Um framework conceitual para apoiar a instrumentação da avaliação formativa da aprendizagem em jogos digitais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Conhecimento sobre ergonomia no âmbito acadêmico: um estudo com alunos e professores de odontologia

OBJETIVO: As doenças osteomusculares são as afecções ocupacionais mais prevalentes em cirurgiões-dentistas. Nosso propósito: 1) investigar os conhecimentos, aplicabilidades clínicas dos princípios ergonômicos em discentes e docentes em atividades clínicas de uma universidade pública 2) pesquisar a incidência de sintomatologias dolorosas no pescoço, ombros, parte superior e inferior das costas, cotovelos, quadris, coxas, joelhos, tornozelos e pés no universo de alunos em estágios clínicos. 3) incitar discussões de normas e diretrizes ergonômicas na universidade. MÉTODOS: Esse estudo investigou o universo de alunos matriculados em disciplinas clínicas (148) e respectivos professores (30) do curso de odontologia da Universidade Federal do Rio Grande do Norte, Natal-RN a respeito dos princípios ergonômicos utilizados na rotina clínica. Paralelamente foi pesquisada a incidência de sintomatologia dolorosa nos alunos por intermédio do questionário nórdico e a partir dos resultados foi mensurado o índice de severidade dos sintomas em alunos. The Nordic Musculoskeletal Questionnaire (NMQ) é um instrumento de diagnóstico, proposto para padronizar a mensuração de relatos de sintomas osteomusculares. A análise dos dados foi através do programa SPSS-Statistical Package for the Social Sciences, versão 17.0 realizada analítica e descritivamente, com determinação das médias (x), desvio-padrão para variáveis quantitativas, freqüências simples e relativas para as variáveis categóricas, além da estatística de associação entre grupos (teste t) e a análise de associação do quiquadrado com nível de significância 5% entre as variáveis (Person). As respostas das questões abertas foram codificadas e transformadas em freqüências, descritas posteriormente. RESULTADOS: A aplicabilidade de medidas ergonômicas nas clínicas universitárias não foi evidenciada pelo universo de discentes e docentes. Quanto ao relato de sintomas osteomusculares o sexo feminino foi o mais acometido qualquer que seja o nível acadêmico cursado. As regiões anatômicas de maior grau de severidade de relatos dos sintomas foram: pescoço, parte inferior das costas, punhos, mãos e ombros, com significância etatística p<0,001. CONCLUSÃO: Em função dos achados os autores apresentam um protocolo de intervenção clínica baseado nos determinantes ergonômicos da Associação internacional de ergonomia (EAI) como medida de prevenção da saúde ocupacional dos futuros cirurgiões-dentistas ainda em processo de formação nas clínicas odontológicas das universidades.

Caminhos para a avaliação da formação em odontologia: desenvolvimento, validação e aplicação de critérios

The need for universal access to health and the failure of the pedagogical model centered on the transmission of knowledge has led to changes in the training of health professionals. The objective of this study was to provide a new alternative for evaluating dental students through the development, validation and application of evaluation criteria based on the National Curriculum Guidelines (DCN in Brazil). Therefore, the study was conducted in three phases: development and validation of evaluation criteria of Dentistry courses based on the DCN; a pilot study to verify the applicability of the validated criteria and evaluation of the dentistry courses in the Northeast. In the first stage, a logical model was formulated, allowing for the construction of a criteria matrix, validated by a modified Delphi consensus technique. The validated matrix has the following dimensions: Profile of graduates, health care guidance, teaching and service integration, and pedagogical approach. The pilot study was conducted in five dental courses through a documentary study of the pedagogical project course (PPC), and application of validated questionnaires and interviews with course coordinators. The results of the pilot study indicate the possibility of being verified by means of validated criteria and using different methodological proposals, advances and curricular limitations facing the proposed reorientation of training recommended by DCN. The evaluation of Northeast Dentistry courses was carried out by applying a questionnaire validating a matrix of 30 course coordinators, including public and private institutions. The data were submitted to descriptive analysis, and also tested the difference between means and the correlation between the assessment of the coordinators in the dimensions and sub-dimensions with each other, among the general evaluation of courses and between the following variables: administrative category, time since last curriculum updating, participation in reorienting the training of health professionals programs, ENADE and CPC (Preliminary Concepts of the Course) scores in the year 2013. Positive correlation (p <0.01) was found between the means obtained by the perception of the coordinators in most dimensions, and also between them and the overall performance of the course. There were no significant differences between the coordinators’ perception about course performance and the administrative category (public / private). This difference is slightly higher when the average performance is compared with respect to time due to the last curriculum update, getting better performance in courses with the latest updated curriculum, even with there not 11 being this significant difference between dimensions. Better averages of performance were obtained in courses that do not participate in reorientation programs of professional training, with a significant difference (p<0.05) for the overall score and for all dimensions except the dimensions of teaching-service Integration (p = 0.064). There was no significant correlation between the assessment of coordinators in all dimensions, in the overall assessment or ENADE and CPC scores in 2013. The final instrument proposed in this study is a different alternative assessment for health training of both dentists and other professionals, considering that the DCN providing for the training and graduation of professionals is focused on the health needs of the population, integrated with the SUS (the National Brazilian Health System) and based on student-centered learning.

Educação ambiental como estratégia para inserção da sustentabilidade na formação em odontologia

This thesis proposes environmental education as a strategy for the inclusion of sustainability in the academic education of higher level. The dentistry course has been the object of study, which is justified by the recognition of the need for reflection on environmental issues in the dental academia, initially based on professional experience of the author as a dental surgeon. The aim of this study is to investigate the scientific production of dentistry and its content related to environmental issues, in addition to expanding discussions and reflections on the need to insert environmental education as academic content. With the specific purpose of verifying the amount and analyze the content of scientific articles involving issues related to sustainability in dentistry, Chapter 01 presents research in leading journals portals available on the internet. Works were surveyed where sustainability and related issues were present and placed in a theoretical framework that analyzes the dental service inclusion in the dominant economic model. These procedures are intended to prove the hypothesis that the dental profession does not produce significant scientific content that relates the profession to the environment and sustainability. A literature review was conducted with the statement of dentistry changes from its origins to the front position to the dominant development model and exemplification of the deleterious effects of this model on the environment. In addition, there was a scientific research in journals portals available on the internet and investigated the amount and content of scientific articles involving issues related to sustainability in dentistry. Chapter 02 has the specific purpose of providing content to expand discussions and reflections on the need to insert environmental education in undergraduate courses in dentistry, such as insertion strategy into a new development model guided by sustainability. In this, students questionnaires were given the 8th dentistry course of the period the Federal University of Rio Grande do Norte (UFRN), to be understood environmental perception of learners and were obtained grants for proof of the thesis that environmental education applied dentistry has the potential to make people aware and willing to act practicing and propagating sustainability in their conduct. The overall results indicate little scientific production, as the research and work that relates to dentistry to sustainability and the issues related to the environment have not significantly been present in the syllabus of the undergraduate courses in dentistry, despite the interest shown by survey respondents When such issues are addressed. In this context, it is proposed fostering actions to environmental education, so that dental professionals are engaged in the construction of a new development model based on sustainability, as despite the environmental theme seems to be little explored in the academic and scientific world of dentistry, there interest from students and great potential multiplier for appropriate environmental behavior. After proving the hypothesis that the environment-related content are poorly explored in the academic and scientific world of dentistry, the main conclusions were recognizing the importance of environmental education as an interdisciplinary tool for environmental thematic approach in undergraduate courses dentistry, in addition to implementing this new pedagogical proposal in the professional practice of dentists, given their potential multiplier for environmental knowledge.

A organização da demanda em serviços públicos de saúde bucal: universalidade, eqüidade e integralidade em saúde bucal coletiva

RONCALLI, Angelo Giuseppe. A organização da demanda em serviços públicos de saúde bucal: universalidade, eqüidade e integralidade em Saúde Bucal Coletiva. raçatuba, 2000. 238p. Tese (Doutorado em Odontologia Preventiva e Social). Faculdade de Odontologia, Universidade Estadual Paulista “Júlio de Mesquita Filho”

Influencia do meloxicam sobre a perda ossea alveolar em periodontite experimental: avaliaçao histometrica em ratos

GURGEL, Bruno Cesar de vasconcelos.Influencia do meloxicam sobre a perda ossea alveolar em periodontite experimental: avaliaçao histometrica em ratos. 2003.97f. Dissertaçao (Mestrado) - Universidade Estadual de Campinas. Faculdade de Odontologia de Piracicaba. Piracicaba, 2003. Disponivel em: ://cutter.unicamp.br/document/?code=vtls000293698>. Acesso em: 04 out. 2010.

Saúde bucal no programa de saude da família: o caso do distrito sanitário norte em Natal - RN

The inclusion of the dentist in the Family Health Program (FHP) teams designates a reorganization of the mouth health care in your country and establishes a new scenario in Brazilian odontology, through of a new way to organize the basic health care, creating conditions to consolidate in mouth health practice actions, in the level of the basic attention, the validation of Unique Health System (UHS) constitutional principles. The purpose of this research is to verify if the actuation of mouth health teams (MHT) dentists, in Natal city north sanitary district, is tuned with FHP goals.The target research population was composed by all dentists working in Basic Health Units (BHU) of Natal north sanitary district. Fifth-eight questionnaires were applied and using open and closed questions we look for identify the functional characteristics of each BHU, the dentists professional attributions on each BHU, as well as the clinical procedures that they execute. This research also searched to identify the factors that facilitate and/or difficult the inclusion process and the dentists activities performance on these BHUs, as well as the necessary actions to north sanitary district MHTs to fulfill the objectives proposed by FHP. The results point that the inclusion of mouth health actions in north sanitary district FHPs brought the incorporation of new values to the used practices. Whoever, its necessary a more frequent evaluation of the carried actions, in a way they can be adapted to the real community necessities, and, is fundamental the data accompaniment, for that these serve of base for planning and redirecting activities, in a way that we do not have only a reproduction of traditional practices, fragmented and isolated, but a truly substitution of the traditional practices and a new way of promoting health

Estudo de sistemas vítreos para infiltração em alumina

The system in-Ceram Alumina, produced by VITA, consists in a technique of prepare of a substructure of ceramics to dental crowns. First burning is made in the alumina decanted by slip casting process under a stone die that reproduces the tooth prepared to receive a crown. In a second burning, alumina is infiltrated by vitreous system, giving to this set a high mechanic resistance. In this work, it s made a study of the composition of a new infiltrating material more used nowadays, giving to alumina desirable mechanics proprieties to its using like substructure of support to ceramic s crown used in the market today. The addition of Lanthanum oxide (frit A) and calcium oxide (frit B) was made in attempt to increase the viscosity of LZSA and to reduce fusion temperature. The frits were put over samples of alumina and took to the tubular oven to 1400ºC under vacuum for two groups (groups 1 and 2). For another two groups (groups 3 and 4) it was made a second infiltration, following the same parameters of the first. A fifth group was utilized like group of control where the samples of pure alumina were not submitted to any infiltrating process. Glasses manifested efficient both in quality and results of analysis of mechanic resistance, being perfectly compatible with oral environment in this technical requisite. The groups that made a second infiltration had he best results of fracture toughness, qualify the use in the oral cavity in this technical question. The average of results achieved for mechanic resistance to groups 1, 2, 3, 4 and 5 were respectively 98 MPa, 90 MPa, 144 MPa, 236 MPa and 23 MPa

Estudo da zircônia reforçado com alumina

Ceramics materials have good properties including chemical stability, high hardness and wear resistance. Moreover, due to its fragility, can suffer failure under relatively low levels of tension. Actually zirconia is the material of choice in metal free dental prostheses used in dentistry due its inertia in physiological environment, good bending strength, hardness and fracture toughness. The alumina and mixed tungsten and titanium carbides additions, acting as reinforcement elements in the zirconia matrix, have as their main objective the improvement of mechanical properties of this material. In this work, samples of zirconia, zirconia with 30% wt of alumina and zirconia with 30% wt mixed carbides were analyzed. The samples were sintered by uniaxial hot pressing on 30 MPa pressure, for 1 hour in an argon atmosphere. They were physically characterized by porosity and density measurements, and mechanically by 3-points bending strength and Vickers microhardness. The X-ray diffraction was used for the phase identifications and microstructure was examined by scanning electron microscopy (SEM). The addition of mixed carbides as reinforcement elements in zirconia matrix provides improvements in all properties analyzed in this work. The alumina addition has dropped the zirconia strength, although it caused improvement in other properties

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Protótipo de um microgerador termoelétrico de estado sólido: cogeração a gás

The thermoelectric energy conversion can be performed directly on generators without moving parts, using the principle of SEEBECK effect, obtained in junctions of drivers' thermocouples and most recently in semiconductor junctions type p-n which have increased efficiency of conversion. When termogenerators are exposed to the temperature difference (thermal gradient) eletromotriz a force is generated inducing the appearance of an electric current in the circuit. Thus, it is possible to convert the heat of combustion of a gas through a burner in power, being a thermoelectric generator. The development of infrared burners, using porous ceramic plate, is possible to improve the efficiency of heating, and reduce harmful emissions such as CO, CO2, NOx, etc.. In recent years the meliorate of thermoelectric modules semiconductor (TEG's) has stimulated the development of devices generating and recovery of thermal irreversibility of thermal machines and processes, improving energy efficiency and exergy these systems, especially processes that enable the cogeneration of energy. This work is based on the construction and evaluation of a prototype in a pilot scale, for energy generation to specific applications. The unit uses a fuel gas (LPG) as a primary energy source. The prototype consists of a porous plate burner infrared, an adapter to the module generator, a set of semiconductor modules purchased from Hi-Z Inc. and a heat exchanger to be used as cold source. The prototype was mounted on a test bench, using a system of acquisition of temperature, a system of application of load and instrumentation to assess its functioning and performance. The prototype had an efficiency of chemical conversion of 0.31% for electrical and heat recovery for cogeneration of about 33.2%, resulting in an overall efficiency of 33.51%. The efficiency of energy exergy next shows that the use of primary energy to useful fuel was satisfactory, although the proposed mechanism has also has a low performance due to underuse of the area heated by the small number of modules, as well as a thermal gradient below the ideal informed by the manufacturer, and other factors. The test methodology adopted proved to be suitable for evaluating the prototype

Contribuição ao desenvolvimento de ontologias para processos petroquímicos : estudo de caso em uma planta DEA

In the last decades, the oil, gas and petrochemical industries have registered a series of huge accidents. Influenced by this context, companies have felt the necessity of engaging themselves in processes to protect the external environment, which can be understood as an ecological concern. In the particular case of the nuclear industry, sustainable education and training, which depend too much on the quality and applicability of the knowledge base, have been considered key points on the safely application of this energy source. As a consequence, this research was motivated by the use of the ontology concept as a tool to improve the knowledge management in a refinery, through the representation of a fuel gas sweetening plant, mixing many pieces of information associated with its normal operation mode. In terms of methodology, this research can be classified as an applied and descriptive research, where many pieces of information were analysed, classified and interpreted to create the ontology of a real plant. The DEA plant modeling was performed according to its process flow diagram, piping and instrumentation diagrams, descriptive documents of its normal operation mode, and the list of all the alarms associated to the instruments, which were complemented by a non-structured interview with a specialist in that plant operation. The ontology was verified by comparing its descriptive diagrams with the original plant documents and discussing with other members of the researchers group. All the concepts applied in this research can be expanded to represent other plants in the same refinery or even in other kind of industry. An ontology can be considered a knowledge base that, because of its formal representation nature, can be applied as one of the elements to develop tools to navigate through the plant, simulate its behavior, diagnose faults, among other possibilities

Associação entre as narrativas em saúde bucal e condições socioeconômico-culturais: a dentição como reflexo da desigualdade social

This anthropological study investigates the lived-experience of oral diseases in the context of poverty in Northeast Brazil. During six months in 2004???, ethnographic interviews, narratives and participant-observation with 31 residents of the low-income community, Dendê, located in Fortaleza, Ceará were conducted and analyzed utilizing a hermeneutic-dialetic method. It is revealed that precarious life conditions make prioritizing caretaking a difficult task. Despite suffering tooth pain, seeking a dentist's care is perceived as "a luxury" not a citzens' right. Difficulties in accessing services and poor quality restorations, favor tooth extractions as the most effective intervention. The deterioration of one's oral health is lamented by community members who seek help from popular clinics, politicians and traditional healers. The experience of dental disease differs according to social class, leaves oral scars of inequity, harms self-esteem and inhibits social inclusion. In this context, "treating" the Teeth of Inequity demands that we deepen our comprehension of the social determinants of health, reduce injustice in the access to quality care, remove demoralizing stigmas and empower the community to confront structural forces which affect its life

Pesquisa odontológica no Brasil: características da produção científica no início do século XXI

Dentistry, as a science and field of knowledge, has presented a substantial development in the last decades in the areas of research and education. The aim of this study was to evaluate the Brazilian scientific production in Dentistry, as from their methodological outlining, which characterizes the XXI Century. Five thousand two hundred and three study abstracts were evaluated, comprising works presented in the meetings of the Brazilian Society of Dentistry Research (SBPqO), during the period of 2001 to 2006. The main results identify that, as for the methodology used in the researches, there was a predominance of the studies of an individuate, interventionist and longitudinal nature; of the researches in the areas of Dentistry, Periodontology, Endodontics, Pedodontics and Collective Oral Health and experimental studies about clinical researches or with collective subjects. The inter and multidisciplinarity are pointed out in the outlining of this study, as the triad Education-Health-Research is discussed, so that they transcend in their fields of action, in the direction of the transdisciplinarity. It is concluded that, in the studied period, there was a reasonable and balanced production in Brazilian dental field