Desempenho de um painel fotovoltaico de baixa tensão, acoplado ao protótipo de um conversor dc/dc topologia Booster

Low voltage solar panels increase the reliability of solar panels due to reduction of in series associations the configurations of photovoltaic cells. The low voltage generation requires DCDC converters devices with high efficiency, enabling raise and regulate the output voltage. This study analyzes the performance of a photovoltaic panel of Solarex, MSX model 77, configured to generate an open circuit voltage of 10.5 V, with load voltage of 8.5 V, with short circuit current of 9 A and a power of 77 W. The solar panel was assembled in the isolated photovoltaic system configuration, with and without energy storage as an interface with a DCDC converter, Booster topology. The converter was designed and fabricated using SMD (Surface Mounted Devices) technology IC (integrated circuit) that regulates its output voltage at 14.2 V, with an efficiency of 87% and providing the load a maximum power of 20.88 W. The system was installed and instrumented for measurement and acquisition of the following data: luminosities, average global radiation (data of INPE Instituto Nacional de Pesquisas Espaciais), solar panel and environment temperatures, solar panel and DC-DC converter output voltages, panel, inverter, and battery charge output currents. The photovoltaic system was initially tested in the laboratory (simulating its functioning in ideal conditions of operation) and then subjected to testing in real field conditions. The panel inclination angle was set at 5.5°, consistent with the latitude of Natal city. Factors such as climatic conditions (simultaneous variations of temperature, solar luminosities and ra diation on the panel), values of load resistance, lower limit of the maximum power required by the load (20.88 W) were predominant factors that panel does not operate with energy efficiency levels greater than 5 to 6%. The average converter efficiency designed in the field test reached 95%

Fabricação de eco-composito com a fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. The fibers were characterized and made matting (non-woven). The phases of the project were consisted to develop methods and to convert these fibers (booster) blended with polyester resin (matrix) in different proportions (10%, 20% and 30%) at the composite. Were studied fiber characteristics, mechanical properties of the composites, water absorption and scanning electron microscopy. Initially, the fibers were treated with solution of sodium hydroxide of 0.05 mols, and then taken to matting preparing at the textile engineering laboratory - UFRN. The composites were made by compression molding, using an orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as initiator (catalyst). To evaluate the mechanical tests (tensile and flexural) and water absorption were made twelve specimens with dimensions 150x25x3 mm were cut randomly. According to the standard method, tensile tests (ASTM 3039) bending tests (ASTM D790) were performed at the mechanical testing of metals at laboratory UFRN. The results of these tests showed that the composite reinforced with 30% had a better behavior when exposed to tension charge; while on the three points bending test showed that the composite reinforced with 10% had a better behavior. In the water absorption test it was possible to see that the highest absorption happened on the composite reinforced with 30%. In the micrographs, it was possible to see the regions of rupture and behavior of the composite (booster / matrix)

Lógos e noûs no Fedro de Platão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Sustentabilidade e responsabilidade socioambiental: crenças provendo a formação de graduandos em administração

This research aims to focus on the education problem, since its source of development is the Research Base: Teachers Training and Qualification of UFRN. Therefore, we seek guidance in the beliefs in sustainability to propose plausible alternatives to promote the education process of UFRN administration undergraduates in order to meet the demands of a market-oriented society, since the market trend is to evolve from environmental guided activities, and future administrators should be trained to meet those conditions. The need to develop an instrument capable of understanding the beliefs of undergraduates on the sustainability problem becomes the object of analysis. This research aims to develop a normative questionnaire to study administration students beliefs in sustainability. The complexity and sensitivity of this research required the integration of various methodological procedures. These proposals were made as follows: analysis and selection of literature, expert validation procedures and psychometric methods and statistics. As for the literature, types of sustainability were identified and categorized, such as: political, social, economic and environmental sustainability. However, it is understood that the educational type, although included in all of those, needed to be converted into another type to fit the theme, since education is believed to be the best way to raise awareness about sustainability. Thus, it was required the categorization of the types, which was defined using criteria such as: contexts, objectives, goals, pathways and hypotheses. The normative questionnaire was the guiding instrument to investigate the role of administration students, regarding the level of knowledge established and regulated by social educational context, especially by becoming a basic condition for carrying out research on beliefs. The study confirmed that the types of sustainability - political, social, economic, environmental and educational - for having institutionalized literatures as sources, in international and national levels, are representative in the identification of future administrators. Therefore, it is believed that the types of sustainability categorized to provide a characterization of sustainability include the structuring of knowledge for undergraduates. The economic and political types, however, were not as representative with respect to their typicality and polarity indices as the educational, environmental and social ones. Although the beliefs of the undergraduates show how much they share ideas on all types, they present more identification with the educational and environmental types. Finally, it is expected that this instrument be subject to application in similar contexts so that it can ascertain whether such statements are part of the knowledge structure of future administrators from other institutions. Therefore, it is expected this strategy to strengthen the validation of the normative questionnaire

Contribuições para a detecção e identificação de faltas em inversores Multiníveis

This work presents contributions in the detection and identication of faults in multilevel inverters through the study of the converters behavior under these operation conditions. Basically, the approached fault consists of an open-circuit in any switch of a three-level clamped diode inverter. The converter operation is characterized in the pre and post-fault states. A wave form behavior analysis of the pole voltage, phase current and dc-bus current is also done, which highlights characteristics that allow the detection of failure and, even, under favorable conditions, the identication of the faulty device. A compensation strategy of the approached fault (open-switch) is also investigated with the purpose of maintaining the driving system operational when a failure occurs. The proposed topology uses SCRs in parallel with the internal switches of the inverter, which allows, in some occasions, the full utilization of the dc-bus

Sistema de conversão de energia eólica baseado no gerador de indução duplamente alimentado: análise e contribuição ao controle da máquina

The humanity reached a time of unprecedented technological development. Science has achieved and continues to achieve technologies that allowed increasingly to understand the universe and the laws which govern it, and also try to coexist without destroying the planet we live on. One of the main challenges of the XXI century is to seek and increase new sources of clean energy, renewable and able to sustain our growth and lifestyle. It is the duty of every researcher engage and contribute in this race of energy. In this context, wind power presents itself as one of the great promises for the future of electricity generation . Despite being a bit older than other sources of renewable energy, wind power still presents a wide field for improvement. The development of new techniques for control of the generator along with the development of research laboratories specializing in wind generation are one of the key points to improve the performance, efficiency and reliability of the system. Appropriate control of back-to-back converter scheme allows wind turbines based on the doubly-fed induction generator to operate in the variable-speed mode, whose benefits include maximum power extraction, reactive power injection and mechanical stress reduction. The generator-side converter provides control of active and reactive power injected into the grid, whereas the grid-side converter provides control of the DC link voltage and bi-directional power flow. The conventional control structure uses PI controllers with feed-forward compensation of cross-coupling dq terms. This control technique is sensitive to model uncertainties and the compensation of dynamic dq terms results on a competing control strategy. Therefore, to overcome these problems, it is proposed in this thesis a robust internal model based state-feedback control structure in order to eliminate the cross-coupling terms and thereby improve the generator drive as well as its dynamic behavior during sudden changes in wind speed. It is compared the conventional control approach with the proposed control technique for DFIG wind turbine control under both steady and gust wind conditions. Moreover, it is also proposed in this thesis an wind turbine emulator, which was developed to recreate in laboratory a realistic condition and to submit the generator to several wind speed conditions.

Metrópole digital: o jovem aprendiz na educação tecnológica

This thesis was elaborated in the scenario of Digital Metropolis Institute (IMD) – a supplementary unit at the Federal University of Rio Grande do Norte in the training of personnel with technical and higher level courses whose technical level training is associated with a process of digital inclusion, with the purpose of attracting young people to this area, with emphasis on Software and Hardware Development. It aims to investigate the cognitive change of young apprentice on technological education and his/her entrance into the labor market, through the formation and the social inclusion proposed by the Instituto Metrópole Digital; understanding the juvenile subjectivity production through the Instituto Metrópole Digital’s education by performance in the labor market; recognizing the Brazilian professional qualification public policies for youth and identifying the role of Tutoring in the learning process during the course of formation of the young apprentice of the technological education proposed by the Instituto Metrópole Digital.The clipping of the object of investigation was the process of cognitive change and constitution of subjectivity of the young apprentice in information technology (IT) in the IMD. It was searched support in theory Freireana as proposal that problematizes the policies and the process of formation and professional qualification, in the perspective of a citizen and liberating consciousness. By qualitative and ethnographic nature, descriptive-explanatory, it counts with the participation of young people, high school students from public and private schools, aged between 15 and 18 years. There are strong aspects: a cognitive change on the young apprentice of technological education onto overdrive high school as the student of the Instituto Metrópole Digital; it happened the social integration for those who remain in the course, both in the neighborhood where they reside and at school where he attended high school, the young man is recognized and becomes reference to other young, favoring him a life projection which when the activities of mentoring is learning motivator, it exerts a positive influence to the young on the continuity of studies, it provides intellectual and institutional affiliation and continuity in the investments to the academic life for a better insertion in the labor market, which refers to the modification of the life project-invest in academic training, in exchange for a technical job in the labor market. There are weak aspects: the absence of professor in the course, in his most important role, which involves awareness of his/her condition in action, in explicit position that the professional practice constitutes as this constitution requires reciprocity of its students and the context in which it operates; fragile formation of mentoring, absence of dialogues in the classroom that favors the formation of subject learning, mainly in guiding action, mediator of the young; There is a lack of methodological proposal to develop real projects on the labor market with problem solving and collaborative learning. It considers that without converting information into knowledge cannot discern clearly enough that there is no direct causal relationship between Professional and technological Education and the level of employability of the young worker certificate. It suggests to the evasion: a greater knowledge of the reality of the student of the Institute Metropolis Digital; better knowledge of youth and their expectations of life project; the Tutoring will be Teacher-tutor; investing in employability conditions effective the young into the labor market.

Desenvolvimento teórico e experimental de FSS com elementos fractais de Gosper em estruturas de multicamadas

The fractal self-similarity property is studied to develop frequency selective surfaces (FSS) with several rejection bands. Particularly, Gosper fractal curves are used to define the shapes of the FSS elements. Due to the difficulty of making the FSS element details, the analysis is developed for elements with up to three fractal levels. The simulation was carried out using Ansoft Designer software. For results validation, several FSS prototypes with fractal elements were fabricated. In the fabrication process, fractals elements were designed using computer aided design (CAD) tools. The prototypes were measured using a network analyzer (N3250A model, Agilent Technologies). Matlab software was used to generate compare measured and simulated results. The use of fractal elements in the FSS structures showed that the use of high fractal levels can reduce the size of the elements, at the same time as decreases the bandwidth. We also investigated the effect produced by cascading FSS structures. The considered cascaded structures are composed of two FSSs separated by a dielectric layer, which distance is varied to determine the effect produced on the bandwidth of the coupled geometry. Particularly, two FSS structures were coupled through dielectric layers of air and fiberglass. For comparison of results, we designed, fabricated and measured several prototypes of FSS on isolated and coupled structures. Agreement was observed between simulated and measured results. It was also observed that the use of cascaded FSS structures increases the FSSs bandwidths and, in particular cases, the number of resonant frequencies, in the considered frequency range. In future works, we will investigate the effects of using different types of fractal elements, in isolated, multilayer and coupled FSS structures for applications on planar filters, high-gain microstrip antennas and microwave absorbers

Física do meio ambiente como disciplina nas licenciaturas em física: proposta de uma unidade didática para ensinar efeito estufa e aquecimento global

In this dissertation we propose a Teaching Unit of Physics to teach content through environmental discussions of the greenhouse effect and global warming. This teaching unit is based on a problem-methodological intervention from the application of the method of the Arch of Charles Maguerez. The methodological foundations of the thesis are embedded in action research and this is structured in five chapters: the first chapter deals with the Physical Environment (FMA) as a subject in Degree Courses in Physics in Brazil, bringing the concern of how this discipline has been taught. We started the first chapter explaining the reasons behind the inclusion of the discipline of Physical Environment in a Physics Degree Courses. Then we did a search on the websites of Institutions of Higher Education, to know of the existence or not of this discipline on curricular. We then analyzed the menus to see what bibliographies are being adopted and what content of Physics are being worked, and how it has been done. The courses surveyed were those of Federal and Federal Institutes Universities. Thus ended the first chapter. Given the inseparability between studies in Physics Teaching and studies on competencies, skills and significant learning, wrote the second chapter. In this chapter we discuss the challenge of converting information into knowledge. Initially on initial teacher training, because even if this is not our focus, the study is a discipline on the upper reaches, therefore, offered to future teachers. Then we talked about the culture of knowledge, where we emphasize the use of a teaching approach that promotes meanings taught by content and make sense to the student. We finished the third chapter, making some considerations on skills and abilities, in order to identify what skills and competencies were developed and worked during and after the implementation of Curriculum Unit. The third chapter is the result of a literature review and study of the radioactive EarthSun interaction. The subjects researched approach from the generation of energy in the sun to topics stain solar coronal mass ejections, solar wind, black body radiation, Wien displacement law, Stefan-Boltzmann Law, greenhouse effect and global warming. This chapter deals with material support for the teacher of the aforementioned discipline. The fourth chapter talks about the arc method of Charles Maguerez; Here we explain the structure of each of the five steps of the Arc and how to use them in teaching. We also show another version of this method adapted by Bordenave. In the fifth and final chapter brought a description of how the method of Arc was used in physics classes of Environment, with students majoring in Physics IFRN Campus Santa Cruz. Here, in this chapter, a transcript of classes to show how was the application of a problem-based methodology in the teaching of content proposed for Physics Teaching Unit from the environmental discussion about the greenhouse effect and global warming phenomena

Contribuições à estratégia de controle sem detecção de harmônicos aplicada a um filtro ativo de potência paralelo

The conventional control schemes applied to Shunt Active Power Filters (SAPF) are Harmonic extractor-based strategies (HEBSs) because their effectiveness depends on how quickly and accurately the harmonic components of the nonlinear loads are identified. The SAPF can be also implemented without the use of the load harmonic extractors. In this case, the harmonic compensating term is obtained from the system active power balance. These systems can be considered as balanced-energy-based schemes (BEBSs) and their performance depends on how fast the system reaches the equilibrium state. In this case, the phase currents of the power grid are indirectly regulated by double sequence controllers with two degrees of freedom, where the internal model principle is employed to avoid reference frame transformation. Additionally the DSC controller presents robustness when the SAPF is operating under unbalanced conditions. Furthermore, SAPF implemented without harmonic detection schemes compensate simultaneously harmonic distortion and reactive power of the load. Their compensation capabilities, however, are limited by the SAPF power converter rating. Such a restriction can be minimized if the level of the reactive power correction is managed. In this work an estimation scheme for determining the filter currents is introduced to manage the compensation of reactive power. Experimental results are shown for demonstrating the performance of the proposed SAPF system.

Projeto de absorvedores de micro-ondas integrados com superfícies seletivas em frequência

Considering the fact that, the use of wireless communication systems has grown too fast, investigations concerning absorbers of electromagnetic waves has called closer attention of researchers. It is applicable from indoor systems to military applications. Paralleling with this growth, some extremely relevant investigations through Frequency Selective Surfaces (FSS) allows its filter property to be applicable in several systems, for example: reflector antennas, band-pass radomes, and absorbers, which are the main objective of this work. Therefore, the main goal of this work concerns to design micro-waves absorbers through FSS. Thus, the methodology consists basically in two steps: the first step concerns a theoretical and numerical analysis of the structures involved in the process of absorption, the second step, the analysis of the cascaded structures. In order to carry out the analysis, the Equivalent Circuit Method will be used. This method provides characteristics of transmission from the structure, for a plane wave incidence and it requires an extremely limited computing resource in relation if compared to full wave analyses method. Hence, it is useful to allow fast predictions of the development of the structures. Furthermore, a spreading matrix will be used in order to cascade the conductive FSS and the resistive FSS achieving absorption characteristics in the designed band. The experimental results used for the analysis are found in the literature due to the difficulty of building soon, given that it is not a simple construction technique. To conclude, a mathematical development through the Equivalent Circuit Method of a FSS modeling with cross-dipole geometry and a resistive FSS will be presented, as well as the cascading involving the two structures. The same setting is used with a square loop geometry. Besides it, the next steps will be discussed in the conclusion.

Caracterização de superfícies seletivas de frequência de periódicas e não-periódicas

The past years have seen a great interest in the use of frequency selective surfaces (FSS), as spatial filters, in many microwave applications. Among these, we highlight applications in telecommunication systems (such as satellite communications and radar), high gain antennas (combined with planar antennas) and (home and industrial) microwave ovens. The FSS is usually composed of two-dimensional periodic arrays, with equally spaced elements, which may be metallic patches (printed on dielectric substrates) or aperture (holes in thin metal surfaces). Using periodic arrays, the FSS have been able to meet the demands of the telecommunications industry. However, new demands are finding technological limitations. In this context, adverse filtering requirements have forced designers to use FSS optimization methods to find specific formats of FSS elements. Another alternative that has been used to increase the selectivity of the FSS is the cascaded FSS, a simple technique that has as main drawback the increased dimensions of the structure, as well as its weight. This work proposes the development of a new class of selective surfaces frequency (FSS) composed of quasi-periodic (or non-periodic) arrangements. The proposed FSS have no array periodicity, in relation with the spatial position of their elements. The frequency responses of these structures were simulated using commercial softwares that implement full-wave methods. For the purpose of validation of this study, FSS prototypes were built and measured, being possible to observe a good agreement between simulated and measured results. The main conclusions of this work are presented, as well as suggestions for future works.

Estudo da variação da periodicidade e do acoplamento entre superfícies seletivas de frequência com elementos fractais e helicoidais em estruturas de multicamadas

This work aims to investigate the behavior of fractal and helical elements structures in planar microstrip. In particular, the frequency selective surfaces (FSSs) had changed its conventional elements to fractal and helical formats. The dielectric substrate used was fiberglass (FR-4) and has a thickness of 1.5 mm, a relative permittivity 4.4 and tangent loss equal to 0.02. For FSSs, was adopting the Dürer’s fractal geometry and helical geometry. To make the measurements, we used two antennas horns in direct line of sight, connected by coaxial cable to the vector network analyzer. Some prototypes were select for built and measured. From preliminary results, it was aimed to find practical applications for structures from the cascading between them. For FSSs with Dürer’s fractal elements was observed behavior provided by the multiband fractal geometry, while the bandwidth has become narrow as the level of iteration fractal increased, making it a more selective frequency with a higher quality factor. A parametric analysis allowed the analysis of the variation of the air layer between them. The cascading between fractal elements structure were considered, presented a tri-band behavior for certain values of the layer of air between them, and find applications in the licensed 2.5GHz band (2.3-2.7) and 3.5GHz band (3.3-3.8). For FSSs with helical elements, six structures were considered, namely H0, H1, H2, H3, H4 and H5. The electromagnetic behavior of them was analyzed separately and cascaded. From preliminary results obtained from the separate analysis of structures, including the cascade, the higher the bandwidth, in that the thickness of the air layer increases. In order to find practical applications for helical structures cascaded, the helical elements structure has been cascaded find applications in the X-band (8.0-12.0) and unlicensed band (5.25-5.85). For numerical and experimental characterization of the structures discussed was used, respectively, the commercial software Ansoft Designer and a vector network analyzer, Agilent N5230A model.

Desenvolvimento e caracterização de um eco-compósito de poliuretano de mamona e fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. Project phases consisted on the initial treatment of fibers with alkaline solution (NaOH) at 0.05 mols for removal of impurities, developing methods to convert these fibers (reinforcement) blended with castor oil polyurethane (matrix) in eco-composite with different proportions (5%, 10%, 15% and 20%). Fiber properties were evaluated by analysis of SEM, XRD and FTIR. The composites were produced by compression molding with dimensions 30x30x1cm. For characterization of the composites the following tests were performed: mechanical (tensile, compression, shore hardness A) according the standards and testing water absorption, moisture regain and biodegradation. The analysis of thermal properties on fibers and composites were by TG, DSC, thermal conductivity, resistivity, heat capacity and thermal resistance. Analyzing the results of these tests, it was observed that the composite reinforced with 20% showed a better thermal performance between others composites and dimensional stability when compared to commercial thermal insulation. Also is possible to observe a balance in moisture absorption of the composite being shown with its higher absorption rate in this same sample (20%). The micrographs show the fiber interaction regions with polyurethane to fill the empty spaces. In hardness and compression testing can identify that with increasing percentage of the fiber material acquires a greater stiffness by making a higher voltage is used for forming necessary. So by the tests performed in eco-composites, the highest percentage of fiber used as reinforcement in their composition obtained a better performance compared to the remaining eco-composites, reaching values very close to the PU.

Implementação de conversor de polarização linear-circular para antenas de microfita usando metasuperfícies

This work aims to propose a new model of metasurface with simplified basic cell, able to convert linearly polarized signals generated by planar antenna array in circularly polarized signals, for the ISM frequency band (2.45 GHz), with good bandwidth of return loss and axial ratio. To study the behavior of the proposed structure, the metasurface is coupled to three different structures. First, initial tests are made with the metasurface coupled to a microstrip antenna in its simple configuration. Then the metasurface is coupled to an array with two elements of patch type. And later it is coupled to an optimized array, that uses a stub in its main feed, to get a better impedance matching. The structures are analyzed numerically through Ansoft HFSS™, and to validate these results, the structures are characterized experimentally. The characteristics of transmissions simulated and measures are presented. A good agreement between simulated and measured results was obtained. The structure proposed here has the advantage of meeting the desired characteristics, with a simple geometry to be built using a low-cost substrate (FR-4).