133 resultados para Planejamento das necessidades de materiais
Resumo:
Ferroelectric ceramics with perovskite structure (ABO3) are widely used in solid state memories (FeRAM’s and DRAM's) as well as multilayered capacitors, especially as a thin films. When doped with zirconium ions, BaTiO3-based materials form a solid solution known as barium zirconate titanate (BaTi1-xZrxO3). Also called BZT, this material can undergo significant changes in their electrical properties for a small variation of zirconium content in the crystal lattice. The present work is the study of the effects of deposition parameters of BaTi0,75Zr0,25O3 thin films by spin-coating method on their morphology and physical properties, through an experimental design of the Box-Behnken type. The resin used in the process has been synthesized by the polymeric precursor method (Pechini) and subsequently split into three portions each of which has its viscosity adjusted to 10, 20 and 30 mPa∙s by means of a rotary viscometer. The resins were then deposited on Pt/Ti/SiO2/Si substrates by spin-coating method on 15 different combinations of viscosity, spin speed (3000, 5500 and 8000 rpm) and the number of deposited layers (5, 8 and 11 layers) and then calcined at 800 ° C for 1 h. The phase composition of the films was analyzed by X-ray diffraction (XRD) and indexed with the JCPDS 36-0019. Surface morphology and grain size were observed by atomic force microscopy (AFM) indicating uniform films and average grain size around 40 nm. Images of the cross section of the films were obtained by scanning electron microscopy field emission (SEM-FEG), indicating very uniform thicknesses ranging from 140-700 nm between samples. Capacitance measurements were performed at room temperature using an impedance analyzer. The films presented dielectric constant values of 55-305 at 100kHz and low dielectric loss. The design indicated no significant interaction effects between the deposition parameters on the thickness of the films. The response surface methodology enabled better observes the simultaneous effect of variables.
Resumo:
SANTOS, Raimunda Fernanda dos; SILVA, Eliane Ferreira da. A importância da Arquitetura da Informação no planejamento de ambientes digitais inclusivos.In: SEMINÁRIO DE PESQUISA DO CENTRO DE CIÊNCIAS SOCIAIS APLICADAS,17.,2012,Natal/RN. Anais... Natal/RN: Centro de Ciências Sociais Aplicadas, 2012. Trabalho oral.
Resumo:
In the ceramics industry are becoming more predominantly inorganic nature pigments. Studies in this area allow you to develop pigments with more advanced properties and qualities to be used in the industrial context. Studies on synthesis and characterization of cobalt aluminate has been widely researched, cobalt aluminate behavior at different temperatures of calcinations, highlighting especially the temperatures of 700, 800 and 900° C that served as a basis in the development of this study, using the method of polymerization of complex (CPM), economic, and this method applied in ceramic pigment synthesis. The procedure was developed from a fractional factorial design 2 (5-2) in order to optimize the process of realization of the cobalt aluminate (CoAl2O4), having as response surfaces the batch analysis data of Uv-vis spectroscopy conducted from the statistic software 7.0, for this were chosen five factors as input variables: citric acid (stoichiometric manner), puff or pyrolysis time (h), temperature (° C), and calcinations (° C/min), at levels determined for this study. By applying statistics in the process of obtaining the CoAl2O4 is possible the study of these factors and which may have greater influence in getting the synthesis. The pigments characterized TG/DSC analyses, and x-ray diffraction (XRD) and scanning electron microscope (SEM/EDS) in order to establish the structural and morphological aspects of pigment CoAl2O4, among the factors studied it were found to statically with increasing calcinations temperature 700°< 800 <900 °C, the bands of Uv-vis decrease with increasing intensity of absorbance and that with increasing time of puff or pyrolysis (h) there is an increase in bands of Uv-vis proportionally, the generated model set for the conditions proposed in this study because the coefficient of determination can explain about 99.9% of the variance (R²), response surfaces generated were satisfactory, so it s possible applicability in the ceramics industry of pigments
Resumo:
Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%
Resumo:
The environmental impact caused by the disposal of non-biodegradable polymer packaging on the environment, as well as the high price and scarcity of oil, caused increase of searches in the area of biodegradable polymers from renewable resources were developed. The poly (lactic acid) (PLA) is a promising polymer in the market, with a large availability of raw material for the production of its monomer, as well as good processability. The aimed of this study was synthesis PLA by direct polycondesation of lactic acid, using the tool of experimental design (DOE) (central composite rotatable design (CCRD)) to optimize the conditions of synthesis. The polymer obtained was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), viscosimetric analysis, differential scanning calorimeter (DSC) and size exclusion chromatography (SEC). The results confirmed the formation of a poly (lactic acid) semicrystalline in the syntheses performed. Through the central composite rotatable design was possible to optimize the crystallization temperature (Tc) and crystallinity degree (Xc). The crystallization temperature maximum was found for percentage of catalyst around the central point (0,3 (%W)) and values of time ranging from the central point (6h) to the upper level (+1) (8h). The crystallization temperature maximum was found for the total synthesis time of 4h (-1) and percentage of catalyst 0,1(W%) (-1). The results of size exclusion chromatography (SEC) showed higher molecular weights to 0,3 (W%) percent of catalyst and total time synthesis of 3,2h
Resumo:
Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations
Resumo:
Dutra, R. P. S.; Varela,M. L.; Nascimento, R. M. ; Gomes, U. U. ; Martinelli1, A. E. ; Paskocimas, C. A. Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilosa. Cerâmica [online]. 2009, vol.55, n.333, pp. 100-105. ISSN 0366-6913. doi:Disponivem em:
Resumo:
SANTOS, Christiane Gomes; ALMEIDA, Edson Marques. Estudo do usuário com deficiência visual: um importante instrumento sócio-inclusivo de pesquisa e formação para o profissional de biblioteconomia perante as necessidades informacionais de pessoas com deficiência. In: SEMINÁRIO DE PESQUISA DO CCSA, 16., 2010, Rio Grande do Norte. Anais eletrônicos... Natal: UFRN, 2010. Disponível em:
Resumo:
O modelo civilizatório da sociedade global fundamenta-se na produção à larga escala e no aumento exponencial e diversificado do consumo. Este modelo impacta o meio ambiente já que demanda grandes quantidades de recursos naturais e provoca contaminação ambiental. No leque desta contaminação, a geração de resíduos sólidos surge como uma das principais devido a seus efeitos nocivos serem sentidos de forma imediata pelas pessoas. Em países como o Brasil, uma das soluções requeridas para se minimizar e/ou equacionar a problemática engendrada pelos resíduos sólidos é a reciclagem dos materiais. A justificativa oficial pelo esforço à reciclagem está nas características da atividade já que o uso de materiais reciclados reduz a demanda por recursos naturais em processos produtivos industriais, aumenta o tempo de vida útil dos aterros sanitários (local de destino final dos resíduos), além de gerar emprego e renda para os catadores, sujeitos que sobrevivem da coleta e separação dos materiais recicláveis. A partir de uma ética ambiental, a pergunta que deve ser feita quando nos propomos a analisar as implicações da geração dos resíduos é: por que a sociedade global gera resíduos sólidos de maneira acentuada? Contudo, à luz dos pressupostos mercadológicos do capitalismo, a pergunta que move as discussões acerca da problemática dos resíduos sólidos é: o que fazer com a crescente geração de resíduos sólidos? O presente artigo se propõe a uma reflexão dos elementos justificativos dessa ode à reciclagem. Em nossa perspectiva, a reciclagem fomenta ao que denominamos de ambientalismo econômico, no qual o discurso pró-reciclagem se apropria dos elementos e potencialidades ambientais da atividade da reciclagem para justificar as ações de caráter econômico no que se refere ao que fazer com os resíduos gerados diariamente.
Resumo:
O mundo atual passa por uma crise ambiental sem precedentes na história, o que resulta em conseqüências ambientais perceptíveis e preocupantes. Governos e organizações internacionais têm dado maior relevância à variável ambiental como um dos principais eixos de definição das políticas de crescimento/desenvolvimento econômico, como o intuito de adequar as demandas sociais aos limites naturais. Como consequências dessa forma perdulária de produção e consumo da sociedade global temos a contaminação ambiental ampliada e diversificada. O presente artigo discute a acumulação capitalista no setor dos resíduos sólidos, partindo da hipótese da impossibilidade de se diminuir a geração ampliada dos resíduos, sendo necessário que se crie estratégias de gestão e tratamento para os resíduos baseados na atividade da reciclagem dos materiais. A parte final expõe os paradigmas da questão dos resíduos sólidos na sociedade global.
Resumo:
The inclusion of the dentist in the Family Health Program (FHP) teams designates a reorganization of the mouth health care in your country and establishes a new scenario in Brazilian odontology, through of a new way to organize the basic health care, creating conditions to consolidate in mouth health practice actions, in the level of the basic attention, the validation of Unique Health System (UHS) constitutional principles. The purpose of this research is to verify if the actuation of mouth health teams (MHT) dentists, in Natal city north sanitary district, is tuned with FHP goals.The target research population was composed by all dentists working in Basic Health Units (BHU) of Natal north sanitary district. Fifth-eight questionnaires were applied and using open and closed questions we look for identify the functional characteristics of each BHU, the dentists professional attributions on each BHU, as well as the clinical procedures that they execute. This research also searched to identify the factors that facilitate and/or difficult the inclusion process and the dentists activities performance on these BHUs, as well as the necessary actions to north sanitary district MHTs to fulfill the objectives proposed by FHP. The results point that the inclusion of mouth health actions in north sanitary district FHPs brought the incorporation of new values to the used practices. Whoever, its necessary a more frequent evaluation of the carried actions, in a way they can be adapted to the real community necessities, and, is fundamental the data accompaniment, for that these serve of base for planning and redirecting activities, in a way that we do not have only a reproduction of traditional practices, fragmented and isolated, but a truly substitution of the traditional practices and a new way of promoting health
Resumo:
To implement policies and plans at the tourist sector involve disposition to the establishment of parceries among government and private initiative, space to the action of studious, researchers and professionals of several areas of knowledge and formation, able of to give new courses no only at the tourism, but to the economy how a every, seen which the tourism had a effect multiplicator, reaching 52 sectors of the economy. At this sense, the Brazil came pruning for a new phase of politic actuation at the touristy activity. Until the year 2002, the tourism politic in the Brazil no had detail, because herself treated of isolated actions and many without continuity. However, at to start 2003, several actions were developed in order to contribute for the national touristy planning. The principal was the creation of Ministério do Turismo, accompanied of the formulation and implementation of the Plano Nacional do Turismo (2003/2007). This work pretend to understand the implementation at the Rio Grande do Norte of the model of participative administration extolled by Plano Nacional do Turismo. The your centre detail the action of the Conselho Estadual de Turismo do Rio Grande do Norte (CONETUR), to promote the participation at the tourism public policies. The bibliographical research contemplated diverse sources in order to compile knowledge of credential authors in the quarrel of inherent subjects to the participation and to the tourism public policies, especially at the Brazil. A qualitative perspective the case study was adapted as research method and for attainment of the data interviews with the members of the Conselho had been carried through beyond consultation the referring documents the dynamics of functioning of the Conselho. The principal actuations of the CONETUR, the directives tourism public policies already made and directed to implementation, the type of participation at made decision, the principal difficulties of the implementation of the participative administration model of the Plano Nacional do Turismo and the degree of participation of the members of the Conselho at the reunions had been identified. The results had shown that exist some difficulties at the implementation of the participation at the Conselho Estadual de Turismo do Rio Grande do Norte, knowledge of the Conselheiros of CONETUR function, the presence of bodies which doesn t directly connected at the touristy activity; the absence of time of the Conselheiros to be presents at reunions; the discontinuity of the presidency of the Conselho; among others. So, the CONETUR show himself how a Conselho with participative characteristics, but with some adapted needs.
Processo de planejamento estratégico em universidade pública: o caso da Universidade Federal do Pará
Resumo:
The goal of this research is to check if the strategic planning developed between 2001 and 2009 into the State University of Para (Universidade Federal do Pará - UFPA) was consolidated into its Academic Centers as a management practice. To this end, we identified the planning formalization degree of the Academic Centers, the conceived tools for the planning, the conception and the methodological process used in the tools elaboration, as also its implementation. The research used a qualitative approach: it is descriptive and it uses the case study technique. The data were gathered from primary and secondary sources, through bibliography, documents, and field researches through semi-structure interviews. The analysis and data interpretation were done by each investigated Academic Center from the analytics categories guided by the specifics goals. We used theoretic fundamental based principles and the university as a study empiric reference based on its structure analysis, organizational processes and institutional strategic plan. We inspected how the strategic planning process was developed throughout the fixed period and how the investigated Academic Centers are from the collected documents and interviews. The theoretical foundation was built from three axis: the Brazilian undergraduate and posgraduate education system; the university itself including its singularity and complexity as an organization; and the planning as a strategic management process. The main results show us that the UFPA has updated regulatory milestones, presenting organizational structure, laws, instructions, manuals and deployed management model that give the strategic planning development conditions beyond its administration, i. e., into its Academic Centers. The centers also present those established milestones and develop the basic planning processes of the institution. Those processes are conceived based on the institutional strategic planning and the managers mainly use the procedural orientation defined by the university management, from where the conceptual foundation is originated and propagated. According to the literature and to the research done in this work, we can conclude that the Academic Centers from the UFPA developed the strategic planning practice. This planning is organized and founded and guided the plans and decisions which avoided the disordered management and, according to the managers, allowed the advances and performance improvement. We can conclude that the UFPA built an important foundation with respect to the management professionalization. On the other hand, we can not conclude that the management practice is consolidated since there are weaknesses into the structuring of the technical teams and there is not any management tool for the implementation of the elaborated plans
Resumo:
This study aims at solidifying the theoretical bases to provide, above all, an explanation for this phenomenon which currently happens, with a scenario of social, political, economic and cultural transformations worldwide in medium cities. Nevertheless, because it has different dimensions from its transformation axes, gentrification comes with change, but also with the introduction of a new purpose in the space using and occupation, outlining in this context the identity of places from the formation of centralities with the presence of flows with social and economic dynamicsThe current forms of geographic space appropriation show the directions of the senses and ideological profile which recreates the meanings and uses of content and materials from descriptions of a historical past. However, today there is an economic context in the urban space which refers to a search of strategies for change, i.e., the acquisition of parameter aimed at meeting the demands of the relationship between capital and labor, which ends up overriding some actions for the specification of the transformation methods within the urban space to be explained by new needs and also by the agents from the value adding to their interests and investments. Thus, we assume that the appreciation/gentrification of urban spaces may or may not result from the building of a public space, since the dialogic structure as a place of political interaction externalize conflicts and disagreements in general; it keeps segregating spaces. As new spaces are transformed, the access to them tends to happen with particular restriction, whereas some places like parks, shopping malls, high-rise and horizontal condos are the scene for major professional and family events. In this context, the gentrification process is used to designate interventions in the urban environment, in certain city spaces which are considered central to public and private investments. A historical place is permitted to be presented as a scenario, a stage full of attractions, through the transformation process. Studying gentrification consists of an analysis of the underlying interests in the transformation of these areas, and especially of the assessment of the interest level in the private sector to partner in order to modify the landscape. Gentrification results from the transformation processes of capital, which influences the efforts and investments application in order to establish and achieve optimal economic growth, focusing on a location socio-culturally centered in the urban space. Thus, the urban social structure develops in the light of some questions that relate not only the cities growth but also environmental conditions it provides in cities like Mossoro, State of Rio Grande do Norte, Brazil 2005 a 2011.
Resumo:
This research studies the relation between city and nature in the urbanity s plans from Natal RN, Brazil, during the 20th century. Investigates and analyses the main documents that bring environmental s ideas inside from the urbanity s plans of Natal; gives the historical and economical situation from the city in each period studied; features the urbanity s plans, using categories of analyses to comprehension of this instruments. Try to contribute in the bigger process of historical rescue of Natal, and stimulates new studies. It was used documental s research, and bibliographic material. It was identified four (04) kinds of plans: the ones that focus in health and aesthetic (1901, 1929, 1935) technology and science (1968), zoning and control (1974, 1984) and environment. The hints founded shows that environmental ideas were put inside of the plans by government demands, especially in 1994 s plan, almost always without popular contribution and without this population get understands its meanings and implications