Critérios comportamentais utilizados por técnicos na avaliação do desempenho esportivo de futebolista das categorias de base

Currently one of the major concerns in sports is to identify, select, discover and reveal talents in soccer. As principal reasons is perceived the search direct or indirect for resources for players, clubs, media, sports brands and their sponsors. However, high salaries are an exception and not a rule, because the majority of professional players in Brazil receives 1 minimum salary per month. It is also known that on professional clubs, daily, arriving several players to try to be a professional soccer player, however, the majority of clubs - almost all does not present methodological, systematic and analytical aspects to select promising players. The selective processes ("sieves" or "big sieves") developed by technical observers ( olheiros") summarized in the observation of the sportive performance of a big group of players in a period of few minutes given to each player. In this period the target behavior is the ability with the ball. If promising players are identified on that selection, they are referred to the club for a new observation, which will be conducted by the responsible coach of base category in question. It is understood by base categories, the amateur categories (not professional), to serve as a "base" for the formation of the cast of professional clubs. What are sub-13 (under 13 years), sub-15 (under 15 years), sub-17 (under 17 years) and sub-20 (under 20 years). The absence of common criterias and performance indicators of these professionals may hamper the evaluation of promising players, and be a costly activity for the club. This study proposes to identify, characterize and categorize the criterias and methods of behavioral evaluation, used by coaches of base categories of Rio Grande do Norte (RN) to evaluate the sportive performance of young soccer players, with the purpose of to compare the criterias of evaluation of sportive performance of young soccer players, used by coaches with different time of experience in function. The proposal had 2 pilot studies, the first (June and July, 2007) were interviewed 29 coaches, 17 of category sub-13 and 12 of category sub-17. The data were tabulated and organized into spreadsheets in order to describe, and developed a set of descriptors of behavior. And the second (May and June, 2008), with revisions made based on observations, analysis and descriptions found in the first, were interviewed 14 technical of category sub-15. After the results found in pilots, it was possible to outline the study in question, which had 46 coaches base categories of the RN. And from the results show that the characteristic of greatest importance, according to the interviewees was the behavior, the 2nd most important characteristic considered was the motivation, the 3rd was the ability and the 4th was the physical condition and the last was the affiliation. And by analyzing the results to the methods of evaluation of sportive performance used by coaches, it was noted clearly that most uses only the observation to select young soccer players. Therefore, needs a systematization to the selection of soccer players, since there is complexity in the verification of characteristics and aspects involved with purpose to avoid wrong evaluations and selections and the results negligible

Programa de Avaliação de Desempenho: elementos constitutivos e pressupostos na prática avaliativa

This study analyzes the perceptions of technical and administrative UFPA, in relation to the insertion of the components and assumptions of DBP in evaluation practice. Addresses the history, concepts, meanings, about AD methods, skills, evaluation skills, the APF and AD UFPA and Programme itself. The research is characterized as a hypothetical-deductive, descriptive and applied, using the case study. Data were analyzed using a quantitative approach, using the descriptive and inferential statistics. Data were collected through the application of questionnaires to 222 technical and administrative searched IFES, not occupants of FG and CD. The results indicate that the factors perceived in relation to the constituent elements such as: evaluation practice, measurement of competence, program management, timing, individual skills and fundamentals of the program and those related to assumptions such as: democratic process, integrative perspective, character development and pedagogical continuous evaluation practices are perceived in the evaluation process. The study concludes that comparing the results of the constituent elements and assumptions of the PAD of thechnical-administrative UFPA, it can be said about a tendency to change, though subtle, compared to the traditional model of AD, directed only to the granting of career progression for a new logic based on the results, showing an early effectiveness of the program evaluation practice by law and by the Institution. The results are confirmatory of advance evaluation practice in the institution, more so than has previously been expected, which demonstrates the value of scientific criteria of scientific research

Promoção, vencimento e avaliação de desempenho do professor do ensino fundamental: o PCCR da rede municipal de ensino de Natal/RN (2004-2010)

This study is about the enhancement of the elementary school in Natal/RN, (PCCR - Law No. 058/2004), concerning to the horizontal promotion through the performance evaluation. It uses as reference the education policy on the legislative field hegemony and the managerial model. The analysis of the teacher´s valorization is based on the policy of Funds (Fundef and Fundeb) in the Brazilian social and educational agenda. The study focuses on the Career Plan, Career and Remuneration of teachers in the period (2004-2010).The study focuses on the Career Plan, Career and Remuneration of teachers in the period (2004-2010). The thesis argues for the necessity to adopt a direct relationship between career development and horizontal promotion for more others fifteen classes, no matter to any conditioning variables. In addition, the performance shall be evaluated by interval of 25 years to reach at least the provisions decided in the law, which determines the salary adjustment in 5% at every two years, as pointed at the PCCR, about teachers remuneration, and teachers qualifications. A work of a bibliographic and a documental review about the education funding with the purpose of enhancement of educational work, career concepts, and also promotion and evaluation performance as well was performed based on experts authors in this field. The survey was organized with the aim of articulating quantitative and qualitative information, analyzing data from the teacher's salary - payrolls and paychecks - also applying a questionnaire. After the implementation of the PCCR, it was found that the wage indices for horizontal promotion during the teaching career are tied to a strategy for evaluating the performance which disqualifies the teacher‟s salaries in a minimum percentage of 25% (up to 25 years) and there are also elements that disturb the promotion strategy. The national minimum wage was set in three salaries by the PSPN Lei nº11.738/2008 but it never reaches the three salaries at Natal/RN educational system.Otherwise, the elements that structure the horizontal promotion in fifteen classes, throughout the career, flout the minimum years of teaching work, long established in 25 years. In addition, changes in terms in the salary increase depend on individual efforts by professional development through titration. Concerning to the career, despite of the category approving its PCCR, neither this instrument nor the Funds Policy managed to establish regulations were able to cope effective rules for valuing the teachers in the educational district system. It is necessary to ensure, in percentage terms and financial, the real remuneration of teachers with the attainment of horizontal promotion, reviewing the elements that structure the career and the determinants of performance evaluation.

Análise do processo de avaliação de desempenho ambiental face às diretrizes da ISO 14031: um estudo de caso

The present dissertation aims to analyze the evaluation process of environmental performance inside an organization from the building construction section of civil construction based on the NBR ISO 14031 guidelines, which provide orientation regarding the implementation of this project towards the internal organizational management. The theoretical research has addressed concepts and historical development of environmental management inside organizations, from the emergence of the first models to the strengthening of environmental management through the standardization of the Environmental Management System caused by the publication of ISO 14001. It has also addressed the evaluation of environmental performance, the NBR ISO 14031 (concepts, types of indicators of evaluation of environmental performance, the elaboration process of such indicators, as well as its use and evaluation by the high administration). The research has an applied character, with exploratory and descriptive goals, and a qualitative approach based on case study. The data collection will be made through questionnaires, interviews, and documental analysis. Through the present research project, one expects to learn the elements taken into consideration by the organization for the elaboration and selection of indicators; to identify which interested parties contribute in the aforementioned process; to discover which sources are taken into consideration by the organization while establishing its environmental performance goals; to learn how the different kinds of environmental indicators are handled by organizations on daily basis, considering the existence of interferences on the decision making process, whether or not the interested parties are integrated, and if there is an periodical evaluation of environmental performance and how it is handled. One also expects to identify the opportunities for improvement regarding the organization that is object of study.

Avaliação do desempenho de argamassas à base de cimento Portland para rejuntamento de placas cerâmicas tipo II com adição de pó de borracha de pneus

In this work it is assessed the performance of Portland cement-based mortar to the grouting of type II ceramic plates with the addition of unusable tire rubber powder. It is presented a bibliographical review about the subject in which is done the theoretical and methodological foundation of the whole investigative process. The analyzed universe comprises a sample of mortar to the grouting of conventional ceramic plates type II (reference sample) and five more samples to the grouting of ceramic plates type II, which were made up of the addition of unusable tire rubber powder in the respective proportion (in mass) of 4%, 8%, 12%, 16% and 20%. These mortar samples were subject to the trials of determination of the consistency index (Brazilian Standard NBR 13276:2005), water retention ( Brazilian Standard NBR 14992 Attachment B:2003), permeability in 240 minutes (Brazilian Standard NBR 14992 Attachment G:2003), absorption of water by immersion (Brazilian Standard NBR 9781:2013), resistance to compression (Brazilian Standard NBR14992 Attachment D: 2003), resistance to traction in the flexion (Brazilian Standard NBR 13279:2005), resistance of traction adherence (Brazilian Standard NBR 14081 part 4:2012) and hardened mass density (Brazilian Standard NBR 13280: 2005). It has been found out from the analyzes of the results in the trial the following situation: the reference mortar used met the established requirements in the norms of specifications corresponding to only six from the eight parameters assessed in the research; the mortar with addition of 4,0% of tire rubber powder met the established requirements corresponding to only the resistance to compression and the resistance of adherence to traction. Thus, the other kinds of mortar with addition of 8,0 %, 12,0 %, 16,0 % and 20,0 % of tire rubber powder met the requirements of specifications corresponding to only the resistance to compression and the resistance of adherence to traction. This result concludes that the adding of tire rubber powder does not grant improvement to the mortar of type II grouting to the laying of ceramic plates.

Avaliação do desempenho de argamassas à base de cimento Portland para rejuntamento de placas cerâmicas tipo II com adição de pó de borracha de pneus

In this work it is assessed the performance of Portland cement-based mortar to the grouting of type II ceramic plates with the addition of unusable tire rubber powder. It is presented a bibliographical review about the subject in which is done the theoretical and methodological foundation of the whole investigative process. The analyzed universe comprises a sample of mortar to the grouting of conventional ceramic plates type II (reference sample) and five more samples to the grouting of ceramic plates type II, which were made up of the addition of unusable tire rubber powder in the respective proportion (in mass) of 4%, 8%, 12%, 16% and 20%. These mortar samples were subject to the trials of determination of the consistency index (Brazilian Standard NBR 13276:2005), water retention ( Brazilian Standard NBR 14992 Attachment B:2003), permeability in 240 minutes (Brazilian Standard NBR 14992 Attachment G:2003), absorption of water by immersion (Brazilian Standard NBR 9781:2013), resistance to compression (Brazilian Standard NBR14992 Attachment D: 2003), resistance to traction in the flexion (Brazilian Standard NBR 13279:2005), resistance of traction adherence (Brazilian Standard NBR 14081 part 4:2012) and hardened mass density (Brazilian Standard NBR 13280: 2005). It has been found out from the analyzes of the results in the trial the following situation: the reference mortar used met the established requirements in the norms of specifications corresponding to only six from the eight parameters assessed in the research; the mortar with addition of 4,0% of tire rubber powder met the established requirements corresponding to only the resistance to compression and the resistance of adherence to traction. Thus, the other kinds of mortar with addition of 8,0 %, 12,0 %, 16,0 % and 20,0 % of tire rubber powder met the requirements of specifications corresponding to only the resistance to compression and the resistance of adherence to traction. This result concludes that the adding of tire rubber powder does not grant improvement to the mortar of type II grouting to the laying of ceramic plates.

Avaliação do desempenho da paligorsquita modificada e do carvão da pirólise do lodo de esgoto no processo de degradação fotocatalítica do fenol

The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).

Avaliação do desempenho da paligorsquita modificada e do carvão da pirólise do lodo de esgoto no processo de degradação fotocatalítica do fenol

The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).

Proposta de um sistema de avaliação de desempenho para o Restaurante Universitário da UFRN

The aim of this study was to propose a Performance Evaluation System for outsourced employees of the University Restaurant of the Federal University of Rio Grande do Norte to supply the lack of evaluative instruments. According to Provision of Services Contract nº050/2010 and nº055/2011 of FURN with SAFE LOCAÇÃO DE MÃO DE OBRA LTDA ME, it is the hired company to promote periodic functional performance evaluation of the outsourced employees, but this is not done. The performance evaluation process serves to evaluate if the employees are making their tasks according to the organizations’ objectives and goals, besides that helps to find service failures and capacity of employees demands, thus contributing to improve work conditions and the global performance of the organizations. To elaborate the proposal of evaluation, it was chosen an action research with the participation of all stakeholders, employees and managers from UR. On data collect, first, outsourced employees and management servers were interviewed, in order to raise existing perceptions about performance evaluation aspects. From these data and the work routine observation, a proposal of performance evaluation was elaborated, that was appreciated, criticized and adjusted by the actors involved (employees and managers) to the final formulation of the instrument. This study also presents the necessary steps to the implementation of the Performance Evaluation System. The proposed Performance Evaluation System can be applied to the FURN assuming this process, after modification of contract terms and the approval by the ADCON. It also can serve as an example to others units that works with the provision of outsourced services, enabling so the performance evaluation to be part of the management policy of all people working in FURN.

Proposta de método para avaliação do desempenho térmico de residências unifamiliares em clima quente e úmido

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Avaliação do desempenho do aço D6 tratado termicamente e netretado em plasma com gaiola catódica visando aplicação industrial

In this research there was an evaluation of the best conditions of nitriding in plasma within a cathodic cage at an atmosphere of 80% N2-20%H2 in samples of tool manganese steel AISI D6, cold working, treated thermally in the following conditions: tension relief, treated thermally to temperature of maximum heat, temperate heat and temperate and temperate heat. A pressure of 2.5mbar and temperatures of 400 and 300ºC com treatment time of two and three hours were used to evaluate its performance as cutting tool (punch) of bicycle backs. Hardness, micro-structural aspects (layer thickness, interface, grain size etc), and crystal phases on the surface were appraised. When treated to tension relief, thermally treated to maximum heat temperature, temperature and temperate heat, the samples presented hardness levels of 243HV, 231HV, 832HV, and 653HV, respectively. The best nitrification conditions were: four hours and 300ºC for heat samples. A superficial hardness of 1000HV and a 108µm thickness for the nitrided layer were found in these samples

Avaliação do desempenho do aço AISI D2 tratado termicamente e nitretado em plasma com gaiola catódica visando aplicação industrial

In the research, steel samples tool AISI D2, treated thermally, in the conditions: relief of tension, when maximum, seasoned and seasoned was treated thermally in the temperature of revenimento and revenida had been nitrited in plasma with cathodic cage, in atmosphere of 80%N2:20%H2. One used pressure of 2,5 mbar, 400 and 480°C temperatures with treatment time of 3 and 4 hours, with the objective to evaluate its performance in pipes cut tool. It was compared that the performance of the same steel when only thermally treated, both with tension relief. It was evaluated its hardness. Microstructural aspects (the layer thickness, interface, graisn size, etc) and crystalline phases on the surface. Besides, it was verified accomplishment possibility of nitriding simultaneous to annealing treatment. The tempering samples had presented hardness levels of 600 HV, while in nitrited samples these values had been 1100 HV

Nitretação em plasma com gaiola catódica: caracterização e avaliação do desempenho da camada nitretada em facas de corte

Nowadays, in the plastic industry are used mills that accomplish the recycling of residues generated in the production of its components. These mills contain cut sheets that suffer accelerated wear, once they are submitted constantly to the tribologic efforts, decreasing its useful life. To reduce this problem, it s used noble steels or takes place superficial treatments. The ionic nitriding process presents some limitations related to the uniformity of the layer in pieces with complex geometry, committing its application in pieces as knives, head offices, engagements, etc. However, the new technique of nitriding in cathodic cage eliminates some problems, as the restrictions rings, inherent to the conventional ionic nitriding. In present work, was studied the use viabilization of steels less noble, as SAE 1020, SAE 4320 and SAE 4340, nitreded by two different techniques, to substitute the AISI 01 steels, usually used in the cut knifes fabrication, seeking to reduce the costs and at the sane time to increase the useful life of these knifes. The steel most viable was the SAE 4340, nitrided in cathodic cage, because it presented uniformity in thickness and in the hardness of the layer, besides of increased 58% in the average its useful life

Avaliação do desempenho reprodutivo do Cavalo-Marinho Hippocampus reidi (GINSBURG 1933) do estuário do Rio Potengi (Rio Grande do Norte, Brasil) com vistas ao seu cultivo em bases sustentáveis

Os cavalos-marinhos têm cativado a imaginação e a curiosidade dos seres humanos por centenas de anos. No entanto, nos dias de hoje, esses animais correm um sério risco de extinção por fatores como a pesca desordenada para suprir os mercados de peixes ornamentais e da medicina tradicional chinesa e principalmente, a destruição do seu habitat. Nesse contexto, é crescente o número de estudos sobre a ecologia, a biologia (reprodutiva, especialmente) e o cultivo de várias espécies do gênero Hippocampus, inclusive para fins conservacionistas e de recomposição de estoques. Duas espécies de cavalos-marinhos são encontradas no Brasil: Hippocampus reidi Ginsburg 1933 e Hippocampus erectus Perry. No entanto, as informações sobre essas espécies estão basicamente restritas ao seu grau de ocorrência ou a sua área de ocupação. No presente estudo, foi avaliado o desempenho reprodutivo de Hippocampus reidi do estuário do rio Potengi (05° 47' 42'' S; 35° 12' 34'' W), em Natal, Rio Grande do Norte. Para tanto, cavalos-marinhos grávidos (n = 38) foram coletados no referido estuário nos meses de setembro, outubro e novembro de 2008 e julho, agosto, setembro e outubro de 2009 e mantidos em laboratório até que liberassem os filhotes. O comprimento padrão (CPA), altura (ATA), volume da bolsa (VB) e peso úmido (PuA) dos adultos, bem como o comprimento padrão (CPF), altura (ATF), peso úmido (PuF) e peso seco (PsF) dos filhotes foram determinados. Os resultados obtidos mostraram que houve correlações significativas entre o CPA e a ATA (r²=0,171), CPA e PuA (r²=0,624), CPA e VB (r²=0,256), ATA e PuA (r²=0,788), PuA e VB (r²=0,211), CPF e ATF (r²=0,903) e CPF e PsF (r²=0,163). A análise de correspondência (AC) que associou as classes do comprimento padrão dos adultos (CPA) e o volume da bolsa de H. reidi ao número de filhotes mostrou que animais entre 19 cm e 21 cm e com volume de bolsa entre 3 mL e 4 mL foram os que liberaram o maior número de filhotes. Os resultados do presente estudo também indicam que o tamanho mínimo de captura recomendado pela CITES (10 cm de altura) para H. reidi deve ser revisto, uma vez que não foram encontrados animais menores que 13,5 cm que estivessem grávidos. Finalmente, o número médio de filhotes por desova obtido no presente estudo (n = 775 ± 398 filhotes) realçou o potencial reprodutivo de H. reidi e a necessidade de estudos adicionais com esta espécie