Efeito da estimulação transcraniana por corrente contínua anódica sobre o controle do movimento em para-halterofilistas

Introduction: The sport practiced by people with disabilities has been growing in recent years. Consequently, advances in assessment and training methods have emerged. However, the paralympic sport keeps in tow these advances, with few specific studies that consider disability as intervening factor. The transcranial direct current stimulation (tDCS) is a technique that has proven to be capable of modulating brain function. Studies show beneficial effects of tDCS on muscle strength, power and fatigue during exercise. Objective: Investigate de the effect of tDCS on movement control in para-powerlifters. Methods: Eight subjects underwent two sessions of motion capture, which previously applied the anodic tDCS or sham sessions in the cerebellum. Three movements were performed with increasing load between 90-95% of 1MR. The movements were recorded by an 10 infrared cameras system which reconstructed the 3D trajectory of markers placed on the bar. Results: There have been changes between the anodic and sham conditions over bar level (initial, final, maximum during the eccentric and concentric phase) and in the difference between the final and initial bar level. Moreover, there was difference in bar level (final and during the eccentric phase) comparing athletes amputees and les autres. Conclusion: The findings of this study suggest that tDCS applied prior to the exercise over the cerebellum in para-powerlifters acts differently according to disability

Utilizando a porta paralela para controle remoto de um dispositivo

VALENTIM, R. A. M.; NOGUEIRA, I. A.;ROCHA NETO, A. F. Utilizando a porta paralela para controle remoto de um dispositivo. Revista da FARN, Natal, v. 2, p. 103-114, 2002.

O controle social do judiciário: a experiência do Observatório da Justiça e Cidadania no Estado do Rio Grande do Norte

This dissertation deals with the possibility of build an effective social control of the judiciary Brazilians. The theme was bounded by a cut geographic and secular: the experience of the Center of Justice and Citizenship in the state of Rio Grande do Norte (OJC/RN), which begins formally in august 2003. The research approach and leave of experience in judicial practice and policy specific substrates to theorize about the subject. We collected documents about cases, the judicial diagnoses, reports, news material, in addition to lifting bibliographic. Therefore, it is working with about notions of a democratic state of right in the light of the Brazilian Constitution of 1988, in order to contextualize the insertion of the judicial system, by the prospect of legitimacy, which is considered by a look formal and material. It is a brief analysis of the system of official control of the judiciary (internal and external), is emphasizing its shortcomings functional and its corporate character, which suffers from poor conformation democratic. Then there is a discussion about the need to establish the social control of the judiciary, through the prism of relations of power that are locked in the judiciary, the lack of formal criteria for the guarantee of obtaining the correct judgment (laws, precedents and conscience of the judge), the problems of impunity and justice class, and from the examination of some cases, as the body of search. From this conjuncture, prepares to be an outline of shapes and the limits of social control, consonant the proposal erected in certain sectors of organized civil society, represented by the movement s social OJC. In the end, considerations are made on the legitimacy and constitutionality of OJC

Desenpenho aeróbio e controle autonômico cardíaco em idosas praticantes de tai chi chuan e sedentárias

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Controle adaptativo robusto para um modelo desacoplado de um robô móvel

This thesis presents a new structure of robust adaptive controller applied to mobile robots (surface mobile robot) with nonholonomic constraints. It acts in the dynamics and kinematics of the robot, and it is split in two distinct parts. The first part controls the robot dynamics, using variable structure model reference adaptive controllers. The second part controls the robot kinematics, using a position controller, whose objective is to make the robot to reach any point in the cartesian plan. The kinematic controller is based only on information about the robot configuration. A decoupling method is adopted to transform the linear model of the mobile robot, a multiple-input multiple-output system, into two decoupled single-input single-output systems, thus reducing the complexity of designing the controller for the mobile robot. After that, a variable structure model reference adaptive controller is applied to each one of the resulting systems. One of such controllers will be responsible for the robot position and the other for the leading angle, using reference signals generated by the position controller. To validate the proposed structure, some simulated and experimental results using differential drive mobile robots of a robot soccer kit are presented. The simulator uses the main characteristics of real physical system as noise and non-linearities such as deadzone and saturation. The experimental results were obtained through an C++ program applied to the robot soccer kit of Microrobot team at the LACI/UFRN. The simulated and experimental results are presented and discussed at the end of the text

Controle de posição de uma plataforma plana para captação de radiação solar

This study aims at the design, development and performance evaluation of a flat platform to capture incident solar radiation. The design and implementation of a fuzzy system for the efficient control of the solar tracking movement of the platform are also presented

Controle de posição com restrição à orientação de um Veículo Aéreo Não-Tripulado tipo Quadrirrotor

Quadrotors aircraft are composed by four propellers mounted on four engines on a cross or x disposition, and, in this structure, the engines on the same arm spin in the same direction and the other arm in the opposite direction. By rotating each helix generates vertical upward thrust. The control is done by varying the rotational speed of each motor. Among the advantages of this type of vehicle can cite the mechanical simplicity of construction, the high degree of maneuverability and the ability to have vertical takeoffs and landings. The modeling and control of quadrirrotores have been a challenge due to problems such as nonlinearity and coupling between variables. Several strategies have been developed to control this type of vehicle, from the classical control to modern. There are air surveillance applications where a camera is fixed on the vehicle to point forward, where it is desired that the quadrotor moves at a fixed altitude toward the target also pointing forward, which imposes an artificial constraint motion, because it is not desired that it moves laterally, but only forwards or backwards and around its axes . This restriction is similar to the naturally existing on robots powered by wheels with differential drive, which also can not move laterally, due to the friction of the wheels. Therefore, a position control strategy similar to that used in this type of robot could be adapted for aerial robots like quadrotor. This dissertation presents and discusses some strategies for the control of position and orientation of quadrotors found in the literature and proposes a strategy based on dynamic control of mobile robots with differential drive, called the variable reference control. The validity of the proposed strategy is demonstrated through computer simulations

Efeitos do treinamento de dupla tarefa no controle do equilíbrio dinâmico e estático de idosas pré-frágeis: um estudo piloto

The increasing world population of older individuals has become a subject of growing research for prevention and reversibility of the frailty because it is a major risk factor for the occurrence of falls, especially when it involves everyday situations of dual task. Some rehabilitation programs have already used the methods of dual-task with general exercises for improving gait and postural control, but has been reported that these interventions have little specificity with limited success to improve certain aspects of static and dynamic position during the performance of functional tasks. This study aimed to verify the measures of postural control in a group of elderly women with fragility phenotype after physical therapy intervention program based on dual-task treadmill training. We selected six pre-frail elderly subjects, with a minimum age of 65, female, living in the community and randomly assigned to two groups. The survey was conducted twice a week for 45 minutes, for four weeks. The simple task intervention consisted only in training on a treadmill and the dual task consisted of in treadmill training associated with visual stimuli. The assessments were made with the use of the Berg Balance Scale (BBS) and the Balance Master® computerized posturography, static and dynamically. The effects of retention were observed after one month, using the same instruments earlier used. The results showed a tendency toward improvement or maintenance of the balance after training on a treadmill, especially with respect to static equilibrium. Both groups showed the most notable changes in the variables related to gait, as the length and speed. The BBS scores and the baropodometric variables showed that the experimental group could keep all values similar or better even one month after completion of training unlike the control group. We concluded that the dual-task performance had no additional value in relation to the improvement of balance in general, but we observed that the effectiveness of visual stimulation occurred in the maintenance of short term balancevariables

Controle circadiano e homeostático do sono-virgília em pacientes com acidente vascular encefálico e correlações com a qualidade de vida e o nível de atividade física

The cerebral vascular accident is a neurological dysfunction of vascular origin that leds to development of motor sensibility, cognitive, perceptive and language deficits. Despite the fact that the main sleep disorders in stroke patients are well known, it is still necessary to analyze which mechanisms of regulation of sleep and wakefulness are affected. The objective of this study was to evaluate the changes in the circadian and homeostatic control of sleep-wakefulness in stroke patients and the correlations with quality of life and level of physical activity. The study analyzed 22 stroke patients (55± 12 years old) and 24 healthy subjects (57 ±11 years old). The instruments used in this study were questionnaires on sleep quality, daytime sleepiness, quality of life, physical activity level and the actigraphy. The data were analyzed using the Student `t test, Mann-Whitney test, ANOVA and Spearman's correlation tests. The results showed stability in the sleep-wake circadian expression with changes in the amplitude of the rhythm. However, significant changes were found related to the homeostatic component characterized by increased sleep duration, increased latency, fragmented sleep and lower sleep efficiency. Additional data showed decreased quality of sleep and increased daytime sleepiness, as well as decreased quality of life and level of physical activity. The results indicate that the interaction of circadian and homeostatic control of sleep-wake is compromised and the main reason might be because of the homeostatic component and the lower activity level resulting from the brain damage. Thus, further studies may be developed to evaluate whether behavioral interventions such as increased daytime activity and restriction of sleep during the day can influence the homeostatic process and its relation to circadian component, resulting in improved quality of nocturnal sleep in stroke patients

Uma interface para o controle de robôs móveis por intermédio de gestos

The main objective of this work was to enable the recognition of human gestures through the development of a computer program. The program created captures the gestures executed by the user through a camera attached to the computer and sends it to the robot command referring to the gesture. They were interpreted in total ve gestures made by human hand. The software (developed in C ++) widely used the computer vision concepts and open source library OpenCV that directly impact the overall e ciency of the control of mobile robots. The computer vision concepts take into account the use of lters to smooth/blur the image noise reduction, color space to better suit the developer's desktop as well as useful information for manipulating digital images. The OpenCV library was essential in creating the project because it was possible to use various functions/procedures for complete control lters, image borders, image area, the geometric center of borders, exchange of color spaces, convex hull and convexity defect, plus all the necessary means for the characterization of imaged features. During the development of the software was the appearance of several problems, as false positives (noise), underperforming the insertion of various lters with sizes oversized masks, as well as problems arising from the choice of color space for processing human skin tones. However, after the development of seven versions of the control software, it was possible to minimize the occurrence of false positives due to a better use of lters combined with a well-dimensioned mask size (tested at run time) all associated with a programming logic that has been perfected over the construction of the seven versions. After all the development is managed software that met the established requirements. After the completion of the control software, it was observed that the overall e ectiveness of the various programs, highlighting in particular the V programs: 84.75 %, with VI: 93.00 % and VII with: 94.67 % showed that the nal program performed well in interpreting gestures, proving that it was possible the mobile robot control through human gestures without the need for external accessories to give it a better mobility and cost savings for maintain such a system. The great merit of the program was to assist capacity in demystifying the man set/machine therefore uses an easy and intuitive interface for control of mobile robots. Another important feature observed is that to control the mobile robot is not necessary to be close to the same, as to control the equipment is necessary to receive only the address that the Robotino passes to the program via network or Wi-Fi.

Utilizando a porta paralela para controle remoto de um dispositivo

VALENTIM, R. A. M.; NOGUEIRA, I. A.;ROCHA NETO, A. F. Utilizando a porta paralela para controle remoto de um dispositivo. Revista da FARN, Natal, v. 2, p. 103-114, 2002.