Estudo da influência da adição de níquel em alumina pela rota da metalurgia do pó

Ceramic materials alumina basis have been widely used in structural components, mainly because owning properties such as high hardness, chemical inertness and good wear resistance, however, the low toughness is a factor that compromises its use in many other applications, featuring the addition of nickel as a possible solution to this problem, in this context, this work aims to study the addition of nickel alumina using the route of powder metallurgy processing of the material. The percentage of nickel were added 2, 4 and 6 wt%; and each composition to high energy milling in a planetary mill was performed for 2, 4, 9 and 16h. Subsequently, the samples were compacted at 300 MPa and sintered in a vacuum oven at 1400⁰C for 2h. The samples were characterized as the physical and mechanical properties, observing, in general, an improvement in sinterability of the material with increasing grinding time and nickel content, and mixing with a decrease of porosity and increase of hardness, density values above 80% of theoretical were obtained. The milling time of 4 hours and addition of 2% nickel, particularly if achieved higher hardness (HV 1068.7 +/- 32.6) and density of about 99% theoretical density.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Efeito da adição de WC e Co na sinterização e propriedades mecânicas da alumina

Composites based on alumina (Al2O3), tungsten carbide (WC) and cobalt (Co) exhibit specific properties such as low density, high oxidation resistance, high melting point and high chemical inertia. That composite shows to be a promising material for application in various fields of engineering. In this work, the mechanical properties of the composite (Al2O3 – WC – Co), particularly density and hardness, were evaluated according to the effects of the variables of powder processing parameters, green compact and sintered. Powder composites with the composition of 80 wt% Al2O3, 18 wt% WC and 2 wt% Co were processed by high energy ball milling in a planetary mill for 50 hours as well as mixed by manual mixing in a glass vessel with the same proportion. Samples were collected (2, 10, 20, 30, 40 and 50 hours) during the milling process. Then, the powders were compacted in a cylindrical die with 5 mm in diameter in a uniaxial press with pressures of 200 and 400 MPa. The sintering was in two stages: first, the solid phase sintering was performed at 1126 and 1300 °C for 1 hour with a heating rate of 10 °C/min in a resistive furnace under argon atmosphere for green samples compacted in 200 and 400 MPa; the second sintering was performed on dilatometer in solid phase at 1300 °C for green sample compacted in 200 MPa, another sintering also was performed on dilatometer, this time in liquid phase at 1550 °C for green samples compacted in 200 and 400 MPa, with the same parameters used in resistive furnace. The raw materials were characterized by X – ray diffraction (XRD), X – ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and laser particlemeter. The sintered samples were subjected to microhardness testing. The results showed that high energy milling achieved to the objectives regarding the particle size and the dispersion of composite phases. However, the hardness did not achieve to significant results, this is an indication that the composite has low fracture toughness.

Transição demográfica e a questão educacional: uma abordagem para o ensino médio do Rio Grande do Norte

Due to demographic transition process, the educational public sector politics formers encounter a highly specific demographic situation because, nowadays, despite the demographic transition, population is still growing because of the demographic inertia; however, due to steady decline in fertility, young population tends to decrease in next years. In this way, aiming to make high school widely accessible in the country, the issue of education quality is highlighted as well the importance of the physical structure of schools and their teaching equipments to confirm a favorable or not environment for developing educational processes. In this way, this work aims to relate the enrollment of students as school types with the demand of young people who will be able to attend high school on the Rio Grande do Norte state by the year of 2020, emphasizing teaching unities structural aspects, from a school profiling to the design of three prospective alternatives. So, from INEP's Scholar Census data and IBGE population's projections, this work is composed by four stages: i) literature review about research related subjects; ii) database design and build; iii) school profiling; and, iv) prospective alternatives creation. As results, three alternatives relate potential demand and enrollment using the built profiles and they are: i) “Alternative A” attends PEE's requirements related to demands but do not provide improvements in the school structural aspects; ii) “Alternative B” points into an increase of enrollment offering to the detriment of school's structural conditions which are offered to these students; iii) “Alternative C” propitiates a quantitative enrollment increasing combined with improvements on school's physical structure. These alternatives help to support decision making related to goals and realization of universal access with physical conditions which are necessary to a favorable environment to educational activity development.

Conselho Municipal de Saúde de Pedras de Fogo - PB: um estudo sobre participação

The present study aims to understand the process of Participation of the Health Council- CMS in the formularization, implementation and control of the Municipal health plan of Pedras de Fogo, through four criteria of quality of participation considered by Demo (1993): representation, legitimacy, base participation, and self-responsibility. The criteria of representation is related to the quality of politics of the representative over the representings. Legitimacy is related to the politics` quality of the process of participation based on norms and rules that stipulate the participation, the base participation is a necessary political support so that the power authorization directed to the representings can be effective and the self-responsibility refers to the capacity of being responsible when it concerns to the public service or property. Through the descriptive and exploratory study a qualitative method was adopted to consider the conditions of the participation of the twelve council members of the City council of Health of Pedras de Fogo, through a formulated Instrument based on the criteria of DEMO (1993). It was concluded that the quality of the participation of the council members of the CMS of Pedras de Fogo understands essential aspects of the criteria of quality considered by Demo (1993) but it shows fragilities as unfamiliarity with the norms that legitimize the performance of the council; unfamiliarity of its condition of being an agent and the importance of the participation of the base for the reinforcement of its participation, as well as inertia related to the check and rendering of accounts on its performance. This way it makes sense that the participation of the council in the four criteria of quality of politics considered in this paper needs to improve

UBS RN-7: proposta arquitetônica para um padrão flexível de unidade básica de saúde para a zona bioclimática 7 do RN, com ênfase na sustentabilidade ambiental

Standardization and sustainability: these two apparently antagonistic words find the challenge of uniting in a flexible architectonic proposal. This was the idea that motivated the proposal of this assignment, whose appearing is bound up with the necessity of thinking about standardized spaces that attend on functional criterias and environmental sustainability, in reply to an existing real demand. The assignment consists of an architectonic proposal for a flexible standard of a Basic Unit of Health for the bioclimatic zone 7 of RN (UBS RN-7), with emphasis in the environmental sustainability. The project contemplates innumerable involved variables, such as: obedience to the current law of the Health Ministry for the UBSs; formal/aesthetic aspects; criterias of expansiveness of the UBS I for the UBS II; relative aspects to the constructive rationality and, mainly, sustainability aspects. With the intention to unite the variables and, also, glimpsing a proposal that could reach a good functional performance, aesthetic, of environment comfort and energetic efficiency, it was also necessary to consider concepts about the flexibility of the envelopment. The elaboration of the architecture first draft was based on bibliographical research, conceptual studies and references, elaboration of the architectonic program and the draft development for the UBS port I and the UBS port II. To the end, an implantation data sheet for the project is proposed for the UBS standard project, where strategies of thermal isolation, shadowing and thermal inertia are adopted and combined to three possible types of lot, resulting in 24 possibilities of implantation