Análise espectral de reflectarrays com substrato de duas camadas dielétricas anisotrópicas uniaxiais

Recently, an amazing development has been observed in telecommunication systems. Two good examples of this development are observed in mobile communication and aerospace systems. This impressive development is related to the increasing need for receiving and transmitting communication signals. Particularly, this development has required the study of new antennas and filters. This work presents a fullwave analysis of reflectarrays. The considered structures are composed by arrays of rectangular conducting patches printed on multilayer dieletric substrates, that are mounted on a ground plane. The analysis is developed in the spectral domain, using an equivalent transmission line method in combination with Galerkin method. Results for the reflection coefficient of these structures are presented and compared to those available in the literature. A good agreement was observed. Particularly, the developed analysis uses the transmission lines theory in combination with the incident potentials and the field continuity equations, at the structures interfaces, for obtaining the scattered field components expressions as function of the patch surface currents and of the incident field. Galerkin method is used to determine the unknown coefficients in the boundary value problem. Curves for the reflection coefficient of several reflectarray geometries are presented as function of frequency and of the structural parameters

Capacidade de absorção de energia de tubos de compósitos submetidos à compressão

Structures capable of absorbing large amounts of energy are of great interest, particularly for the automotive and aviation industries, to reduce tbe impact on passengers in the case of a collision. The energy absorption properties of composite materials structures can be tailored, thus making these structures an appealing option a substitute of more traditional structures in applications where energy absorption is crucial. ln this research, the influence of some parameters, which affect the energy absorption capacity of composite material tubes, was investigated. The tubes were fabricated by hand lay-up, using orthophthalic polyester resin and a plain weave E-glass fabric Test specimens were prepared and tested under compression load. The ínfluence of the following parameters on the specific energy absorption capacity of the tubes was studied: fiber configuration (0/90º or ± 45°), tube cross-section (circular or square), and processing conditions (with or without vacuum). The results indicated that circular cross-section tubes with fibers oriented at 0/90º presented the highest level of specific energy absorbed. Further, specimens from tubes fabricated under vacuum displayed higher energy absorption capacity, when compared with specimens from tubes fabricated without vacuum. Thus, it can be concluded that the fabrication process with vacuum produce composite structures with better energy absorption capacity

Determinação de dados de equilíbrio líquido-vapor a altas pressões para sistemas de hidrocarbonetos assimétricos

Crude oil is a complex liquid mixture of organic and inorganic compounds that are dominated by hydrocarbons. It is a mixture of alkanes from the simplest to more complex aromatic compounds that are present derivatives such as gasoline, diesel, alcohol, kerosene, naphtha, etc.. These derivatives are extracted from any oil, however, only with a very high quality, in other words, when the content of hydrocarbons of low molecular weight is high means that production of these compounds is feasible. The American Petroleum Institute (API) developed a classification system for the various types of oil. In Brazil, the quality of most of the oil taken from wells is very low, so it is necessary to generate new technology to develop best practices for refining in order to produce petroleum products of higher commercial value. Therefore, it is necessary to study the thermodynamic equilibrium properties of its derivative compounds of interest. This dissertation aims to determine vapor-liquid equilibrium (VLE) data for the systems Phenilcyclohexane - CO2, and Cyclohexane - Phenilcyclohexane - CO2 at high pressure and temperatures between 30 to 70oC. Furthermore, comparisons between measured VLE experimental data from this work and from the literature in relation to the Peng- Robinson molecular thermodynamic model, using a simulation program SPECS IVCSEP v5.60 and two adjustable interaction parameters, have been performed for modeling and simulation purposes. Finally, the developed apparatus for determination of phase equilibrium data at high pressures is presented

Otimização do tempo e temperatura no processamento da gipsita oriunda dos cristalizadores da produção de sal para obter gesso de uso na construção civil

During the process of the salt production, the first the salt crystals formed are disposed of as industrial waste. This waste is formed basically by gypsum, composed of calcium sulfate dihydrate (CaSO4.2H2O), known as carago cru or malacacheta . After be submitted the process of calcination to produce gypsum (CaSO4.0,5H2O), can be made possible its application in cement industry. This work aims to optimize the time and temperature for the process of calcination of the gypsum (carago) for get beta plaster according to the specifications of the norms of civil construction. The experiments involved the chemical and mineralogical characterization of the gypsum (carago) from the crystallizers, and of the plaster that is produced in the salt industry located in Mossoró, through the following techniques: x-ray diffraction (XRD), x-ray fluorescence (FRX), thermogravimetric analysis (TG/DTG) and scanning electron microscopy (SEM) with EDS. For optimization of time and temperature of the process of calcination was used the planning three factorial with levels with response surfaces of compressive mechanical tests and setting time, according norms NBR-13207: Plasters for civil construction and x-ray diffraction of plasters (carago) beta obtained in calcination. The STATISTICA software 7.0 was used for the calculations to relate the experimental data for a statistical model. The process for optimization of calcination of gypsum (carago) occurred in the temperature range from 120° C to 160° C and the time in the range of 90 to 210 minutes in the oven at atmospheric pressure, it was found that with the increase of values of temperature of 160° C and time calcination of 210 minutes to get the results of tests of resistance to compression with values above 10 MPa which conform to the standard required (> 8.40) and that the X-ray diffractograms the predominance of the phase of hemidrato beta, getting a beta plaster of good quality and which is in accordance with the norms in force, giving a by-product of the salt industry employability in civil construction

Avaliacao de dados de secagem de suspensoes de polpas de frutas em leito de jorro com alimentacao intermitente

The objective of this work was the development and improvement of the mathematical models based on mass and heat balances, representing the drying transient process fruit pulp in spouted bed dryer with intermittent feeding. Mass and energy balance for drying, represented by a system of differential equations, were developed in Fortran language and adapted to the condition of intermittent feeding and mass accumulation. Were used the DASSL routine (Differential Algebraic System Solver) for solving the differential equation system and used a heuristic optimization algorithm in parameter estimation, the Particle Swarm algorithm. From the experimental data food drying, the differential models were used to determine the quantity of water and the drying air temperature at the exit of a spouted bed and accumulated mass of powder in the dryer. The models were validated using the experimental data of drying whose operating conditions, air temperature, flow rate and time intermittency, varied within the limits studied. In reviewing the results predicted, it was found that these models represent the experimental data of the kinetics of production and accumulation of powder and humidity and air temperature at the outlet of the dryer

Determinação de dados de equilíbrio de fases para sistemas aquosos com eletrólitos

In the present work are established initially the fundamental relationships of thermodynamics that govern the equilibrium between phases, the models used for the description of the behavior non ideal of the liquid and vapor phases in conditions of low pressures. This work seeks the determination of vapor-liquid equilibrium (VLE) data for a series of multicomponents mixtures of saturated aliphatic hydrocarbons, prepared synthetically starting from substances with analytical degree and the development of a new dynamic cell with circulation of the vapor phase. The apparatus and experimental procedures developed are described and applied for the determination of VLE data. VLE isobarics data were obtained through a Fischer s ebulliometer of circulation of both phases, for the systems pentane + dodecane, heptane + dodecane and decane + dodecane. Using the two new dynamic cells especially projected, of easy operation and low cost, with circulation of the vapor phase, data for the systems heptane + decane + dodecane, acetone + water, tween 20 + dodecane, phenol + water and distillation curves of a gasoline without addictive were measured. Compositions of the equilibrium phases were found by densimetry, chromatography, and total organic carbon analyzer. Calibration curves of density versus composition were prepared from synthetic mixtures and the behavior excess volumes were evaluated. The VLE data obtained experimentally for the hydrocarbon and aqueous systems were submitted to the test of thermodynamic consistency, as well as the obtained from the literature data for another binary systems, mainly in the bank DDB (Dortmund Data Bank), where the Gibbs-Duhem equation is used obtaining a satisfactory data base. The results of the thermodynamic consistency tests for the binary and ternary systems were evaluated in terms of deviations for applications such as model development. Later, those groups of data (tested and approved) were used in the KijPoly program for the determination of the binary kij parameters of the cubic equations of state original Peng-Robinson and with the expanded alpha function. These obtained parameters can be applied for simulation of the reservoirs petroleum conditions and of the several distillation processes found in the petrochemistry industry, through simulators. The two designed dynamic cells used equipments of national technology for the determination of VLE data were well succeed, demonstrating efficiency and low cost. Multicomponents systems, mixtures of components of different molecular weights and also diluted solutions may be studied in these developed VLE cells

Equilíbrio líquido-líquido de sistemas aquosos com tensoativos polietoxilados: dados experimentais e modelagem

The nonionic surfactants when in aqueous solution, have the property of separating into two phases, one called diluted phase, with low concentration of surfactant, and the other one rich in surfactants called coacervate. The application of this kind of surfactant in extraction processes from aqueous solutions has been increasing over time, which implies the need for knowledge of the thermodynamic properties of these surfactants. In this study were determined the cloud point of polyethoxylated surfactants from nonilphenolpolietoxylated family (9,5 , 10 , 11, 12 and 13), the family from octilphenolpolietoxylated (10 e 11) and polyethoxylated lauryl alcohol (6 , 7, 8 and 9) varying the degree of ethoxylation. The method used to determine the cloud point was the observation of the turbidity of the solution heating to a ramp of 0.1 ° C / minute and for the pressure studies was used a cell high-pressure maximum ( 300 bar). Through the experimental data of the studied surfactants were used to the Flory - Huggins models, UNIQUAC and NRTL to describe the curves of cloud point, and it was studied the influence of NaCl concentration and pressure of the systems in the cloud point. This last parameter is important for the processes of oil recovery in which surfactant in solution are used in high pressures. While the effect of NaCl allows obtaining cloud points for temperatures closer to the room temperature, it is possible to use in processes without temperature control. The numerical method used to adjust the parameters was the Levenberg - Marquardt. For the model Flory- Huggins parameter settings were determined as enthalpy of the mixing, mixing entropy and the number of aggregations. For the UNIQUAC and NRTL models were adjusted interaction parameters aij using a quadratic dependence with temperature. The parameters obtained had good adjust to the experimental data RSMD < 0.3 %. The results showed that both, ethoxylation degree and pressure increase the cloudy points, whereas the NaCl decrease

Determinação de Dados de Equilíbrio Líquido-Vapor para Sistemas Hidrocarbonetos e Desenvolvimento de uma Nova Célula Dinâmica

In the present work are established initially the fundamental relationships of thermodynamics that govern the equilibrium between phases, the models used for the description of the behavior non ideal of the liquid and vapor phases in conditions of low pressures. This work seeks the determination of vapor-liquid equilibrium (VLE) data for a series of multicomponents mixtures of saturated aliphatic hydrocarbons, prepared synthetically starting from substances with analytical degree and the development of a new dynamic cell with circulation of the vapor phase. The apparatus and experimental procedures developed are described and applied for the determination of VLE data. VLE isobarics data were obtained through a Fischer's ebulliometer of circulation of both phases, for the systems pentane + dodecane, heptane + dodecane and decane + dodecane. Using the two new dynamic cells especially projected, of easy operation and low cost, with circulation of the vapor phase, data for the systems heptane + decane + dodecane, acetone + water, tween 20 + dodecane, phenol + water and distillation curves of a gasoline without addictive were measured. Compositions of the equilibrium phases were found by densimetry, chromatography, and total organic carbon analyzer. Calibration curves of density versus composition were prepared from synthetic mixtures and the behavior excess volumes were evaluated. The VLE data obtained experimentally for the hydrocarbon and aqueous systems were submitted to the test of thermodynamic consistency, as well as the obtained from the literature data for another binary systems, mainly in the bank DDB (Dortmund Data Bank), where the Gibbs-Duhem equation is used obtaining a satisfactory data base. The results of the thermodynamic consistency tests for the binary and ternary systems were evaluated in terms of deviations for applications such as model development. Later, those groups of data (tested and approved) were used in the KijPoly program for the determination of the binary kij parameters of the cubic equations of state original Peng-Robinson and with the expanded alpha function. These obtained parameters can be applied for simulation of the reservoirs petroleum conditions and of the several distillation processes found in the petrochemistry industry, through simulators. The two designed dynamic cells used equipments of national technology for the determination Humberto Neves Maia de Oliveira Tese de Doutorado PPGEQ/PRH-ANP 14/UFRN of VLE data were well succeed, demonstrating efficiency and low cost. Multicomponents systems, mixtures of components of different molecular weights and also diluted solutions may be studied in these developed VLE cells

A argumentação como elemento discursivo na mídia digital: um estudo sobre o blog fatos e dados

This thesis studies the use of argumentation as a discursive element in digital media, particularly blogs. We analyzed the Blog "Fatos e Dados" [Facts and Data], created by Petrobras in the context of allegations of corruption that culminated in the installation of a Parliamentary Commission of Inquiry to investigate the company within the Congress. We intend to understand the influence that the discursive elements triggered by argumentation exercise in blogs and about themes scheduling. To this end, we work with notions of argumentation in dialogue with questions of language and discourse from the work of Charaudeau (2006), Citelli (2007), Perelman & Olbrechts-Tyteca (2005), Foucault (2007, 2008a), Bakhtin (2006) and Breton (2003). We also observe our subject from the perspective of social representations, where we seek to clarify concepts such as public image and the use of representations as argumentative elements, considering the work of Moscovici (2007). We also consider reflections about hypertext and the context of cyberculture, with authors such as Levy (1993, 1999, 2003), Castells (2003) and Chartier (1999 and 2002), and issues of discourse analysis, especially in Orlandi (1988, 1989, 1996 and 2001), as well as Foucault (2008b). We analyzed 118 posts published in the first 30 days of existence of the blog "Fatos e Dados" (between 2 June and 1 July 2009), and analyzed in detail the top ten. A corporate blog aims to defend the points of view and public image of the organization, and, therefore, uses elements of social representations to build their arguments. It goes beyond the blog, as the main news criteria, including the posts we reviewed, the credibility of Petrobras as the source of information. In the posts analyzed, the news values of innovation and relevance also arise. The controversy between the Blog and the press resulted from an inadequacy and lack of preparation of media to deal with a corporate blog that was able to explore the characteristics of liberation of the emission pole in cyberculture. The Blog is a discursive manifestation in a concrete historical situation, whose understanding and attribution of meaning takes place from the social relations between subjects that, most of the time, place themselves in discursive and ideological dispute between each other - this dispute also affects the movements of reading and reading production. We conclude that intersubjective relationships that occur in blogs change, in the form of argumentative techniques used, the notions of news criteria, interfering with scheduling of news and organization of information in digital media outlets. It is also clear the influence that the discursive elements triggered by argumentation exercise in digital media, trying to resize and reframe frames of reality conveyed by it in relation to the subject-readers. Blogs have become part of the scenario information with the emergence of the Internet and are able to interfere in a more effective way to organize the scheduling of media from the conscious utilization of argumentative elements in their posts

Migração e seletividade na região nordeste: um estudo a partir dos dados do censo demográfico de 2010

The aim of this study is to analyze the effect of migration on the income differential between northeastern migrants and nonmigrants and there by verify that the immigrants make up a group or not positively selected. The assumption that will be tested is that the presence of these immigrants affects income inequality in the region receptor, which may explain part of the high-stopping inequality in the Brazilian Northeast. The study is based on the literature selectivity migration introduced by Roy (1951), Borjas (1987) and Chiswick (1999). Does the estimated wage equation Mincer (1974) through the method of OLS, using information from the microdata sample of the 2010 Census, the Brazilian Institute of Geography and Statistics (IBGE). The results which correspond to the comparison of socioeconomic profile, showed that immigrants are more qualified and, on average, better paid than non-migrants. With the estimation of the model, it was found that, keeping all other variables constant, the income that immigrants earn is 14.43% higher than that of non-migrants. Thus, there was existence of positive selectivity in migration directed to the Northeast

Uso de técnicas de Geoprocessamento e Sensoriamento Remoto no levantamento e integração de dados necessários a gestão ambiental dos campos de extração de óleo e gás do Canto do Amaro e Alto da Pedra no município de Mossoró - RN

The objective of this work is to identify, to chart and to explain the evolution of the soil occupation and the envirionment vulnerability of the areas of Canto do Amaro and Alto da Pedra, in the city of Mossoró-RN, having as base analyzes it multiweather of images of orbital remote sensors, the accomplishment of extensive integrated works of field to a Geographic Information System (GIS). With the use of inserted techniques of it analyzes space inserted in a (GIS), and related with the interpretation and analyzes of products that comes from the Remote Sensoriamento (RS.), make possible resulted significant to reach the objectives of this works. Having as support for the management of the information, the data set gotten of the most varied sources and stored in digital environment, it comes to constitute the geographic data base of this research. The previous knowledge of the spectral behavior of the natural or artificial targets, and the use of algorithms of Processing of Digital images (DIP), it facilitates the interpretation task sufficiently and searchs of new information on the spectral level. Use as background these data, was generated a varied thematic cartography was: Maps of Geology, Geomorfológicals Units soils, Vegetation and Use and Occupation of the soil. The crossing in environment SIG, of the above-mentioned maps, generated the maps of Natural and Vulnerability envirionmental of the petroliferous fields of I Canto do Amaro and Alto da Pedra-RN, working in an ambient centered in the management of waters and solid residuos, as well as the analysis of the spatial data, making possible then a more complex analysis of the studied area

Estimação em modelos de tempo de falha acelerado para dados de sobrevivência correlacionados

We presented in this work two methods of estimation for accelerated failure time models with random e_ects to process grouped survival data. The _rst method, which is implemented in software SAS, by NLMIXED procedure, uses an adapted Gauss-Hermite quadrature to determine marginalized likelihood. The second method, implemented in the free software R, is based on the method of penalized likelihood to estimate the parameters of the model. In the _rst case we describe the main theoretical aspects and, in the second, we briey presented the approach adopted with a simulation study to investigate the performance of the method. We realized implement the models using actual data on the time of operation of oil wells from the Potiguar Basin (RN / CE).

Não vício assintótico, consistência forte e uniformemente forte de estimadores do tipo núcleo para dados direcionais sobre uma esfera unitária k-dimensional

In this work we studied the asymptotic unbiasedness, the strong and the uniform strong consistencies of a class of kernel estimators fn as an estimator of the density function f taking values on a k-dimensional sphere

Dados normativos do teste de atenção por cancelamento em estudantes de Natal/RN

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Produção e validação de um indicador de saúde bucal para idosos a partir de dados secundários do SB Brasil 2010

Dentre os vários aspectos da saúde do idoso, a saúde bucal merece atenção especial pelo fato de que, historicamente, nos serviços odontológicos, não se considera esse grupo populacional como prioridade de atenção. Por isso, se faz necessária a produção de um indicador multidimensional capaz de mensurar todas as alterações bucais encontradas em um idoso, facilitando a categorização da saúde bucal como um todo. Tal indicador representará um importante instrumento capaz de elencar prioridades de atenção voltadas à população idosa. Portanto, o estudo em questão propõe a produção e validação de um indicador de saúde bucal a partir dos dados secundários coletados pelo projeto SB Brasil 2010 referente ao grupo etário de 65 a 74 anos. A amostra foi representada pelos 7619 indivíduos do grupo etário de 65 a 74 anos que participaram da pesquisa nas 5 (cinco) regiões do Brasil. Tais indivíduos foram submetidos à avaliação epidemiológica das condições de saúde bucal, a partir dos índices CPO-d, CPI e PIP. Além disso, verificou-se o uso e necessidade de prótese, bem como características sociais, econômicas e demográficas. Uma análise fatorial identificou um número relativamente pequeno de fatores comuns, através da análise de componentes principais. Após a nomenclatura dos fatores, foi realizada a soma dos escores fatoriais por indivíduo. Por último, a dicotomização dessa soma nos forneceu o indicador de saúde bucal proposto. Para esse estudo foram incluídas na análise fatorial 12 variáveis de saúde bucal oriundas do banco de dados do SB Brasil 2010 e, também 3 variáveis socioeconômicas e demográficas. Com base no critério de Kaiser, observa-se que foram retidos cinco fatores que explicaram 70,28% da variância total das variáveis incluídas no modelo. O fator 1 (um) explica sozinho 32,02% dessa variância, o fator 2 (dois) 14,78%, enquanto que os fatores 3 (três), 4 (quatro) e 5 (cinco) explicam 8,90%, 7,89% e 6,68%, respectivamente. Por meio das cargas fatoriais, o fator um foi denominado dente hígido e pouco uso de prótese , o dois doença periodontal presente , o três necessidade de reabilitação , já o quarto e quinto fator foram denominados de cárie e condição social favorável , respectivamente. Para garantir a representatividade do indicador proposto, realizou-se uma segunda análise fatorial em uma subamostra da população de idosos investigados. Por outro lado, a aplicabilidade do indicador produzido foi testada por meio da associação do mesmo com outras variáveis do estudo. Por fim, Cabe ressaltar que, o indicador aqui produzido foi capaz de agregar diver sas informações a respeito da saúde bucal e das condições sociais desses indivíduos, traduzindo assim, diversos dados em uma informação simples, que facilita o olhar dos gestores de saúde sobre as reais necessidades de intervenções em relação à saúde bucal de determinada população