453 resultados para CNPQ::CIENCIAS AGRARIAS::CIENCIA E TECNOLOGIA DE ALIMENTOS
Resumo:
Intensive use of machinery and engines burning fuel dumps into the atmosphere huge amounts of carbon dioxide (CO2), causing the intensification of the greenhouse effect. Climate changes that are occurring in the world are directly related to emissions of greenhouse gases, mainly CO2, gases, mainly due to the excessive use of fossil fuels. The search for new technologies to minimize the environmental impacts of this phenomenon has been investigated. Sequestration of CO2 is one of the alternatives that can help minimize greenhouse gas emissions. The CO2 can be captured by the post-combustion technology, by adsorption using adsorbents selective for this purpose. With this objective, were synthesized by hydrothermal method at 100 °C, the type mesoporous materials MCM - 41 and SBA-15. After the synthesis, the materials were submitted to a calcination step and subsequently functionalized with different amines (APTES, MEA, DEA and PEI) through reflux method. The samples functionalized with amines were tested for adsorption of CO2 in order to evaluate their adsorption capacities as well, were subjected to various analyzes of characterization in order to assess the efficiency of the method used for functionalization with amines. The physic-chemical techniques were used: X- ray diffraction (XRD), nitrogen adsorption and desorption (BET/BJH), scanning electron microscopy (SEM), transmission electron microscopy (TEM), CNH Analysis, Thermogravimetry (TG/DTG) and photoelectron spectroscopy X-ray (XPS). The CO2 adsorption experiments were carried out under the following conditions: 100 mg of adsorbent, at 25 °C under a flow of 100 ml/min of CO2, atmospheric pressure and the adsorption variation in time 10-210 min. The X-ray diffraction with the transmission electron micrographs for the samples synthesized and functionalized, MCM-41 and SBA-15 showed characteristic peaks of hexagonal mesoporous structure formation, showing the structure thereof was obtained. The method used was efficient reflux according to XPS and elemental analysis, which showed the presence of amines in the starting materials. The functionalized SBA -15 samples were those that had potential as best adsorbent for CO2 capture when compared with samples of MCM-41, obtaining the maximum adsorption capacity for SBA-15-P sample
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology
Resumo:
Instruments are used in odontology to measure the Quality of Life Related to Oral Health (OHRQoL) to scale how the oral condition interferes with functional areas, of the people s psychological and social life. This cross-sectional study, held in Natal/RN, with 215 students from the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) has investigated the association between the performance of daily activities and oral health status of school adolescents from 15 to 19 years of age, through the normative index DMFT (permanent teeth decayed, missing and filled), CPI (Community Periodontal Index) and DAI (dental Aesthetic Index) and subjective questionnaire assessment of quality of life related oral health OIDP index (oral impacts on daily performance). It was also carried out the socioeconomic characteristics of students through IFRN own data. Concerning the analysis of data was performed a descriptive analysis of the variables by their absolute and relative frequencies and measures of central tendency. The chi-square test was used to assess the association between the dependent variable and the independent categorical variables and the Student t test for quantitative. It was also conducted a further multiple analysis out using Poisson regression with robust variance between the outcome "presence of impact" and the independent variables that showed p <0.20. It was used for all the statistical tests a significance level of 5%. Among the adolescents surveyed, 51.16% reported that at least one activity assessed by OIDP had hampered its implementation due to some dental problem. The difficulties were more pronounced in the activities of eating (31.6%), oral hygiene (25.6%) and smile (25.1%).The tooth position, followed by toothache, were the causes of the impacts reported by most teenagers. There was a significant association between the presence and impact of the presence of one or more decayed teeth (p = 0.012), the presence of gum bleeding (p = 0.012) and for orthodontic treatment (p = 0.003), independently of other variables. There was no significant association between oral health status and socioeconomic and demographic characteristics of the adolescents. The survey results showed that there is an association between oral health status of the population studied and reports of difficulties in carrying out daily activities evaluated. The worse the oral health status, the greater the impact of this condition on the adolescents quality of life
Resumo:
Urinary incontinence (UI) is a geriatric syndrome that is especially prevalent in institutionalized individuals, and that causes economic and social impacts derived from treatment costs and overload of caregiver. UI also entails physical consequences to the health of the elderly, such as urinary tract infections or pressure ulcers, among other health problems. However, the existing national research on this condition is still scarce and comprises serious methodological biases. Therefore, the objective of this study is to determine the prevalence of urinary incontinence and associated factors in institutionalized elderly. A cross-sectional study is presented herein, conducted between October and December, 2013 and carried out in 10 nursing homes in the city of Natal (Northeast Brazil). UI was verified through the program Minimum Data Set version 3.0, which was also used to assess fecal incontinence, urinary devices and UI control programs. Data collection included sociodemographic information, UI characterization, as well as variables related to the institution itself and to health conditions (comorbidities, medication, pelvic floor surgery, Barthel Index for functional capacity and Pfeiffer test for cognitive status). Bivariate analysis was performed using the Chi-Square Test (or Fisher‟s Exact Test) and the Linear Chi-Square Test, calculating the prevalence ratio with 95% confidence interval. Variables with p value under 0.20 were included in the multivariate analysis, which was performed using the Stepwise Forward logistic regression. The inclusion of variables in the final model depended on the likelihood ratio test, absence of multicollinearity and on the Hosmer-Lemeshow test. A statistical significance level of 0.05 was considered. Six (1.8%) hospitalized elderly, one individual in palliative care (0.3%) and one (0.3%) individual under the age of 60 were excluded from the study. The final sample consisted of 321 elderly, mostly females, with a mean age of 81.5 years. The prevalence of UI was 59.43% and the final model revealed statistically a significant association between UI and white race, physical inactivity, stroke, mobility constraints and cognitive decline. The most frequent UI type was functional UI due to physical or cognitive disability, and incontinence control measures were applied only to a minority of residents (approximately 8%). It is concluded that UI is a health issue that affects more than half of the institutionalized elderly, and is associated with white race, physical inactivity, stroke and other geriatric syndromes such as immobility and cognitive disability. Most of these associated factors are modifiable and therefore the findings of this study highlight the importance of UI prevention and treatment in nursing homes, which include general measures, such as physical and psychosocial activities, and specific measures, such as prompted voiding
Resumo:
One of the most important problems in the elderly is a nutritional deficiency. Several physiological changes and the use of multiple drugs interfere with appetite, food intake and absorption of nutrients, which can lead to the risk and malnutrition in the elderly, especially among institutionalized. The present study aimed to evaluate the prevalence of malnutrition and risk for malnutrition and its associated factors in institutionalized elderly. The same can be characterized by the type individual, observational and cross-sectional. Obtaining the sample was through the records of individuals of long-stay institutions for the elderly in the city of Natal, RN. The elderly were evaluated through the Mini Nutritional Assessment (MNA) and triceps skinfold (TSF) and each senior or caregiver answered a questionnaire about information like type and dietary restrictions, accessibility to food, use of alcohol and tobacco, practice physical activity and appetite. Variables such as age, gender, education, marital status, time that the elderly living in the institution, the reason for the institutionalization and comorbidities were taken from the records of each senior. The frequency of food consumption of various food groups was assessed from the questionnaire frequency of feeding study Health, Wellbeing and Aging (HWA). Data were presented as means and standard deviations, absolute and relative frequencies. To analyze the frequency of consumption, there was a factor analysis with extraction of factors from the principal components analysis with varimax rotation. A bivariate analysis was performed using the chi-square and the magnitude of the effect observed by prevalence ratio (95% CI). The Poisson regression assessed the net effect of independent variables on the two outcomes, considering a significance level of 5%. We studied twelve Homes for the Aged totaling 381 seniors eligible for the study. The prevalence of risk of malnutrition was 46.1% (45.9 to 46.2) and malnutrition was 31.4% (31.2 to 31.5). The risk of malnutrition was significantly associated with the presence of urinary incontinence (RP = 1.444, 1.113 to 1.874) was associated with malnutrition and lack of appetite (RP = 1.757, 1.246 to 2.476), the fact that the individuals do not have access to food outside the institution (RP = 0.565, 0.337 to 0.946), low water consumption (RP = 1.646, 1.101 to 2.459) and dementia (PR = 1.537, 1.072 to 2.204). The high prevalence of malnutrition and risk of malnutrition in the study suggests that we should pay attention to information related to eating habits and the presence of comorbidities, as these can influence the nutritional status of this population
Resumo:
Avaliar os dados de aleitamento materno e alimentação complementar de crianças menores de um ano, do Rio Grande do Norte (RN), de acordo com o que é preconizado pelas políticas e ações de alimentação e nutrição. Métodos: Foi analisado o banco de dados da Chamada Neonatal do RN, pesquisa realizada pelo Ministério da Saúde em 2010. A amostra analisada foi de 837 pares mãe/filho que responderam ao questionário da pesquisa nos municípios investigados. Foram analisadas a prevalência de dados de aleitamento materno exclusivo (AME), na primeira hora de vida, parcial (AMP) e total (AMT), assim como dos alimentos ingeridos, pelas crianças, nas ultimas 24 horas anterior a entrevista. As frequências e médias foram feitas pelo comando Complex samples, no SPSS® 20.0, com IC95%. Foram estimadas as medianas de tempo de AME e AMT, assim como a mediana de tempo de introdução dos grupos de alimentos consumidos, em relação a idade da criança pelo método de probitos. Foi feita associação das probabilidades de tempo de AME e AMT com as variáveis sociodemográficas e de pré-natal (p<0.05). Resultados: Foram encontradas médias de idades de 5,28 ± 3,4 meses e 25,9 ± 6,4 anos, para crianças e mães, respectivamente. A prática de aleitamento na primeira hora de vida foi considerada boa (66,6%) e o percentual de AME (20%) razoável,segundo a Organização Mundial da Saúde, 2008. Mais da metade das crianças (55,1%) estavam em AMP. No total 60% estavam sendo amamentadas (AMT) ao final do primeiro ano de vida. O AME teve mediana de 63 dias e AMT de 358 dias. Estes dados não se diferenciaram muito entre a capital e os municípios do interior. A maioria das mães entrevistadas (73,8%) referiu ter tido orientação sobre aleitamento no pré- natal, tendo associação (p=0,03) com a probabilidade de tempo de AME, porém com pouca explicabilidade (R2= 0,011). Água ou chá, alimentos lácteos, frutas, legumes e verduras foram introduzidos precocemente com medianas menores que 180 dias. O aleitamento tende a diminuir e os alimentos tendem a aumentar o consumo de acordo com a idade da criança, com aumento exponencial do grupo calorias vazias . Conclusões: Conclui-se que mesmo com maioria das crianças amamentadas até um ano de vida, poucas estavam em AME e introduziram alimentos precocemente, não tendo resultado satisfatório frente ao preconizado pelas políticas públicas de alimentação e nutrição
Resumo:
A iniciação sexual é um marco significativo na vida do indivíduo, ocorrendo geralmente na adolescência. Importantes transformações biopsicossociais ocorrem nesta fase, denotando vulnerabilidades à vida do adolescente, dentre elas, as decorrentes da iniciação sexual, sendo o risco de infecção pelo HIV/aids a mais grave. A infecção pelo HIV/aids constitui atualmente um importante problema de Saúde Pública, estando os jovens no centro da epidemia mundial. No Brasil, dados do último boletim epidemiológico, lançado em 2013, apontam para a tendência de aumento de sua prevalência na população jovem. Desta forma, o presente estudo teve por objetivo investigar a associação entre iniciação sexual e o perfil sociodemográfico, o indicador de conhecimento das formas de transmissão do HIV/aids e fatores biopsicossociais autoestima e habilidades sociais, em adolescentes de 16 a 19 anos, de ambos os sexos, estudantes do nível médio técnico integrado, do Instituto Federal de Educação, Ciências e Tecnologia do Rio Grande do Norte, Campus Natal. Trata-se de um estudo transversal, cuja amostra foi constituída aleatoriamente por 200 alunos que responderam de forma anônima a quatro instrumentos: perfil sociodemográfico, questionário da Pesquisa de Conhecimentos, Atitudes e Práticas na População Brasileira (PCAP), Escala de Autoestima de Rosenberg e o Inventário de Habilidades Sociais para Adolescentes de Del-Prette (IHSA). A análise estatística dos dados foi realizada através do teste qui-quadrado de Pearson e do exato de Fisher (α <5%). A média de idade para a primeira relação sexual foi de 15,96 anos, com o início mais cedo para o sexo masculino. Verificou-se associações estatisticamente significativas entre iniciação sexual e as seguintes variáveis: idade, sexo, situação conjugal, religião, renda familiar, autoestima e o repertório de habilidades sociais. Observou-se ainda que apenas 11% dos adolescentes possuíam conhecimento correto acerca das formas de transmissão do HIV/aids. Conclui-se que os esforços para a prevenção das DST/aids precisam ser direcionados a campanhas e programas mais eficazes, que considerem não somente o caráter informativo, mas também os fatores psicossociais já que estes mostraram-se associados ao início da vida sexual
Resumo:
The purpose of this study was investigate the sexual division of the work in a chain of fast food, in Natal, RN. These aspects were analyzed with the ways of organization of the work, being made a case study. The main objective of this survey was to analyze the influence of gender relations in the insertion of men and women in the job market and to analyze the question of feminine submission in the professional world. These questions were analyzed considering the current period of the worldwide capitalism, from the characteristics of productive process and the growth of the service sectors. The research was made with a group of workers on the production sectors; attendance, management and human resources at restfood store, where six clerks were interviewed. Through our research, it is possible to perceive the permanence of the sexual division at the job in the interior of the productive processes at Restfood, that puts the woman in a subordinate position in relation to the man. This result can be confirmed if we considerate that the women, on this chain of food, occupy in first place the function of waitress and on this, trere s no functional progression, while her workmates (the men) for occupying other functions can progress inside the company. It was also evidenced that in a context of globalization of the capital, deregulation and disrespect of labor laws, the capital acts without any respect to workers. That was what we observed at the interviewer speech; the scarcity of the conditions of work and the constant disrespect of the labor laws. This way, we could evidence that the scarcity of work conditions hit men and women, but it has a crueler face with the women, and this one reproduces itself, day by day in the process of social reproduction, through family life, insertion in the world of the work, information and received social education. So, the capital explores all of them, but the gender relations create to the capital, the possibility of a different degree of exploration, becoming this way, the women main victims herself
Resumo:
One of the current challenges of Ubiquitous Computing is the development of complex applications, those are more than simple alarms triggered by sensors or simple systems to configure the environment according to user preferences. Those applications are hard to develop since they are composed by services provided by different middleware and it is needed to know the peculiarities of each of them, mainly the communication and context models. This thesis presents OpenCOPI, a platform which integrates various services providers, including context provision middleware. It provides an unified ontology-based context model, as well as an environment that enable easy development of ubiquitous applications via the definition of semantic workflows that contains the abstract description of the application. Those semantic workflows are converted into concrete workflows, called execution plans. An execution plan consists of a workflow instance containing activities that are automated by a set of Web services. OpenCOPI supports the automatic Web service selection and composition, enabling the use of services provided by distinct middleware in an independent and transparent way. Moreover, this platform also supports execution adaptation in case of service failures, user mobility and degradation of services quality. The validation of OpenCOPI is performed through the development of case studies, specifically applications of the oil industry. In addition, this work evaluates the overhead introduced by OpenCOPI and compares it with the provided benefits, and the efficiency of OpenCOPI s selection and adaptation mechanism
Resumo:
The Car Rental Salesman Problem (CaRS) is a variant of the classical Traveling Salesman Problem which was not described in the literature where a tour of visits can be decomposed into contiguous paths that may be performed in different rental cars. The aim is to determine the Hamiltonian cycle that results in a final minimum cost, considering the cost of the route added to the cost of an expected penalty paid for each exchange of vehicles on the route. This penalty is due to the return of the car dropped to the base. This paper introduces the general problem and illustrates some examples, also featuring some of its associated variants. An overview of the complexity of this combinatorial problem is also outlined, to justify their classification in the NPhard class. A database of instances for the problem is presented, describing the methodology of its constitution. The presented problem is also the subject of a study based on experimental algorithmic implementation of six metaheuristic solutions, representing adaptations of the best of state-of-the-art heuristic programming. New neighborhoods, construction procedures, search operators, evolutionary agents, cooperation by multi-pheromone are created for this problem. Furtermore, computational experiments and comparative performance tests are conducted on a sample of 60 instances of the created database, aiming to offer a algorithm with an efficient solution for this problem. These results will illustrate the best performance reached by the transgenetic algorithm in all instances of the dataset
Resumo:
Traditional applications of feature selection in areas such as data mining, machine learning and pattern recognition aim to improve the accuracy and to reduce the computational cost of the model. It is done through the removal of redundant, irrelevant or noisy data, finding a representative subset of data that reduces its dimensionality without loss of performance. With the development of research in ensemble of classifiers and the verification that this type of model has better performance than the individual models, if the base classifiers are diverse, comes a new field of application to the research of feature selection. In this new field, it is desired to find diverse subsets of features for the construction of base classifiers for the ensemble systems. This work proposes an approach that maximizes the diversity of the ensembles by selecting subsets of features using a model independent of the learning algorithm and with low computational cost. This is done using bio-inspired metaheuristics with evaluation filter-based criteria
Resumo:
It bet on the next generation of computers as architecture with multiple processors and/or multicore processors. In this sense there are challenges related to features interconnection, operating frequency, the area on chip, power dissipation, performance and programmability. The mechanism of interconnection and communication it was considered ideal for this type of architecture are the networks-on-chip, due its scalability, reusability and intrinsic parallelism. The networks-on-chip communication is accomplished by transmitting packets that carry data and instructions that represent requests and responses between the processing elements interconnected by the network. The transmission of packets is accomplished as in a pipeline between the routers in the network, from source to destination of the communication, even allowing simultaneous communications between pairs of different sources and destinations. From this fact, it is proposed to transform the entire infrastructure communication of network-on-chip, using the routing mechanisms, arbitration and storage, in a parallel processing system for high performance. In this proposal, the packages are formed by instructions and data that represent the applications, which are executed on routers as well as they are transmitted, using the pipeline and parallel communication transmissions. In contrast, traditional processors are not used, but only single cores that control the access to memory. An implementation of this idea is called IPNoSys (Integrated Processing NoC System), which has an own programming model and a routing algorithm that guarantees the execution of all instructions in the packets, preventing situations of deadlock, livelock and starvation. This architecture provides mechanisms for input and output, interruption and operating system support. As proof of concept was developed a programming environment and a simulator for this architecture in SystemC, which allows configuration of various parameters and to obtain several results to evaluate it
Resumo:
Clustering data is a very important task in data mining, image processing and pattern recognition problems. One of the most popular clustering algorithms is the Fuzzy C-Means (FCM). This thesis proposes to implement a new way of calculating the cluster centers in the procedure of FCM algorithm which are called ckMeans, and in some variants of FCM, in particular, here we apply it for those variants that use other distances. The goal of this change is to reduce the number of iterations and processing time of these algorithms without affecting the quality of the partition, or even to improve the number of correct classifications in some cases. Also, we developed an algorithm based on ckMeans to manipulate interval data considering interval membership degrees. This algorithm allows the representation of data without converting interval data into punctual ones, as it happens to other extensions of FCM that deal with interval data. In order to validate the proposed methodologies it was made a comparison between a clustering for ckMeans, K-Means and FCM algorithms (since the algorithm proposed in this paper to calculate the centers is similar to the K-Means) considering three different distances. We used several known databases. In this case, the results of Interval ckMeans were compared with the results of other clustering algorithms when applied to an interval database with minimum and maximum temperature of the month for a given year, referring to 37 cities distributed across continents
Resumo:
Model-oriented strategies have been used to facilitate products customization in the software products lines (SPL) context and to generate the source code of these derived products through variability management. Most of these strategies use an UML (Unified Modeling Language)-based model specification. Despite its wide application, the UML-based model specification has some limitations such as the fact that it is essentially graphic, presents deficiencies regarding the precise description of the system architecture semantic representation, and generates a large model, thus hampering the visualization and comprehension of the system elements. In contrast, architecture description languages (ADLs) provide graphic and textual support for the structural representation of architectural elements, their constraints and interactions. This thesis introduces ArchSPL-MDD, a model-driven strategy in which models are specified and configured by using the LightPL-ACME ADL. Such strategy is associated to a generic process with systematic activities that enable to automatically generate customized source code from the product model. ArchSPLMDD strategy integrates aspect-oriented software development (AOSD), modeldriven development (MDD) and SPL, thus enabling the explicit modeling as well as the modularization of variabilities and crosscutting concerns. The process is instantiated by the ArchSPL-MDD tool, which supports the specification of domain models (the focus of the development) in LightPL-ACME. The ArchSPL-MDD uses the Ginga Digital TV middleware as case study. In order to evaluate the efficiency, applicability, expressiveness, and complexity of the ArchSPL-MDD strategy, a controlled experiment was carried out in order to evaluate and compare the ArchSPL-MDD tool with the GingaForAll tool, which instantiates the process that is part of the GingaForAll UML-based strategy. Both tools were used for configuring the products of Ginga SPL and generating the product source code