Projeto e Operação em Escala Semi-Industrial de um Equipamento para Tratamento de Águas Produzidas na Indústria do Petróleo Utilizando Nova Tecnologia: misturador-decantador à inversão de fases - MDIF

The aim of this work is to use a new technology in the treatment of produced wastewaters from oil industry. An unit for treat produced waters called UTMDIF, was designed, installed and operated in an industrial plant for treatment of effluents from oil industry. This unit operates by means of the method of separation of phase inversion and can become a promising alternative to solve the problem of oil/water separation. This method constitutes the basis of the working of a new design of mixersettler of vertical configuration which occupies small surface area. The last characteristic becomes specially important when there is limitation on the lay-out of the plant, for example, over maritime platforms to explore oil. This equipment in a semi-industrial scale treats produced wastewaters contaminated with oil at low concentrations (ranging from 30 to 150 mg/L) and throughputs of 320 m3/d (47,4 m3 m-2 h-1). Good results were obtained in oil/water separation which leads to the necessary specification to discharge those wastewaters. Besides, the non dependence of the efficiency of separation in spite of the salinity of the medium becomes the equipment an attractive new technology to treat wastewaters containing oil at low concentrations

Viabilidade técnica de uma rota não convencional para a produção de leite de cabra em pó em cooperativas do Rio Grande do Norte

Nowadays, Brazil has both the greatest goat herd and the greatest goat milk production of South America. The state of Rio Grande do Norte, located in northeast of Brazil, has an average year production of three thousand cubic meters of goat milk in natura. Part of this milk production is homemade and it comes from small farms, which unite in rural cooperatives created to encourage the production and implementation of industrial processes for preservation and processing of milk. Results presented by literature and obtained from preliminary essays in this thesis show that non conventional dryer of spouted bed with inert particles is able to produce powder milk from in natura milk (cattle or goat), with the same quality of spray dryer, however, operating at low cost. The method of drying in spouted bed consists of injecting milk emulsion on the bed of inert particles gushed by hot air. This emulsion covers the particles with a thin film, which dries and is reduced to powder during the circulation of inerts inside the bed. The powder is dragged by exhaustion air and separated in the cyclone. The friction among particles resulted from the particles circulation, encourages high taxes of shear in the thin film of emulsion, breaking the cohesive forces and making this process possible. Studying the drying process and the powder goat milk production in one unit of spouted bed with inert particles, seeing the development of a low cost technological route for powder milk production is the aim of this thesis. The powder milk produced by this route must attend the local demand of food industries which need an intermediate product to be used as a food ingredient (ice-cream, milk candy). In order to reach this aim, this thesis approaches the aspects related to physical, thermodynamics and physic-chemicals characteristics of goat milk, whose complete data are still inexistent in the literature. The properties of materials are of great importance to the project of any process which involves the operations of transportation of movement, heat and mass quantity, such as the dryers which operate in fluid dynamically active regime, like the spouted bed. It was obtained new data related to the goat milk properties in function of concentration of solids and temperature. It is also important to mention the study developed about the kinetic of solids retention in the bed of inert particles during the drying of goat milk. It was found more adequate processes conditions to the proposed technological route to be implemented in small and micro-industries, with simplifications in the system of milk injection as well as in the form of operation of the dryer. Important data were obtained for a posterior stage of this research which involves the v modeling, simulation, control and optimization of the process. The results obtained in this thesis, in relation to process performance as well as to the quality of produced powder milk validate the proposal of using the spouted bed dryer in the production of powder goat milk

Avaliação da eficácia de selante ionomérico modificado por resina e escovação dentária na preservação de cárie oclusal

The purpose of this study was to evaluate the effectiveness during a twelve-month period, of resin-modified glass ionomer (Vitremer@) used as fissure sealants compared to supervised teeth brushing in the prevention of oclusal caries in permarient molars of pubIlc school children from 5 to 7 years of age. A total of 91 children participated in the study, being randomly divided up into three groups of investigation: group with sealant (n=31), group of supervised brushing (m=30), and control gorup (n=30). After 12 months, a total of 28.5% of tosses in the sample of 26 children was registered, and although there wasn t a significant diference between these losses and the groups studles (p = 0.6355), there was a considerable reduction in the sample. The results showed that none of the independentIy studied variables (present caries experience, biofilm, bleeding, sealant retention, position of the tooth in the arch, and sex) interfered in the final results, and that there was no significant difference between applying the sealant in question, perfornling supervised dental brushing, or not intervening at alI (p=0.542). These results could have been a consequence of the limitations found alI through the study, especially relating to the losses occurred because of school evasion, transfer, or because of the accident in the Marise Paiva Municipal School, Keeping students away for approximately one semester, so tht a new reseach had to be developed sos as to better clarify the effects among the treatments done there

Análise da degradação ambiental das áreas de preservação permanente localizadas no estuário do rio Ceará-mirim/RN

The purpose of this paper is to identify and analyze the main environmental impacts taking place in the permanent preservation areas located in the Ceará-Mirim River estuary/RN and its surrounding areas. For that, the study was divided in two chapters, structured in the shape of a scientific paper. The first is a theoretical proposition on the occupation of the APPs in light of the discussion of the geographic space and the sustainability of the development, where a bibliographical review was made emphasizing the production of the geographic space, the sustainability of the development and the permanent preservation areas. In the second chapter, from a systemic approach, geoprocessing techniques and the adaptation of the Pressure-State- Response Indicators System were used, the latter being developed by the Organization for Economic Co-operation and Development OECD. Therefore, from the methodological approaches used, it's been observed that the use of permanent preservation areas for purposes other than those determined in the legislation and, mainly guided by capitalist interests, leads to the environmental degradation of these areas, fact which has been confirmed in the empiric study conducted in the second chapter, where it was possible to identify a series of environmental impacts such as: deforestation of mangrove and riparian vegetation for carciniculture implantation, the devastation of dune areas caused by the urban expansion in the coastal stretch and siltation of fluvial channel

Protozoários de vida livre em dois trechos da bacia hidrográfica do rio pirangi (RN): relações com a educação em ciências e preservação

The vast hidric wealth of Brazil gets its watersheds more susceptible to impacts that compromise the water quality, affecting the ecosystem stability of aquatic environments. The decrease in the quality of water resources also results in a decrease of its multiple uses, especially in tourist areas of the coast, where the continuous flow of people to these sites increases even further the probability of inappropriate behavior of both tourists and local residents. Studies regarding the microbiological communities are still scarce, especially on the free-living protozoa that play unique roles in the food chain of aquatic ecosystems. Due to the large role played by this group of microorganisms in aquatic environments, the present study aimed at identifying the genus and species of free-living protozoa present in two sections of the Pium River, east coast of Rio Grande do Norte, making an association between the its occurrence and trophic conditions of the environment in which they are, also checking the bioindicator capacity of these organisms in water quality. It also aimed to conduct a survey with students to identify the main difficulties regarding the knowledge of free-living protozoa and hydric transmission diseases in two public schools near the river studied in the Pium district, county of Parnamirim. The survey was analyzed by means of questionnaires at both schools. Students identified several activities developed Pium river, highlighting its multifunctionality and importance to the region. A total of 76 taxa of free-living protozoa was recorded, of these, 33 were ciliates, 19 flagellates and 24 sarcodia. The spatial and temporal patterns of these organisms to both points studied revealed the bioindicator potentiality of some effective species identified. However, knowledge about the free-living protozoa proved quite lagged, presenting misconceptions that show them as pathogenic organisms exclusively, totally disregarding their ecological role. In order to remedy the flaws existing in students in relation to the functional role of protozoa, workshops were planned on these microorganisms while also addressing issues related to hydric transmission diseases through lectures, recreational activities and interactive presentations. These practical activities of Science Education had the goal of bringing students the context of local water resources, aiming to promote a greater clarification regarding of the functional role of free-living protozoa in aquatic environments

Estratégias de Produção in vitro de Bioinseticida Viral: influências do Isolado, da Cinética e do Modo de operação

Societal concerns about environmental sustainability has lead to the development of ecologically-friendly alternatives to chemical insecticides for crop protection. One such alternative is biological pest control. In particular, baculoviruses are well suited as insect biopesticides due to their narrow host specificity and relative ease of propagation. In Brazil, the baculovirus Anticarsia gemmatalis nucleopolyhedrovirus (AgMNPV) is the main biological control agent employed for the soybean pest, Anticarsia gemmatalis. This baculovirus biopesticide is currently produced using caterpillars, but increasing market demand for the product has encouraged the development of an in vitro manufacturing process, which can be scaled up to much higher virus productivities. In this study, three wild-type AgMNPV isolates (AgMNPV-2D, AgMNPV-MP2 and AgMNPV-MP5) and a recombinant form (vAgEGT-LacZ) were characterised in terms of occlusion body (OB) production and infection kinetics, to enable future optimisation of the in vitro production process. These viruses were propagated using a Spodoptera frugiperda (IPLB-SF21) insect cell line grown in shaker-flask batch cultures. Among the virus isolates tested, AgMNPV-MP5 was found to be the best producer, yielding (5.3±0.85)x108 OB/mL after 8 days post infection. The characterisation of vAgEGT-LacZ propagation in suspension cell cultures has not been previously reported in the literature; hence it became the main focus for this thesis. In particular, it was carried out a study on the effect of the multiplicity of infection (MOI) on OB production. Five successive batches were performed getting a final production (8.9±1.42)x1014 occlusion bodies, considering that production is related for a bioreactor with final volume of 10m3. A low MOI associated with a fed-batch process for vAgEGT-LacZ production was found to support a 3-fold higher OB yield when compared to the default batch process (1.8x107 and 5.3x107 OB/mL, respectively). This yield is competitive with regards to the production process.