Estudo da preferência manual durante o desenvolvimento ontogenético em sagüi comum ( Callithix jacchus)

The study of manual preference is a widely used approach to investigate cerebral laterality in nonhuman primates. However, in New World primates, little is known about the ontogenesis of hand use asymmetry, in both forced and spontaneous activities, as well as how they correlate with sexual hormones. Accordingly, a longitudinal study was conducted on the manual preference of 6 female and 4 male common marmosets (Callithrix jacchus). The study included the record of forced tests to reach for the food using only one hand (forced activity) and activities such as grooming (auto and social), scratching, grasping the food and hanging, in weekly sessions from the infantile (4 months) to the early adult phase (15 months). Feces samples were also collected, at least once a week, to evaluate the level of gonadal steroids and their influence on these behaviors. In the forced activity, the results confirm the influence of the development period on manual preference during feeding, shown by the increase in lateral stability when grasping the food between the juvenile and adult phases. During this period, a sexual hormone effect on development was also observed, mainly of progesterone in females and androgen in males, but no difference between sexes was found. In the females, progesterone also influenced the manual preference index, with a proportional increase in the degree of manual asymmetry during puberty. With respect to spontaneous activities, the animals showed proportional use of both hands when scratching, hanging, holding the food and grooming. A positive correlation was also found between the preference for holding the food in forced activities and in spontaneous activities

O efeito da dessincronização circadiana sobre o metabolismo

The lost of phase relationship between rhythms and behaviour can, and often do, undesirable consequences. The purpose os study was to ascertain the effect of circadian desynchronization in T22 about metabolism of wistar rats. The subjects consisted of 24 animals separated in two groups: control (n=12) T24 with 8 weeks of aged and experimental group (n=12) T22, also with 8 weeks of aged. Both the groups were subject to register of locomotor actitivity, body temperature, body weight and food intake in all the experiment. And more, both the groups were subject to food deprivation, running in treadmill and forced swimming. The results show rhythm of locomotor activity and body temperature desynchronized. Dont exist diference in body weight between both the groups (T24 = 386,75±40,78g e T22 380,83±44,28g) . However, the food intake was different between the phases, light and dark, in intergroup and intragroup. The body temperature was not different in food deprivation. The same ocurred for running in treadmill and forced swimming. Since similar alterations occur in shift workers, it is proposed that the experimental paradigm presented in this manuscript is a useful model of shift work. That is, alterations in activity/rest cycles and consummatory behavior can affect the health of organism

Influência da auto seleção à luz no ritmo circadiano de atividade motora em Callithrix Jacchus

Marmosets, Callithrix jacchus, are strictly diurnal animals. The motor activity rhythmicity is generated by the circadian timing system and is modulated by environmental factors, mainly by photic stimuli that compose the light-dark cycle. Photic stimuli can reset the biological oscilators changing activity motor pattern, by a mechanism called entrainment. Otherwise, light can act directly on expressed rhythm, without act on the biological oscillators, promoting the masking. Thus, photic stimuli can synchronize the circadian activity rhythm (CAR) by two distinct mechanisms, acting isolated or at a combined way. Among the elements that can influence photic synchronization, the duration and time of photic exposure is pointed out. If in the natural environment the marmoset can choose places of different intensity illumination and is synchronized to light-dark cycle (LD), how the photic synchronization mechanism can be evaluated in laboratory by light self-selection? With objective to response this question, four adult male marmosets were studied at two conditions: with and without sleeping box. The animals were submitted to a LD cycle (12:12/ 350:2 lx) and constant light (LL: 350 lx) conditions in individual cages with an opaque sleeping box, that permitted the light self-selection. At the room, the temperature was 25.6 ºC (± 0.3 ºC) and humidity was 78.7 (± 5%). The motor activity was recorded at 5 min bins by infrared movement sensors installed at the top of the cages. The motor activity profile was distinct at the two conditions: without the sleeping box protection against light, the activity frequency was higher at CT 11-12 (ANOVA; F(3.23) = 62.27; p < 0.01). Also, the duration of the active phase (α) was prolonged of about 1 h (t test, p < 0.05) and the animals showed a significant delay on the activity onset and offset (t test, p < 0.05) and at the acrophase (confidence intervals of 5%) of CAR. In LL, the light continuous exposure prolonged the active phase and influenced the endogenous expression of the circadian activity rhythm period. From the result analysis, it is concluded that the light self-selection can modify several parameters of CAR in marmosets, allowing the study of the synchronization mechanism using the burrow model. Thus, without sleeping box there was a phase delay between the CAR and LD (entrainment) and an increase of activity near lights off (positive masking). Furthermore, in LL, the light continuous exposure modifies α and the endogenous expression of CAR. It is suggested that the light self-selection might be take into account at investigations that evaluate the biological rhythmicity in marmosets

Bolton freeware: aplicativo de avaliação de discrepância de massa dentária desenvolvido pelo programa de pós-graduação em odontologia/UFRN

The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software

Influência da laserterapia na proliferação de células-tronco do ligamento periodontal humano

Low level laser irradiation (LLLI) has been used in Dentistry to promote wound healing and tissue regeneration. The literature shows a positive effect of LLLI on cell proliferation, but little is known about their effectiveness in promoting stem cells proliferation. The aim of this study was to evaluate the effect of LLLI on the proliferative rate of human periodontal ligament stem cells. Extracts of periodontal ligament were isolated from two third molars removed by surgical and/or orthodontic indication. After enzymatic digestion, the cells were grown in α-MEM culture medium supplemented with antibiotics and 15% fetal bovine serum. On the third subculture, the cells were irradiated with a InGaAlP-diode laser, using two different energy densities (0,5J/cm 2 - 16 seconds and 1,0J/cm² - 33 seconds), with wavelength of 660nm and output power of 30mW. A new irradiation, using the same parameters, was performed 48h after the first. A control group (non irradiated) was kept under the same experimental culture conditions. The Trypan blue exclusion test and the mitochondrial activity of the cells measured by MTT [3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] essay were performed to assess the cell proliferation in the intervals of 0, 24, 48 e 72 h after irradiation. The data of cell counts were submitted to nonparametrical statistical tests (Kruskal-Wallis and Mann-Whitney), considering a confidence interval of 95%. DAPI (4 -6-Diamidino-2-phenylindole) staining of the cells was performed at 72h interval to evaluate possible nuclear morphological changes induced by LLLI. The results of this study show that the energy density of 1,0 J/cm² promoted greater cell proliferation compared to the other groups (control and 0,5 J/cm²) at intervals of 48 and 72h. The mitochondrial activity measured by MTT essay showed similar results to the Trypan blue cell counting test. The group irradiated with 1,0J/cm² exhibited a significantly higher MTT activity in the intervals of 48 and 72h, when compared to the group irradiated with 0,5J/cm². No nuclear morphological change was observed in the cells from the three groups studied. It is concluded that LLLI has stimulatory effects on the proliferation of human periodontal ligament stem cells. Therefore, the use of laser irradiation in this cell type may be important to promote future advances in periodontal regeneration

Renderizações não fotorealísticas para estilização de imagens e vídeos usando areia colorida

Non-Photorealisitc Rendering (NPR) is a class of techniques that aims to reproduce artistic techniques, trying to express feelings and moods on the rendered scenes, giving an aspect of that they had been made "by hand". Another way of defining NPR is that it is the processing of scenes, images or videos into artwork, generating scenes, images or videos that can have the visual appeal of pieces of art, expressing the visual and emotional characteristics of artistic styles. This dissertation presents a new method of NPR for stylization of images and videos, based on a typical artistic expression of the Northeast region of Brazil, that uses colored sand to compose landscape images on the inner surface of glass bottles. This method is comprised by one technique for generating 2D procedural textures of sand, and two techniques that mimic effects created by the artists using their tools. It also presents a method for generating 21 2D animations in sandbox from the stylized video. The temporal coherence within these stylized videos can be enforced on individual objects with the aid of a video segmentation algorithm. The present techniques in this work were used on stylization of synthetic and real videos, something close to impossible to be produced by artist in real life

Análise da distribuição do volume pulmonar total e compartimental de crianças com peso normal e obesidade em diferentes posturas

Introdução: A obesidade infantil apresenta incidência crescente e as possíveis comorbidades, como alteração da função respiratória, estão cada vez mais presente nessa faixa etária. O tecido adiposo impõe carga ao sistema respiratório o que leva a um padrão restritivo. Essa condição sofre alterações com as mudanças posturais, onde a gravidade influencia o padrão respiratório de acordo com o posicionamento adotado. Objetivo: Avaliar a distribuição dos volumes total e regional e o movimento tóracoabdominal de crianças e adolescentes que estão acima do peso nas posturas supino e sentado. Métodos: Cinqüenta e duas crianças/adolescentes (8-12 anos) divididas em três grupos: Grupo Obeso (GO=22); Grupo Sobrepeso (GSP=9); Grupo Controle (GC=21) foram avaliadas quanto às medidas antropométricas, teste de função pulmonar, exame das pressões respiratórias máxima e a pletismografia optoeletrônica em duas posturas, supino e sentado, durante a respiração tranquila. Resultados: As crianças que estão obesas apresentaram maiores valores em relação ao GSP e GC das seguintes variáveis espirométricas: volume expiratório forçado no primeiro segundo (VEF1) (p<0.05) e capacidade vital forçada (CVF) (p<0.01). No exame de manovacuometria o GO apresentou um aumento na pressão inspiratória máxima (PImáx) (p<0.01) em comparação com os outros grupos. Quanto à distribuição do volume corrente, o GO possui uma maior contribuição do compartimento abdominal (AB) na postura supina (p<0.05) em relação ao GC e GSP, enquanto que na postura sentada os grupos não diferiram em relação à distribuição dos volumes. O GO apresentou maior assincronia na postura supina (p<0.05) e maior velocidade de encurtamento (p<0.05) em relação os outros grupos. Conclusão: A obesidade em crianças/adolescentes não provoca prejuízos na função pulmonar, incrementa a força muscular inspiratória, aumenta a participação do compartimento AB e a assincronia no MTA na postura em supino, conclui-se que a postura supina associada à obesidade provoca aumento da sobrecarga do diafragma, desfavorecendo o desempenho do sistema respiratório.

Avaliação da pressão inspiratória nasal sniff na população obesa

Introdução: a avaliação da pressão inspiratória nasal (SNIP) é considerada uma manobra complementar da Pressão Inspiratória Máxima estática (PImax) em várias condições clínicas, porém não há relatos na obesidade. Por outro lado, a obesidade tem um importante impacto nos músculos respiratórios especialmente com maiores gordura abdominal o que provavelmente pode ser detectado na avaliação da SNIP que mensura mais precisamente a pressão diafragmática. Objetivo: analisar em obesos a relação entre SNIP e variáveis respiratórias e marcadores de adiposidade. Material e Método: num estudo transversal um total de 92 obesos (38.3±10.2 anos) sem história de doença respiratória ou cardíaca diagnosticada. Foram avaliados na espirometria (capacidade vital forçada-CVF; volume expiratório forçado no primeiro segundo-VEF1; volume de reserva expiratório-VRE) e pressões respiratórias estática (PImax, PEmax e SNIP) e dinâmica (ventilação voluntária máxima-VVM). Sendo considerados os marcadores de adiposidade: índice de adiposidade corporal-IAC; índice de massa corporal-IMC e circunferências do quadril (CQ), cintura (CC) e pescoço (CP). Resultados: 65 obesos mórbidos (IMC=50.8±8.1Kg/m2) e 27 obesos não mórbidos (IMC=35.6±2.7Kg/m2) foram homogêneos (p>0.05) na SNIP (99.1±24.5cmH2O, 87% do predito) e PImax (107.3±26.4cmH2O, 109% do predito). Existe correlação (r=0.5) entre SNIP e PImax somente no grupo de obesos mórbidos. De acordo com as correlações houve associação entre variáveis respiratórias (CVF r=0.48; VEF1 r=0.54; e VVM r=0.54), valores antropométricos (idade r=-0.44) e SNIP somente para os obesos mórbidos. Esses achados foram certificados quando também comparados a quantidade de gordura ao redor do pescoço (CP≥43cm). O modelo de regressão linear stepwise mostrou que a VVM parece ser o melhor preditor para explicar a SNIP nos obesos mórbidos. Nestes obesos a SNIP foi levemente mais baixa (87%predito) que os valores esperados para indivíduos brasileiros saudáveis. Conclusão: em obesos mórbidos a SNIP é moderadamente relacionada a PImax. A SNIP parece ser mais relacionada a VVM que à marcadores de adiposidade.

Efeito dos andrógenos na estabilização da preferência manual em machos adultos de sagui comum (Callithrix jacchus)

The role of steroids hormones on the behavior of vertebrates have been described as organizational and activational effects. These actions occur in different periods of the ontogenetic development as fetal, early post natal and during puberty (organizational effect) or modifying the expression of behavioral patterns during time life (activational effects). Studies on brain lateralization in hand use in human and non-human primates have shown that sexual hormones seems to participate in the process of handedness strength that begins in the puberal period and is stabilized at the adult age. The aim of this study was to investigate in adult male Callithrix jacchus if the strength of use of the hand in common marmoset adult male is stable (organizational effect) or androgens variations could affect its stability (activational effect). The preferential use of one hand in 14 common marmoset (Callithrix jacchus was studied in two contexts: (1) spontaneous holding food and directing the food to mouth (feeding episodes), and (2) forced reaching food tests where the animal have to reach the food through a hole within a cover plate with a central hole that allow the use of one hand only to reach the food. The records were made during 5 sessions/20 bouts each during baseline totalizing 100 episodes before two treatments. Firstly it was used GnRH antagonist: a single subcutaneous injection of 100µg de Cetrotide – acetate of cetrorrelix (Baxter Oncology GmbH, Germany) (n=10). Secondly, a single GnRH injection of 0.2mg of GnRH (Sigma – Aldrich) (n= 8) was used. After injections 20 successful attempts of hand use episodes was recorded in the 1st , 2 nd, 7th, 15th and 30 th days, totalizing in the whole period 100 episodes for each context, after both treatments. Fecal sampling to measure extracted fecal androgens was performed in all days of data collection across the length of the basal and during the experimental periods. Statistical analysis by mixed model, Tukey test to compare mean values after the two treatments, and Levene test to compare mean variance were used, all for p-value < 0.05. In basal phase 6 animals used preferentially the right hand, 5 the left and 3 were ambidextrous. Mean handedness index in basal phase were different from that after both treatment starting at 7th day. Mean variance of handedness index for spontaneous and forced activities does not differs before and after both treatments but the mean values for GnRH index were higher than that observed for its antagonist. These findings suggested that androgens have an activational effect on handedness in adult male C. jacchus

Estudo das forças capilar, viscosa e gravitacional através de grupos adimensionais na simulação da drenagem gravitacional assistida por gás (GAGD)

The distribution and mobilization of fluid in a porous medium depend on the capillary, gravity, and viscous forces. In oil field, the processes of enhanced oil recovery involve change and importance of these forces to increase the oil recovery factor. In the case of gas assisted gravity drainage (GAGD) process is important to understand the physical mechanisms to mobilize oil through the interaction of these forces. For this reason, several authors have developed physical models in laboratory and core floods of GAGD to study the performance of these forces through dimensionless groups. These models showed conclusive results. However, numerical simulation models have not been used for this type of study. Therefore, the objective of this work is to study the performance of capillary, viscous and gravity forces on GAGD process and its influence on the oil recovery factor through a 2D numerical simulation model. To analyze the interplay of these forces, dimensionless groups reported in the literature have been used such as Capillary Number (Nc), Bond number (Nb) and Gravity Number (Ng). This was done to determine the effectiveness of each force related to the other one. A comparison of the results obtained from the numerical simulation was also carried out with the results reported in the literature. The results showed that before breakthrough time, the lower is the injection flow rate, oil recovery is increased by capillary force, and after breakthrough time, the higher is the injection flow rate, oil recovery is increased by gravity force. A good relationship was found between the results obtained in this research with those published in the literature. The simulation results indicated that before the gas breakthrough, higher oil recoveries were obtained at lower Nc and Nb and, after the gas breakthrough, higher oil recoveries were obtained at lower Ng. The numerical models are consistent with the reported results in the literature

Análise da eficácia de um refrigerador doméstico com condensador modificado: revestimento com meio poroso dissipativo

The development of home refrigerators generally are compact and economic reasons for using simplified configuration. The thermodynamic coefficient of performance ( COP ) is limited mainly in the condenser design for reasons of size and arrangement ( layout ) of the project ( design ) and climatic characteristics of the region where it will operate. It is noteworthy that this latter limitation is very significant when it comes to a country of continental size like Brazil with diverse climatic conditions. The COP of the cycle depends crucially on the ability of heat dissipated in the condenser. So in hot climates like the northeast, north, and west-central dispel ability is highly attenuated compared to the south and southeast regions with tropical or subtropical climates when compared with other regions. The dissipation in compact capacitors for applications in domestic refrigeration has been the focus of several studies, that due to its impact on reducing costs and power consumption, and better use of the space occupied by the components of refrigeration systems. This space should be kept to a minimum to allow an increase in the useful storage volume of refrigerator without changing the external dimensions of the product. Due to its low cost manufacturing, wire on tube condensers continue to be the most advantageous option for domestic refrigeration. Traditionally, these heat exchangers are designed to operate under natural convection. Not always, the benefits of greater compactness of capacitors for forced outweigh the burden of pumping air through the external heat exchanger. In this work we propose an improvement in convective condenser changing it to a transfer mechanism combined in series with conductive pipes and wire to a moist convective porous medium and the porous medium to the environment. The porous media used in the coating was composed of a gypsum plaster impregnated fiber about a mesh of natural cellulosic molded tubular wire mesh about the original structure of the condenser , and then dried and calcined to greater adherence and increased porosity. The proposed configuration was installed in domestic refrigeration system ( trough ) and tested under the same conditions of the original configuration . Was also evaluated in the dry condition and humidified drip water under natural and forced with an electro - fan ( fan coil ) convection. Assays were performed for the same 134- refrigerant charge e under the same thermal cooling load. The performance was evaluated in various configurations, showing an improvement of about 72 % compared with the original configuration proposed in humidification and natural convection.

Simulação da destilação molecular de filme descendente para o petróleo

The heavy part of the oil can be used for numerous purposes, e.g. to obtain lubricating oils. In this context, many researchers have been studying alternatives such separation of crude oil components, among which may be mentioned molecular distillation. Molecular distillation is a forced evaporation technique different from other conventional processes in the literature. This process can be classified as a special distillation case under high vacuum with pressures that reach extremely low ranges of the order of 0.1 Pascal. The evaporation and condensation surfaces must have a distance from each other of the magnitude order of mean free path of the evaporated molecules, that is, molecules evaporated easily reach the condenser, because they find a route without obstacles, what is desirable. Thus, the main contribution of this work is the simulation of the falling-film molecular distillation for crude oil mixtures. The crude oil was characterized using UniSim® Design and R430 Aspen HYSYS® V8.5. The results of this characterization were performed in spreadsheets of Microsoft® Excel®, calculations of the physicochemical properties of the waste of an oil sample, i.e., thermodynamic and transport. Based on this estimated properties and boundary conditions suggested by the literature, equations of temperature and concentration profiles were resolved through the implicit finite difference method using the programming language Visual Basic® (VBA) for Excel®. The result of the temperature profile showed consistent with the reproduced by literature, having in their initial values a slight distortion as a result of the nature of the studied oil is lighter than the literature, since the results of the concentration profiles were effective allowing realize that the concentration of the more volatile decreases and of the less volatile increases due to the length of the evaporator. According to the transport phenomena present in the process, the velocity profile tends to increase to a peak and then decreases, and the film thickness decreases, both as a function of the evaporator length. It is concluded that the simulation code in Visual Basic® language (VBA) is a final product of the work that allows application to molecular distillation of petroleum and other similar mixtures.

Prevalência e fatores associados à diminuição da função pulmonar em obesos em pré-operatório de cirurgia bariátrica

Introduction: Obesity shows changes in pulmonary function and respiratory mechanics, however, little is known regarding the prevalence of worsening respiratory function when considering the increase in central or peripheral adiposity or general obesity. Objectives: To analyze the association between anthropometric adiposity and decreased lung function in obese. Materials and Methods: Patients eligible for this study obese individuals (IMC≥30kg/m2) in pre-bariatric surgery and referred for Treatment Clinic of Obesity and Related Diseases, located at the University Hospital Onofre Lopes (HUOL), from October 2005 and July 2014. The evaluation included clinical information and measurement of anthropometric measures (body mass index (BMI), body fat index (BFI) and waist circumference (WC) and neck (NC)) and spirometric. The prevalence and analysis by Poisson regression was performed considering the following outcome variables: forced vital capacity (FVC), forced expiratory volume in one second (FEV1) and Maximum Voluntary Ventilation (MVV) and as predictor variables were considered: BMI, IAC, WC and NC and as control variables: age, gender, smoking history and comorbidities (diabetes mellitus, dyslipidemia and hypertension). Statistical analysis was performed using Statistical Package for Social Sciences software (SPSS - version 20.0). Results: We analyzed 384 individuals, 75% women, mean BMI: 46.6 (± 8.7) kg/m2, IAC: 49.26 (± 9.48)%, WC: 130.84 (± 16.23) cm and NC: 42.3 (± 4.6) cm. The higher prevalence of FVC and FEV1 <80% was observed in individuals with NC above 42 cm, followed those with a BMI above 45 kg/m2. Multivariate analysis using Poisson regression showed as risk factors associated with FVC <80%, the variables: NC above 42 cm (odds ratio (OR) 2.41) and BMI over 45Kg/m2 (OR 1.71 ). As for FEV1 <80% predicted, all predictor variables were associated, with the largest odds presented by the NC (3.40). MVVV was not associated with any studied varaible. Conclusion: Individuals with NC above 42 cm had higher prevalence of reduced lung function and the NC was the measure with the highest association with reduced lung function in obese.

Epítese gengival removível: alternativa estética e de rápida resolução para repor tecidos periodontais anteriores

The gingiva, part of the masticatory mucosa tissue that covers the alveolar process and surrounds the cervical portion of teeth, has a definitive shape and texture associated with the eruption of teeth. Therefore, it must be included in rehabilitative planning, as the absence of papillae induces problems with esthetics, phonetics and food-impaction. The purpose of the present study was to approach the indications, limitations and techniques for making a removable artificial gingiva made of acrylic resin, by reporting on a clinical case. The patient, a 29-year-old woman, with the sequelae of periodontal disease, presented loss of interdental papilla causing “black holes”. She was dissatisfied with the esthetic appearance of her teeth, and also complained of long teeth and air escaping when she spoke. As treatment, prosthetic reconstruction was proposed, by means of a removable artificial gingiva (gingival epithesis) to simulate the presence of interdental papillae, providing better esthetics and phonetics. Gingival epithesis is an easily made, inserted and hygienically cleaned appliance that provides a simple and safe alternative solution for cases in which surgical techniques are limited.

Epítese gengival removível: alternativa estética e de rápida resolução para repor tecidos periodontais anteriores

The gingiva, part of the masticatory mucosa tissue that covers the alveolar process and surrounds the cervical portion of teeth, has a definitive shape and texture associated with the eruption of teeth. Therefore, it must be included in rehabilitative planning, as the absence of papillae induces problems with esthetics, phonetics and food-impaction. The purpose of the present study was to approach the indications, limitations and techniques for making a removable artificial gingiva made of acrylic resin, by reporting on a clinical case. The patient, a 29-year-old woman, with the sequelae of periodontal disease, presented loss of interdental papilla causing “black holes”. She was dissatisfied with the esthetic appearance of her teeth, and also complained of long teeth and air escaping when she spoke. As treatment, prosthetic reconstruction was proposed, by means of a removable artificial gingiva (gingival epithesis) to simulate the presence of interdental papillae, providing better esthetics and phonetics. Gingival epithesis is an easily made, inserted and hygienically cleaned appliance that provides a simple and safe alternative solution for cases in which surgical techniques are limited.