Camarão Litopenaeus vannamei: componentes de importância nutricional na carne e nos resíduos do beneficiamento

Farming of marine shrimp is growing worldwide and the Litopenaeus vannamei (L. vannamei) shrimp is the species most widely cultivated. Shrimp is an attractive food for its nutritional value and sensory aspects, being essential the maintenance of this attributes throughout storage, which takes place largely under freezing. The aim of this research was to evaluate quality characteristics of Litopenaeus vannamei shrimp, during freezing storage and to verify the effect of rosemary (Rosmarinus officinalis) adding. Considering the reutilization of processing shrimp wastes, total carotenoids analysis were conducted in waste of Litopenaeus vannamei shrimp and in the flour obtained after dryer. Monthly physicochemical and sensorial analysis were carried out on shrimp stored at 28,3 ± 3,8ºC for 180 days. Samples were placed in polyethylene bags and were categorized as whole shrimp (WS), peeled shrimp (PS), and PS with 0,5% dehydrated rosemary (RS). TBARS, pH, total carotenoid and sensorial Quantitative Descriptive Analysis (QDA) were carried out. Carotenoid total analysis was conducted in fresh wastes and processed flour (0 day) and after 60, 120 and 180 days of frozen storage. After 180 days, RS had lower pH (p = 0.001) and TBARS (p = 0.001) values and higher carotenoids (p = 0.003), while WS showed higher carotenoid losses. Sensory analysis showed that WS were firmer although rancid taste and smell were perceived with greater intensity (p = 0.001). Rancid taste was detected in RS only at 120 days at significantly lower intensity (p = 0.001) than WS and PS. Fresh wastes had 42.74μg/g of total carotenoids and processed flour 98.51μg/g. After 180 days of frozen storage, total carotenoids were significantly lower than 0 day (p<0,05). The addition of rosemary can improve sensory quality of frozen shrimp and reduce nutritional losses during storage. Shrimp wastes and flour of L. vannamei shrimp showed considerable astaxanthin content however, during storage it was observed losses in this pigment

Tradução, adaptação cultural e análise das propriedades psicométricas do activities of daily living questionnaire - ADLQ - para avaliação funcional de pacientes com a doença de alzheimer

O Activities daily living questionnaire - ADLQ foi elaborado para avaliar atividades básicas e instrumentais em pacientes com a doença de Alzheimer. O objetivo principal deste estudo consistiu em realizar a tradução do ADLQ para a língua portuguesa, adaptação transcultural e análise das suas propriedades psicométricas. A amostra foi composta por 60 pacientes e os respectivos 60 cuidadores. O estudo iniciou-se com a tradução do instrumento pela técnica de retrotradução associada ao método bilíngüe. A versão traduzida foi respondida pelo cuidador e o Mini Exame do Estado Mental (MEEM) aplicado ao paciente. A análise psicométrica foi realizada através da validade das medidas do instrumento. Os resultados verificaram uma correlação inversamente significativa (r=-0,793;p<0,05) entre os instrumentos avaliados, com uma explicação da variância total de 62%. A coerência interna do instrumento foi realizada através da correlação com os resultados do MEEM sugerindo uma versão condensada do ADLQ. Avaliando-se através do teste t para amostras correlacionadas, as médias do ADLQ-versão traduzida e versão condensada não apresentaram diferenças significativas, demonstrado assim que a simplificação do instrumento não alterou os valores do nível de dependência funcional observados. A análise fatorial realizada através da rotação Varimax indicou seis dimensões. Atividades como; comer, vestir-se, banho, necessidades fisiológicas, tomar comprimidos, participação em grupos, administrar finanças, manusear dinheiro, locomover pela vizinhança, usar telefone, compreensão, dentre outras, são os mais importantes preditores da capacidade funcional, no grupo estudado. Atividades com desempenho pouco comum a ambos os sexos, e no desempenho de papéis sociais enquanto gênero na sociedade brasileira (afazeres domésticos, consertos e manutenção em casa), na amostra estudada, não demonstraram ter importância na determinação da capacidade funcional com o paciente com a Doença de Alzheimer. O presente estudo disponibiliza uma nova ferramenta de avaliação funcional, visando contribuir para a mensuração mais cuidadosa do estado funcional do paciente por todos os profissionais da área da saúde

Estudo psicossocial das perdas dentárias na terceira idade

The present study seeks to understand tooth loss by investigating the social representations in the daily life of elderly individuals, thus characterizing itself as a comparative and analytic research. It is known that tooth loss is a common occurrence in elderly individuals, interfering at the psychosocial and biological levels, through its functional, esthetical and social implications. The area of oral health in Brazil is lacking studies on this topic, especially with respect to the psychosocial aspects of the elderly. The Theory of Social Representations and the Central Nucleus Theory were selected for theoretical-methodological support. The Free Association of Words Test was used, whose inducing stimulus were the words tooth loss , in which each subject was asked to associate 3 words, to respond to a questionnaire related to socio-economic conditions and containing an investigation of tooth loss, access to odontological services and the need for dental treatment, and to undergo a focus group interview. The study sample consisted of 120 individuals 60 years of age or over, resident in Natal, RN, Brazil and participants of the Live Together to Live Better group of the Basic Health Unit of Felipe Camarão Residential District and Unati (Open University of the Elderly); an interview was performed with 36 subjects. Data analysis was performed by Evoc 2000, SPSS/99, Graph Pad and Alceste softwares. The results demonstrate that the central nucleus of the social representations of tooth loss for the Live Together group emerged from the difficulty in eating categories, showing a relation between physiologic necessity, desire and pleasure from eating, not to mention the pain that resulted from justifying the tooth loss. Besides the central discourses, the following peripheral elements were gathered: difficulty in adapting to the prosthesis, treatment and difficulty in speaking. All of these categories, except the last, also comprised the class themes of the group interview. For the Unati group the central nucleus emerged from the socio-economic difficulties categories, demonstrating a narrow relation between poverty, access to health and education and esthetics, confirming in the discourse of common sense, the association between tooth loss and aging. At the margin of the central discourses was collected the peripheral element difficulty in adapting to the prosthesis, found both in the Live Together and Unati groups, which expresses the resistance of the subject to this new situation and the failure of the rehabilitation treatment in the sense of reviving the memory of their natural teeth. All of these categories also constitute the class themes of the of the group interview. Thus, through the study of the social representations, we can reveal a reality in the perspective of the social subjects, contemplating the multiple facets of the social-cultural reality experienced by these individuals

Influência do hipoestrogenismo por ooforectomia na adaptação antioxidante em ratas wistar exercitadas regularmente

Post-menopause is a period of women s life cycle that is characterized by estrogen depletion and therefore increasing cardiovascular diseases, neurodegenerative disorders, urogenital atrophy, osteoporosis, hot flushes and sexual discomfort incidences. Estrogen is a hormone with comfirmed antioxidant action and its depletion is related to oxidative stress instalation and damaging various important biomolecules. Regular physical activity has been identified as a factor involved in reducing women s post-menopausal complications in addition to improving antioxidant defense by reducing the oxidative damage and consequently improving life s quality in this part of the population. This study aims to evaluate the influence of hypoestrogenism in antioxidant adaptation due to regular exercise, by determining reduced glutathione (GSH) and Thiobarbituric Acid Reactive Substances (SRAT) concentrations and antioxidant enzymes glutathione peroxidase (GPx), Superoxide Dismutase (SOD) and Catalase (CAT) activities in blood, brain and liver of rats. To achieve this goal we used 50 Wistar rats, weighing 180-250g which were divided into two groups, control - GC (25) and ooforectomized - GO (25). Each group was subdivided into five subgroups: Not-trained - S (5), Not-trained Acute Exercise - SEA (5), regular exercise 30 days - E30 (5), regular exercise 60 days - E60 (5) and regular exercise 90 days - E90 (5). Each of the three subgroups exercised regularly was subjected to acute exercise on the eve and the day of sacrifice to collect biological samples of blood, liver and brain and subsequent determination of SRAT concentration, GSH content and antioxidant enzymes GPx, SOD and CAT activities. The results indicated that the sedentary animals acutely exercised presented oxidative stress and regular physical activity led to antioxidant adaptation. In ooforectomized group the antioxidant adaptation seen in control animals showed to be impaired. Unlike the results from blood and liver, in brain there was a shield against oxidative damage originated by the exercise and that hypoestrogenism led to a loss of this natural antioxidant potential. Therefore, hypoestrogenism interferes negatively in antioxidant adaptation due to regular exercise

Itinerário educacional de uma aluna cega e a busca pela imagem adaptada

The scope of this study directs an investigation in search of how the blind person learns knowledge at school mediated by the image in context of an inclusive education and how it can be (or is) triggered by the adaptation of images to the tactile seizure of the blind person and his correlative process of reading. To achieve this intent we choose a qualitative approach of research and opted for the modality of case study, based on the empirical field of a public school in the city of Cruzeta, RN and as a the main subject a congenitally blind female student enrolled in high school there, focusing, often, on the discipline of geography in its words mapping. Our procedures for construction of data are directly involved to the documentary analysis of open reflective interview and observation. The base guiding theory of our assessments is located in the current understanding about the human psychological development of its educational process inside an inclusive perspective, of contemporary conceptions about the visual disability as well of image as a cultural product. Accordingly, the human person is a concrete subject, whose development is deeply marked by the culture, historically built by human society. This subject regardless of his specific features, grasping the world in an interactive and immediate way, internalising and producing culture. In this thinking, we believe that the blind person perceives in multiple senses the stimuli of his environment and acts in the world toward his integration into the social environment. The image as a product of culture, historically and socially determined, appears as a sign conventionally used as an icon that in itself concentrates knowledge of which the student who does not realize visually himself and his surroundings cannot be excluded. In this direction, the inclusive educational process must build conditions of access to knowledge for all students without distinction, including access to the interpretation of the images originally intended for the seizure strictly visual to other perceptive models. Based in this theory and adopting principles of content analysis, we circulated inside the interpretation of the data constructed from the analysis of documents, from the subject speeches, from records of the observation made in the classroom and other notes of the field daily. In the search for pictures on the school contents, adapted to the tactile seizure of blind student, was seen little and not systematic in practice and teaching at the school. It showed us the itinerary of the student life marked by a succession of supports, most of the time inappropriate and pioneers in cooling the construction of her autonomy. It also showed us the tensions and contradictions of a school environment, supposedly inclusive, that stumbles in search of its intent, in the attitudinal and cumulative barriers brought, because of its aggravating maintenance. These findings arose of crossing data around of a categorization that gives importance to 1) Concepts regarding the school inclusion, 2) Elements of the school organization, educational proposal and teaching practice, 3) Meaning of the visual image as the object of knowledge, 4) Perception in multiple senses and 5) Development and learning of the blind person before impositions of the social environment. In light of these findings we infer that it must be guaranteed to the disabled person removal of the attitudinal barriers that are against his full development and the construction of his autonomy. In that sense, should be given opportunity to the student with visual disability, similarly to all students, not only access to school, but also the dynamics of a school life efficient, that means the seizure of knowledge in all its modalities, including the imagery. To that end, there is a need of the continued training of teachers, construction of a support network in response to all needs of students, and the opportunity to development of reading skills beyond a perspective eminently focused in the sight

A aplicação dos temas transversais nas aulas de educação física - ensino médio integrado

A escola tem se guiado por ações pedagógicas do professor consideravelmente limitadas, as quais têm dificultado configurar com nitidez intenções educativas que contemplam a sua organização curricular. Nesse sentido, esta dissertação tem por objetivo apresentar uma experiência pedagógica da educação física a partir da operacionalização de temas transversais com os conteúdos curriculares no ensino médio integrado no IFRN, campus SGA. Os fundamentos teórico-metodológicos seguiram a linha qualitativa da pesquisa-ação. Participaram desta pesquisa estudantes dos cursos de Edificações e Informática do 1º ano do ensino médio integrado e a professora-pesquisadora, que é servidora efetiva do instituto. Optando pela pesquisa-ação, estruturamos uma intervenção pedagógica com intenção de promover a construção de conhecimento dos conteúdos da educação física com os temas transversais, tanto em amplitude como em profundidade, alicerçada no aporte teórico da teoria da ação dialógica (FREIRE, 2011) e da concepção aberta no ensino da educação física (HILDEBRANDT, 1986). A pesquisa teve como procedimentos a observação participante e a filmagem das aulas de educação física. As observações e os discursos dos estudantes foram organizados em categorias de questões, a saber: 1. Percepção dos estudantes sobre a educação física; 2. Sentidos e significados dos conteúdos da educação física na interfase com os temas transversais nas aulas; 3. Diálogos sobre a interação do conhecimento na relação professor-estudante. As observações e a análise dos depoimentos dos estudantes apontaram, em alguns momentos, que as aulas de educação física ainda são estruturadas no modelo rola bola , sem planejamento, configurando-se mera atividade, e não como prática pedagógica que trata dos saberes do campo da cultura de movimento. Por não constituir-se prática pedagógica que aborda os conteúdos de forma sistematizada, não se tem de forma precisa a ordenação e sequenciação dos aprendizados de práticas corporais, tampouco a introdução de temas transversais, os quais não poderiam ser aprendidos sem uma ação pedagógica concreta do professor. A interação professor-estudante afetiva e dialógica favoreceu que os estudantes se permitissem participar das experiências corporais de um jeito diferente, aceitando aprender os conteúdos curriculares em conjunto com os temas transversais, passando a perceber as aulas de educação física como espaços de experiências de movimento que lhes permitiram atribuir sentido/significado, além do conhecimento sobre o universo da cultura de movimento. A nosso ver, acrescentamos também que a escola não valorizou o trabalho com os temas transversais, pois a recente discussão sobre a inserção desses temas como temáticas relevantes, que devem ser tratadas pedagogicamente em conjunto nos componentes curriculares, ainda não é contemplada expressivamente no projeto curricular da escola

Diagnósticos de enfermagem em pacientes submetidos à hemodiálise: semelhanças entre o modelo de adaptação e a NANDA internacional

The nurses in the hemodialysis has an important role in the nursing process implementation, in the context of a theoretical referential. Among the nursing theories, highlights the Roy´s adaptations model, who considers a person as an holistic adaptive system that aims to adapt customers to different living conditions. Thus, it is believed that the Roy´s nursing process will guide nursing care to patients on dialysis. Therefore, the study aimed to analyze the nursing diagnosis present in patients with chronic kidney disease on hemodialysis based on the theoretical model of Roy and NANDA-International. Descriptive and cros-sectional study, performed at a dialysis center in a city in northeastern Brazil. Sample of 178 patients and consecutive sampling by convenience. Data collection ocurred from October/2011 until February/2012, through interview and physical examination forms. Data analysis was initiated by clinical reasoning, diagnosis judgment and similarity relation. Then, the data were entered into SPSS program, 16.0 version, generating descriptive statistics. The project was approved by the Ethics Research Committee (protocol nº 115/11) with a Presentation Certificate for Ethics Appreciation (in 0139.0.051.000-111) and was funded by the Universal edict MCT / CNPq 14/2010. The results revealed that most patients were male (52.2%), married (62.9%) and residents in the Natal´s metropolitan region (54.5%). The mean age was 46.6 years and the years of study, 8,5. Regarding nursing diagnosis obtained an average of 6.6, especially: Risk of Infection (100%), excessive fluid volume (99.4%) and hypothermia (61.8%). On the other hand the adaptive problems average was 6.4, and the most common: intracellular fluid retention (99.4%); Hyperkalemia (64.6%); Hypothermia (61.8%) and edema (53.9%). Were established 20 similarity relations between the NANDA-International nursing diagnosis and adaptive problems of Roy, namely: risk of falls / injury risk and potential for injury, impaired physical mobility and walking mobility and / or restricted coordination, dressing self-care deficit and loss of self-care ability; hypothermia and hypothermia; impaired skin integrity and impaired skin integrity; excessive fluid volume and intracellular fluid retention / Hyperkalemia / Hypocalcemia / edema; imbalanced nutrition: less than body requirements and Nutrition less than the body's needs; constipation and constipation, acute pain and acute pain, chronic pain and chronic pain, sensorial perception disturbed: visual, tactile and auditory disabilities and a primary sense: sight, hearing and tactile; sleep deprivation and insomnia, fatigue and intolerance to activities; ineffective self health and fails in the role; sexual dysfunction and sexual dysfunction; situational low self-esteem and low self-esteem, and diarrhea and diarrhea. We conclude that there is similarity between the typologies and was required a model´s analysis, because they present different ways to establish the nursing diagnosis. Moreover, the nursing process use, under the context of a theory and a classification system, subsidizes the care and contributes to the strengthening of nursing science

Estudo de estratégias de otimização para poços de petróleo com elevação por bombeio de cavidades progressivas

The progressing cavity pump artificial lift system, PCP, is a main lift system used in oil production industry. As this artificial lift application grows the knowledge of it s dynamics behavior, the application of automatic control and the developing of equipment selection design specialist systems are more useful. This work presents tools for dynamic analysis, control technics and a specialist system for selecting lift equipments for this artificial lift technology. The PCP artificial lift system consists of a progressing cavity pump installed downhole in the production tubing edge. The pump consists of two parts, a stator and a rotor, and is set in motion by the rotation of the rotor transmitted through a rod string installed in the tubing. The surface equipment generates and transmits the rotation to the rod string. First, is presented the developing of a complete mathematical dynamic model of PCP system. This model is simplified for use in several conditions, including steady state for sizing PCP equipments, like pump, rod string and drive head. This model is used to implement a computer simulator able to help in system analysis and to operates as a well with a controller and allows testing and developing of control algorithms. The next developing applies control technics to PCP system to optimize pumping velocity to achieve productivity and durability of downhole components. The mathematical model is linearized to apply conventional control technics including observability and controllability of the system and develop design rules for PI controller. Stability conditions are stated for operation point of the system. A fuzzy rule-based control system are developed from a PI controller using a inference machine based on Mandami operators. The fuzzy logic is applied to develop a specialist system that selects PCP equipments too. The developed technics to simulate and the linearized model was used in an actual well where a control system is installed. This control system consists of a pump intake pressure sensor, an industrial controller and a variable speed drive. The PI control was applied and fuzzy controller was applied to optimize simulated and actual well operation and the results was compared. The simulated and actual open loop response was compared to validate simulation. A case study was accomplished to validate equipment selection specialist system

Metodologia para adaptação de microarquiteturas microprogramadas soft-core à uma ISA padrão: estudo do impacto sobre a complexidade de hardware para o padrão MIPS

In academia, it is common to create didactic processors, facing practical disciplines in the area of Hardware Computer and can be used as subjects in software platforms, operating systems and compilers. Often, these processors are described without ISA standard, which requires the creation of compilers and other basic software to provide the hardware / software interface and hinder their integration with other processors and devices. Using reconfigurable devices described in a HDL language allows the creation or modification of any microarchitecture component, leading to alteration of the functional units of data path processor as well as the state machine that implements the control unit even as new needs arise. In particular, processors RISP enable modification of machine instructions, allowing entering or modifying instructions, and may even adapt to a new architecture. This work, as the object of study addressing educational soft-core processors described in VHDL, from a proposed methodology and its application on two processors with different complexity levels, shows that it s possible to tailor processors for a standard ISA without causing an increase in the level hardware complexity, ie without significant increase in chip area, while its level of performance in the application execution remains unchanged or is enhanced. The implementations also allow us to say that besides being possible to replace the architecture of a processor without changing its organization, RISP processor can switch between different instruction sets, which can be expanded to toggle between different ISAs, allowing a single processor become adaptive hybrid architecture, which can be used in embedded systems and heterogeneous multiprocessor environments

Sistema Híbrido de Inferência Baseado em Análise de Componentes Principais e Redes Neurais Artificiais Aplicado a Plantas de Processamento de Gás Natural

Nowadays, where the market competition requires products with better quality and a constant search for cost savings and a better use of raw materials, the research for more efficient control strategies becomes vital. In Natural Gas Processin Units (NGPUs), as in the most chemical processes, the quality control is accomplished through their products composition. However, the chemical composition analysis has a long measurement time, even when performed by instruments such as gas chromatographs. This fact hinders the development of control strategies to provide a better process yield. The natural gas processing is one of the most important activities in the petroleum industry. The main economic product of a NGPU is the liquefied petroleum gas (LPG). The LPG is ideally composed by propane and butane, however, in practice, its composition has some contaminants, such as ethane and pentane. In this work is proposed an inferential system using neural networks to estimate the ethane and pentane mole fractions in LPG and the propane mole fraction in residual gas. The goal is to provide the values of these estimated variables in every minute using a single multilayer neural network, making it possibly to apply inferential control techniques in order to monitor the LPG quality and to reduce the propane loss in the process. To develop this work a NGPU was simulated in HYSYS R software, composed by two distillation collumns: deethanizer and debutanizer. The inference is performed through the process variables of the PID controllers present in the instrumentation of these columns. To reduce the complexity of the inferential neural network is used the statistical technique of principal component analysis to decrease the number of network inputs, thus forming a hybrid inferential system. It is also proposed in this work a simple strategy to correct the inferential system in real-time, based on measurements of the chromatographs which may exist in process under study

Uma implementação da análise de componentes independentes em plataforma de hardware reconfigurável

Blind Source Separation (BSS) refers to the problem of estimate original signals from observed linear mixtures with no knowledge about the sources or the mixing process. Independent Component Analysis (ICA) is a technique mainly applied to BSS problem and from the algorithms that implement this technique, FastICA is a high performance iterative algorithm of low computacional cost that uses nongaussianity measures based on high order statistics to estimate the original sources. The great number of applications where ICA has been found useful reects the need of the implementation of this technique in hardware and the natural paralelism of FastICA favors the implementation of this algorithm on digital hardware. This work proposes the implementation of FastICA on a reconfigurable hardware platform for the viability of it's use in blind source separation problems, more specifically in a hardware prototype embedded in a Field Programmable Gate Array (FPGA) board for the monitoring of beds in hospital environments. The implementations will be carried out by Simulink models and it's synthesizing will be done through the DSP Builder software from Altera Corporation.

Projeto e Implementação em Ambiente Foundation Fieldbus de Filtragem Estocástica Baseada em Análise de Componentes Independentes (M175)

This work considers the development of a filtering system composed of an intelligent algorithm, that separates information and noise coming from sensors interconnected by Foundation Fieldbus (FF) network. The algorithm implementation will be made through FF standard function blocks, with on-line training through OPC (OLE for Process Control), and embedded technology in a DSP (Digital Signal Processor) that interacts with the fieldbus devices. The technique ICA (Independent Component Analysis), that explores the possibility of separating mixed signals based on the fact that they are statistically independent, was chosen to this Blind Source Separation (BSS) process. The algorithm and its implementations will be Presented, as well as the results

Protótipo de uma unidade com tri-geração de energia para utilizações remotas: aplicação de módulo secondutivo gerador termoelétrico

The generation for termoeletricity is characterized as a solid process of conversion of thermal energy (heat) in electric without the necessity of mobile parts. Although the conversion process is of low efficiency the system presents high degree of trustworthiness and low requisite of maintenance and durability. Its principle is based on the studies of termogeneration carried through by Thomas Seebeck in 1800. The frank development of the technologies of solid state for termoeletricity generation, the necessity of the best exploitation of the energy, also with incentive the cogeneration processes, the reduction of the ambient impact allies to the development of modules semiconductors of high efficiency, converge to the use of the thermoeletric generation through components of solid state in remote applications. The work presents the development, construction and performance evaluation of an prototype, in pilot scale, for energy tri-generation aiming at application in remote areas. The unit is composed of a gas lamp as primary source of energy, a module commercial semiconductor for thermoelectric generation and a shirt for production of the luminosity. The project of the device made compatible a headstock for adaptation in the gas lamp, a hot source for adaptation of the module, an exchanger of to be used heat as cold source and to compose first stage of cogeneration, an exchanger of tubular heat to compose second stage of cogeneration, the elaboration of a converter dc-dc type push pull, adequacy of a system of acquisition of temperature. It was become fullfilled assembly of the prototype in group of benches for tests and assay in the full load condition in order to evaluate its efficiency, had been carried through energy balance of the unit. The prototype presented an electric efficiency of 0,73%, thermal of 56,55%, illumination of 1,35% and global of 58,62%. The developed prototype, as the adopted methodology of assay had also taken care of to the considered objectives, making possible the attainment of conclusive results concerning to the experiment. Optimization in the system of setting of the semicondutor module, improvement in the thermal insulation and design of the prototype and system of protection to the user are suggestions to become it a commercial product

Adaptação de um sistema automatizado para medição de microdureza

The hardness test is thoroughly used in research and evaluation of materials for quality control. However, this test results are subject to uncertainties caused by the process operator in the moment of the mensuration impression diagonals make by the indenter in the sample. With this mind, an automated equipment of hardness mensuration was developed. The hardness value was obtained starting from the mensuration of plastic deformation suffered by the material to a well-known load. The material deformation was calculated through the mensuration of the difference between the progress and retreat of a diamond indenter on the used sample. It was not necessary, therefore, the manual mensuration of the diagonals, decreasing the mistake source caused by the operator. Tension graphs of versus deformation could be analyzed from data obtained by the accomplished analysis, as well as you became possible a complete observation of the whole process. Following, the hardness results calculated by the experimental apparatus were compared with the results calculated by a commercial microhardness machine with the intention of testing its efficiency. All things considered, it became possible the materials hardness mensuration through an automated method, which minimized the mistakes caused by the operator and increased the analysis reliability

Adaptação eletrônica de um leitor mecânico de coto, investigação e desenvolvimento de interface CAD

Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.