Micropartículas de poli (ácido lático-co-ácido glicólico) obtidas por spray drying para a liberação prolongada de metotrexato

Methotrexate (MTX) is a drug used in the chemotherapy of some kind of cancers, autoimmune diseases and non inflammatory resistant to corticosteroids uveits. However, the rapid plasmatic elimination limits its therapeutic success, which leads to administration of high doses to maintain the therapeutic levels in the target tissues, occurring potential side effects. The aim of this study was to obtain spray dried biodegradable poly-lactic acid co-glycolic acid (PLGA) microparticles containing MTX. Thus, suitable amounts of MTX and PLGA were dissolved in appropriate solvent system to obtain solutions at different ratios drug/polymer (10, 20, 30 and 50% m/m). The physicochemical characterizing included the quantitative analysis of the drug using a validate UV-VIS spectrophotometry method, scanning electron microscopy (SEM), infrared spectrophotometry (IR), thermal analyses and X-ray diffraction analysis. The in vitro release studies were carried out in a thermostatized phosphate buffer pH 7.4 (0.05 M KH2PO4) medium at 37°C ± 0.2 °C. The in vitro release date was subjected to different kinetics release models. The MTX-loaded PLGA microparticles showed a spherical shape with smooth surface and high level of entrapped drug. The encapsulation efficiency was greater then 80%. IR spectroscopy showed that there was no chemical bond between the compounds, suggesting just the possible occurrence of hydrogen bound interactions. The thermal analyses and X-ray diffraction analysis shown that MTX is homogeneously dispersed inside polymeric matrix, with a prevalent amorphous state or in a stable molecular dispersion. The in vitro release studies confirmed the sustained release for distinct MTX-loaded PLGA microparticles. The involved drug release mechanism was non Fickian diffusion, which was confirmed by Kornmeyer-Peppas kinetic model. The experimental results demonstrated that the MTX-loaded PLGA microparticles were successfully obtained by spray drying and its potential as prolonged drug release system.

Determinação de parâmetros de qualidade para formas farmacêuticas homeopáticas

All medicine, whether allopathic or homeopathic, must go through strict quality control, which must ratify their characteristics throughout the period of validity. During the time of preparation and storage, solutions of the drugs are in permanent contact with packaging materials that can release undesirable substances to the solution. Several factors may influence the release of packing materials, and factorial design (FD) is a useful tool for analyzing the phenomenon. The aim of this study was the determination of quality parameters for Homeopathic solid (globules) and liquid (drops) dosage forms. It was carried out analysis in homeopathic globules for weight variation, mechanical strength, and moisture content uniformity. For liquid preparations, standard solutions were prepared from natural rubber bulbs, which were subjected to exhaustive extraction with two ethanol solutions (30 and 70%) in the ultrasonic bath for 20 minutes at 25°C and 50°C in three successive cycles. Studies of transfer have been made within five days, by spectrophotometric analysis in the UV region at 312 nm with λmáx and 323 nm for samples in 70% ethanol and 30% respectively. PH values were analyzed. We also conducted two FD studies, where the first, the three-level variables were solvent (chloroform, ethanol and nhexane), sample mass (30, 60 and 90mg), particle size (large disk, small disk and powder sample). In the second study, the solvent level variables were different ethanolic degrees (EtOH 30%, 70% and pure). The percentage of lending in the solutions was 5.5%, 12.4%, 24.2% and 41% of the total estimated in the reference solution. The values of rate constants of transfer were determined in the order of 0.0134 days-1 and 0.0232 days-1 in absorbance values, the solutions in ethanol at 30% and 70% respectively. These results suggest that the speed of transfer of materials from rubber is affected both by the nature of the vehicle as by the temperature

Produção e avaliação de nanoemulsão catiônica como possível vetor não-viral para pIRES2-EGFP

Gene therapy is based on the transfer of exogenous genetic material into cells or tissues in order to correct, supplement or silencing a particular gene. To achieve this goal, efficient vehicles, viral or non-viral, should be developed. The aim of this work was to produce and evaluate a nanoemulsion system as a possible carrier for no-viral gene therapy able to load a plasmid model (pIRES2-EGFP). The nanoemulsion was produced by the sonication method, after been choose in a pseudo-ternary phase diagram build with 5 % of Captex 355®, 1.2 % of Tween 80®, 0.8 % of Span 80®, 0.16% of stearylamine and water (to 100 %). Measurements of droplet size, polydispersity index (PI), zeta potential, pH and conductivity, were performed to characterize the system. Results showed droplets smaller than 200 nm (PI < 0.2) and zeta potential > 30 mV. The formulation pH was near to 7.0 and conductivity was that expected to oil in water systems (70 to 90 μS/s) A scale up study, the stability of the system and the best sterilization method were also evaluated. We found that the system may be scaled up considering the time of sonication according to the volume produced, filtration was the best sterilization process and nanoemulsions were stable by 180 days at 4 ºC. Once developed, the complexation efficiency of the plasmid (pDNA) by the system was tested by agarose gel electrophoresis retardation assay.. The complexation efficiency increases when stearylamine was incorporated into aqueous phase (from 46 to 115 ng/μL); regarding a contact period (nanoemulsion / pDNA) of at least 2 hours in an ice bath, for complete lipoplex formation. The nanoemulsion showed low toxicity in MRC-5 cells at the usual transfection concentration, 81.49 % of survival was found. So, it can be concluded that a nanoemulsion in which a plasmid model was loaded was achieved. However, further studies concerning transfectation efficiency should be performed to confirm the system as non-viral gene carrier

O acolhimento no ambulatório de um hospital universitário na visão de usuários

This present study of quantitative/qualitative approach, aims to analyze the outpatient care at the Hospital Universitário Onofre Lopes (HUOL), and, having as guide, the reception of the user. In this regard were invited and interviewed 20 users. Besides the interviews, conducted in a period of 45 days, in this same period of time was used a field diary for more significant notes of observations more significant. In the analysis, we drafted the socio-demographic profile of the group and identified their main complaints, problems and suggestions. For this, we have built graphics, tables and pictures, in addition to standing out their testimony, as a resource for better understanding of the subjective aspects. The theoretical reference consisted of documents from the Ministry of Health about the reception and humanization, and the studies of Merhy, Franco, Pinheiro, Matumoto, Mariotti, Teixeira, among others. The results show the ambulatory of HUOL as a privileged space and of credibility, where users commonly, find answers to their problems. However, these same users were unanimous in saying the difficulties they face in obtaining consultations, from the basic unit, until the hospital. Regarding the service, although they feel satisfied as for the assistance received, they list a series of problems, of structural relationship order: lack of visual signalling, information, wheelchairs, hygiene, in the waiting rooms that offer some comfort, besides the inattention of some professionals. In summary, in the study, undertaken now, we cannot say that there is in the reality studied, the reception, in its full meaning, but the HUOL as hospital-school, has all the potential to accomplish it

Diagnósticos de enfermagem em pacientes no pós-operatório imediato de prostatectomia de um Hospital Universitário de Natal-RN

The characterization of the nursing diagnoses in prostatectomized patients is important to provide an unique nursing language, facilitating the communication between professionals and patients. The objective of this study was to analyze the nursing diagnoses of patients in the immediate prostatectomy postoperative period. This is a cross-sectional and descriptive study, developed at the surgical-clinic of Onofre Lopes University Hospital, in the Natal City RN - Brazil. The sample was composed of 50 patients included by the criteria: have presented a diagnosis of a benign prostatic hyperplasia or a prostate cancer, have been subjected to a prostate surgery at the mentioned hospital, and have been in the immediate postoperative period at the moment of the data collection. The exclusion criteria were: haven t been in an appropriate physical and mental condition, have presented a brain vascular disease, a lung disease, an advanced liver disease, a heart disease or a extensive coronary artery disease. The data collection instruments were: the script of an interview and physical examination. The data collection period was between November 2010 and April 2011. The data were organized in two phases: the diagnostic process and the construction of the database. The project was approved by the Ethics Committee of the Federal University of Rio Grande do Norte The results showed that most patients came from the countryside, was living with partners, had an average of 67.78 years, was pensionerthose with low schooling, Catholic and often did not perform preventive examinations of prostatic disease. The patients showed an average of 9.48 nursing diagnoses, defining characteristics 21.70 and 20.72 related or risk factors per patient. We identified 30 nursing diagnoses, of which 7 were above the 75 percentile: Risk of falls, Impaired ambulation, Risk of infection, Self-care deficit bath / hygiene and dress up and Risk for deficient fluid volume. The top six nursing diagnoses were in all patients, and therefore could not apply any statistical test. The others ND were associated with their defining characteristics and related or risk factors. We conclude that the nursing diagnoses identified in this study contribute to the progress of the nursing care to the prostatectomized patients in post-surgery period, allowing the deployment of nursing actions for the effective resolution of identified problems

Uma contribuição crítica para o redesenho de cadeiras de rodas adaptadas para crianças e adolescentes com paralisia cerebral

This work was aimed at making a critical analysis of the product wheelchair, both for using four different models, which were objects of study of the dissertation of Cláudia Regina Cabral Galvão, entitled Critical Analysis of the Mobility Products Seated a wheelchair - Used by Children and Adolescents with Cerebral Palsy in Natal / RN and other municipalities of Rio Grande do Norte . This product is considered an instrument in the social rehabilitation of great importance for people with physical disabilities. This study aims to position the issue and develop comments on technical up grading of certain models according to the needs of the user. Describes features of four models in search searched through catalogs in order to know its advantages and disadvantages of use. Were presented the definitions of ergonomics and ergonomic aspects to be considered on a design, the study of anthropometry and its recommendations. Discussions the methodology of project design in two parts: the first, on the structuring of design problem (formulation, analysis, synthesis and evaluation.) And the second on the project (design and development, implementation and evaluation and solution). With that review will include the possibilities for a new redesign of the wheelchair, based on forms of adaptation in order to achieve the target that was compressed by the average population studied. Seeks to that this project makes an improvement in quality of life of people in wheelchairs by including these people in society but also the improvement of rehabilitation

Análise crítica dos produtos de mobilidade sentada - cadeiras de rodas - utilizados por crianças e adolescentes com paralisia cerebral em Natal/RN e outros municípios do Rio Grande do Norte

The objective of this work is to critically analyze the seated mobility adaptive equipment, wheelchair, used by non-ambulatory children/adolescents diagnosed with cerebral palsy of the quadriplegy type with ages in between 0-18 years old in the municipal city of Natal/RN and of other ones in the state of Rio Grande do Norte. This study is characterized as descriptive as it took into consideration the individualized conditions of each child/adolescent and of their home environment, and also evaluates the condition of the used seated mobility devices such as wheelchairs or strollers. Thirty three (33) subjects which had a wheelchair prescribed by a healthcare professional specialist in adaptive equipment within the past 3 years were selected. A questionnaire was applied through a phone with the patient s primary care giver or parents. The results obtained showed that all the equipment being used had an anatomical seat and back and the tilt system mechanism and even though most of the patients required small individual adjustments upon receiving the wheelchair in order to accommodate to the patients characteristics. From the point of view of the caregiver/parents interviewed, 97% described satisfied with the equipment and report assistance with mobility (97%), comfort (82%) and good posture (82%) as the main positive aspects from the equipment. The results also describe the aspects related to the maintenance, time used and activities developed that were reported by the patients. The conclusion therefore is that in order to select the equipment to meet the needs of the consumer it is necessary that: an appropriate wheelchair prescription takes place, the up-to-date knowledge of equipment available in the market, the appropriate use of the resources from the concession programs of the government that purchase equipment and the establishment of link in between the manufacturers, patients and the caregivers

Gestão ambiental em cadeias produtivas agroindustriais: um estudo em um aglomerado produtivo da caprinovinocultura no Estado do Rio Grande do Norte

This thesis aims to investigate the perception and behavior of goat and sheep rural producers from Central Cabugi Region of Rio Grande do Norte state, in terms of the sector competitiveness, the cooperation mechanisms, information and environmental practices integration in the supply chain, including their customers, and also among the local producers and other institutions that support this agribusiness cluster. The research problem is related to the environmental impacts from goat and sheep breeding. This problem can also be intensified by the organization of producers in a cluster. Then, it is important to examine how the environmental issues are considered by the rural producers and their perception of their suppliers, customers and the institutions that support this activity. The methodology used in this work involved literature review of the topics of supply chain management, green supply chain, clusters development and sustainable livestock. An exploratory survey research was also conducted by personal interviews using questionnaires. Three statistic techniques were used to compile the gathered data: descriptive statistics, cluster analysis, and Chi-square tests. Two clusters were found in this study, however, the entire sample believes the sector of goat and sheep breeding is a medium competitive activity. On the other hand, for the variables of the importance of environmental practices for competitiveness , perception of environmental impacts and environmental benefits from farm vegetation management , the research found 2 distinct groups of individuals when those variables were analyzed together the green supply chain management group of variables in the cluster analysis. Beyond competitiveness perception, no degree of difference was found for the use of insecticides too. The chi-square tests present that producers having at least elementary education, lands bigger 100 hectares and located in the cities of Angicos or Lajes tend to have a higher perception to supply chain management and environmental awareness issues than those with no or incomplete first-level education, producing in lands smaller than 100 hectares and located in the cities of Afonso Bezerra or Pedro Avelino. The chi-square tests also show the amount of milk produced, family s income and associational condition are not related with the variables used in the clusters composition. In this context, this work contributes to planning clusters development strategies and enhancing the production chain sustainability. This Master of Science Thesis can also help to introduce the environmental variable in the project, assessment and monitoring of development policies as well

Anodização para obtenção de membranas cerâmicas

This a study on the achievement of alumina membranes by the method of anodizing. From this method got up a layer of aluminum oxide on the anodic metal, who presented the basic properties necessary for the application as a support for the production and acquisition of nanomaterials, such as porosity nano and resistance to high temperature, and other properties, as resistance to corrosion, and chemical, high ranking of the structure and pore size of the pores. The latter, ranging from 10 to 100nm depended on the electrolyte used, which in this study was the H2SO4. To remove all remaining aluminum, it is a bath of dissolution with HCl and CuCl where the residual aluminum has been withdrawn, and the deep pores were opened after chemical treatment with NaOH. After the dissolution, the membranes were calcined at temperatures of 300, 600 and 900° C, and sintered at temperatures of 1200 and 1300º C to win mechanical strength, porosity and observe the desired crystallization. Then went through analyses of composition through X-ray diffraction and morphology of the microstructure through a scanning electron microscope. The method was effective for obtaining alumine membranes applied in the processes of production of materials in nano

Análise do desempenho térmico de um sistema de aquecimento solar utilizando coletor com superfície absorvedora em chapas de PVC

It s presented a solar collector to be used in a system for heating bath water, whose main characteristic is its low cost. The collector consists of five plates of PVC with 10 mm thick, 200 mm in width and 1400mm in length, with an area equal to 1.4 square meters. The plates were connected in parallel to the ends of PVC tubes of  40 mm and 32 mm. The plates were coated on one side with aluminum sheets of soft drinks and beers cans open. The system worked on a thermosiphon and was tested in two configurations: the plates uncoated and coated with aluminum material, to determine the influence of material on the efficiency of the collector. For both configurations was used EPS plates below the surface to minimize heat losses from the botton. The thermal reservoir of the heating system is, also, alternative and low cost, since it was constructed from a polyethylene tank for storing water, with volume of 150 end 200 liters. It will be presented the thermal efficiency, heat loss, water temperature of the thermal reservoir at the end of the process and simulation of baths for a house with four residents. The will be demonstrated thermal, economic and material viability of the proposed collector, whose main innovation is the use of recyclables materials, cans of beer and soft drinks, to increase the temperature of the absorber plate.

Estudo térmico de um sistema solar de aquecimento de água residencial para duas configurações de superfície absorvedora

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are its low cost and easy manufacturing and assembly. The absorbing surface of the collector is formed by an aluminum plate with eight flaps where they lodge PVC pipes. The catchment area of solar radiation corresponds to 1.3 meters. The collector box was made of wood, is covered by transparent glass and thermal insulation of tire chips and expanded polystyrene (EPS). Absorber tubes were connected in parallel through the use of PVC fittings and fixed to the plate by the use of metal poles and rivets. The entire absorber received paint flat black for better absorption of sunlight. The system worked on a thermosiphon assembly and absorber of the collector has been tested in two configurations: with the tubes facing up, directly exposed to the impact of sunlight and facing down, exchanging heat with the plate by conduction. It was determined the most efficient configuration for the correct purpose. The solar collector was connected to a thermal reservoir, also alternative, low-cost forming the system of solar water heating. We evaluated thermal parameters that proved the viability of the heating system studied

Construção e análise de desempenho de um forno/fogão solar tipo caixa construído a partir de uma sucata de pneu

An alternative box-type solar cooker built starting from the scrap of a tire and a scrap of old office chair is presented, which principles functions are the effect greenhouse and the concentration. The tire served as structure for making of is the baking enclosure where the absorber (roasting pan 20x30cm) of the solar is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven/cook for the concentration of the radiation and a reflecting parable was introduced in the baking enclosure for the exploitation of the incident reflected radiation inside of the oven/cook. The oven/cook is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove/cook in study will be demonstrate. The average internal temperature of the absorber was around 152,3°C and the internal temperature around 110°C. Will demonstrate that toits low cost and good thermal performance, represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Análise do desempenho térmico de um sistema de aquecimento solar de baixo custo

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are low cost and easy manufacturing and assembly. The system operates under natural convection or thermosiphon. The absorbing surface of the collector is formed by twelve PVC pipes of 25 mm outside diameter connected in parallel via connections in T of the same material. The tubes were covered with absorbing fins made with recycled aluminum cans. We studied eight settings between absorber plate, thermal insulating EPS boards and thermal reservoirs 150 and 200 liters. It was determined the most efficient configuration for the correct purpose. We evaluated thermal parameters that proved the viability of the heating system studied

Construção e analise de desempenho de um sistema de aquecimento solar de água utilizando placa de policarbonato como superfície absorvedora

It was studied a system for heating water to be used to obtain water for bathing at home, the absorbing surface of the collector is formed by one plate of polycarbonate. The polycarbonate plate has 6 mm thick, 1.050 mm wide and 1.500 mm long with an area equal to 1,575 m². The plate was attached by its edges parallel to PVC tubes of 32 mm. The system worked under the thermo-siphon and was tested for two configurations: plate absorber with and without isolation of EPS of 30 mm thick on the bottom surface in order to minimize heat losses from the bottom. The tank's thermal heating system is alternative and low cost, since it was constructed from a polyethylene reservoir for water storage, with a volume of 200 liters. Will present data on the thermal efficiency, heat loss, water temperature of thermal reservoir at the end of the process simulation and baths. Will be demonstrated the feasibility of thermal, economic and material pickup proposed for the intended purpose.

Estudo das interações polifenol-proteína e das reações de escurecimento não-enzimático para o processamento de cajuína

The cashew, a fruit from Brazilian Northeast is used to produce juice due to its flavor and vitamin C richness. However, its acceptance is limited due to its astringency. Cajuína is a derivate product appreciated by its characteristic flavor, freshness and lack of astringency, due to tannin removal. Cajuína is a light yellow beverage made from clarified cashew juice and sterilized after bottling. It differs from the integral and concentrated juice by the clarification and thermal treatment steps. Many problems such as haze and excessive browning could appear if these steps are not controlled. The objective of this work was divided into two stages with the aim to supply process information in order to obtain a good quality product with uniform characteristics (sensory and nutritional). Polyphenol-protein interaction was studied at the clarification step, which is an empirical process, to provide values on the amount of clarifying solution (gelatin) that must be added to achieve a complete juice clarification. Clarification essays were performed with juice dilutions of 1:2 and 1:10 and the effect of metabissulfite and tannic acid addition was evaluated. It was not possible to establish a clarification point. Metabissulfite did not influenced the clarification process however tannic acid addition displaced the clarification point, showing the difficulty visual monitoring of the process. Thermal treatment of clarified juice was studied at 88, 100, 111 e 121 °C. To evaluate the non-enzymatic browning, vitamin C, 5-hidroximetilfurfural (5-HMF) and sugar variation were correlated with color parameters (reflectance spectra, color difference and CIELAB). Kinetic models were obtained for reflectance spectra, ascorbic acid and 5-HMF. It was observed that 5-HMF introduction followed a first order kinetic rate at the beginning of the thermal treatment and a zero order kinetic at later process stages. An inverse correlation was observed between absorbance at 420 nm and ascorbic acid degradation, which indicates that ascorbic acid might be the principal factor on cajuína non-enzymatic browning. Constant sugar concentration showed that this parameter did not contribute directly to the nonenzymatic browning. Optimization techniques showed showed that to obtain a high vitamin C and a low 5-HMF content, the process must be done at 120 ºC. With the water-bath thermal treatment, the 90 °C temperature promoted a lower ascorbic acid degradation at the expense of a higher 5-HMF level