Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project

Simulador de dano à formação, aplicado ao Projeto e à execução da perfuração de poços de petróleo

With the high oil price variability, the petroleum and the reservoir engineers are usually face to face on how they can evaluate the well performance and productivity. They can improve high productivity from the well construction to the secondary recoveries, but they have never tried a measurement in the drilling operations about the lower productivity index. As a rule, frequently the drilling operations hear from the reservoir engineering and geology that, if there is a formation damage, probably some drilling operations practices were not done properly or the good practice in petroleum engineering or mud engineering were not observed. The study in this working search is an attempt of how to measure a formation damage just from the project drilling to the drilling operations, with datum from the fields in Brazilian northeast and putting into practice a Simulator developed from the modeling on the theory offered by different experts and sources in formation damage

Pedagogia Freinet :mediação para o social, o político e a formação de professores

Ce projet présente dans son premier chapitre une étude historique-bibliographique basée sur la Pédagogie Freinet en France, ainsi que sa formation républicaine, ses courants politiques et idéologiques qui ont moulés l organisation sociale et éducationnelle de ce pays. Ce travail montre le rôle des courants de gauche dans ce processus, cela se reflète aussi sur le jeune Freinet. Les changements opérés dans la décennie de 1950 dans le système scolaire, dans le propre Mouvement Freinet et les ruptures qui ont eues à l intérieur de ce mouvement. Cela se termine avec les directions prises dans les dernières décennies, son arrivée au Brésil et les perspectives actuelles. Le deuxième chapitre aborde la reconstitution historique du Brésil dont sa phase coloniale et impériale. Les événements historiques de la IIIe, IVe et Ve République sont mis en relief avec ceux du Mouvement Freinet. La phase militaire imposée au Brésil et les luttes pour la reconquête de la démocratie. Il se termine avec les considérations sur la LDBEN 9394/96 et l implantation du Curso Normal Superior; un bref historique de la Pédagogie Freinet au Brésil, des thèmes importants travaillés dans le troisième chapitre. Dans ce chapitre une recherche qualitative est décrite basée dans l Etnographie Critique et Multiréférentiellel et aussi dans la Recherche-Action. Elle est développée auprès d un groupe de cinq professeurs des premières classes de l école primaire au collège, inscrites dans le Curso Normal Superior. Les données ont été obtenues à partir de rencontres régulières avec le groupe la médiation didactique , des entretiens, des questionnaires, des observations dans les salles de classe, du travail final du cours, nommé Mémorial de Formation. À travers l ensemble des données, on recherche les apports et l actualité d une proposition pédagogique historiquement firmée pour le développement de la praxis éducative

Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on this subject emphasizing the thermal cyclic behavior imposed by the milling process as the main responsible for thermal cracks formation have been published. In these cases, the phenomenon appears as a consequence of the difference in temperature experienced by the cutting tool with each rotation of the cutter, usually defined as the difference between the temperatures in the cutting tool wedge at the end of the cutting and idle periods (T factor). Thus, a technique to minimize this cyclic behavior with objective of transforming the milling in an almost-continuous process in terms of temperature was proposed. In this case, a hot air stream was applied into the idle period, during the machining process. This procedure aimed to minimize the T factor. This technique was applied using three values of temperature from the hot air stream (100, 350 e 580 oC) with no cutting fluid (dry condition) and with cutting fluid mist (wet condition) using the hot air stream at 580oC. Besides, trials at room temperature were carried out. Afterwards the inserts were analyzed using a scanning electron microscope, where the quantity of thermal cracks generated in each condition, the wear and others damages was analyzed. In a general way, it was found that the heating of the idle period was positive for reducing the number of thermal cracks during face milling with cemented carbide inserts. Further, the cutting fluid mist application was effective in reducing the wear of the cutting tools.

Desenvolvimento de uma unidade laboratorial para quantificação de BTX como poluentes atmosféricos, usando microextração em fase sólida

This dissertation aims the development of an experimental device to determine quantitatively the content of benzene, toluene and xylenes (BTX) in the atmosphere. BTX are extremely volatile solvents, and therefore play an important role in atmospheric chemistry, being precursors in the tropospheric ozone formation. In this work a BTX new standard gas was produced in nitrogen for stagnant systems. The aim of this dissertation is to develop a new method, simple and cheaper, to quantify and monitor BTX in air using solid phase microextraction/ gas chromatography/mass spectrometry (SPME/CG/MS). The features of the calibration method proposed are presented in this dissertation. SPME sampling was carried out under non-equilibrium conditions using a Carboxen/PDMS fiber exposed for 10 min standard gas mixtures. It is observed that the main parameters that affect the extraction process are sampling time and concentration. The results of the BTX multicomponent system studied have shown a linear and a nonlinear range. In the non-linear range, it is remarkable the effect of competition by selective adsorption with the following affinity order p-xylene > toluene > benzene. This behavior represents a limitation of the method, however being in accordance with the literature. Furthermore, this behavior does not prevent the application of the technique out of the non-linear region to quantify the BTX contents in the atmosphere.

Influência da intensidade de aeração na formação do floco de lodo ativado e na eficiência de remoção de matéria orgânica

In wastewater treatment, activated sludge systems have been a technology widely applied as secondary treatment. During this step, which has a strong biological aspect, it is necessary to introduce oxygen supply for the maintenance of metabolic activity of the bacteria through the aerators. Aeration devices are responsible for most of the energy consumption in this stage. In this background, the influence of three aeration intensities (atmospheric air flow 3.5, 7.0 and 10.5 L.min-1) and the concentration of dissolved oxygen (DO) on the dimension of activated sludge flocs as well as on the efficiency of organic matter removal were assessed using a traditional activated sludge system which was fed with synthetic domestic wastewater. Samples were taken weekly from the three units that make up the system feed, aeration and storage tank in order to verify the Chemical Oxygen Demand (COD). It was established the process efficiency through a comparison between the initial and final COD. Besides the parameters already mentioned, this monitoring work on activated sludge batch system was also observed by Mixed Liquor Suspend Solids (MLSS), Volatile Suspend Solids (VSS), pH and temperature measures. The results have showed a maximum removal efficiency around 75% in the first aeration sequence and approximately 85% for the second and third one. For the first aeration, the DO concentration remained higher than 3.0 mg.L-1 and a diameter range from 10 to 60 μm was observed. In the second e third sequence, the DO concentration remained higher than 4.0 mg.L-1 with a diameter range of 10 until 200 μm. Although the sequence 1 and 2 have presented similar performances for organic matter removal, the sequence 2 promoted a regular floc size distribution and with lower values of Sludge Volumetric Index (SVI) meaning a better flocculating ability. In addition, the results reaffirmed what the literature has reported: higher DO concentrations produce flocs with greater dimensions

Eensino de língua portuguesa: da formação do professor à sala de aula

La reflexión crítica sobre la escuela y los quehaceres docentes ha favorecido la producción y la sistematización de nuevos saberes basados en fundamentos científicos, principalmente sobre las prácticas pedagógicas. En la enseñanza de Lengua Portuguesa, las investigaciones buscan comprender lo qué y cómo se enseña y se aprende durante la escolarización. En esa perspectiva, realizamos un estudio sobre la formación del profesor de Lengua Portuguesa y sus implicaciones en la clase, buscando observar la actuación de los alumnos-maestros en el contexto escolar, durante la realización de las Prácticas. Para tanto, elegimos como objetivo general, investigar cómo la carrera de Filología de la UFRN/CERES/Campus de Currais Novos promovía la formación de futuros profesores para atender a las expectativas de las políticas públicas para la enseñanza de Lengua Materna. Como referencial teórico, estudiamos los PCN, el proyecto político pedagógico de la carrera y autores del área de enseñanza de Lengua Portuguesa y de Educación, entre ellos, Geraldi (1996), Travaglia (1996, 2003), Antunes (2003, 2007, 2009 y 2010), Lomas (2003), Figueiredo (2005), Marcuschi (2001, 2008), Oliveira (2010), Riolfi et al. (2008), Possenti (2003), Alarcão (1996, 2001) Imbernón (2011), Pimenta y Lima (2010) y Schön (1993). El estudio está situado en el ámbito de la Lingüística Aplicada y se caracteriza como investigación cualitativa de naturaleza interpretativista, a partir de un abordaje de inspiración etnográfica del ambiente de las Prácticas. En los resultados constatamos que los alumnos-maestros privilegian la enseñanza prescriptiva, fundamentado en una concepción de lengua como sistema, direccionando la enseñanza de la lengua para la dirección contraria al abordaje funcionalista (lengua / uso), distanciándose considerablemente de la propuesta de formar un alumno crítico y agente de transformación. Respecto a la visión de los alumnos-maestros sobre la carrera, fueron listadas algunas cuestiones relevantes, entre ellas, los contenidos que hacen parte de la carrera, la distribución de la carga horaria de los componentes curriculares, la revisión de las ementas, la oferta de asignaturas de inclusión social, la reorganización de las actividades de la práctica en relación al acompañamiento y orientación a los alumnos-maestros y, especialmente, la desarticulación teoría / práctica que fue considerada como responsable por muchas de las dificultades encontradas por los referidos alumnos en la fase de regencia de clase en la enseñanza de Lengua Portuguesa en los niveles de enseñanza fundamental y media. De ese modo, a partir del análisis de estos significados construidos por los alumnos-maestros sobre el proceso de formación en esa carrera de Letras, constatamos la necesidad de una revisión del proyecto de la carrera, pues éste presenta esas fragilidades que necesitan ser analizadas en función de la mejoría de la calidad de la enseñanza de la graduación

Contribuições do Programa Institucional de Bolsas de Iniciação Científica (PIBIC) para a formação do aluno de psicologia

The undergraduate courses in Psychology have been historically pointed as defective in aspects related to the critical education and the integration between theory and practice. Hence, the scientific education has been considered a possibility to overcome those lacks. Therefore, this study has investigated the undergraduate education process of Psychology students with PIBIC (Portuguese acronym for Undergraduate Scientific Research Scholarships Institutional Program) scholarships from CNPq (Portuguese acronym Brazilian National Council of Scientific and Technological Development). The scholarship program has been a strategic tool for the undergraduate scientific research. Electronic questionnaires have been sent to all the PIBIC scholarship students of Psychology in Brazil (622; 104 have answered), containing questions about the program developed activities, tutoring and advising, PIBIC evaluation and other ones. The students scientific and academic production has also been investigated through their Lattes (CNPq s Platform in which researchers have their academic résumés). The major part of the participants (70%) has stated that the first motivation to be in the program had been their interest in the research or in the academic career. Furthermore, 60% of the scholarship students has worked as volunteers before receiving PIBIC scholarship. Among the students who have answered the research, 65,4% has reported they are tutored directly by their advisors, and 80% of them attends one or more than one advising meeting every fifteen days. It has been identified that the Psychology scholarship students do not participate in all the research activities and that the proximity with the advisor is related to the accomplishment of tasks which contributes with the student critical and reflexive education. Finally, less than 25% of the students has published scientific articles or book chapters during the scholarship, what XI demonstrates a possible exclusion of them in that phase of the process. In general, the scholarship students evaluate the program positively by revealing that it contributes with their professional and academic education. For those reasons, it is observed PIBIC s potential role for the undergraduate education in order to develop more critical psychologists able to propose innovations and contextualized practices. However, the results obtained in programs like the studied one denounce the disqualification of the provided undergraduate education for the major part of the university students, who do not have a PIBIC scholarship. As a result, it is emphasized that it there should be more investment for improving the quality of the undergraduate education itself and not only for programs which are available for few students

Estudo de um compósito Nb-15%pCu obtidos por moagem de alta energia e sinterizados por fase líquida

There is great difficulty in forming a composite refractory metal niobium with copper. This is due to the fact that Nb-Cu system is almost mutually immiscible and may be neglected solubility between them. These properties hinder or prevent obtaining homogeneous and high-density structures, conventionally prepared. This study aims to analyze the use of high-energy milling process (MAE) to implement these natural difficulties, with regard to the densification of the sintered bodies. The MAE and the press were used in the preparation of powders, to obtain a fine and homogeneous distribution of the grain size. Four loads Nb and Cu powders containing 15% by weight of Cu were then milled for MAE in a planetary type ball mill under various milling times and speeds. The results obtained by MAE were analyzed by scanning electron microscopy (SEM), according to the parameters of time and grinding speed. The samples were compacted under pressure of 200 MPa, were then sintered in liquid phase in a vacuum furnace at temperatures of 1100 ° C / 60 min and 1200 ° C / 60 min. Then it was used to characterize diffraction of X-rays to identify the phases. The microstructures of the sintered samples were observed and evaluated using scanning electron microscopy (SEM). Vickers Microhardness tests were performed, obtaining higher values for the sintered bodies in the largest of the post milling times and the larger grinding speeds. It was found that the liquid phase sintering of the samples that were processed by MAE produced at the end of a homogeneous and densified structure in 77,4% relative to the value of the theoretical density of the composite

Avaliação do controle da diagênese na qualidade de reservatório siliciclástico do cenomaniano superior da formação Açu, sudoeste da bacia potiguar

The distribution of diagenetic alterations in Late Cenomanian siliciclastic reservoirs from Potiguar Basin was influenced by the stratigraphic framework and the depositional system. Seismic sections and geophysical logs of two wells drilled in the SW portion of the mentioned basin above register regional stratigraphic surfaces representing maximum floods related to a transgressive event. The sequential analysis of 80 m of drill core (~450 m deep) recognized nine depositional facies with an upwards granodecrescent standard piling that limits cycles with an erosional conglomeratic base (lag) overlain by intercalations of medium to very fine sandstones showing cross bedding (channel, planar and low angled) and horizontal bedding (plane-parallel , wave and flaser). The top of the cycles is marked by the deposition of pelites and the development of paleosoils and lagoons. The correlation of genetically related facies reveals associations of channel fillings, crevasse, and flood plains deposited in a transgressive system. Detailed descriptions of seventy nine thin sections aided by MEV-EBSD/EDS, DRX and stable isotope analyses in sandstones revealed an arcosian composition and complex textural arrays with abundant smectite fringes continuously covering primary components, mechanically infiltrated cuticles and moldic and intragrain pores. K-feldspar epitaxial overgrowth covers microcline and orthoclase grains before any other phase. Abundant pseudomatrix due to the compactation of mud intraclasts concentrate along the stratification planes, locally replaced by macrocristalline calcite and microcrystalline and framboidal pyrite. Kaolinite (booklets and vermicular), microcrystalline smectite, microcrystalline titanium minerals and pyrite replace the primary components. The intergrain porosity prevails over the moldic, intragrain and contraction porosities. The pores are poorly connected due to the presence of intergranular smectite, k-feldspar overgrowth, infiltrated mud and pseudomatrix. The sandstones were subjected to eodiagenetic conditions next to the surface and shallow burial mesodiagenetic conditions. The diagenetic alterations reduced the porosity and the permeability mainly due to the precipitation of smectite fringes, compactation of mud intraclasts onto the pseudomatrix and cementing by poikilotopic calcite characterizing different reservoir petrofacies. These diagenetic products acted as barriers and detours to the flow of fluids thus reducing the quality of the reservoir.

Estudo da transição de fase da percolação através da entropia da informação

Various physical systems have dynamics that can be modeled by percolation processes. Percolation is used to study issues ranging from fluid diffusion through disordered media to fragmentation of a computer network caused by hacker attacks. A common feature of all of these systems is the presence of two non-coexistent regimes associated to certain properties of the system. For example: the disordered media can allow or not allow the flow of the fluid depending on its porosity. The change from one regime to another characterizes the percolation phase transition. The standard way of analyzing this transition uses the order parameter, a variable related to some characteristic of the system that exhibits zero value in one of the regimes and a nonzero value in the other. The proposal introduced in this thesis is that this phase transition can be investigated without the explicit use of the order parameter, but rather through the Shannon entropy. This entropy is a measure of the uncertainty degree in the information content of a probability distribution. The proposal is evaluated in the context of cluster formation in random graphs, and we apply the method to both classical percolation (Erd¨os- R´enyi) and explosive percolation. It is based in the computation of the entropy contained in the cluster size probability distribution and the results show that the transition critical point relates to the derivatives of the entropy. Furthermore, the difference between the smooth and abrupt aspects of the classical and explosive percolation transitions, respectively, is reinforced by the observation that the entropy has a maximum value in the classical transition critical point, while that correspondence does not occurs during the explosive percolation.

Estudo da transição de fase da percolação através da entropia da informação

Various physical systems have dynamics that can be modeled by percolation processes. Percolation is used to study issues ranging from fluid diffusion through disordered media to fragmentation of a computer network caused by hacker attacks. A common feature of all of these systems is the presence of two non-coexistent regimes associated to certain properties of the system. For example: the disordered media can allow or not allow the flow of the fluid depending on its porosity. The change from one regime to another characterizes the percolation phase transition. The standard way of analyzing this transition uses the order parameter, a variable related to some characteristic of the system that exhibits zero value in one of the regimes and a nonzero value in the other. The proposal introduced in this thesis is that this phase transition can be investigated without the explicit use of the order parameter, but rather through the Shannon entropy. This entropy is a measure of the uncertainty degree in the information content of a probability distribution. The proposal is evaluated in the context of cluster formation in random graphs, and we apply the method to both classical percolation (Erd¨os- R´enyi) and explosive percolation. It is based in the computation of the entropy contained in the cluster size probability distribution and the results show that the transition critical point relates to the derivatives of the entropy. Furthermore, the difference between the smooth and abrupt aspects of the classical and explosive percolation transitions, respectively, is reinforced by the observation that the entropy has a maximum value in the classical transition critical point, while that correspondence does not occurs during the explosive percolation.

O significado da educação popular na formação dos trabalhadores de saúde: estudo com base em experiências de extensão universitária

A Saúde do Trabalhador (ST) refere-se a um campo do saber que compreende as relações entre o trabalho e o processo saúde/doença de modo articulado a um corpo de práticas teóricas interdisciplinares. No contexto das possibilidades para se efetivar a ST na amplitude que exige este conceito, diferentes iniciativas de Educação Popular em Saúde se articulam com demandas do Controle Social em Saúde, permitindo novas abordagens para configurar a formação crítica e ativa de trabalhadores de saúde e movimentos sociais no mosaico das políticas de ST. Nessa direção, os projetos de extensão universitária orientados pela Educação Popular têm desvelado caminhos metodológicos e novas possibilidades teóricas de pensar a Atenção à Saúde do Trabalhador, de forma articulada com a necessidade de re-significar o processo de formação dos profissionais da saúde, com ênfase no cuidado integral na atenção à saúde. O estudo promovido por ocasião do Doutoramento em Ciências da Saúde propiciou a avaliação do impacto e da potência das ações destes projetos na reorientação do cuidado guiado pela educação popular no campo da saúde do trabalhador. A sistematização foi utilizada como principal estratégia metodológica para a produção dos dados analisados, além de estratégias de pesquisa qualitativa como constituintes da fase exploratória do estudo, tendo como técnica central, nesse sentido, o grupo focal. Os resultados mostraram mudanças significativas no processo do cuidar em saúde guiado pela educação popular, A reorientação de práticas e saberes, coadunadas aos princípios fundamentais do Sistema Único de Saúde, foi observada nos sujeitos que participaram da experiência. A sistematização da experiência permitiu ainda concluir que estratégias de diálogo, organização político-social e troca de experiências de vida se apresentam como cenário significativo no compartilhamento de cultura e saúde do trabalhador, oportunizando crescimento coletivo e melhor qualidade de vida.

Papel da extensão e do trabalho junto à comunidade na formação médica

SILVA, Thiago Demétrio Nogueira Costa e; CORRÊA, Edison José; MARANHÃO, Técia Maria de Oliveira. O papel da extensão e do trabalho junto à comunidade na formação Médica. Revista Eletrônica Pesquisa Médica, v.1, n.3, p.9-13, jul./set. 2007