Estudo clínico-laboratorial e histopatológico de cães naturalmente infectados por Leishmania chagasi com diferentes graus de manifestação física

Canine Visceral Leishmania (CVL) is an important zoonotic disease that has a world wide distribution and has a large impact on public health on the American Continent, especially in Brazil, where the nature of endemic diseases in humans affects a large part of the nation. The influence of the prevalence of CVL in the increased rate of human cases in endemic areas and in the unleashing of epidemic outbreaks shows the need for a more profound understanding, that would generate significant advances in the current measures used to control the reservoirs of sickness that are practiced by the Programa Nacional de Vigilância e Controle da Leishmaniose Visceral. The present work describes and compares the clinical-laboratorial and histopathological findings of twenty-three dogs that were naturally infected by Leishmania chagasi, from endemic areas in metropolitan Natal, Rio Grande do Norte, Brazil. These animals, that were selected and given physical and serological exams (IFI and ELISA rK-39), were classified according to the degree of clinical severity and had blood samples drawn (whole blood and serum) for a complete hemogram and a coagulogram to be done as well as biochemical tests for kidney and liver function. The confirmation of infection by L. chagasi was done after the euthanasia of the animals, through the direct demonstration of the parasite in the impression of the spleen and liver crowned with GIEMSA and through a cultivation by means of NNN/Schneider. According to the clinical evaluation, the animals were classified as asymptomatic (7), oligosymptomatic (7) and polysymptomatic (9). Among the animals that were chosen to be autopsied, there were 2 asymptomatic, 3 oligosymptomatic and 3 polysymptomatic, for the purpose of studying their histopathology, having collected fragments of the spleen, liver, kidneys and skin and were fixed in 10% tamponed formol. The comparison between the average parameters of the clinical-laboratory tested animals in the groups was done through the Student t test (a<0.05). The main clinical signals observed were lymphadenomegaly, alopecy, dermatitis, exfoliation, cutaneous ulcers, onicogriphosis and emaciation. The main clinical-laboratorial alterations established, mainly in the polysymptomatic group, were anemia, hyperproteinemia, hyperglobulinemia, alterations in the albumin/globulin ratio and increased ALT activity. Renal alterations were not verified (urea and creatinine levels were normal). Thrombocytopenia was observed in three clinical groups. However, the other indicators of coagulation function (TAP and TTPA) did not have abnormal variations. There were inflammatory infiltrations and leishmania amastigotes in the skin of polysymptomatic dogs, however, they were not found in the skin of asymptomatic animals. Hypertrophy and hyperplasia of the phagocyte mononuclear system, leishmania amastigote parasites were found in the macrophages, extramedullary hematopoiesis and degenerative alterations were detected in the spleen and liver of 8 of the animals submitted to histopathological exams. In accord with these results, it was demonstrated that the expected alterations in the hematological and biochemical parameters in function of their viscerotropic nature of CVL are mainly observed in the more advanced stages of the disease. The absence of inflammatory infiltration and parasite load in the skin suggest that infected animals without symptoms may have an importance irrelevant to the infectiousness of the vector

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Avaliação gerontológica multidimensional das condições de saúde de idosos residentes em instituições de longa permanência

Introdução/objetivos: A avaliação do estado de saúde de idosos institucionalizados é considerada prática essencial à promoção e recuperação da sua saúde, a qual deve incluir a investigação de aspectos multidimensionais e multidisciplinares relacionados ao envelhecimento saudável. O estudo objetivou avaliar as condições de saúde dos idosos residentes em instituições de longa permanência (ILPI) do município de Natal RN. Métodos: Trata-se de um estudo descritivo, longitudinal, envolvendo seis ILPI filantrópicas, com uma população de 243 idosos. A coleta de dados se deu por meio de entrevistas com os idosos nas instituições mediante a aplicação de um questionário com informações sócio demográficas, saúde e institucionalização, além de várias facetas multidisciplinares que envolvem a escala de avaliação cognitiva (Mini Exame do Estado Mental); o índex de KATZ, para avaliação das atividades da vida diária e uma análise do estado nutricional com questões antropométricas (peso, estatura, circunferência abdominal) e Índice de Massa Corpórea. Participaram do estudo todos os idosos com idade igual ou superior a 60 anos, que aceitaram responder a entrevista e assinaram o Termo de Consentimento Livre e Esclarecido e/ou a impressão datiloscópica. O projeto foi aprovado pelo Comitê de Ética em Pesquisa da Universidade Federal do Rio Grande do Norte, sob parecer n° 164/2011. Resultados: Os participantes do estudo incluem 243 idosos, sendo a maioria mulheres (172 = 70,7%), com média de idade de 79 ± 9,44 anos. 124 idosos são solteiros (51,0%) e 66 viúvos (27,0%). A prática de atividades físicas não é rotina nas instituições, onde a maioria dos idosos (82,7%; n = 201) não realiza nenhum tipo de atividade. 78% dos idosos (n = 192) chegou a instituição sendo levados por familiares, enquanto que apenas 18% (n = 44 idosos) por vontade própria e 4% (n = 7 idosos) não souberam responder. Quanto aos aspectos cognitivos, identificou-se que 64,2% dos idosos (n = 156) apresentaram alterações significativas dentro da pontuação dos escores com restrições em responder aos demais questionamentos durante a entrevista por apresentarem limitações cognitivas e/ou dificuldades senso perceptivas.Conclusão: O presente estudo evidenciou alterações cognitivas na maioria dos idosos institucionalizados impossibilitando-os a continuidade da realização da avaliação global da saúde. A identificação correta da perda cognitiva em idosos é de suma importância para a equipe de saúde a fim de promover a detecção precoce de alterações cognitivas e a adoção de tratamento adequado, no sentido de contribuir para uma melhor qualidade de vida desta população

Design de interfaces para aplicativo de smartphone como recurso auxiliar no acompanhamento clínico de pacientes fibromiálgicos

Este trabalho tem como objetivo o desenvolvimento de interfaces com o usuário para aplicativo móvel smartphones com intuito de contribuir para a eficiência das atividades de profissionais e pesquisadores da área de fisioterapia ao oferecer suporte ao acompanhamento clínico da dor no tratamento de pacientes fibromiálgicos. Utilizando a abordagem de Design Centrado no Usuário - DCU, foram realizadas entrevistas e uma investigação contextual para a identificação inicial dos problemas e necessidades dos usuários. Verificou-se que as atividades de monitoramento e acompanhamento das sessões do tratamento de pacientes fibromiálgicos são, tradicionalmente, realizadas por meio de manipulando de formulários e fichas em papel (registro das condições de saúde do paciente) e escalas de classificação da dor em formato impresso (apresentadas ao paciente para indicação de sua dor percebida para cada ponto pré-determinado do corpo). Os procedimentos envolvidos nestas atividades dificultam o gerenciamento do desempenho do tratamento, o que, segundo relatos, reflete no comprometimento dos pacientes na adesão e frequência as sessões. A partir da observação e do levantamento das necessidades desses profissionais diante de suas atividades, foi proposto um aplicativo para smartphone com a intenção de minimizar os problemas ocasionados pelo uso das ferramentas convencionais e de prover informações rápidas acerca dos dados coletados. Então, seguindo a abordagem do DCU foi elaborado um modelo conceitual durante a etapa de concepção de soluções, o qual guiou a criação dos protótipos. A avaliação das interfaces do protótipo foi realizada com o envolvimento dos usuários a partir da técnica de avaliação cooperativa. Seus resultados proporcionaram o refinamento das interfaces e o desenvolvimento de uma nova proposta do design das interfaces em protótipo de alta fidelidade, produzido para o ambiente Android. Assim, esse trabalho faz parte do processo de desenvolvimento de um produto de software personalizado com foco na concepção e avaliação das interfaces com o usuário. Por meio da metodologia aplicada, observaram-se indícios os quais sugerem que as interfaces propostas apresentaram-se como um recurso facilitador e capaz de contribuir para eficiência das atividades no acompanhamento do tratamento de pacientes fibromiálgicos

Guiando almas femininas: a educação protestante da mulher em impressos confessionais no Brasil e em Portugal (1890-1930)

This paper treats confessional printings as a non formal space for the female education. It reflects on the importance of the woman s role to the diffusion of Protestantism in general, and its Presbyterian trend in particular, besides commenting on the proliferation of printings at the First Republic and its relation with education. In this study, Brazilian Northeastern is seen as a relevant space to the diffusion of Protestantism in Brazil; especially on what concerns the relations between Rio Grande do Norte and Pernambuco. Thereby some fountains were fundamental, as the confessional printings, that is, newspapers, magazines, prospects and other materials recollected in archives located in Natal/RN and Recife/PE, and São Paulo. It was also provided a brief incursion on Portuguese confessional printings kept in Oporto, PT. New Cultural History was chosen as theoretic-methodological guide, franchising ways inside the history of book and reading with the help of concepts like Interdependence, Social Configuration (ELIAS, 1993, 1994) and Representation (CHARTIER, 1990), considering that the survey worked out culture-manufactured products that is, intentional materials. It is well known that publishing, or better, the dissemination of printed material used to be associated to Protestants missionary practices since Reform began and, as what concerns the investigated period, in Portuguese and Brazilian lands indistinctly. Printing material in general books, booklets, fragments, as well as the press itself played a central role in divulging reformed ideas, their social options and the means of being and intervening in the world. In this regard, the confessional printings established themselves as an educative, although non schooled, informal space, but, all considered, relevant, seen that they dialogue with another important demand of that social group: formal, literate education. Because it dealt with the diffusion of a printed culture supported by the written word, it required of that group a different modus operandi: formal education. The first letters schools at first, then the high schools later represented spaces established for the circulation of printing material in order that they should be read, divulged and comprehended. This survey intends at last to take a look at Protestantism which, in this context of self-affirmation, reserved a specific place to woman by working out a non formal educational proposal disseminated by printing material. Three models were highlighted in the reformed proposal: Christian education in itself, household education, whose references of motherhood and care towards the neighbor were present and, at last, education to the public space, with emphasis on the practice of teaching. This study also offers a brief dialogue between Brazil and Portugal because, when some periodic printing, book or something like that got to be published in one margin of the Atlantic Ocean, the other margin surely was affected by that feat, received it, divulged it, corroborating the argument in support of the circulation of these printings. It was not only the same language that survived in both maritime coasts; some protestant specificities also crossed out along that sea

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Construção e validação de um receptor GPS para uso espacial

Global Positioning System, or simply GPS, it is a radionavigation system developed by United States for military applications, but it becames very useful for civilian using. In the last decades Brazil has developed sounding rockets and today many projects to build micro and nanosatellites has appeared. This kind of vehicles named spacecrafts or high dynamic vehicles, can use GPS for its autonome location and trajectories controls. Despite of a huge number of GPS receivers available for civilian applications, they cannot used in high dynamic vehicles due environmental issues (vibrations, temperatures, etc.) or imposed dynamic working limits. Only a few nations have the technology to build GPS receivers for spacecrafts or high dynamic vehicles is available and they imposes rules who difficult the access to this receivers. This project intends to build a GPS receiver, to install them in a payload of a sounding rocket and data collecting to verify its correct operation when at the flight conditions. The inner software to this receiver was available in source code and it was tested in a software development platform named GPS Architect. Many organizations cooperated to support this project: AEB, UFRN, IAE, INPE e CLBI. After many phases: defining working conditions, choice and searching electronic, the making of the printed boards, assembling and assembling tests; the receiver was installed in a VS30 sounding rocket launched at Centro de Lançamento da Barreira do Inferno in Natal/RN. Despite of the fact the locations data from the receiver were collected only the first 70 seconds of flight, this data confirms the correct operation of the receiver by the comparison between its positioning data and the the trajectory data from CLBI s tracking radar named ADOUR

Adaptação de um sistema automatizado para medição de microdureza

The hardness test is thoroughly used in research and evaluation of materials for quality control. However, this test results are subject to uncertainties caused by the process operator in the moment of the mensuration impression diagonals make by the indenter in the sample. With this mind, an automated equipment of hardness mensuration was developed. The hardness value was obtained starting from the mensuration of plastic deformation suffered by the material to a well-known load. The material deformation was calculated through the mensuration of the difference between the progress and retreat of a diamond indenter on the used sample. It was not necessary, therefore, the manual mensuration of the diagonals, decreasing the mistake source caused by the operator. Tension graphs of versus deformation could be analyzed from data obtained by the accomplished analysis, as well as you became possible a complete observation of the whole process. Following, the hardness results calculated by the experimental apparatus were compared with the results calculated by a commercial microhardness machine with the intention of testing its efficiency. All things considered, it became possible the materials hardness mensuration through an automated method, which minimized the mistakes caused by the operator and increased the analysis reliability

Impacto do abastecimento irregular de água nos altos índices de dengue

Dengue fever is an infectious disease that causes thousands of deaths each year in Brazil and other tropical countries. This work demonstrates that the irregularity in the supply of water by public water supply systems is a major factor that contributes to the proliferation of breeding sites of the mosquito that transmits dengue, due to the impossibility of removing water storage tanks. 31 points in the water supply network in thirteen districts of Natal, Brazil, were monitored by the installation of pressure gauges type Datalogger. The data about pressure showed deficiency in water supplies in many neighborhoods, forcing residents to accumulate water in tanks at ground level. In addition, It was observed that in neighborhoods with regular water supply, Infestation Index per type of container (ITR) of type A2 (Deposit ground level) was 0.00% and where there were failures in the supply of water , the ITR was high (above 50%). We believe that policies to combat dengue in Brazil should be reassessed so that more resources can be directed to the improvement of water supply systems and supply companies should be blamed for the problem too

Avaliação da flotação por ar dissolvido no polimento de efluentes de lagoa de estabilização

Experience in the use of stabilization ponds shows that this is a system with low cost, easy operation and maintenance and suitable for tropical countries. One of its disadvantages is due to high concentrations of suspended solids, mainly due to algal biomass in the effluents. Accordingly, the dissolved air flotation has been shown to be an efficient post-treatment technology. However, the efficiency of this process is related to coagulation and flocculation steps, as well as the adjustment of the involved variables in the process. The objective of this work was to evaluate the algae removal efficiency from wastewater stabilization ponds and the influence of the factors involved in the process using dissolved air flotation. For this, we used primary facultative and maturation effluents of ETE Ponta Negra in Natal. We did tests of coagulation, flocculation and flotation with the samples, using the equipment flotatest. In this process were tested coagulants aluminum sulfate and ferric chloride, and varied the factors pH, coagulant concentration, polymer concentration and rate of recirculation. At the end of the experiments were analyzed turbidity, suspended solids, color, COD and chlorophyll "a". These results were submitted to descriptive statistics to verify the efficiency of the process in general, and regression analysis to identify models that describe the process and demonstrate the factors that have greater influence on flotation. After step methodology, high values were found removal efficiency of suspended solids, reaching values greater than 90% in the best cases. It was concluded that flotation is more efficient in the facultative pond effluent using ferric chloride, and the variability of algae may negatively influence the process. Regression analyzes showed that pH is the most influential variable in the coagulation-flocculation-flotation, and its optimal value among the tested is 5.5 for both coagulants

"Tudo" em Natal : definitude, implicaturas e contribuições para o ensino de língua materna

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

O leitor universitário e a construção das práticas de ler e escrever textos impressos e digitais

The construction of a mapping of the practices of reading and writing printed and digital texts, declared by graduating students from the Bachelor s degree in Science and Technology (BCT), has provided us the analysis of the course they are making in such a socio-historical moment characterized by the revolution of the post-paper. In this sense, the general objective of this research is to understand how that construction works under the point of view of those graduating students. For this, our reflection has been guided by the search of answers for some questions which have presented to us: what reading and writing conceptions BCT graduating students have; what reading and writing practices those collaborators develop; what collections they declare to have access to; what differences they declare to have between printed and digital reading and writing along the different social roles they develop; what the reader/writer identity relations of those collaborators are. To achieving the plausible answers, we have gathered a corpus composed by texts of three genres of the argument order: academic profiles (or self-portrait), opinion articles and argumentative letters. Besides, we have made semi-structured interviews and questionnaires in the online tool of the Google Docs. The methodology which supports this academic work is the qualitative research (SIGNORINI; CAVALCANTI, 1998)of ethnographic direction (THOMAS, 1993; ANDRÉ, 1995) in Applied Linguistics (CELANI, 2000; MOITA-LOPES, 2006) and the theoretical contribution comes from the bakhtinian perspective of language conception (BAKHTIN [1929] 1981); the socio-historical writing construction (LÉVY, 1996; CHARTIER, R., 1998, 2002, 2007; COSCARELLI, 2006; CHARTIER, A., 2007; ARAÚJO, 2007; COSCARELLI; RIBEIRO, 2007; XAVIER, 2009; MARCUSCHI; XAVIER, 2010); from the studies of the pedagogy of the writing (GIROUX, 1997); from the literacy studies understood as sociocultural practice, plural and situated (TFOUNI, 1988; KLEIMAN, 1995; TINOCO, 2003, 2008; OLIVEIRA; KLEIMAN, 2008), from the studies about identity in postmodernity (HALL, 2003; BAUMAN, 2005). The results of the analysis have pointed at a multiplicity of reading/writing practices of printed and digital texts developed by the BCT graduating students due to the coexistence of the modality printed and that one derived from the new mobile devices. In that multiplicity, the prevalent idea of the collaborators is that there is a continuum between printed texts and digital texts (not a dichotomy), since the option of reading/writing printed texts or digital ones is always linked to specific communication situations, which involve participants, objectives, strategies, values, (dis)advantages, besides (re)creation of discursive genres in function of the mobile devices to which those collaborators have access in the different spheres of activities that they participate. All of that has caused a deep intersection in the identity traces of college students readers/writers in the 21st century which cannot be ignored by academic formation

Jornalismo cultural em texto, imagem e cor

O tema deste trabalho é o Jornalismo Cultural. Uma apresentação e discussão de temas pertinentes ao jornalismo especializado em cultura nas páginas do jornal diário. A partir da leitura de alguns jornais, se traça considerações gerais acerca dos caminhos do jornalismo e dos estudos sobre jornalismo com o objetivo de apresentar o jornal que hoje se produz no Brasil, em texto, imagem e cor. O resultado é a descoberta do jornal como forma, desde o texto, escolhas lexicais e sintáticas, passando pelas imagens, composição, escolha e determinação da pauta, ao arranjo destes elementos na página, em respeito ao projeto editorial de diagramação. A conclusão a que se chega que há vários "eus" que governam o jornal diário, e que fazem o jornalismo cultural inovador, porta de entrada às mudanças no jornalismo.

Das estantes para a tela: práticas de leitores de livros impressos e digitais do curso de Comunicação Social da Universidade Federal do Rio Grande do Norte

La cultura del libro impreso impregna la vida cotidiana de los lectores durante más de cinco siglos, y de esto, hábitos y significados a cerca del libro como medio de comunicación tienen sus raíces en la comunidad lectora, en una especie de contrato de lectura (VERÓN, 2004). Por lo tanto, creemos que es posible conjeturar que la aparición del libro digital puede cambiar las viejas prácticas en relación con el libro impreso y por eso mismo deben ser investigadas con el fin de entender este tiempo de productos reconfigurados. Consciente de ello, el tema central de nuestra investigación se basa en la comprensión de cómo los lectores de libros digitales realizan sus prácticas. Nuestro objetivo general es investigar las prácticas socioculturales de los lectores de libros digitales, con el fin de mostrar las continuidades y discontinuidades en el uso del libro en su formato impreso y digital. Con este fin, se busca 1) proponer una caracterización de la cultura del libro impreso, que es el apoyo a una asignación posible de las marcas de una cultura del libro digital, y 2) explorar los lugares de producción y oferta de los libros digitales, especialmente en Brasil, fin de delimitar en su primera configuración. Apoyamos, como propuesta metodológica, la sistematización de dimensiones culturales del libro impreso llamadas: ritualidad, simbología, materialidad y forma, lo que ayudará el enfoque del empírico. Nuestra propuesta se basa, en varios puntos, en los investigadores de la historia del libro, insertada en el campo de la Historia Cultural (BURKE, 2008; CHARTIER, 1992, 1994, 2006; DARNTON, 1990, 2006, 2010). Adoptamos como técnica de investigación el análisis de voces, registradas a través de entrevistas en profundidad, de lectores de libros en formato digital. Antes de eso, creemos apropiado emprender un estudio exploratorio basado en la aplicación de un cuestionario online. Nuestra delimitación incluye lectores de libros digitales del curso de Comunicación Social de la Universidad Federal de Rio Grande do Norte. Entre las conclusiones de esta disertación, es posible señalar que el grupo de lectores investigados está sólidamente ligado a las experiencias con los libros impresos y esto afecta en gran medida las prácticas de los libros digitales

Infografia interativa na redação: o processo de produção no Diário do Nordeste à luz da teoria do jornalismo

The infographics historically experience the process of evolution of journalism, from the incipient models handmade in the eighteenth century to the inclusion of computers and sophisticated software today. In order to face the advent of TV against of the partiality readers of the printed newspaper, or to represent the Gulf War, where not allowed photography, infographics reaches modern levels of production and publication. The technical devices which enabled the infographics to evolve the environment of the internet, with conditions for the manipulation of the reader, incorporating video, audio and animations, so styling of interactive infographics. These digital models of information visualization recently arrived daily in the northeast and on their respective web sites with features regionalized. This paper therefore proposes to explore and describe the processes of producing the interactive infographics, taking the example of the Diário do Nordeste, Fortaleza, Ceará, whose department was created one year ago. Therefore, based on aspects that guide the theory of journalism, as newsmaking, filters that focus on productive routine (gatekeeping) and the construction stages of the news. This research also draws on the theoretical framework on the subject, in concepts essential characteristics of computer graphics, as well as the methodological procedures and systematic empirical observations in production routines of the newsroom who can testify limitations and / or advances