33 resultados para Silva, Antonio Carlos Ribeiro de Andrada Machado e, 1773-1845
Resumo:
O objetivo deste trabalho é investigar como as representações discursivas do locutor e dos alocutários são construídas no discurso de renúncia ao mandato de senador, proferido por Antonio Carlos Magalhães (ACM), na 62ª sessão deliberativa ordinária, em 30/5/2001. A perspectiva teórica que adotamos situa-se no campo da Linguística do Texto, com foco na abordagem da Análise Textual dos Discursos ATD (Adam, 2011). A noção de representação discursiva apresentada pela ATD constitui um dos aspectos da dimensão semântica do texto e baseia-se parcialmente nos trabalhos de Grize sobre a esquematização (1990, 1996). Complementamos as categorias de análise com contribuições que nos permitem detalhar a expressão linguística, textual, e discursiva das representações discursivas (Neves, 2006; Castilho 2010; Rodrigues, Passeggi, Silva Neto, 2010; Rodrigues et al. 2012; Passeggi, 2012). O enfoque metodológico é qualitativo, descritivo e interpretativista (Minayo, 1994; Trivinõs; 1987; Gil, 2002). Os procedimentos de análise utilizam as categorias semânticas de referenciação, predicação, modificação (de referentes e predicações), localização espacial e temporal, conexão e comparação. A representação discursiva do locutor (ACM) é constituída pelo conjunto de representações mais específicas, expressas nas referenciações e nas suas modificações: vítima; político; sigla; baiano, nordestino; presidente do senado; senador confiante; condenado. ACM, como protagonista, assume sempre a sua voz no discurso, manifesta seus pontos de vista e posiciona-se como sujeito ativo, consciente da importância do seu papel político e social, que o torna alvo e vítima das ações dos adversários. Complementando essa referenciação, as predicações e suas modificações se expressam através de verbos de ação, em especial, verbos na 1ª pessoa do singular que marcam o tempo presente, real e conclusivo de ações que constroem um cenário positivo para si mesmo. A localização temporal e espacial, indica as ações realizadas pelos participantes nas diversas etapas temporais selecionadas pelo texto, articuladas a três espaços principais: o Senado Federal, o Brasil e, naturalmente, a Bahia. Por sua vez, conectores adversativos (sobretudo, mas ), explicativos e condicionais acompanham e estruturam o ritmo argumentativo do discurso de renúncia de ACM
Resumo:
This dissertation aims to continue the work developed previously concerning the properties of the employer of last resort program (ELR) that would be able to promote a complete elimination of the involuntary unemployment from the economy, so much of the unemployment generated by structural problems as for problems of the conjuncture, as the present world financial crisis. Besides, it intends to deepen the study concerning the applicability of that program to the Brazilian economy, estimating their potential target population in the country and the cost with the workers' remuneration. It was presented the ELR theoretical-conceptual structure and a debate concerning their economic viability; the program properties that turn it more efficient than the onetary and fiscal policies (PMFs) in the fight against involuntary unemployment in times of financial crises; a study on its applicability to the Brazilian socioeconomic specificities and an estimate of their potential target population and of the annual wage cost in the country, as a whole, and in the specific case of the Northeast region and of the state of Rio Grande do Norte.
Resumo:
The current natural gas production of 52 Mm3d-1 and the large projects for its expansion has been setting new boundaries for the Brazilian industry of oil and gas. So far, one of the biggest challenges regards to the logistics for gas transportation from offshore fields. Therefore, the transformation of natural gas into gasoline, diesel and/or olefins via Fischer-Tropsch synthesis would be an alternative to this matter. In this work, the production of hydrocarbons by Fischer-Tropsch synthesis in a slurry reactor was investigated and a perovskite-type catalyst (LayCu0,4Fe0,6O3 ± d) was used with y varying from 0 to 1 on a molar basis. In addition, Nb2O5 support was also applied in order to observe the selectivity of the produced hydrocarbons by the Fischer-Tropsch process. It is shown that the hydrogen conversion was influenced by the support as well as the different phases of the samples. The kinetic results for the CO2 production suffered great influence with the introduction of the Nb2O5 support throughout the series of samples studied. The catalysts allowed obtaining welldefined cuts of hydrocarbons in the range of C1-C6 and C17-C28, and these results were clearly influenced by the support and the lanthanum content. The higher olefin/paraffin ratio obtained was 1.8 when using a non-supported perovskite with y equal to 0.8. This would indicate the suitability of using this material for the production of olefins
Resumo:
The aim of this work was to study a series of 11 different compositions of Ti-Zr binary alloys resistance to aggressive environment, i. e., their ability to keep their surface properties and mass when exposed to them as a way to evaluate their performance as biomaterials. The first stage was devoted to the fabrication of tablets from these alloys by Plasma-Skull casting method using a Discovery Plasma machine from EDG Equipamentos, Brazil. In a second stage, the chemical composition of each produced tablet was verified. In a third stage, the specimen were submitted to: as-cast microstructure analysis via optical and scanning electron microscopy (OM and SEM), x-ray dispersive system (EDS) chemical analysis via SEM, Vickers hardness tests for mechanical evaluation and corrosion resistence tests in a 0.9% NaCl solution to simulate exposition to human saliva monitored by open circuit potential and polarization curves. From the obtained results, it was possible to infer that specimens A1 (94,07 wt% Ti and 5,93% wt% Zr), A4 (77,81 wt % Ti and 22,19 wt % Zr) and A8 (27,83 wt% Ti and 72,17 wt% Zr), presented best performance regarding to corrosion resistance, homogeneity and hardness which are necessary issues for biomaterials to be applied as orthopedic and odontological prosthesis
Resumo:
The religious plurality has been increasingly intense in Brazil, while it has served as an object of study in various fields of knowledge. In this context, this paper aims to point out the general heterogeneity among experienced growth of Protestant and evangelical denominations, especially those who claim to be inclusive by attending to human diversity, seeking to understand the relationship between religion and homosexuality. Specific objectives aim to understand the functioning and speeches produced by Comunidade Cristã Nova Esperança in Natal. The theoretical framework was seated in the works of Bento (2008), Lima (2009), Goffman (2001), Natividade (2008), Musskopf (2008), Helminiak (1998), Foucault (1997), among others. We tried to discuss the trajectory and how is the process of organization of the Comunidade Cristã Nova Esperança in Natal, the social advances that have reached homosexuals in our country, how this institution has contributed to the shift in paradigm in Christianity in respect to matters pertaining to religion and homosexuality, and the meaning of being a homosexual christian from the viewpoint perceived by social subjects living this experience
Resumo:
The clay mineral attapulgite is a group of hormitas, which has its structures formed by microchannels, which give superior technological properties classified the industrial clays, clays of this group has a very versatile range of applications, ranging from the drilling fluid for wells oil has applications in the pharmaceutical industry. Such properties can be improved by activating acid and / or thermal activation. The attapulgite when activated can improve by up to 5-8 times some of its properties. The clay was characterized by X-ray diffraction, fluorescence, thermogravimetric analysis, differential thermal analysis, scanning electron microscopy and transmission electron microscopy before and after chemical activation. It can be seen through the results the efficiency of chemical treatment, which modified the clay without damaging its structure, as well as production of polymer matrix composites with particles dispersed atapugita
Resumo:
In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process
Resumo:
With the increasing of demand for natural gas and the consequent growth of the pipeline networks, besides the importance of transport and transfer of oil products by pipeline, and when it comes to product quality and integrity of the pipeline there is an important role regarding to the monitoring internal corrosion of the pipe. This study aims to assess corrosion in three pipeline that operate with different products, using gravimetric techniques and electrical resistance. Chemical analysis of residues originated in the pipeline helps to identify the mechanism corrosive process. The internal monitoring of the corrosion in the pipelines was carried out between 2009 and 2010 using coupon weight loss and electrical resistance probe. Physico-chemical techniques of diffraction and fluorescence X-rays were used to characterize the products of corrosion of the pipelines. The corrosion rate by weight loss was analyzed for every pipeline, only those ones that has revealed corrosive attack were analyzed located corrosion rate. The corrosion potential was classified as low to pipeline gas and ranged from low to severe for oil pipelines and the pipeline derivatives. Corrosion products were identified as iron carbonate, iron oxide and iron sulfide
Resumo:
Lithiasis is considered a public health issue due to its high prevalence and rates of recurrence. Objective: To identify risk factors for lithiasis in kidney stone patients from Fortaleza, Brazil. In the first stage of the study, the medical records of 197 patients with urinary lithiasis covering the period 1996 2006 were analyzed with regard to clinical and metabolic data. In the second stage, 340 kidney stones were submitted to morphological examination under 10x magnification. According to the external morphology and the cut surface, the stones were classified as pure or mixed, and major and minor components were identified. In addition, the stone fragments of 25 patients treated with lithotripsy were submitted to morphological analysis. In the third stage, a subsample of 50 stones was used in a double-blind comparison of morphological and chemical findings. Results were expressed as concordant, partly concordant (discordant for minor components) or discordant (discordant for major components). The average age of first symptoms was 35.8±13.3 years, with no significant difference between the genders. The male/female ratio was 1:1.7. Recurrence was reported in 53.3% of cases. The main metabolic changes observed were hypernatriuria (80.7%), hypercalciuria (48.7%), low urine volume (43.7%), hyperoxaluria (30.5%) and hyperuricosuria (17.3%). Pure stones represented 34.7% of the total sample of 340 stones. The most common route of elimination was spontaneous for pure stones (49.1%) and surgical for mixed stones (50.5%). Pure stones consisted most frequently of calcium oxalate (OxCa) (59.3%) and uric acid (UA) (23.7%), the former prevalent in women, the latter prevalent in men. The most frequently observed component in mixed stones was OxCa (67.1%), followed by carbapatite (11.2%) and struvite (7.9%). The main components were OxCa and UA for men, and carbapatite and struvite for women. Nearly half (48%) the 25 analyzed fragments were pure, consisting of calcium oxalate dihydrate (COD) (56%), calcium oxalate monohydrate (COM) (48%), phosphate (32%) and UA (20%). Four patients (16%) had infectious stones. In the chemical analysis of the subsample of 50 stones, the most 64 frequently observed major components were calcium (70%), oxalate (66%), ammonium (56%), urate (28%) and carbonate (24%). In the morphological analysis, the main components were calcium and magnesium phosphate (32%), COM (24%), UA (20%), COD (18%) and cystine (6%). Morphological and chemical findings were totally concordant for 38% of the stones, partly concordant in 52% and discordant in 10%. Conclusion: The risk factors for lithiasis in kidney stone patients from Fortaleza (Brazil) were hyperoxaluria, hypercalciuria with or without hypernatriuria, hyperuricosuria and low urine volume
Resumo:
According to the methodological presuppositions of the understanding interview (KAUFMAAN, 1996), the present work aims to understand the Digital Inclusion starting from the oral speeches of eight monitors of Digital Inclusion and Citizenship Schools of the Technical Assistance and Rural Extension Company EMATER, located in municipal districts that belong to six regions of the state of Rio Grande do Norte. It also had the intention to analyze it (the Digital Inclusion), while educational process and its relation with the citizenship. In its first part, an analysis of the discussions about digital inclusion was developed, and a reflection about the new technologies in current times, followed by a contextualization of the rural space and the methodological course of the study, when its guiding axis and the travelled roads were presented, where the object of study is built slowly and progressively through a theoretical elaboration that increases day by day, as of the technologies forged in the field of research and formation of the subject. The second part presents the study of the collected information, that is organized in three chapters denominated as follows: Conceptions of the local context; What does digital inclusion mean? and The monitor as an educator. The reports do evidence a peculiar dissatisfaction with the social reality where they are found, that contradicts the positive reflections and perspectives of the studied authors, once that, within the actual conjuncture, the rural space has acquired another meaning, no longer being seen as a far late place. By trying to define the digital inclusion, the monitors make an association with change, the access to knowledge, active participation in society and improvement of the life conditions. Here a mission sense stands out, related to the ideological precept, which has been managing its activities. Towards the monitor‟s relation within the classroom, the senses evidence how they are and how they have been developing their daily activities. Tensions, fears and insecurities are identified, but at the same time, a compromise. The final considerations implicate to the need of reorientations in the formative process of this professionals, detaching the importance of their activities while agents of inclusion and social transformation
Resumo:
Desde a criação da tecnologia e do seu uso pelas empresas, a relação custo e benefício nem sempre foi bem elucidada tanto para os responsáveis pela área de tecnologia quanto para a alta direção. Mas, apesar disto, cada vez mais as organizações investem maciçamente em tecnologia, esperando que esta seja a solução para diversos problemas. Por isto, esta questão tem se tornado crucial para o processo de tomada de decisões, visto que investimentos nesta área costumam ser dispendiosos e, na atual conjuntura, estas análises precisam ser extremamente criteriosas para que se miniminizem as possibilidades de insucesso dos projetos, principalmente numa economia estabilizada e de concorrência acirrada. Uma das alternativas que as empresas têm buscado para atingir o sucesso e correr menos riscos é a terceirização da área de TI. Partindo desta visão, a presente dissertação tem por objetivo realizar uma investigação sobre a terceirização dos serviços de TI em todos os seus aspectos, isto é, desde a sua motivação, serviços efetivamente terceirizados, vantagens, desvantagens e possíveis obstáculos, a visão do alinhamento estratégico da TI, os processos de gestão de contratos e formas de controle e, por fim, tendências futuras. Trata-se de uma pesquisa de múltiplos casos, envolvendo franquias do Sistema Coca-Cola no Brasil. O estudo apresenta uma pesquisa bibliográfica sobre o processo de tomada de decisão empresarial, a análise de investimentos, a gestão e a terceirização da TI, o que permitem definir as dimensões de análise da pesquisa. Na pesquisa de campo foram entrevistados os gerentes da área de TI, nas cidades de Brasília-DF, Goiânia-GO e Ribeirão Preto-SP. A pesquisa de campo permitiu identificar como as mesmas avaliam seus investimentos em TI, como esta área é gerenciada, o que as levou a optar pela terceirização e como os processos terceirizados afetam a organização. Por se tratar de uma pesquisa qualitativa, optou-se por analisar comparativamente as três organizações. Com a realização deste estudo, obtiveram-se, como principais resultados, que as organizações estão utilizando a terceirização em TI para focar no negócio principal e, mesmo encontrando diversas desvantagens, inclusive com relação a custos, acreditam que os benefícios justificam. Ainda identificaram-se alguns obstáculos internos para a terceirização, principalmente quanto ao receio de se perder a inteligência do negócio. O acompanhamento dessas atividades terceirizadas é realizado pela equipe interna e por critérios estruturados, onde se verificam os níveis de serviço
Resumo:
This work treats of an implementation OFDMA baseband processor in hardware for LTE Downlink. The LTE or Long Term Evolution consist the last stage of development of the technology called 3G (Mobile System Third Generation) which offers an increasing in data rate and more efficiency and flexibility in transmission with application of advanced antennas and multiple carriers techniques. This technology applies in your physical layer the OFDMA technical (Orthogonal Frequency Division Multiple Access) for generation of signals and mapping of physical resources in downlink and has as base theoretical to OFDM multiple carriers technique (Orthogonal Frequency Division Multiplexing). With recent completion of LTE specifications, different hardware solutions have been developed, mainly, to the level symbol processing where the implementation of OFDMA processor in base band is commonly considered, because it is also considered a basic architecture of others important applications. For implementation of processor, the reconfigurable hardware offered by devices as FPGA are considered which shares not only to meet the high requirements of flexibility and adaptability of LTE as well as offers possibility of an implementation quick and efficient. The implementation of processor in reconfigurable hardware meets the specifications of LTE physical layer as well as have the flexibility necessary for to meet others standards and application which use OFDMA processor as basic architecture for your systems. The results obtained through of simulation and verification functional system approval the functionality and flexibility of processor implemented
Resumo:
The formation of paraffin deposits is common in the petroleum industry during production, transport and treatment stages. It happens due to modifications in the thermodynamic variables that alter the solubility of alkanes fractions present in petroleum. The deposition of paraffin can provoke significant and growing petroleum losses, arriving to block the flow, hindering to the production. This process is associated with the phases equilibrium L-S and the stages and nucleation, growth and agglomeration the crystals. That process is function of petroleum intrinsic characteristics and temperature and pressure variations, during production. Several preventive and corrective methods are used to control the paraffin crystallization, such as: use of chemical inhibitors, hot solvents injection, use of termochemistry reactions, and mechanical removal. But for offshore exploration this expensive problem needs more investigation. Many studies have been carried through Wax Appearance Temperature (WAT) of paraffin; therefore the formed crystals are responsible for the modification of the reologics properties of the oil, causing a lot off operational problems. From the determination of the WAT of a system it is possible to affirm if oil presents or not trend to the formation of organic deposits, making possible to foresee and to prevent problems of wax crystallization. The solvent n-paraffin has been widely used as fluid of perforation, raising the production costs when it is used in the removal paraffin deposits, needing an operational substitute. This study aims to determine the WAT of paraffin and the interference off additives in its reduction, being developed system paraffin/solvent/surfactant that propitiates the wax solubilization. Crystallization temperatures in varied paraffin concentrations and different solvents were established in the first stage of the experiments. In the second stage, using the methodology of variation of the photoelectric signal had been determined the temperature of crystallization of the systems and evaluated the interferences of additives to reduction of the WAT. The experimental results are expressed in function of the variations of the photoelectric signals during controlled cooling, innovating and validating this new methodology to determine WAT, relatively simple with relation the other applied that involve specific equipments and of high cost. Through the curves you differentiate of the results had been also identified to the critical stages of growth and agglomeration of the crystals that represent to the saturation of the system, indicating difficulties of flow due to the increase of the density
Resumo:
Supported catalysts of CuCl2 on sílica were used in the methane oxychlorination reaction. The materials were synthesized by the ion exchange technique in a basic solution, using a copper-ammonia complex with 3 and 6 % of nominal copper loading. The materials where characterized by thermogravimetry (TG), X-ray Fluorescence Spectroscopy (XRF), Temperature Programmed Reduction (TPR), Scanning Electron Microscopy with X-ray microanalysis (SEM/EDS), BET specific area and pore distribution. The characterization confirms the presence of copper on the support surface, concluding that the ion exchange technique was adequate in the catalyst synthesis. For the reaction test, an oxychlorination bench scale unit was employed. The tests were carried at 673 and 773 K. The results showed the influence of temperature and catalyst copper content on the oxychlorination of methane reaction
Resumo:
PNLEM came out in 2004 and modified the view about schoolbook in Brazil. New perspectives pointed towards constitution of a more critical citizen as of an interdisciplinary and more contextualized teaching, made schoolbook understand these changes.But not always these alterations are checked up on by all means,because what we notice are adaptation of works have already known on market, where texts that are placed reveal environmental, socioeconomic, historical facts or daily phenomenon, or then scientific relevancy examples.We thus offer to analyse contents of chemical thermodynamics and physics for high school which are shown on schoolbook of chemistry and physics validated by PNLEM 2012, now called PNLD, studying the facts if these works bring these scientific sociocultural standpoint as well as their historical context,considering as analysis categories the following criteria: presentation of introduction, content contextualizing,presentation of concepts, thermodynamics historical context, representation in microscopic level and proposal of experiments.Eleven books were analysed,being five of chemistry and six of physics.So was applied a questionnaire with physics and chemistry teachers of high school to have an impression of their opinion about their teaching strategies and about schoolbook.This work grounded in orientations of legal documents about high school in Brazil (LDB,PCN,PCN+,OCEM) and in research on science teaching that regards specifically schoolbook and physics and chemical thermodynamics teaching.Were eleven books in number, only four denoted much coherence with new perspectives for high school, being two of chemistry and two of physics,whose concern about contextualizing and with a much integrated view of science to student s reality,indicating much social and critical character.The rest, when don t overlook,regard cultural and historical,socioeconomic contexts in isolated manner from presented concepts,aside from content