116 resultados para Mapeamento geotécnico


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Studies on the Brazilian continental shelf were developed between Touros and Macau-RN (NE Brazil) with the aim to mapping carbonate buildups, and especially, reef ecosystems. Remote sensing, submarine movies, bathymetric survey and diving were the methods used. This paper will focus on three main aspects of the Rio Grande do Norte reefs: 1) characterization of the coral fauna; 2) the classification and, 3) the distribution of the main northriograndense carbonate buildups. Reefs environments are found predominantly on the inner shelf adjacent to Touros, at depths shallower than 10 m. These reefs generally show NW-SE orientation parallel to the coastline and constitute groupings of knolls and patch reefs. A prominent carbonate buildup, where the corals are almost absents and algae incrustation is thin, occurs in average depths of 25 m, along the northern part of Rio Grande do Norte State and is classified as sandstone bank. Others sandstone banks, with smaller lengths and heights were mapped around 10 m depth. They should be related to an ancient coastline; however the corresponding litostratigraphic unit was not defined. This work is a contribution to the mapping of coral reef, in particular, and carbonate buildups, in general, on the Rio Grande do Norte coast

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The research area is located on the county of Tibau do Sul, in the east coast of Rio Grande do Norte State, about 80km south of the capital Natal. The tourism represents the main income activity and Pipa beach is the most visited beach in the city, annually receives a large influx of domestic and foreign tourists. Some recent studies have reported the occurrence of coastal erosion in this littoral, being the main objective of the research, analyze the existing coastal erosion, through two methodologies, the geoenvironmental mapping and beach morphodynamics. The geoenvironmental mapping was done from oblique aerial photographs and field visits, which sought to carry out first the geomorphological mapping, with the purpose of analyzing features that suggest susceptible areas to erosion, as areas without protection of natural dunes, marine terraces, or sandstones (beach-rocks and ferruginous sandstones), areas with the presence of gullies and stretches where the sea-cliffs were in direct contact with the action of the sea, representing the beginning of the beach profile. In the morphodynamic study sought to carry out the survey of the physical and morphological characteristics, the analysis of sediment grain of the beaches and finally the analysis of the morphodynamic parameters to generate a table of risk to erosion by sector of the beach. The morphodynamic parameters were defined by the methodology proposed by Short (2006), in which considers different patterns of dynamism on beaches with characteristics favorable and unfavorable to erosive profiles. The maps indicated different levels of risk to the segments of the beaches analyzed, suggesting risk to erosion low and low to moderate only in areas north and northwest of the beaches of Madeiro and Curral, and levels of moderate and high risk sectors in the south and southeast of these beaches . The beach of Pipa showed moderate levels of risk and moderate to high at the ends and high risk to erosion in the central portion. The study of the coastal environment, its morphological evolution, and areas with problems of erosion, are of fundamental importance to assist coastal management policies, giving grants for planning activities undertaken in these regions

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the current work are presented the results about the study of digital mapping of analogs referents the fluvial oil reservoirs in the Açu Formation. With the regional recognizing in the south corner of Potiguar Basin was selected a area of 150 Km square in the west of Assu city. In this area was chosen the outcrops for the digital mapping and from the data fields and remote sensors were done the depositional architectural for the fluvial deposits, which it was named coarse meandering fluvial systems. In the deposits were individualized 3 (three) fluvial cycles, which they was separated by bounding surface of fifth order. Such cycles are preferentially sandy, with fining-upward sequence finished in flood plain deposits. Inner of the sandy levels of the filling channels were characterized least cycles, normaly incomplete, constituted by braided sandy bodies and bounding surfaces of fourth order. In the mapped area was chosen a outcrop with great exposition, where it was possible to see tipical deposits of filling channel and was in this outcrop that was done the digital mapping. In this outcrop was used diverse technics and tools, which they integrated sedimentological, altimetric (GPS, Total Station), LIDAR (Light Detection and Ranging), digital photomosaic of high resolution and of the inner geometries (Ground Penetration Radar) data sets. For the integrating, interpretation and visualization of data was used software GoCAD®. The final product of the outcrop digital mapping was the photorealistic model of part of the cliff (or slope) because the observed reflectors in the radargrams were absents. A part of bar oblique accretion was modeled according to GPR gride of 200x200 meters in the alluvial Assu river probable recent analog. With the data of inner geometries was developed the three-dimentional sedimentary architectural, where it was possible characterize sand sheet deposits and many hierarchy of braided channels. At last, simulations of sedimentary geometries and architectures of the Potiguar Basin Fluvial Reservoirs were done with PetBool software, in order to understand the capacity of this program in simulations with a lot of numbers of conditioning wells. In total, 45 simulations was acquired, where the time and the channel numbers increase in relation of the conditioning wells quantity. The deformation of the meanders was detected from the change of simulated dominion dimensions. The presence of this problem was because the relationship between the simulated dominion and the width of the meander

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The goal of this work comprises the detailed mapping of the coastal zone of the south coast of the State of Rio Grande do Norte. The emphasis of the study is the units of beachrocks and the features of the physical environment associated. The mapping of the beachrocks and of the adjacent coastal features is justified, among other aspects, by the fact that the beachrocks constitute an important protection agent against the sea erosion. By one side, they dissipate the energy of the sea waves and make possible the imprisonment of sediments in the foreshore. The beachrocks in the studied area are constituted of discontinuous strips, parallel to the coast line presenting emerged in some places, even in the highest tides, entirely submerged or partially buried by coastal sediments. These sandstones compose the landscape of big part of the coast and they are responsible for the partial dissipation of the energy of the waves on the studied coast. The methodology used in this work consisted of different techniques were used, as the use of aerial pictures of small format (FAPEFs), acquisition of data of system of global positioning (GPS) and later elaboration of thematic maps and of digital models of soil (MDTs). The results obtained in the mapping of the use and occupation of the soil, demonstrate the existence of strong human pressure in the coastal area (built lots and no built), occupying about 54,74% of built areas. This problem has been taking to degradation risks due to the inconsequent expansion of divisions into lots and tourist enterprises. The MDT came as an excellent resource, as visual as functional, being possible to visualize several angles and to act in three dimensions the relief of the area in study, as well as to identify the present features in the coastal area. By the importance of the bodies of beachrocks as a protection agent against the coastal erosion, faces were delimited in the sandstones based in geometric criteria, classifying them in, central face, outside face, inside face, break and undermiming. These last two associates to the erosion and washout in the base of these bodies. Field data indicate clearly that the most important process in the fracturing of the bodies is associated with mechanisms related to the gravity, being the joints formed by processes of gravitational sliding. Finally, the mapping of the coastal zone starting from aerial pictures of small format it made possible the identification of the elements that compose the beach strip, for accomplishing with larger detailed level and by presenting a better monitoring of the dynamics of the coastal zone

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The drilling of wells for petroleum extraction generates rocks and soils fragments, among other residues. These fragments are denominated petroleum drilling gravel or simply petroleum drilling residue. On the sites of onshore exploration are formed big deposits of drilling gravel, an expensive final destination material. This work aims at evaluating the addition of drilling residue to a lateritic soil, as composite material, for construction of compacted fills for earth work projects. Soil and residue were evaluated by X-ray diffraction (XRD) and X-ray fluorescence (XRF) and by laboratory tests traditionally used in soil mechanics, as particle-size analysis of soils, determination of liquid and plasticity indexes and compaction test. After soil and residue characterization, soil-residue mixtures were studied, using dosages of 2,5%, 5%, 10%, and 15% of residue in relation to the dry soil mass. These mixtures were submitted to compaction test, CBR, direct shear test and consolidation test. The test results were compared to the current legislation of DNIT for compacted fill construction. The results showed that the mixtures presented the minimal necessary parameters, allowing, from the point of view of geotechnical analysis, the use of these mixtures for construction of compacted fills

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Innovation has become an increasingly central issue of great reputation, not only in literature but also in management practices, becoming a strategic issue for managers of organizations. Allied to this, there is a high degree of competitiveness on the market, which contributes to the complexity of decision making, since managers need to maintain a continuous cycle of renewal processes and products. Thus, market pressures for new alternatives encourage innovation within organizations as a foundation for culture change in pursuit of survival and increased competitiveness, making it essential to know the factors that promote the advancement of organizational environments targeted innovation. Confirming this view, Bouchikhi and Kimberly (2001) symbolically expressed the idea with two statements: (1) companies need to innovate to survive, otherwise they die; and (2) the wide recognition of this need, as well as the difficulty to encourage and support innovation and entrepreneurship in business, has generated a mini-industry research and consulting in management focused on these topics. This study is characterized as descriptive with qualitative and quantitative methods. As for the planning of the research, it was decided to bibliographical research and the case study. The research, developed here, is meant to examine the organizational environment of a laboratory focused on technological innovation in health, which is a reference in research and technology of Rio Grande do Norte, and ensure that it presents opportunities to develop innovations. Therefore, the technologies developed by the Laboratório de Inovação Tecnológica em Saúde - LAIS/UFRN were mapped and then a questionnaire with the stakeholders of LAIS/UFRN was applied. This questionnaire is closed and Likert scale. As a result, it follows that the dimensions 1, 6, 7 and 8 are the most influential to form an innovative environment at LAIS.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Located on the western edge of the Brazilian northeast, the Parnaíba Basin is an intra cratonic basin with oil production. This study aims at understanding its genesis and evolution, using aeromagnetic and gravity data. We used the spectral analysis of aeromagnetic data to map the depth to the bottom of the magnetic sources in order to assimilate this depth with the depth of the Curie isotherm, and infer the geothermal gradient. Using the spectral analysis technique, we succeeded in mapping the surface of the depth to the bottom of magnetic sources (SBFM), which marks the depth that occur magnetization. In the Parnaíba Basin the SBFM presented depths around -20,5 and -28,5 , which was consistent with an inversion of the same dataset using the technique of Magnetization Vector Inversion (MVI). Furthermore, SBFM topography correlates well with Moho depth, which was estimated from satellite gravimetric data from the GOCE mission (Gravity Field and Steady-State Ocean Circulation Explorer). Assuming that SBFM coincides with the Curie isotherm of magnetite (ICM), defined as the surface at which magnetite ( ) looses its ferromagnetic properties, it was possible to estimate the geothermal gradient. The geothermal gradient in the basin showed values between 19.2 and 26.5 , allowing to estimate the heat flow for the Parnaíba basin after assuming a conductivity of 2.69 . The resulting heat flow values ranged between 51.6 and 71.3 , which is consistent with values found in other works throughout the South American continent. Lithospheric thickness using an empirical relationship, finding values between -65.8 and -89.2 . We propose that thermal structure of Parnaíba basin is influenced by a deep thermal anomaly. This anomaly has heated the lithosphere beneath the basin and has resulted in relatively thin values for the lithospheric thickness and relatively high surface heat flow values. The origin of the anomaly is not clear, but the correlation between Curie depth and Moho topography, suggests that tectonic extension processes could have played a role.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The crustal architecture of the Borborema Province was investigated through migration and stacking of receiver functions (phase-weighted-stack). The stacks were developed from teleseismic

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Rachycentron canadum species, commonly known as beijupirá or cobia is the only representative of Rachycentridae family which has been increasingly used in marine fish farming, in intensive cultivation. As advantageous features it has easy adaptation, prolific behavior, early growth in captivity and high commercial value. Additionally, specie of Lutjanidae family (Lutjanus synagris, Lutjanus jocu, Lutjanus analis, Lutjanus alexandrei and Ocyurus chrysurus) represents an important fisheries resource in all areas of its occurrence. In Brazil, the commercial exploitation of Lutjanidae which begun in the 60's and 80's, already has showed a decline in catch volumes. This fact suggests that the snappers must have a conservative management. Despite the economic potential, little is known about the genetic and cytogenetic characteristics of these species, especially with respect to repetitive DNA analysis, which represents the major part of the eukaryotes genome, playing important evolutionary roles in the fish genome. Cytogenetic data is increasingly being used in population studies and biotechnological purposes in fishes. The cytogenetical analyzes were performed using classical methods such as Giemsa staining, C-banding and Ag-NORs, fluorochromes base-specific staining (DAPI and MM) and physical mapping of repetitive sequences among which, telomeric sequences, transposons (Tol2), retrotransposons (Rex1 and Rex3), repetitive DNA (microsatellites and Cot-1) and transcriptionally active regions of the 18S and 5S ribosomal genes and histone (H3 and H2BA) by in situ hybridization with fluorescent probes (FISH). The chromosomal patterns obtained contributed to the organization of repetitive sequences in the genome of the species, as well as karyotypical differentiation. Unusual patterns of histone sequences expansion depict the first occurrence in marine fishes. The obtained data provided subsides to the genetic knowledge of the important fisheries resource represented by the species here analyzed, seeking the marine pisciculture improvement.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The accessory optical system, the pretectal complex, and superior colliculus are important control centers in a variety of eye movement, being extremely necessary for image formation, consequently to visual perception. The accessory optical system is constituted by the nuclei: dorsal terminal nucleus, lateral terminal nucleus, medial terminal nucleus and interstitial nucleus of the posterior superior fasciculus. From a functional point of view they contribute to the image stabilization, participating in the visuomotor activity where all system cells respond to slow eye movements and visual stimuli, which is important for the proper functioning of other visual systems. The pretectal complex comprises a group of nuclei situated in mesodiencephalic transition, they are: anterior pretectal nucleus, posterior pretectal nucleus, medial pretectal nucleus, olivary pretectal nucleus and the nucleus of the optic tract, all retinal projection recipients and functionally are related to the route of the pupillary light reflex and the optokinetic nystagmus. The superior colliculus is an important subcortical visual station formed by layers and has an important functional role in the control of eye movements and head in response to multisensory stimuli. Our aim was to make a mapping of retinal projections that focus on accessory optical system, the nuclei of pretectal complex and the superior colliculus, searching mainly for pretectal complex, better delineation of these structures through the anterograde tracing with the B subunit of cholera toxin (CTb) followed by immunohistochemistry and characterized (measured diameter) synaptic buttons present on the fibers / terminals of the nucleus complex pré-tectal. In our results accessory optical system, including a region which appears to be medial terminal nucleus and superior colliculus, were strongly marked by fibers / terminals immunoreactive CTb as well as pretectal complex in the nucleus: optic tract, olivary pretectal nucleus, anterior pretectal nucleus and posterior pretectal nucleus. According to the characterization of the buttons it was possible to make a better definition of these nucleus.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The process mapping is an important tool in the management of organizations, allowing better levels of productivity, quality and reciprocity concerning the implementation and decision-making. It benefits in a clear way the process organization and assures the manager a macro vision of the system. In this sense, the objective of this study is to describe the mapping process as it occurs in the Januario Cicco Maternity School–MEJC. The bibliographic and descriptive research included interviews, observations and researches in many databases. The study analyzed the limiting points of the detected flow trying to find a better comprehension of the flow of patients in the maternity in order to offer the gestors the information necessary to improve the quality of the assistance as well as a general view of the flow of patients and any change detected there. As a result, we believe that the process mapping may become a relevant factor to the organizational management of MEJC, in view that it is an element that can contribute to ease up the management of information studied, considering that the perfect change of information inside a complex system will produce improvements in all spheres of this institution.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The new management models have led to the reorganization of institutions today. Much is made in improving the delivery of public services entities, and they have sought to adopt these new initiatives in order to improve the quality of the product or service offered to users. The modernization of the management model at the Federal University of Rio Grande do Norte (UFRN) strengthened by the accession of the institution to GesPública Program, which focuses on the management modernization leading institutions to seek ways to fit to meet the demands proposed the Program. Therefore, the Department of Personnel Administration (DAP) has structured its processes and procedures using the mapping tool processes. This research starts from the question: what were the results obtained with the implementation of the management and process mapping of PAD? It is proposed as a general objective to analyze the management and the mapping of that Board processes, identifying the possible benefits in improving the quality of the services provided to users. The specific objectives to achieve results, are pointed out: describe how you carried out the implementation of the management and process mapping in DAP and how it is working at the moment; examine the line in the relationship between the actions developed by the DAP and modern theories of this theme; identify the evolution of the sector with the measures adopted and the results obtained with the implementation of the mapping tool. In the theoretical framework, it was approached a brief history of the evolution of public administration in Brazil, GesPública program and its importance for process management in public institutions as well as the Management and Process Mapping. The context of the study was the DAP, and participants were managers of the institution in the survey. Data collection was done through the study of the institution's documents, bibliography analysis available on the topic, questionnaires and semi-structured interviews with professionals of the institution involved with the object of study, since its inception until July 2015, when it was finished the search. As a result, were listed: the motivation, importance, benefits and innovations that management and the mapping of processes brought to the institution, point out what has been improved in the service users and the tools used. We also analyze the main problems identified during the implementation of the mapping. As a suggestion, it was analyzed how these procedures can, if possible, be extended to other sectors of UFRN.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The new management models have led to the reorganization of institutions today. Much is made in improving the delivery of public services entities, and they have sought to adopt these new initiatives in order to improve the quality of the product or service offered to users. The modernization of the management model at the Federal University of Rio Grande do Norte (UFRN) strengthened by the accession of the institution to GesPública Program, which focuses on the management modernization leading institutions to seek ways to fit to meet the demands proposed the Program. Therefore, the Department of Personnel Administration (DAP) has structured its processes and procedures using the mapping tool processes. This research starts from the question: what were the results obtained with the implementation of the management and process mapping of PAD? It is proposed as a general objective to analyze the management and the mapping of that Board processes, identifying the possible benefits in improving the quality of the services provided to users. The specific objectives to achieve results, are pointed out: describe how you carried out the implementation of the management and process mapping in DAP and how it is working at the moment; examine the line in the relationship between the actions developed by the DAP and modern theories of this theme; identify the evolution of the sector with the measures adopted and the results obtained with the implementation of the mapping tool. In the theoretical framework, it was approached a brief history of the evolution of public administration in Brazil, GesPública program and its importance for process management in public institutions as well as the Management and Process Mapping. The context of the study was the DAP, and participants were managers of the institution in the survey. Data collection was done through the study of the institution's documents, bibliography analysis available on the topic, questionnaires and semi-structured interviews with professionals of the institution involved with the object of study, since its inception until July 2015, when it was finished the search. As a result, were listed: the motivation, importance, benefits and innovations that management and the mapping of processes brought to the institution, point out what has been improved in the service users and the tools used. We also analyze the main problems identified during the implementation of the mapping. As a suggestion, it was analyzed how these procedures can, if possible, be extended to other sectors of UFRN.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

SOUZA, Anderson A.S. ; MEDEIROS, Adelardo A. D. ; GONÇALVES, Luiz Marcos G. . Algorítmo de mapeamento usando modelagem probabilística. In: SIMPOSIO BRASILEIRO DE AUTOMAÇÃO INTELIGENTE, 2007, Natal. Anais... Natal, 2007.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

VANTI, Nadia. Mapeamento das Instituições Federais de Ensino Superior da Região Nordeste do Brasil na Web. Informação & informação, Londrina, v. 15, p. 55-67, 2010