Estudo do acoplamento entre superfícies seletivas de frequência assimétricas em estruturas de multicamadas

This work presents the development of new microwaves structures, filters and high gain antenna, through the cascading of frequency selective surfaces, which uses fractals Dürer and Minkowski patches as elements, addition of an element obtained from the combination of the other two simple the cross dipole and the square spiral. Frequency selective surfaces (FSS) includes a large area of Telecommunications and have been widely used due to its low cost, low weight and ability to integrate with others microwaves circuits. They re especially important in several applications, such as airplane, antennas systems, radomes, rockets, missiles, etc. FSS applications in high frequency ranges have been investigated, as well as applications of cascading structures or multi-layer, and active FSS. In this work, we present results for simulated and measured transmission characteristics of cascaded structures (multilayer), aiming to investigate the behavior of the operation in terms of bandwidth, one of the major problems presented by frequency selective surfaces. Comparisons are made with simulated results, obtained using commercial software such as Ansoft DesignerTM v3 and measured results in the laboratory. Finally, some suggestions are presented for future works on this subject

Estudo comparativo de técnicas de cascateamento de superfícies seletivas em frequência

This work presents a theoretical and numerical analysis for the cascading of frequency selective surfaces, which uses rectangular patches and triangular Koch fractals as elements. Two cascading techniques are used to determine the transmission and reflection characteristics. Frequency selective surfaces includes a large area of Telecommunications and have been widely used due to its low cost, low weight and ability to integrate with others microwaves circuits. They re especially important in several applications, such as airplane, antennas systems, radomes, rockets, missiles, etc.. FSS applications in high frequency ranges have been investigated, as well as applications of cascading structures or multi-layer, and active FSS. Furthermore, the analyses uses the microwave circuit theory, with the Floquet harmonics, it allows to obtain the expressions of the scattering parameters of each structure and also of the composed structure of two or more FSS. In this work, numeric results are presented for the transmission characteristics. Comparisons are made with experimental results and simulated results using the commercial software Ansoft Designer® v3. Finally, some suggestions are presented for future works on this subject

Construção e validação de um receptor GPS para uso espacial

Global Positioning System, or simply GPS, it is a radionavigation system developed by United States for military applications, but it becames very useful for civilian using. In the last decades Brazil has developed sounding rockets and today many projects to build micro and nanosatellites has appeared. This kind of vehicles named spacecrafts or high dynamic vehicles, can use GPS for its autonome location and trajectories controls. Despite of a huge number of GPS receivers available for civilian applications, they cannot used in high dynamic vehicles due environmental issues (vibrations, temperatures, etc.) or imposed dynamic working limits. Only a few nations have the technology to build GPS receivers for spacecrafts or high dynamic vehicles is available and they imposes rules who difficult the access to this receivers. This project intends to build a GPS receiver, to install them in a payload of a sounding rocket and data collecting to verify its correct operation when at the flight conditions. The inner software to this receiver was available in source code and it was tested in a software development platform named GPS Architect. Many organizations cooperated to support this project: AEB, UFRN, IAE, INPE e CLBI. After many phases: defining working conditions, choice and searching electronic, the making of the printed boards, assembling and assembling tests; the receiver was installed in a VS30 sounding rocket launched at Centro de Lançamento da Barreira do Inferno in Natal/RN. Despite of the fact the locations data from the receiver were collected only the first 70 seconds of flight, this data confirms the correct operation of the receiver by the comparison between its positioning data and the the trajectory data from CLBI s tracking radar named ADOUR

Método dinâmico aplicado para antenas cilíndricas

Nowadays there has been a major breakthrough in the aerospace area, with regard to rocket launches to research, experiments, telemetry system, remote sensing, radar system (tracking and monitoring), satellite communications system and insertion of satellites in orbit. This work aims at the application of a circular cylindrical microstrip antenna, ring type, and other cylindrical rectangular in structure of a rocket or missile to obtain telemetry data, operating in the range of 2 to 4 GHz, in S-band. Throughout this was developed just the theoretical analysis of the Transverse transmission line method which is a method of rigorous analysis in spectral domain, for use in rockets and missiles. This analyzes the spread in the direction "ρ" , transverse to dielectric interfaces "z" and "φ", for cylindrical coordinates, thus taking the general equations of electromagnetic fields in function of e [1]. It is worth mentioning that in order to obtain results, simulations and analysis of the structure under study was used HFSS program (High Frequency Structural Simulator) that uses the finite element method. With the theory developed computational resources were used to obtain the numerical calculations, using Fortran Power Station, Scilab and Wolfram Mathematica ®. The prototype was built using, as a substrate, the ULTRALAM ® 3850, of Rogers Corporation, and an aluminum plate as a cylindrical structure used to support. The agreement between the measured and simulated results validate the established processes. Conclusions and suggestions are presented for continuing this work

Diagnóstico regional do processo de queijo coalho comercializado em Natal/RN

Coalho cheese is a typical product of the Northeastern Brazil, which is consumed both raw and cooked. The present work aimed to study the characteristics of artisanal and industrial processes in the production of coalho cheese sold in Natal / RN in order to evaluate its quality and consumer s profile. Four artisanal cheeses plants were monitored and a questionnaire was sent to different cheese industries. Besides this, eight cheese samples (four artisanal and four industrial) were evaluated in regard to the microbiological quality, physical-chemical and sensory attributes. The sensory acceptance was evaluated by using 108 non-trained panelists by using the hedonic scale. The consumer s profile survey was applied to 400 consumers of coalho cheese. The lack of hygiene control was detected at the artisanal cheese production, which uses raw milk as its raw material. Research has shown that the industrialized cheeses are made from pasteurized milk provided by their own production or by a third party, as observed in cheese making dairies. In general, the results indicate variation in the manufacturing process of coalho cheese, which results in the lack of product standardization. Regarding the physical-chemical analysis, most artisanal and industrial samples presented moisture content between 36 and 40 %, classified as medium moisture cheese, which is the only parameter that showed no significant difference (p>0.05). However, the water activity (Aw), pH and acidity results differed significantly. All artisanal samples showed coliform contamination at 35 °C, which confirms the poor hygienic conditions. In regard to coliforms at 45 °C, 75 % of artisanal coalho cheese samples had value higher than 103 MPN / g, a value above the lawful limits determined by RDC nº 12. Fifty percent of industrial coalho cheese samples showed coagulase-positive Staphylococcus values above the limit allowed by the RDC nº 12, indicating poor handling. The sensory evaluation revealed that the taste was the only parameter that showed significant difference, and this difference was only between two industrial brands. The consumer s survey showed that the coalho cheese flavor is the most important reason for buying this kind of cheese. Although coalho cheese is mainly bought in supermarkets, open street markets and country shops are still important selling points. It is concluded that there is no coalho cheese standardization in the RN state, which leads to variations in physical-chemical and sensory attributes. Moreover, it is necessary greater hygiene control in the production and handling procedures of coalho cheese.

As Ciências Espaciais, o saber e o fazer docente no ensino fundamental

This study aims to include topics related to Space Science in elementary education from an experiment that aims to rescue the science teachers in public schools of São Tomé, RN, a taste for experimentation and exploration of advanced technologies. During this research with teachers found that they knew enough about the subject, but this knowledge was restricted to the events disclosed by the media. Regarding scientific knowledge, that same surface, they had many conceptual difficulties which hindered the approach of these topics in their classes. To overcome this difficulty, a workshop was held where teachers had the opportunity to discuss the historical aspect of Space Science, some physical concepts related to it, and the conduct of experiments with PET bottle rockets that recover from the curiosity typical of how the science. The results were outlined in the form of Planning Didactic built by teachers and using themes related to space science, from there, discussing content already provided in the composition of the schools curriculum. Therefore, this work allowed the teachers a minimum training required for them to not only reproduce, but readjusted and build, from this, their own paths in the classroom at the fundamental level

No céu da boca das gentes, tem estrela e maravilhas: atualização e permanência das narrativas populares nos contos de enganar a morte

This current study consists in an analysis of the work Contos de enganar a morte (2004), of the novelist, illustrator and researcher of popular culture Ricardo Azevedo, aiming to highlight aspects and elements present in this work which show the update and the permanence of traditional popular narratives, widespread by orality, especially those collected by the Luís da Câmara Cascudo in Literatura oral no Brasil (1984), linked to the category of the Cycle of the Death and Tales of the Deceived Demon. It is argued that the symbolic, playful, humor and aspects of orality, evident in these narratives are cultural possessions own of a popular tradition that diffuses, is updated and maintained by the memory of handmade anonymous narrators (BENJAMIN, 1994), poets and brazilian singers of cordel, holders of the traditional knowledge not established, but polyphonic, dialogical and democratic in essence (BAKHTIN, 1996). Still, alongside the people who know and counts the stories of Trancoso and Fairies, the tale, as a written literary genre, has allowed to maintain outstanding the same subjects successively renewed, enabling the resistance of popular narrative tradition and understanding and appreciation of popular orality (ZUMTHOR, 1993; 2000) and of the updates performed in the contemporarity (CANDIDO, 1976), without losing sight of the singularity and autonomy of the literary work

Influência espaço-temporal e fisiológica na absorção de nutrientes e elementos tóxicos por Eichhornia crassipes visando o uso adequado da sua biomassa: o caso do Rio Apodi/Mossoró - RN

This study aims to determine the amount of nutrients and toxic elements in aquatic macrophytes of species Eichhornia crassipes present in River Apodi/Mossoró - RN and check some of the possibilities of using the biomass produced, based on the influence of space - temporal and physiological absorption of nutrients by plants. For this, was determined: Leaf area, Leaf wet mass, Leaf dry mass, Real humidity, Apparent humidity, Ash, Total nitrogen, Crude protein, Calcium, Magnesium, Potassium, Total phosphorus, Sodium, Iron, Copper, Manganese, Zinc, Nickel, Cobalt, Aluminum, Cadmium, Lead and Total chromium at different times, 2 sampling points and 2 parts of plants (leaves and roots). The results show that the levels of nutrients, protein and toxic elements present in plant tissue of Eichhornia crassipes are influenced by spatial, temporal and physiological variability. In general, because the maximum values in the dry matter for total nitrogen (4.4088 g/100g), crude protein (27.5549 g/100g), total phosphorus (0.642 g/100 g), calcium (1.444 g/100g), magnesium (0.732 g/100 g), potassium (7.51 g/100 g), copper (4.4279 mg/100g), manganese (322.668 mg/100g), sodium (1.39 g/100g), iron (194.169 mg/100g) and zinc (3.5836 mg/100g), there was the possibility of using biomass of Eichhornia crassipes for various purposes such as in food animal, products production for human consumption, organic fertilizers, fabrication of brick low cost, and crafts. For all these applications requires a control of the levels of substances in plant tissue. Based on the levels of nutrients and crude protein, the younger plants (0 Month) would be best to have their biomass used. Moreover, one factor that contributes to the use of larger plants (6 Months), the levels of toxic elements which have significantly small or below the detection limit. Therefore, further studies quantifying the biomass produced/m2 at 0 and 6 months are needed for a more correct choice for the best time of harvest

Influencia do turismo sobre a atividade pesqueira do município de Tibal do Sul-RN

A área da pesquisa localiza-se no município de Tibau do Sul, situado na costa leste do Estado do Rio Grande do Norte, a 80 km ao Sul da capital Natal. O turismo, a pesca esportiva e instalação de empreendimentos vêm aumentando nessa área litorânea, disputando espaços com pescadores artesanais. A dissertação teve como objetivo identificar e analisar os conflitos socioeconômicos e ambientais entre a atividade pesqueira e a atividade turística no Município de Tibau do Sul, para subsidiar órgãos governamentais e entidades ligadas ao setor pesqueiro, com futuras políticas de incentivo e desenvolvimento sustentável local. O presente trabalho está dividido em introdução e dois capítulos. A introdução apresenta proposta e justificativa da pesquisa, com fundamentação teórica, em seguida são apresentados os procedimentos metodológicos. O primeiro capítulo apresenta a caracterização da pesca artesanal e o perfil socioeconômico dos pescadores de Tibau do Sul, identificando os conflitos entre a atividade pesqueira e o turismo. Para alcançar esse propósito, foram realizados levantamentos qualitativos e quantitativos, através da efetivação de 100 entrevistas com questionários semiestruturados, os quais foram aplicados a quatro comunidades pesqueiras. Os resultados constataram a real situação da pesca artesanal local e foram identificados vários conflitos, dentre eles: a falta de investimento no setor, baixo desenvolvimento tecnológico e de infraestrutura, além da ocupação desordenada em área de desembarque da produção. Todos esses fatores têm contribuído para o declínio da atividade pesqueira nesse município. O segundo capítulo apresenta uma análise territorial a partir da elaboração do mapa de ocupação do solo utilizando a metodologia de geoprocessamento. Constatou-se que a ocupação desordenada ocorreu principalmente depois da chegada dos turistas em Tibau do Sul e está concentrada principalmente na praia de Pipa, observou-se também que os empreendimentos construídos na área de estudo interferem no acesso público as praias e área de desembarque da produção dos pescadores. Espera-se que este estudo contribua para elaboração do plano de manejo nas comunidades pesqueiras e possa subsidiar os gestores na implementação de políticas públicas voltadas para o desenvolvimento sustentável local

Implicações socioeconômicas e ambientais da pesca artesanal de lagosta em Touros/RN

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

A mineração artesanal e de pequena escala em pegmatitos e cerâmica no município de Parelhas, região do Seridó/Rio Grande do Norte

The working conditions, occupational health, occupational illness and workers quality of life, usually referring to the artisanal activities and the workers with a poor professional support. Because this reality is still present in locals without good infrastructure of social and economic attention, there is a need for a broad knowledge of problems related to the productive processes that include features of unsanitary and unhealthy. Despite the intense process of industrialization promoted by globalization and the growth of developing nations like Brazil, the activities of artisanal and small-scale mining are still suffering from the marginalization of their production processes and their workers. This dissertation deals with the description of mineral-based activities (MBA), especially the activities related to production processes of extraction and processing of red pottery and minerals in pegmatites in Parelhas city, Seridó, Rio Grande do Norte, which are conducted by small mining companies or artisanal miners. The study of the work process was based on direct observation, photographic documentation, ergonomics, health and occupational safety analysis, interviews and structured questionnaire with workers of the two activities. The results indicate the need for improvement in both workplaces (red pottery and pegmatites), adaptation of workers to safety standards specific to the workplace, more attention and care related to ergonomics and occupational safety, greater importance to economic and social relations among performed activities, workers and firms of mineral branch and better and greater integration of social policies, supported by different sectors of society with the intention of transforming the current social, cultural, labor and education situation

Trajetória de vida dos pescadores vítimas de lesão medular por mergulho: experiências, representações sociais e estresse

Spinal cord injury causes permanent disabling manifestations, affecting the anatomic integrity, bodily changes and functional limitations related to the disability state. It was aimed to analyze the social representation, stress level and experiences of fishermen victims of spinal cord injury caused by diving accident in the Northern beaches of Brazil. It is a descriptive - exploratory study with quantitative, qualitative and representational data developed i n fishermen’s villages in nine beaches of Northern shore/RN, between October 2013 to August 2014, after the approval of the Ethics Committee in Research of the Universidade Federal do Rio Grande do Norte, under the number 431.891/2013, CAAE 20818913.0.0000 .5537. The sample was composed by 44 fishermen with spinal cord injury, defined from inclusion and exclusion criteria of the participants. It was used as instrument to collect the data a semi structured interview. Quantitative data was analyzed by descrip tive statistics, showing the data through table, boxes and graphics by Microsoft Excel. Data from interviews were submitted to the software called Analyse Lexicale par Contexte d’un Ensemble de Segments de Texte (ALCESTE) using the analysis of the Social R epresentation Theory and Center Core Theory. It is shown the outcomes of the research through four articles, following the normative recommendations of the journals. Participants of the study were all male, age mean 49,6 years, elementary school (68,2%), m arried (77,3%); paraplegia sequel (50,0%). Most of them showed stress (75,0%), almost in the exhaustion stage (33,3%), prevalent insomnia symptoms (95,5%) in the last hours; hypertension (97,7%) in the last week and sexual troubles (95,5%) in the last mont h). Decompressive illness caused spinal cord injury (57,1%), occurred prevalently in low summer (75,0%), northern shore (96,4%), having as main consequences the paresthesia and pain in the upper and lower limbs (67,9%), followed by death (25,0%). Interview analysis under the understanding of Social Representation of spinal cord injury allowed the appearance of seven categories: Treatment: limitation and expectative; Spinal Cord injury: before and after; Retirement: reality yet to come; Disability: dependenc y, incapacity, vulnerability; Overcoming and autonomy; Self feelings: physics losses and new start; Life and labor: impediments, plans and changes. The center core of the representation is found in the first category by the expectative and limitation on th e treatment, meanwhile the outskirt elements are in seventh and third categories. Physics limitation for fishing activities and retirement expectative is the most outstanding of the structure. Social representation concerning spinal cord injury is found in a transaction moment between before and after with the prevented fishing activity, coping of the situation with the potential remaining. The anchoring is established in the desire for changes related to the improvements of life and health conditions exper ienced day by day through faith. This study finishes pointing out the range of the objectives, which topic is relevant for public health of fishermen. It is suggested prevention measures, promotion and health recovery of fishermen, besides safe, healthy an d worthy conditions as a compromise of social and health politics.

Estrutura genética populacional de Lutjanus analis cioba e Lutjanus jocu dentão (Lutjanidae) ao longo do litoral brasileiro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior