91 resultados para Memória : Bioquímica : Processamento


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This masther dissertation presents a contribution to the study of 316L stainless steel sintering aiming to study their behavior in the milling process and the effect of isotherm temperature on the microstructure and mechanical properties. The 316L stainless steel is a widely used alloy for their high corrosion resistance property. However its application is limited by the low wear resistance consequence of its low hardness. In previous work we analyzed the effect of sintering additives as NbC and TaC. This study aims at deepening the understanding of sintering, analyzing the effect of grinding on particle size and microstructure and the effect of heating rate and soaking time on the sintered microstructure and on their microhardness. Were milled 316L powders with NbC at 1, 5 and 24 hours respectively. Particulates were characterized by SEM and . Cylindrical samples height and diameter of 5.0 mm were compacted at 700 MPa. The sintering conditions were: heating rate 5, 10 and 15◦C/min, temperature 1000, 1100, 1200, 1290 and 1300◦C, and soaking times of 30 and 60min. The cooling rate was maintained at 25◦C/min. All samples were sintered in a vacuum furnace. The sintered microstructure were characterized by optical and electron microscopy as well as density and microhardness. It was observed that the milling process has an influence on sintering, as well as temperature. The major effect was caused by firing temperature, followed by the grinding and heating rate. In this case, the highest rates correspond to higher sintering.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research presents an overview of the addition steelwork dust of ceramic shingles in order to contribute to the utilization use of such residue. The ceramic industry perspective in the Brazilian State of Piauí is quite promising. Unlike other productive sectors, the ceramic industry uses basically natural raw materials. Its final products are, in short, the result of transforming clay compounds. These raw materials are composed primarily of aluminum oxide, silicon, iron, sodium, magnesium, end calcium, among others. It was verified that steelwork dust is composed primarily of these same oxides, so that its incorporation in to structural ceramics is a very reasonable idea. Both clay and steelwork powder were characterized by AG, XRF, XRD, TGA and DTA. In addition, steelwork dust samples containing (0%, 5%, 10%, 15%, 20% and 25%) were extruded and burned at 800°C, 850°C, 900°C and 950°C. Then t echnological tests of linear shrinkage, water uptake, apparent porosity, apparent density and flexural strengthwere carried at. The results showed the possibility of using steelwork powder in ceramic shingles until 15% significant improvement in physical and mechanical properties. This behavior shows the possibility of burning at temperatures lower than 850ºC, thus promoting a product final cost reduction

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Currently the search for new materials with properties suitable for specific applications has increased the number of researches that aim to address market needs. The poly (methyl methacrylate) (PMMA) is one of the most important polymers of the family of polyacrylates and polymethacrylates, especially for its unique optical properties and weathering resistance, and exceptional hardness and gloss. The development of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main objective of this work is the development of PMMA/SiO2 composites at different concentrations of SiO2, for new applications as engineering plastics. The composites were produced by extrusion of tubular film, and obtained via solution for application to commercial PMMA plates, and also by injection molding, for improved the abrasion and scratch resistance of PMMA without compromising transparency. The effects of the addition of silica particles in the polymer matrix properties were evaluated by the maximum tensile strength, hardness, abrasion and scratch resistance, in addition to preliminary characterization by torque rheometry and melt flow rate. The results indicated that it is possible to use silica particles in a PMMA matrix, and a higher silica concentration produced an increase of the abrasion and scratch resistance, hardness, and reduced tensile strength

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work studied the immiscible blend of elastomeric poly(methyl methacrylate) (PMMA) with poly(ethylene terephthalate) (PET) bottle grade with and without the use of compatibilizer agent, poly(methyl methacrylate-co-glycidyl methacrylate - co-ethyl acrylate) (MGE). The characterizations of torque rheometry, melt flow index measurement (MFI), measuring the density and the degree of cristallinity by pycnometry, tensile testing, method of work essential fracture (EWF), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were performed in pure polymer and blends PMMA/PET. The rheological results showed evidence of signs of chemical reaction between the epoxy group MGE with the end groups of the PET chains and also to the elastomeric phase of PMMA. The increase in the concentration of PET reduced torque and adding MGE increased the torque of the blend of PMMA/PET. The results of the MFI also show that elastomeric PMMA showed lower flow and thus higher viscosity than PET. In the results of picnometry observed that increasing the percentage of PET resulted in an increase in density and degree crystallinity of the blends PMMA/PET. The tensile test showed that increasing the percentage of PET resulted in an increase in ultimate strength and elastic modulus and decrease in elongation at break. However, in the phase inversion, where the blend showed evidence of a co-continuous morphology and also, with 30% PET dispersed phase and compatibilized with 5% MGE, there were significant results elongation at break compared to elastomeric PMMA. The applicability of the method of essential work of fracture was shown to be possible for most formulations. And it was observed that with increasing elastomeric PMMA in the formulations of the blends there was an improvement in specific amounts of essential work of fracture (We) and a decrease in the values of specific non-essential work of fracture (βWp)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Originally aimed at operational objectives, the continuous measurement of well bottomhole pressure and temperature, recorded by permanent downhole gauges (PDG), finds vast applicability in reservoir management. It contributes for the monitoring of well performance and makes it possible to estimate reservoir parameters on the long term. However, notwithstanding its unquestionable value, data from PDG is characterized by a large noise content. Moreover, the presence of outliers within valid signal measurements seems to be a major problem as well. In this work, the initial treatment of PDG signals is addressed, based on curve smoothing, self-organizing maps and the discrete wavelet transform. Additionally, a system based on the coupling of fuzzy clustering with feed-forward neural networks is proposed for transient detection. The obtained results were considered quite satisfactory for offshore wells and matched real requisites for utilization

Relevância:

20.00% 20.00%

Publicador:

Resumo:

With the growth of energy consumption worldwide, conventional reservoirs, the reservoirs called "easy exploration and production" are not meeting the global energy demand. This has led many researchers to develop projects that will address these needs, companies in the oil sector has invested in techniques that helping in locating and drilling wells. One of the techniques employed in oil exploration process is the reverse time migration (RTM), in English, Reverse Time Migration, which is a method of seismic imaging that produces excellent image of the subsurface. It is algorithm based in calculation on the wave equation. RTM is considered one of the most advanced seismic imaging techniques. The economic value of the oil reserves that require RTM to be localized is very high, this means that the development of these algorithms becomes a competitive differentiator for companies seismic processing. But, it requires great computational power, that it still somehow harms its practical success. The objective of this work is to explore the implementation of this algorithm in unconventional architectures, specifically GPUs using the CUDA by making an analysis of the difficulties in developing the same, as well as the performance of the algorithm in the sequential and parallel version

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Tamoxifen (TX), a drug used in the treatment of breast cancer, may cause hepatic changes in some patients. The consequences of its use on the liver tissues of rats with or without diabetes mellitus (DM) have not been fully explored. The purpose of this multidisciplinary study was to evaluate the correlation between plasma hepatic enzyme levels and the presence of iron overload in the hepatic tissue of female Wistar rats with or without streptozotocin-induced DM and using TX. Female rats were studied in control groups: C-0 (non-drug users), C-V (sorbitol vehicle only) and C-TX (using TX). DM (diabetic non-drug users) and DM-TX (diabetics using TX) were the test groups. Sixty days after induced DM, blood samples were collected for glucose, alanine aminotransferase (ALT), aspartate aminotransferase (AST) alkaline phosphatase (ALP) and bilirubin measures. Hepatic fragments were processed and stained with hematoxylin and eosin (H&E), Masson s trichrome, Perls. The hepatic iron content was quantified by atomic absorption spectrometry. AST, ALT and ALP levels were significantly elevated in the DM and DM-TX groups, with unchanged bilirubin levels. Liver iron overload using Perls stain and atomic absorption spectrometry were observed exclusively in groups C-TX and DM-TX. There was positive correlation between AST, ALT and ALP levels and microscopic hepatic siderosis intensity in group DM-TX. In conclusion, TX administration is associated with liver siderosis in diabetic and non-diabetic rats. In addition, TX induced liver iron overload with unaltered hepatic function in 2 non-diabetic rats and may be a useful tool for investigating the biological control of iron metabolism

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Ce travail s agit du processus d´affirmation de l´identité Fulni-ô et de la mobilisation ethnique du groupe qui sont organisées et maintenues en bénéfice de leurs droits; ceux-ci consistent en la reconnaissance comme indiens devant la société et leurs droits sur le territoire. Le groupe est situé dans la municipalité d´Águas Belas, localisé entre l´ agreste et le sertão de l´état du Pernambuco. Ce sont, en moyenne, 3.676 indiens qui présentent comme signes d´identification ethnique: le Yathê, langue spécifique du groupe qui continue à être utilisée au quotidien; l´Ouricuri, terme qui désigne le rituel qui a lieu pendant le printemps et pendant des périodes spécifiques de l´année; le Toré, danse commune aux indiens du Nordeste. La mémoire et la matière culturelle sont les signes de mobilisation ethnique sélectionnés par les Fulni-ô pour favoriser l´affirmation de leur identité et la protection de leurs droits. Cet aspect sera traité tout au long de ce travail. La mobilisation ethnique est permanente, les Fulni-ô ne cessent d´utiliser des moyens qui peuvent les aider à vivifier leur identité et à protéger l´intégrité de leur territoire. Au travers de la mémoire ou grâce à l´utilisation de signes et de symboles ethniques (comme la langue, le rituel religieux et le Toré) ils consolident l´idée qu´ils sont indiens en même temps qu´ils établissent et défendent leurs frontières ethniques et physiques

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The puppet theater is the theme of this dissertation, with a particular treatment of Memory, Toy and Jokes, focused especially on a Calungueira, maker of dolls, Ieda Maria Medeiros da Silva, known by Dadi. Currently with 71 years old, Dadi resides in Carnauba dos Dantas / RN and not only restricted to "get" the dolls to play, to enact stories by various characters. Build the dolls, dresses, give life, movement. In Rio Grande do Norte, the Puppet Theater, named "João Redondo," is measured by a historically male character of tradition, represented by some masters who have died or by their pupils, or even by the players who have no lineage of masters in their families but learned from several of them and, gradually, were included in this playful universe. Dadi passes this potiguar genealogy and going to suggesting a variety of transgressions, beyond, with its inventiveness, both in their presentations and in her life, which I did elect her and choose as a singular object in the course of my inquiries. In this study, I use the theoretical and methodological framework of social sciences, in particular the references coming from studies of culture, such as approaches of memory and tradition of authors such as Maurice Halbwachs and Paul Zumthor, among others. The field work was systematized, prioritizing the observation participant and permanent dialogue. I used different strategies for registration, as semi-open interviews, documentary video, audio narratives, photographic and videographic record, giving the work a current relevance to the dialogue with various elements, expanding the initial project, which turned into research for the dissertation

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research focuses on the fishery activity, aligned to knowledge of past generations, and the transformation to those who depend on this activity for their livelihood, at the seashore community of Pitangui in Extremoz municipality, which lies 40 km away from Natal, seat of the state of Rio Grande do Norte. The intense modernization which has taking place during the last few years may be considered the result of a number of economic, social and cultural factors, as the introduction of new fishery technology. On the other hand, the present study seeks to show how this changing process happened, and to what extent those affected understand and evaluate this transformation. The methodology to carry out the ethnographic work was mainly adopted by qualitative methods and techniques - by participant observation, oral history, photography and the audiovisual records besides reference to data extracted under quantitative methods, as an important instrument of analyses. This induces a conclusion that the transformation of the community is a consequence of the globalized market, though still tied up to specific local relations. The emerging results are: the use of new fishery technology, and new ways of orientation and navigation; the opening to new jobs and occupational activity, the re-order of space s appropriation; changing sociability, larger access to consumer goods, besides bringing on some new conflicts land appropriation and the fishery and the protection of the environment. All this comprehended as a result of the movement of the local relations participating in the global spaces

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the first half of the twentieth century different groups of intellectuals were engaged in the pursuit of an ideal of Brazility. Thereon, two currents are perceived. The first was marked by a nostalgic bias about the past, being formulated by intellectuals from the region that was turning as Northeast. This group of intellectuals emphasized values and traditions of the agrarian aristocracy of the region that was losing visibility in the political and economic Brazil scene. Already the other current has a more modern and industrial feature, was formed by intellectuals from the Southeast that in detriment of the first, was rising. This group, on the other hand, was intended to give a new face to Brazil and break with the "roots" of our delay that in their view were linked to our agrarian past. This resulted in different perceptions and interpretations of our historical past, and the construction of different profiles to the Brazilian. Accordingly, our work seeks to understand how was produced the writing that silenced the mixed ancestry of Auta de Souza (1876-1901) considering the position that she should occupy in the intellectuals projects who were in charge of forming a memory for our state. Auta as a relevant historical character in this project of potiguares intellectuals, she was raised to the condition of a model woman and elected in the pantheon of the most beloved poets of Rio Grande do Norte, however, to occupy such prestigious position she had her racial ancestry concealed in the writings that these same intellectuals had written about her, what is still spreaded in memory and rituals places of religious and civic features

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Barra do Camaratuba belongs to Mataraca city, nearby the boarder between Paraíba and Rio Grande do Norte states. It was the chosen community to develop this research, objectifying to study the set of practical of the cultural manifestations and the implications of the local tourist activity, considering the cultural dynamics. We tried to reconstruct stories from the narratives of the oldest inhabitants, natives, among others that they had lived, some how, individual and collective experiences related to the popular tricks and the traditional parties, considering what they speak and imagine about their experiences and its culture. The Lapinha, the Pastoril, the viola s songs, the Balls of Concertina, the João Redondo, the Ox of Kings, the wheel of Coconut were common practical perceivable through the communitarian bonds. Among these manifestations, the only one that resisted for a longer time was the wheel coconut. The São Pedro s fest is another popular manifestation that appears on the current scene like the padroeiro party, while others cultural practical compose the spectacle s scenery. These questions cover many of the narratives of the interviewed ones in the interlaced thing between memory, tourism and tradition. Therefore, we tried to build our research from the memory, participant observation, orality, techniques of the life history, personal depositions, among others basic methods for the reconstruction of a collective memory . Speaking about the past of Barra do Camaratuba is to live again the parties, the blood relations, the terço , the work in the roçados , in the flour house, the fishing, the leisure and the habits of the daily life. In this community, there is the presence of conflicts of social and cultural order, caused for the hegemonic classes that sponsor the parties. In the padroeiro party we perceive that the mercantile logic has started, very recently, to transform the religious factor into an excuse to put into motion the local economy. This way, a community originated from artisan fishers and agriculturists, having the fishing practical as a way of subsistence and the tricks as a reference, they had started to compose a new social picture with the arrival of the others and with the presumption and recent tourist development. We perceive social, environmental and cultural impact transformations, exemplified by a non planned activity or a predatory tourism. The changes will always be pointed and compared with other passing in a sphere of relations lived by the natives, local players and fishers

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dans ce travail, nous étudions la construction narrative du passé de la ville de Nova Cruz, dans l´agreste potiguar. Les récits soulignent l´existence d´un corpus narratif homogène qui fait référence à l´occupation du lieu et à l´évangelisation de ses habitants. Ainsi, les images des saints et des missionaires civilisateurs de l´espace qui domestiquent les manifestations d´un esprit autochtone sauvage, habitants du milieu naturel, sont recurrentes dans la description des personnages du passé. Observant la continuité sémantique des différentes versions de l´histoire de la ville, nous nous proposons d´analyser d´une manière conjointe les textes de l´historiographie locale et les témoignages oraux collectés. Comme il a été possible de le constater, les chemins de l´écrit et de l´oral se croisent en plusieurs occasions, obéissant à des logiques locales de représentations du passé. Ainsi, notre étude porte sur des champs communs à l´Anthropologie, à l´Histoire e à la Littérature. Les reconstructions narratives du passé local sont aussi activées par des faits plus récents, des "marques de la mémoire" comme le marché, le train, la croix et le réservoir, symboles d´une époque d´abondance qui suit l´action civilisatrice des personnages ancestraux