Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

Estudo da secagem do pedúnculo do caju em sistemas convencional e solar: modelagem e simulação do processo

This work aims to study the drying of cashew-nut pulp with different lay-out of dryers using conventional and solar energy. It concerns with the use of exceeding of the regional raw material and the suitable knowledge for the applicability of the drying systems as pathway for food conservation. Besides, it used renewable sources as solar energy to dry these agroindustrial products. Runs were carried out using a conventional tray-dryer with temperature, air velocity control and cashew slice thickness of 55°C, 65°C, 75°C; 3.0; 4.5, 6.0 m s-1; 1.0; 1.5 and 2.0 cm, respectively, in order to compare the studied systems. To evaluate the conventional tray-dryer, it was used a diffusional model of 2nd Fick´s law, where the drying curves were quite well fitted to an infinite flat plate design. For the drying runs where the room temperature had no control, it was developed a phenomenological-mathematical model for the solar dryer with indirect radiation under natural and forced convection based on material and energy balances of the system. Besides, it was carried out assays in the in natura as well as dehydrated, statistic analysis of the experimental drying data, sensorial analysis of the final dry product and a simplified economical analysis of the systems studied

A formação pós-graduada em ensino de ciências naturais e matemática de docentes do IFRN: implicações na atuação docente

This research part of the educational context of the Federal Rio Grande do Norte, through the resumption of legal frameworks that characterize it as an institution belonging to the Federal Network of Professional Education and Technology Brazilian, with a focus on continued education policies for the servers who work there specifically teachers, especially those who have their work in the Teaching of Natural Science and Mathematics. To do this the cut in an agreement between the IFRN and UFRN PPGECNM through the professional master's degree Teaching of Natural Sciences and Mathematics. This agreement as we have research collaborators 08 master teachers who graduated in the period 2004 to 2010, so we undertook a qualitative and quantitative research aimed to conduct the study in general terms of description and analysis of the impacts caused by the formation of masters IFRN in PPGECNM UFRN, taking into account the production of the same academic (dissertation), his performance in the context of the institution and the historical, social, economic and political aspects involved, and also meet the guidelines of the project at the Observatory in 2008 - MEC / CAPES / BSD-P. We used the theoretical options methodological elements of Comprehensive Interview and multireferentiality, our data collection instrument was the main interview, we also performed the analysis of dissertations by lecturers and teachers featured, from the specific descriptors used in catalogs USP / IFUSP (1992, 1996) and UNICAMP / FE / CEDOC (1998) and by other researchers. In analyzing and understanding the speech of the interviewees were able to identify the implications of teacher education in the school context, the motivation to seek the Master; how was the construction of the object of study of the educational product and its use in teaching practice and intervention, the question of the role of master teachers in the school environment to the post master taking into account changes in professional performance and influence in the working groups, how does the use of research and investigation in the classroom after training and between training and educational quality in the context of IFRN. In reading and analysis of the dissertations were able to identify the main focus and under-explored thematic focus as well as the theoretical methodological references. At the end of the research developed a product that could be used for technical analysis studies and assessment in quantitative terms the results achieved by the master teachers IFRN through his training in PPGECNM UFRN

Tontura em idosos institucionalizados da cidade do NATAL/RN: Um estudo caso-controle em vestibulopatas e não-vestibulopatas

the institutionalized elderly presents for being more fragile a lot of body balance s changes, which can induce falls and health frailty. One of the consequences of it is the appearance of dizziness, vestibular or not. This study aims to identify the risk factors related to dizziness in institutionalized elderly, with and without vestibular disorders, in the city of Natal-RN. Method: a case-control study realized in 12 regulated by Health Surveillance Long Term Care Institutions for the elderly in Natal-RN. Elected seniors with good cognitive level and able to walk, totaling 115 individuals, and of these, 102 were selected according to the presence of dizziness in the last year (n = 51) and their controls (n = 51), paired by sex and age. The 51 elderly patients with dizziness were divided into 3 groups case: case one, for elderly with dizziness and without vestibulopathy (n=38); case two, for elderly with dizziness and vestibulopathy (n=13) and case three, for all the seniors with dizziness, or added to the case 1 case 2 (n=51). The 51 seniors who served as controls were also divided into three groups, according to the number of individuals of each case: control 1, n = 38, control 2, n = 13 control and 3 (sum of 1 control with control 2), n = 51. As possible risk factors were analyzed variables related to characteristics of the institution, to the habits of life of older people and those concerned with the health of the elderly. For statistical analysis, we used the chi-square or Fisher exact test for a significance level of 5% and calculating the association magnitude between variables by measuring the Odds Ratio. Results: as risk factors for dizziness without vestibular disorders were found the presence of hypertension and cardiovascular disease, as well as the presence of three or more disorders for elderly and use of gastric protector drugs. For the elderly group from case two were found no associated risk factor. For elderly patients with dizziness in the case group three, we observed the same risk factors found for the elderly in the case group one, plus the presence of osteoarthritis pathology, which was also significant for this group. Conclusion: dizziness in institutionalized elderly is associated with systemic common diseases in this age group and the vestibulopathy presents itself as pathology on an isolated way, not being possible, with our data, associate it with non-risk factors

Práticas agroecológicas para o cultivo do gergelim (Sesamum indicum L.)

The exceeded use of the natural resources required by the modern agriculture has been caused soil impoverishment, soil salinization and soil compaction. The unreasonable use of chemical fertilizers and pesticides causes chemical imbalances in the plant tissues, nutritional losses, taste chances and human health problems. The monocrops are more vulnerable to the pest and disease attacks. The aim of this work were to indicate the better relative planting time of the cowpea bean for the sesame/cowpea bean intercropping based on the evaluation of agronomic, economic, ecological and physiological parameters and to evaluate the viability of the cow urine and cassava wastewater use as alternative fertilizers on the sesame cultivation. In a field essay, when the sesame/cowpea bean was evaluate, the mainly treatments were the single planting of the two cultures and the multiple cropping, with the cowpea bean being planted on the same time, 7, 14 and 21 days after the sesame. The mainly treatments of the second essay were the combined doses of the cow urine (0 and 50 ml) and cassava wastewater (0, 500 and 1000 mL). In the intercrop evaluation significant differences were found between the treatments for the most of the parameters. It was verified that as the sowing of the cowpea bean was retarded in relation to the sesame sowing, the sesame performance increased when the cowpea bean performance decreased. The treatment 7 days balanced the competition relations that occurred between the two crops in the intercrop. The sesame presented little pronounced responses to the different doses of cassava wastewater. The cow urine affected the sesame growth and the growth rates increased with the increasing of the application of the product. The responses of the sesame growth to the cow urine application must be related both the nutritional richness of the product and the presence of growth stimulating substances. The obtained results indicated that in the sesame/cowpea bean intercropping, when the sesame is planted 7 days after the sesame, there is a higher possibility of the net gains to the farmer. Cow urine and cassava wastewater may be used as additional organic fertilizers

Interpretação de dados de GPR com base na hierarquização de superfícies limitantes e na adaptação de critérios sismoestratigráficos

Due to its high resolution, Ground Penetrating Radar (GPR) has been used to image subsurface sedimentary deposits. Because GPR and Seismic methods share some principles of image construction, the classic seismostratigraphic interpretation method has been also applied as an attempt to interpret GPR data. Nonetheless some advances in few particular contexts, the adaptations from seismic to GPR of seismostratigraphic tools and concepts unsuitable because the meaning given to the termination criteria in seismic stratigraphy do not represent the adequate geologic record in the GPR scale. Essentially, the open question relies in proposing a interpretation method for GPR data which allow not only relating product and sedimentary process in the GPR scale but also identifying or proposing depositional environments and correlating these results with the well known Sequence Stratigraphy cornerstones. The goal of this dissertation is to propose an interpretation methodology of GPR data able to perform this task at least for siliciclastic deposits. In order to do so, the proposed GPR interpretation method is based both on seismostratigraphic concepts and on the bounding surface hierarchy tool from Miall (1988). As consequence of this joint use, the results of GPR interpretation can be associated to the sedimentary facies in a genetic context, so that it is possible to: (i) individualize radar facies and correlate them to the sedimentary facies by using depositional models; (ii) characterize a given depositional system, and (iii) determine its stratigraphic framework highligthing how it evolved through geologic time. To illustrate its use the proposed methodology was applied in a GPR data set from Galos area which is part of the Galinhos spit, located in Rio Grande do Norte state, Northeastern Brazil. This spit presents high lateral sedimentary facies variation, containing in its sedimentary record from 4th to 6th cicles caused by high frequency sea level oscillation. The interpretation process was done throughout the following phases: (i) identification of a vertical facies succession, (ii) characterization of radar facies and its associated sedimentary products, (iii) recognition of the associated sedimentary process in a genetic context, and finally (iv) proposal of an evolutionay model for the Galinhos spit. This model proposes that the Galinhos spit is a barrier island constituted, from base to top, of the following sedimentary facies: tidal channel facies, tidal flat facies, shore facies, and aeolic facies (dunes). The tidal channel facies, in the base, is constituted of lateral accretion bars and filling deposits of the channels. The base facies is laterally truncated by the tidal flat facies. In the foreshore zone, the tidal flat facies is covered by the shore facies which is the register of a sea transgression. Finally, on the top of the stratigraphic column, aeolic dunes are deposited due to areal exposition caused by a sea regression

Reprodução do capital e metamorfoses espaciais : um estudo da verticalização de Ponta Negra, Natal/RN

The broach presented in this dissertation, linked to post graduate Geography´s of the Universidade Federal do Rio Grande do Norte - UFRN, more exactly about the research group entitled interdisciplinary studies unit on space and housing built . The research developed through this study has this central theme on vertical grounding of the construction in the neighborhood of ponta negra in Natal, Rio Grande do Norte. Realizing this momentum as a way of accumulation of capital in city. Rio Grande do Norte´s city. During the 2000 s , the neighborhood of Ponta Negra went through an intense process of vertical integration of its ground, Provided by many factor of conditions created from new economic, political and social functions which start to be outlined mainly from the tourism development in this neighborhood since the 80´s decade. The Tourism development and the landing planning of the ponta negra´s neighborhood promoted for the government by using order to police the city´s urbanization, beyond the sense of the civilian building actors. They enabled this neighborhood to become propitious to the real estate investments. Many ventures were built before the year of 2010 while another are on building, which, over the years, changed the sociospatyal dinamics of the neighborhood. Considering the urban space is socially built, product and condition for the reproductive process of the capitalist society, the goal of this research is to investigate the verticalization of the ground, for capital reproduction purposes. This research aims to analyze the vertical this quarter through the theory of social production of space by Henri Lefebvre. The Methodology adopted pervades for secondary and primary research, compound for bibliographic research, documentary, journal, magazines, camp research and interview, to reach the best way to analyse the dynamics of the refered neighborhood

Metodologia para implantação de um sistema de disposição de rejeitos em minério de ferro na região do semiárido: estudo de caso

Tailings dams are structures that aims to retain the solid waste and water from mining processes. Its analysis and planning begins with searching of location for deployment, step on which to bind all kinds of variables that directly or indirectly influence the work, such as geological, hydrological, tectonic, topographic, geotechnical, environmental, social characteristics, evaluation security risks, among others. Thus, this paper aims to present a study on the most appropriate and secure type of busbar to design a layout structure of iron ore tailings, taking into account all the above mentioned variables. The case study involves the assessment of sites for location of dams of tailings disposal beneficiation of iron mine to be built in Bonito, in the municipality of Jucurutu in Seridó Potiguar. For site selection among alternatives, various aspects of the current state of the art were considered, one that causes the least environmental impact, low cost investment, adding value to the product and especially the safety of the implanted structure mitigates the concern about induced earthquakes as a result of liquefaction wastes somatized by dams in the region, as the tilling of Mina Bonito is located practically in the hydraulic basin dam Armando Ribeiro in environmental protection (APA). The methodology compares induced by dams in the semiarid region with the characteristics of the waste disposal and sterile seismicity, taking into account the enhancement of liquefaction by the action of seismicity in the Mina Bonito region. With the fulcrum in the methodology, we indicated the best busbar type for disposal of tailings from iron ore or combination of them, to be designed and built in semiarid particularly for Mina Bonito. Also presents a number of possible uses for the tailings and in engineering activities, which may cause processing to the common good.

Uso da cinza do bagaço da cana-de-açúcar como matéria-prima na substituição dos fundentes para aplicações em porcelanato

The present study aims to evaluate the potential use of bagasse ash from sugar cane (CBC) as a flux, replacing phyllite and/or feldspar in standard industrial mass production of enameled porcelain, verifying the possibility of the CBC contribute to the overall reduction of the coefficient of thermal expansion of the ceramic mass. To this end, as a result of the research, we characterized the raw material components of the standard mass (clay, phyllite, kaolin, feldspar, quartz and talc) and the residue of BCC, by testing by XRF, XRD, AG, DTA and ATG. Specimens (CDP) were manufactured in the dimensions of 100 mm x 50 mm x 8 mm in uniaxial matrix under compaction pressure of 33 MPa, assembled in batches of 3 units subsequently sintered at temperatures of 1150°C to 1210°C by varying the Rating Scale at 10°C, heating and cooling ramp of 50°C/min and 25°C/min, with levels of 1 min, 3 min, 5 min, 8 min, 10 min, 15 min, 30 min and 60 min. analyzing the results of the physical properties of water absorption (WA), linear firing shrinkage (LFS), dilatometric analysis (DTA), flexural strain (SFT) and SEM of the sintered bodies in order to verify the adequacy of CDP to ISO 13006, ISO 10545, NBR 13816 standards; NBR 13817 and NBR 13818. The study showed that the formulations that best suit the requirements of the standards are:. G4 - which was applied in 10% of replacing the CBC phyllite, sintering temperature 1210 ° C for 10 min and porch, and F3 - with application of 7.5% of CBC to replace the feldspar in the sintering temperatures of 1190°C, 1200°C and 1210°C for 10 min and porch. These formulations showed better performance regarding the formation of primary and secondary mullite, with considerable reduction of cracks and pores, meeting the prerequisites of standards for glazed porcelain. The results shows that the use of the CBC as a flux in the preparation of porcelain mass meets standard parameters for the manufacture of the product, and thereby can reduce environmental impact and the cost of production. Therefore, it is recommended to use this residue in the ceramics industry, due to its industrial, commercial and collaborative viability for sustainability.

Uso de resíduos de queima de casca de café e argila da região sul da Bahia na obtenção de isolador elétrico cerâmico

The electrical ceramic insulators industry, uses noble raw materials such as siliceous and aluminous clays of white burning, in order to provide plasticity of the mass and contribute to electrical and mechanical properties required of the product, and feldspar with the flux function In literature references the composition of the masses indicates that the clay participates in percentage between 20 and 32, and feldspar 8 to 35, these materials have significant cost. In this research was performed the total replacement of commercial clay, for white burning clay from Santa Luzia region in southern Bahia and partial replacement of feldspar by ash residue of husk conilon coffee burning, from extreme south of Bahia. The objective of replacement these raw materials is to aver its technical feasibility and call attention for the embryo pole of ceramic industry for the existing in the south and extreme south of Bahia, which has significant reserves of noble raw materials such as clay white burning, kaolin, quartz and feldspar, and generates significant volume of gray husk conilon coffee as alternate flux. Clay Santa Luzia is prima noble material whose current commercial application is the production of white roofing. The residue of coffee husk ash is discarded near of production sites and is harmful to the environment. Phase diagrams and statistic design of experiments, were used for optimization and cost savings in research. The results confirmed the expectations of obtaining electrical ceramic insulators, with white burning clay of Santa Luzia and partial replacement up to 35.4% of feldspar, by treaty residue of conilon ash coffee husk burning. The statistic design that showed best results was for formulation with percentages of: clay 26.4 to 30.4%; kaolin 14.85 to 17.1%; feldspar 12.92 to 16.96%; R2 residue 7.08 to 9.2% and Quartz 32.5 to 38.75%, relative to the total mass of the mixture. The best results indicated; 0.2 to 1.4% apparent porosity , water absorption 0.1 to 0.7%, flexural strength 35 to 45MPa , dielectric strength 35-41 kV/cm , the transverse resistivity 8x109 2.5x1010 Ω.cm and for the dielectric constant ε/ε0 7 to 10.4, specification parameters for manufacturing ceramic electrical insulators of low and medium voltage.

Dinâmica de expansão urbana de Ceará-Mirim-RN: aspectos locais e metropolitanos?

This study aims to understand the growth dynamics of Ceará-Mirim city considering the aspects that define its current urban sprawl. We chose to use as methodological approach the concept of space as a product and producer of social relations and the same constitutes by objects and actions that relate in a dialectical process over time. As a research tool, it took place bibliographical study that features the historical aspects of use and occupation, in order to evidence the regional ground agents that explain its current urban setting. Then, it was collected a secondary data of economic analysis activities from municipality and their impact on local social structure. Between these aspects, the sugar economy, even in decline, had appeared as defining the boundaries of urban growth. At the regional scale, other factors were discussed in a way of urban influence processes forming the Greater Natal (RMNatal), and Ceará-Mirim appears integrating into this scale in a very low level according to Metropolis Observatory (2012). However, we have pointed out that in recent years, especially in growth vector of BR 406, settled metropolitan scope equipment. These objects have been associating in a real estate sector's reasoning while the possible "metropolization" have been promoting as investments in the city's expansion area.

O registro de procedimentos metodológicos em projetos de intervenção arquitetônica no patrimônio edificado: o caso de Natal-RN

In the midst of growing preservationist awareness, regarding methods of architectural intervention of buildings with a recognized heritage value, there are numerous approaches on how the original heritage value can be protected. However, can these intervention projects be differentiated? Is it possible to identify how they differ (if in fact they do) from an architectural project not related to preservation? Although there are numerous theoretical studies regarding methods utilized in architectonical projects, there appear to be a lack of studies focused on an architectural intervention exclusively focused on areas or edifications that have a recognized heritage value, thereby requiring a reflection on which methodological procedures in an architectonical project serve the purpose of the preservation of the historical aspects. This discussion is of even greater importance because, at the national level, some recent discussions on this type of architectural design seem arbitrary and lack methodological rigor. Therefore, this research attempts to focus equally on the theoretical-methodological practices of preservation as well as the architectural project methods. In an attempt to address these aspects, the focus of this research centers on the case studies of the intervention projects of the maritime passenger terminal of Natal (Terminal Marítimo de Passageriros de Natal), the old government hall (Palacio do Governo - EDTAM) and the old central hotel (Hotel Central) which are situated in the area known as the historic downtown of the city of Natal, within the federal heritage protection polygon. The analyses of these is intended to identify what methodological procedures were recorded in the final product (in the graphical representation of the architectural design and other documents) delivered to IPHAN / RN, the body responsible for review and approval of these architectural projects, noting whether such procedures appear, in some way, in the final product, and if an understanding of the complexity of preservation is evident. The analyses of these projects corroborate the hypothesis that there are unique characteristics, which must be addressed in the intervention project for preservation when compared to new project design. The main characteristic to be addressed is related to the very nature of the project. It is inherent in the dialectical relationship between the need to preserve (the identified heritage values) and the need to modernize (making adaptations to contemporary life). This relationship, denominated in this dissertation as "radical restraint", must, or at least should, guide the actions in the project as well as the technical analyses of the preservationist organization. However, this radical restriction appears more evident in the guidelines put forth by legislators than in the decisions of designers. These legislators require the presentation of documents, aimed at identifying and contextualizing intervention (Ordinance No. 420 of December 22, 2010), that grant (or should grant) assistance in the decision making process. It was evident in the analyses of these documents that there existed a disconnect between the documents produced and the decisions made in the project. This fact can be seen in the total absence of dialogue about theoretical-methodological preservationist principles, which, in our view, is an essential element of the methodological procedures of the intervention project needed to guide the legislative and project design discussions.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.