Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz

The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Ecologia parasitária de isópodos e biologia reprodutiva em tibiro, Oligoplites spp (OSTEICHTHYES: CARANGIDAE) das águas costeiras de Natal, Rio Grande do norte

Oligoplites palometa (Cuvier) and Oligoplites saurus (Bloch & Schneider) (Osteichthyes: Carangidae) are coastal pelagic fish species. The objective of this study was to investigate the effect of parasitism by isopods and the reproductive biology of the leather jack, Oligoplites spp. A total of 113 individuals of Oligoplites spp (35 of O. saurus and 78 of O. palometa) were captured during the period between January, 2005 and July, 2007 from the coastal waters of Natal, RN. The morphometric and meristic characters were registered; macroscopic analyses were done to collect the isopod parasites and the gonads were observed to verify the reproductive aspects. The crustacean isopod parasite, Cymothoa spinipalpa (Isopoda: Cymothidae) was encountered on the tongue in the oral cavity in both fish hosts. The parasitic indices of C. spinipalpa showed high values of prevalance of 51,4% for O. saurus and 64,1% for O. palometa. The host presented significant correlations between body mass and body length of O. palometa and the number of parasites. Body lengths of female C. spinipalpa were small due to the limited space available in the oral cavity of the host. There was a significant difference in the sex ratio of O. palometa, males outnumbered the females. The isopod parasites showed specificity to the oral cavity of hosts. Macroscopic analyses of gonads showed four stages of gonadal development for both sex of O. palometa: immature, maturing, mature and spent

Avaliação do desenvolvimento neuropsicomotor em crianças na rede básica de saúde utilizando o teste de Denver II: identificação de fatores de risco materno

Alterations in the neuropsychomotor development of children are not rare and can manifest themselves with varying intensity at different stages of their development. In this context, maternal risk factors may contribute to the appearance of these alterations. A number of studies have reported that neuropsychomotor development diagnosis is not an easy task, especially in the basic public health network. Diagnosis requires effective, low-cost, and easy - to-apply procedures. The Denver Developmental Screening Test, first published in 1967, is currently used in several countries. It has been revised and renamed as the Denver II Test and meets the aforementioned criteria. Accordingly, the aim of this study was to apply the Denver II Test in order to verify the prevalence of suspected neuropsychomotor development delay in children between the ages of 0 and 12 months and correlate it with the following maternal risk factors: family income, schooling, age at pregnancy, drug use during pregnancy, gestational age, gestational problems, type of delivery and the desire to have children. For data collection, performed during the first 6 months of 2004, a clinical assessment was made of 398 children selected by pediatricians and the nursing team of each public health unit. Later, the parents or guardians were asked to complete a structured questionnaire to determine possible risk indicators of neuropsychomotor development delay. Finally the Denver II Developmental Screening Test (DDST) was applied. The data were analyzed together, using Statistical Package for Social Science (SPSS) software, version 6.1. The confidence interval was set at 95%. The Denver II Test yielded normal and questionable results. This suggests compromised neuropsychomotor development in the children examined and deserves further investigation. The correlation of the results with preestablished maternal risk variables (family income, mother s schooling, age at pregnancy, drug use during the pregnancy and gestational age) was strongly significant. The other maternal risk variables (gestational problems, type of delivery and desire to have children) were not significant. Using an adjusted logistic regression model, we obtained the estimate of the greater likelihood of a child having suspected neuropsychomotor development delay: a mother with _75 4 years of schooling, chronological age less than 20 years and a drug user during pregnancy. This study produced two manuscripts, one published in Acta Cirúrgica Brasileira , in which an analysis was performed of children with suspected neuropsychomotor development delay in the city of Natal, Brazil. The other paper (to be published) analyzed the magnitude of the independent variable maternal schooling associated to neuropsychomotor development delay, every 3 months during the first twelve months of life of the children selected.. The results of the present study reinforce the multifactorial characteristic of development and the cumulative effect of maternal risk factors, and show the need for a regional policy that promotes low-cost programs for the community, involving children at risk of neuropsychomotor development delay. Moreover, they suggest the need for better qualified health professionals in terms of monitoring child development. This was an inter- and multidisciplinary study with the integrated participation of doctors, nurses, nursing assistants and professionals from other areas, such as statisticians and information technology professionals, who met all the requirements of the Postgraduate Program in Health Sciences of the Federal University of Rio Grande do Norte

Efeito pró-inflamatório de uma lectina purificada da esponja marinha Cliona varians

A galactose and sucrose specific lectin from the marine sponge Cliona varians named CvL was purified by acetone fractionation followed by Sepharose CL 4B affinity chromatography. Models of leukocyte migration in vivo were used to study the inflammatory activity of CvL through of mouse paw oedema and peritonitis. Effect of CvL on peritoneal macrophage activation was analyzed. Effects of corticoids and NSAIDS drugs were also evaluated on peritonitis stimulated by CvL. Results showed that mouse hind-paw oedema induced by sub plantar injections of CvL was dependent dose until 50µg/paw. This CvL dose when administered into mouse peritoneal cavities induced maxima cell migration (9283 cells/µL) at 24 hours after injection. This effect was preferentially inhibited by incubation of CvL with the carbohydrates D-galactose followed by sucrose. Pre-treatment of mice with 3% thioglycolate increases the peritoneal macrophage population 2.3 times, and enhanced the neutrophil migration after 24h CvL injection (75.8%, p<0.001) and no significant effect was observed in presence of fMLP. Finally, Pre-treatment of mice with dexamethason (cytokine antagonist) decreased 65.6%, (p<0.001), with diclofenac (non-selective NSAID) decreased 34.5%, (p<0.001) and Celecoxib (selective NSAID) had no effect on leukocyte migration after submission at peritonitis stimulated by CvL, respectively. Summarizing, data suggest that CvL shows pro-inflammatory activity, inducing neutrophil migration probably by pathway on resident macrophage activation and on chemotaxis mediated by cytokines

Determinação da idade dental de crianças brasileiras nordestinas: novos valores de conversão de maturidade dental para população específica

Since Demirjian's system of estimating dental maturity was first described, many researchers from different countries have tested its accuracy among diverse populations. Some of these studies have pointed out a need to determine population-specific standards. In Brazil, the Northeast region is the one that most suffers the negative impact of exodus, specially related to the increase of abandoned children in the cities. The aim of this study was to test the accuracy of Demirjian's system for assessing the dental maturity of northeastern Brazilian children, so as to present a scale for maturity score conversion into dental age developed specifically for this population. This could be used for forensic, anthropological and legal matters, and also as a model for other countries attempting to formulate their own conversion scales. Panoramic radiographs of 1,491 children (821 females and 670 males), aged 7 to 13 years, from Ceará state, northeast Brazil, were assessed by a single observer to determine dental age (DA) according to Demirjian's system. The mean percentage of intra-observer agreement was 86.6%, with a mean Cohen's Kappa coefficient of 0.67 (substantial agreement). The DA was compared by paired t-test to subjects' chronological age (CA). The differences between CA and DA in all age groups were statistically significant (p<0.0001), demonstrating a great advancement in DA among Brazilians. Scatter plots were drawn for both genders, and the data were fitted to a growth curve, y = 100/ (1 + e-a(x b)). Graphs corresponding to the 50th percentile curves were produced. A table with new values for the conversion of maturity score into dental age for northeastern Brazilian children is presented. The great advancement in DA, as obtained by Demirjian's system in this population, justified the determination of specific scores for dental maturity assessment

Avaliação das condições higiênico-sanitárias da produção de refeições à base de carne da alimentação escolar no município de Natal-RN

The National School Nutrition Program is the oldest program in the country directed at food and nutrition safety. Its aims are to offer nutritional food as a supplement to students of public and philanthropic schools. Studying school nutrition transcends the investigation as a purely social program, given that it reaches the fields of public health, nutrition and food, using a wide variety of approaches. Thus, it is characterized by a multidisciplinary study, where the disciplines work side by side in distinct aspects of a single problem. Aim: This study aims to assess hygiene practices during the preparation of meat-based meals in public schools in the city of Natal, Brazil. Methods: A list was applied at 27 schools to identify the procedures of good food preparation practices. In addition, cooking and meal distribution temperature were measured and a microbiological analysis of the final preparation and of the water used in preparing it was performed. For microbiological analyses of the food, we analyzed coliforms at 45°C, coliforms at 35°C and Enterococcus, and for the water, we analyzed thermotolerant coliforms and total coliforms, using the methods recommended by APHA, 1995. Results: Most of the schools did not meet the required standards in all the variables related to good food preparation practices, except for the time spent preparing the meat, in which 89% were within the norm. Cooking temperature of the meals was within the standard; however, the temperature at distribution and the time spent dispensing the meals were inadequate. Of the 27 schools, 22 (81.5%) showed the presence of coliforms at 35° C in at least one meal sample and 18 (66.7%) had values above the recommended limit for coliforms at 45°C. The presence of E. coli was identified in 6.1% of the samples analyzed. The presence of Enterococcus was not found at any of the schools. With respect to the water, the North district of the city was the only one that did not meet the standards for the two indicators evaluated. The contamination found was not associated with the hygiene or food storage problems observed. Conclusions: The results show that the hygiene-sanitary conditions of meat-based public school meals were unsatisfactory, demonstrating the need for improvements in the production process to preserve the health of the student population. Multidisciplinarity: Researchers from the areas of food microbiology, nutrition, public health and statistics took part in this study, a decisive factor for characterizing the research as multidisciplinary

Avaliação clínica e microbiológica das condições de saúde oral dos receptores de transplante renal do Hospital Universitário Onofre Lopes, Natal RN

Introduction: The chronic immunosuppression promotes the development of changes in the oral cavity of the kidney transplant recipients (KTR), however with the exception of gingival overgrowth, little is known regarding the prevalence of oral lesions in this population. Objective: To evaluate the prevalence of clinical and microbiological conditions of the oral cavity of the recipients of kidney transplantation and the associated factors. Methods: This was a cross-sectional study which examined 96 clinical KTR and experimental where collected saliva stimulated them to identify Candida sp. Data collection consisted of evaluation stomatologic, socio-demographic, clinical aspects of transplantation, condition of oral hygiene and dental caries, yonder to questions about knowledge of oral alteration after transplantation. Results: Of the total, 66.7% of KTR had some type of oral manifestation. The most common was saburral tongue, followed by gingival overgrowth, with both oral manifestations related to gender and concomitant use of cyclosporine and nifedipine (p <0.05). Tacrolimus showed a protective effect for gingival overgrowth (OR = 0.13). The oral hygiene was associated with saburral tongue(p = 0.03) and severity of gingival overgrowth (p = 0.0001). Oral candidiasis was diagnosed in 17.7% of patients and Candida albicans was isolated most frequently in the saliva of RTR with a colonization of 58.3%. The average DMF-T increased with age. The method of oral hygiene was most used brush and toothpaste to 61.5%. Changes in the oral cavity was seen in 54.2% of KTR, citing as the main growth and gingival ulcers. Instructions for oral hygiene after transplantation were neglected for 61.5% of RTR. Dry mouth and halitosis were reported in 30.2% and 36.5% respectively. Conclusions: More the half of the KTR had at least one injury of the mouth, the immunosuppressive drugs and oral hygiene are associated with these alterations. Prospective cohort studies are needed to elucidate the relationship between oral manifestations and levels of drug and risk of oral manifestations occur over time. The kidney transplant recipients showed to be aware of oral alterations occurred after transplantation and uninformed about the oral hygiene instructions. With regard to hygiene, the incidence of caries was considered high, conditions of risk were identified and improvements in primary attention should be encouraged and reflected in the monitoring of renal transplant

Efeitos de um extrato aquoso de porangaba (Cordia salicifolia) na marcação de constituintes sanguíneos com tecnécio-99m e na morfologia de hemácias

Effects of a Cordia salicifolia (porangaba) extract on the labeling of blood cells (BCs) with technetium-99m ((99m)Tc) and on the morphology of red BCs were evaluated. Labeling of cellular and molecular structures with (99m)Tc depends on a reducing agent. Some physical characteristics, as visible absorbance spectrum, electric conductivity, and refractive index of this porangaba extract, were also determined. Blood samples from Wistar rats were incubated with porangaba extract or with 0.9% NaCl (control). Labeling of blood constituents with (99m)Tc was performed. Plasma (P) and BCs, both soluble (SF-P and SF-BC) and insoluble (IF-P and IF-BC) fractions, were separated. The radioactivity in each fraction was counted, and the percentage of radioactivity incorporated (%ATI) was calculated. Blood smears were prepared, fixed, and stained, and the morphology of the red BCs was evaluated. Data showed an absorbance peak at 480 nm and electric conductibility and refractive index concentration-dependent. Porangaba extract decreased significantly (P < .05) the BC, IF-P, and IF-BC %ATI, and no modifications were verified on the shape of red BCs. Analysis of the results reveals that some physical parameters could be useful to aid in characterizing the extract studied. Moreover, it is possible that chemical compounds of this extract could have chelating/redox actions or be capable of binding to plasma and/or cellular proteins

Um modelo analítico da qualidade da dieta de adolescentes estudantes da rede publica de ensino de Natal, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Avaliação das atividades antinociceptiva e anti-inflamatória de uma heterofucana da alga Dictyota menstrualis

Fucana é um termo que define uma família de hetero e homopolissacarídeos que contem L-fucose em sua estrutura. Neste trabalho uma hererofucan F 2,0v da alga Dictyota menstrualis foi avaliada como agente antinociceptivo e antiinflamatório. A fucana F 2,0v inibiu a migração de leucócitos em até 100% (20.0 mg/kg) para a cavidade peritoneal após estimulo químico, porém, não alterou a expressão das interleucinas IL-1β, IL-6 e de TNF-α. Com relação a sensação dolorosa a F 2,0v (20.0 mg/kg) possui atividade antinociceptiva periférica com potência semelhante à dipirona. Por outro lado não apresentou efeito no teste da placa quente. Análises de microscopia confocal e citometria de fluxo mostram que a F 2,0v se liga a superfície dos leucócitos. O conjunto de resultados apresentados pela fucana F 2,0v sugerem que o mecanismo de ação está relacionado com sua capacidade de inibir a migração de leucócitos para o local da injúria tecidual. Em resumo os dados mostram que F 2,0v apresenta grande potencial como composto antinociceptivo e antiinflamatório. Estudos futuros serão realizados para caracterizar melhor o mecanismo de ação da F 2,0v

Efeito de extratos da alga marinha caulerpa mexicana em modelos de inflamação em murinos

The regulation of the inflammatory response is essential to maintain homeostasis. Several studies have been performed to search new drugs that can contribute to avoiding or minimizing an excessive inflammatory process. The aim of this study was to evaluate the effect of extracts of green algae Caulerpa mexican in models of inflammation. In mice, the model of peritonitis induced inflammatory zymosan pretreatment of mice with aqueous and methanol extracts of C. mexican was able to reduce cell migration to the peritoneal cavity. Treatment of mice with extracts of C. mexican also reduced the ear edema induced by xylene and exerted inhibitory action on the migration of leukocytes in inflammation-induced zymosan the air pouch, and timedependent for the extracts tested in the model of ulcerative colitis induced by DSS 3%, the extract methanol, but not the aqueous C. mexican, significantly reduced the clinical symptoms of colitis, as well as the production of proinflammatory cytokines in the culture of mouse colon, in the histological analysis there was a slight reduction of inflammation in the intestinal mucosa. We concluded that the administration of the extracts resulted in the reduction of cell migration to different sites as well as reducing the edema formation induced by chemical irritant. This study demonstrates for the first time the antiinflammatory effect of aqueous and methanolic extracts from green marine algae Caulerpa mexican

Determinação de parâmetros de qualidade para formas farmacêuticas homeopáticas

All medicine, whether allopathic or homeopathic, must go through strict quality control, which must ratify their characteristics throughout the period of validity. During the time of preparation and storage, solutions of the drugs are in permanent contact with packaging materials that can release undesirable substances to the solution. Several factors may influence the release of packing materials, and factorial design (FD) is a useful tool for analyzing the phenomenon. The aim of this study was the determination of quality parameters for Homeopathic solid (globules) and liquid (drops) dosage forms. It was carried out analysis in homeopathic globules for weight variation, mechanical strength, and moisture content uniformity. For liquid preparations, standard solutions were prepared from natural rubber bulbs, which were subjected to exhaustive extraction with two ethanol solutions (30 and 70%) in the ultrasonic bath for 20 minutes at 25°C and 50°C in three successive cycles. Studies of transfer have been made within five days, by spectrophotometric analysis in the UV region at 312 nm with λmáx and 323 nm for samples in 70% ethanol and 30% respectively. PH values were analyzed. We also conducted two FD studies, where the first, the three-level variables were solvent (chloroform, ethanol and nhexane), sample mass (30, 60 and 90mg), particle size (large disk, small disk and powder sample). In the second study, the solvent level variables were different ethanolic degrees (EtOH 30%, 70% and pure). The percentage of lending in the solutions was 5.5%, 12.4%, 24.2% and 41% of the total estimated in the reference solution. The values of rate constants of transfer were determined in the order of 0.0134 days-1 and 0.0232 days-1 in absorbance values, the solutions in ethanol at 30% and 70% respectively. These results suggest that the speed of transfer of materials from rubber is affected both by the nature of the vehicle as by the temperature