industrial do Rio Grande do Norte

The theme Corporate Social Responsibility is relatively recent both in the academic field and in the business practice. Because of the lack of socialization of experiences and precision of concepts, there are gaps regarding the understanding of the subject and, also, how to conduct operations. This study just seeks to investigate such matter, focusing applications of social responsibility in business. It takes, as empirical field, winners of the PSQT - SESI Prize of Quality at Work in Rio Grande do Norte (2002-2007) in order to systematize the various approaches on the issue, aiming to reveal subjective visions and perspectives of the theme. It is characterized as a qualitative study, carried out by structured interview. The universe was composed by 15 companies. It was used analysis of content categorical as an axis for the interpretation of the information. Three approaches guided the analysis: Business Ethics, (normative); Business & Society (contractual); Social Issues Management (strategic). The findings are related in three ways: 1) reasons for the CSR practice; 2) the results obtained; 3) the means of CSR. It was found that the award participation occurs, mostly, linked to SESI invitations, so, as an articulated movement of industrial corporations in Brazil it occurs, also, because of the organizational commitment with the society and the possibility of internal and social growths and because of the importance attributed to the report as an instrument of consultancy. There are no indicators to check impacts of organizational interventions, in spite of the existence of planning for the actions. Social responsibility appears as a tool to reinforce the organizational image and to increase satisfaction of the employees. There is a tendency of large and medium firms to a contractual commitment while the small and the micros firms are on strategic or normative level. The analysis of the perspectives of social responsibility future revealed trends towards for strategic approach

Estudo da incorporação da cal em composições binárias de solo-cimento para produção de tijolos maciços

The use of binders in the soil for the production of solid bricks is an old construction technique that has been used by several civilizations over time. At the same time, the need for environmental preservation and the tendency of scarcity of natural resources make the construction invest in researching new concepts, methods and materials for building systems for the sustainability of their economic activities. Thus arises the need to obtain building materials with low power consumption, capable of reducing the growing housing shortage of rural and urban population. Currently, research has been conducted on this topic to better understand the cementitious and pozzolanic reactions that occur in the formation of the microstructure of the soil-cement when added to other materials such as, for example, lime, and the relationship between microstructure and formed interfaces with the physical, mechanical and chemical analysis in compounds made from these ternary compositions. In this context, this study aimed to analyze the results of the influence of the incorporation of lime to the soil-cement to form a ternary mixture to produce soil-cement bricks and mortar without structural purposes. From the inclusion of contents of 6 %, 8 %, 10% and 12% lime to the soil, and soil-cement mixes in amounts of 2 %, 3 %, 4 % and 5 % were shaped-bodies of -cylindrical specimens to determine the optimum moisture content and maximum dry apparent specific weight. Then they were cured, and subjected to the tests of compressive strength, absorption and durability modified. Compositions obtained the best results in the tests performed on the bodies-of-proof cylindrical served as a parameter for molding of solid bricks, which underwent the same experimental methodology previously cited. The raw materials used, as well as compositions in which the bricks were molded solid, were characterized by physical and chemical tests, X-ray diffraction and scanning electron microscopy. The results obtained in the study indicate that the compositions studied, that showed the best results in terms of compressive strength, water absorption and durability ternary composition was soil, 10 % cement and 2 % lime