Uma avaliação comparativa de estratégias de arranjos físicos para estaleiros de construção de embarcações metálicas de pequeno porte

The present study aims to analyse, in different levels of demand, what is the best layout strategy to adopt for the small metallic shipbuilding. To achieve this purpose, three simulation models are developed for analyze these production strategies under the positional, cellular and linear layouts. By the use of a simulation tool for compare the scenarios, Chwif and Medina (2010) and Law (2009)´s methodologies were adapted that includes three phases: conception, implementation and analysis. In conception real systems were represented by process mapping according to time, material resources and human resources variables required for each step of the production process. All of this information has been transformed in the cost variable. Data were collected from three different production systems, two located in Natal RN with cellular and positional layouts and one located in Belém-PA with linear layout. In the implementation phase, the conceptual models were converted in computacional models through the tool Rockwell Software Arena ® 13.5 and then validated. In the analysis stage the production of 960 ships in a year vessels were simulated for each layout noting that, for a production of until 80 units positional layout is the most recommended, between 81 and 288 units the cellular layout and more than 289 units the linear layout

Construção das capacidades organizacionais de tecnologia da informação no contexto dos sistemas institucionais integrados de gestão da UFRN

The IT capability is a organizational ability to perform activities of this role more effectively and an important mechanism in creating value. Its building process (stages of creation and development) occurs through management initiatives for improvement in the performance of their activities, using human resources and IT assets complementary responsible for the evolution of their organizational routines. This research deals with the IT capabilities related to SIG (integrated institutional management systems), built and deployed in UFRN (Universidade Federal do Rio Grande do Norte) to realization and control of administrative, academic and human resources activities. Since 2009, through cooperative agreements with federal and educational institutions of direct administration, UFRN has supported the implementation of these systems, currently involving more than 30 institutions. The present study aims to understand how IT capabilities, relevant in the design, implementation and dissemination of SIG, were built over time. This is a single case study of qualitative and longitudinal nature, performed by capturing, coding and analysis from secondary data and from semi-structured interviews conducted primarily with members of Superintenência de Informática, organizational unit responsible for SIG systems in UFRN. As a result, the technical, of internal relationship and external cooperation capabilities were identified as relevant in the successful trajectory of SIG systems, which have evolved in different ways. The technical capacity, initiated in 2004, toured the stages of creation and development until it reached the stage of stability in 2013, due to technological limits. Regarding the internal relationship capability, begun in 2006, it toured the stages of creation and development, having extended its scope of activities in 2009, being in development since then. Unlike the standard life cycle observed in the literature, the external cooperation capability was initiated by an intensity of initiatives and developments in the routines in 2009, which were decreasing to cease in 2013 in order to stabilize the technological infrastructure already created for cooperative institutions. It was still identified the start of cooperation in 2009 as an important event selection, responsible for changing or creating trajectories of evolution in all three capacities. The most frequent improvements initiatives were of organizational nature and the internal planning activity has been transformed over the routines of the three capabilities. Important resources and complementary assets have been identified as important for the realization of initiatives, such as human resources technical knowledge to the technical capabilities and external cooperation, and business knowledge, for all of them, as well as IT assets: the iproject application for control of development processes, and the document repository wiki. All these resources and complementary assets grew along the capacities, demonstrating its strategic value to SINFO/UFRN

O city marketing em Natal/RN e a construção da imagem da cidade

The growing importance of tourism in overall economic activity worldwide has favored the intensification of competition among cities that seek to create environments attractive to tourists and potential investors. It has been common practice to import characteristics of the business environment in the public management of cities. The city marketing is a key tool used by public leaders to promote a linkage between the tourism image and urban image and involves, in addition to promoting the image of the city, the planning of interventions in urban space, trying to formulate a positive image of the city able to facilitate the deployment of capital. This research seeks to understand the nature of city marketing as part of contemporary urban management and analyzes how is its application in decisions concerning the promotion of tourism in Natal/RN. The approach of this research is qualitative, exploratory and descriptive, in which respondents were the main leaders of two of the official tourism site, the Empresa Potiguar de Promoção Turística and the Secretaria Municipal de Turismo e Desenvolvimento Econômico. It was found that there is a strong articulation of public power with private enterprise in the design and conduct of the actions of urban marketing, that from the survey data show that the behavior of target markets provide guidelines for taking strategic decisions relating to tourism. Sun and sea are some key elements explored to form the image of Natal and to authorize the sale of the city as a tropical paradise. However, there is an increase in the diversification of tourism products, seeking to increase flow to the segments of ecotourism, adventure, business and culture. It s also growing the use of local culture as a tourism product, however, the cultural representation focuses on superficial values and does not bring to light the social and historical richness that the city has. Public authorities use the city marketing strategies as a means able to maximize the attractiveness of Natal urban space to investors, business groups and tourists. It can be observed that urban managers seek solutions that can continuously increase the tours, which often manifests in interventions that focus the tourist areas of the city, in oposition of those who do not contribute to a positive reading of the city, which ultimately generate the worsening of spacial and social inequalities

Aqui o nativo é o caboclo... : O processo de construção da identidade cabocla em Mirandas/RN

Ce travaille de dissertation (Master) est le résultat de trois ans de travaille auprès de Mirandas, endroit situé à 22 kilomètres de la ville de Caraúbas, région ouest de l Etat du Rio Grande do Norte. Pendant cette période, on a compris que les habitants de Mirandas se identifient et sont identifiés pour les autres comme des caboclos , catégorie de classification que dans le discours courant, soit à Mirandas ou dans la siège de la municipalité, a des rapports avec la vision que les tous premiers habitants de Mirandas sont venus de la ville du Cabo , dans l Etat de Pernambuco. Et pourtant ; l usage qu a été fait de cette version a fini pour cacher des éléments qui ont défini l identité de Mirandas, tel comme la probable descendance indigène que parfois est actionnée dans les narratives qui montrent des rapports entre les portugais et des femmes indiens qu ont été pris à casco de cavalo (cheval) . (MACÊDO, 2010; CAVIGNAC, 2003). Donc, cette ethnographie porte à la lumière des éléments que sont utilisés pour les mirandenses pour définir leur identité. Cette identité peut être bien visualisé a partir des éléments que les caboclos font des signes diacritiques (BARTH, 1998; OLIVEIRA, 1976), bien comme des rapports établis entre les habitants de Mirandas et ces de Caraúbas. Des rapports qui ont rendu possible les manifestations d affinité et de conflits et que, donc, nous aide à entendre comme cette identité se réactualise dans ces rapports d union et opposition que les mirandenses construisent avec les caraubenses. Cela arrive dans les rapports territoriaux, économiques et de façon plus marquante, dans les rapports religieux.

Arte, prazer e bisturi: construção corporal através da body modification

In view of a field research carried out by a team connected to the universe of body modification, it is possible to discern some uses and meanings linked to these forms of body interventions. Body modification or body change is part of the circuit of piercings and tattoos, although they are socially less thinned and more extreme, like scarifications, subcutaneous implants, bifurcated tongues, surfaces and body suspensions. The aim of this paper is to cast an anthropological glance on these practices, joining at the same context all the subjects involved with these techniques, placing them inside the same relational focus and capturing their journeys and trajectories. The discussions are concentrated on the notion of body building and urban life style. Ideas as personal distinctness and prestige imitation are also present in this universe, as well as matters attached to genre, pleasure, art, and to the so-called alternative circuit . This way, the ethnography so far presented here, reveals the complex and contemporaneous character of these practices of body markings in which the body appears as the central element in the experiences of the subjects of this study

Projeto em Áreas Consolidadas de Patrimônio Cultural: Propostas para a Construção de uma Metodologia de Ensino

Le thème du patrimoine culturel architectural et urbain continue d avoir une place importante dans le milieu technique et scientifique. Le concept s est élargi et aujourd hui comprend différentes procédures de projets d intervention. L importance accordée au thème amène à l inclusion de la matière de techniques rétrospectives et aux contenus qui en sont liés: conservation, restauration, restructuration et reconstruction d édifices et ensembles urbains, dans les parcours des cours d architecture et d urbanisme au Brésil établies par le Ministère de l Education Nationale (MEC) dans les années quatre-vingt-dix, postérieurement incorporés dans les directrices disciplinaires nationales. Nous partons des discussions théoriques et conceptuelles du Domaine du Patrimoine Culturel, ainsi que des principales théories pédagogiques d enseignements et d apprentissage articulées au projet. Dans ce contexte les objectifs principaux de cette thèse consistent à systématiser et à analyser les principales procédures méthodologiques contribuant pour la construction de méthodes d enseignement tournée vers des activités pratiques dans ce domaine. Pour cela, la recherche a été systématisée dans une approche à deux niveaux. En ce qui concerne le premier, basé sur des données secondaires, neuf cours d architecture et urbanisme ont étés identifiés entre institutions publiques d enseignement supérieur dont huit brésiliennes et une française, considérées représentatives en ce qui concerne les pratiques d enseignement de projet et de patrimoine culturel. Trente disciplines dédiées à la matière ont été également reconnues initialement, et postérieurement, cinq disciplines qui possèdent un emploi du temps dédié à la pratique de projet ont aussi été reconnues. Dans le deuxième cas, basée sur des données primaires, ont étés analysées les méthodologies et les stratégies d enseignement de projet basées sur les définitions des matières et des autres éléments des plans de travail avec des observations, des entrevues et des questionnaires en trois ateliers. Par rapport aux résultats nous avons constaté que toutes les écoles possèdent les contenus de la matière, mais peu d entre elles privilégient la relation du projet appliqué au patrimoine culturel. Nous avons constaté que les questions des projets dans ce contexte, même s elles sont considérées complexes, ont privilégié le listage et l analyse du site. L atelier qui intègre les fondements des théories de préservation, l histoire de l architecture et urbanisme et techniques anciennes et actuelles, est mis en valeur comme un modèle cohérent avec les propositions d intégration des connaissances théoriques et pratiques du projet appliqué à la discipline. Basé sur ces constatations il est possible de démontrer quatre étapes du projet appliqué au patrimoine culturel: 1ª) les fondements généraux qui concernent les bases théoriques sur la préservation, histoire et technique rétrospective, par exemple, l appropriation de lois et normes et la sensibilisation de l élève sur les questions de patrimoine culturel; 2ª) le contacte avec la réalité qui inclut l appropriation du problème à partir de ces acteurs, de ces échelles, de cette lecture de site et l analyse de l objet d étude; 3ª) le développement de la proposition qui inclut programmes (fonctions existantes et propositions), définitions du partit (types d intervention), conception (hypothèse et discussion) et définition de proposition; 4ª) la finalisation du projet qui consiste à développer la proposition avec sa représentation graphique et sa présentation finale. Nous concluons que le projet en Domaine du Patrimoine Culturel demande une attention spéciale et doit être présent dans les cursus considérant les principes généraux nécessaires à la formation de l élève. Le binôme projet / patrimoine signifie avoir dans le cursus universitaire les contenus et questions nécessaires les connaissances, les variables et possibilités existantes dans le projet appliqué au patrimoine culturel de façon à ce que ces connaissances soient incorporées dans l exercice de projet et n apparaissent pas comme un simple contenu théorique sans articulation avec la pratique. Naturellement ces conclusions n épuisent pas la réflexion sur la question. Nous espérons que les analyses faites contribuent à définir des méthodologies d enseignements capables d êtres vérifiées et testées dans la pratique en salle de cours, et puisse collaborer avec les nouvelles recherches surtout celles qui ont pour but des nouvelles théories pédagogiques d enseignement apprentissage du projet en Domaine du Patrimoine Culturel

Plano setorial: a construção de estratégias para implementação do plano diretor de Natal

The Sectoral Plan was inserted as an urban instrument in Master Plan of Natal (LC82/07), since then it has been deepened. It is guided to the equitable distribution of the benefits of urbanization, aimed the efetivation of the Right to the City and the Environmental function of property in the context of urban planning. Thereby, the Sectoral Plan was inserted into the perspective of promoting a favorable field for applying articulated of instruments defined in the Master Plan, and them with urban interventions, through the deepening of macrozoning - coming out of dimension of the city and going to a small fraction of the urban by reducing scaling - facilitating democratic management in accordance with the City Statute. However, the absence of regulation and the conceptual and operational fragility of the instrument, approached it of other existent experiences and instruments, limiting its application and evaluation. Considering the innovative nature of the instrument and the intense social participation, we inquire about conceptual and operational elements which could give greater effectiveness to Sector Plan in construction? Guided by that question, this dissertation aim to understand the nature and operational procedures of Sectoral Plan, seeking to do indications about the conceptual and operational aspects of implementing a Sector Plan. The neighborhood of Ponta Negra was selected as empirical universe because it was the first sector defined in the Master Plan. This research adopts reference authors who´s make reflection and insights about the matrix of Urban Reform, whose principles constitute the basis of the trajectory of revision of urban planning in Brazil since the 1980s, highlighting Raquel Rolnik, Nelson Saule Júnior and Orlando Alves dos Santos Júnior. For the local monitoring, we use the authors Alexsandro Ferreira Cardoso Silva, Rosa Maria Pinheiro Oliveira e Marise Costa da Souza Duarte, in order to understand the growth dynamics of Natal, lawfully and urbanistically

Dos caminhos de água aos caminhos de ferro: a construção da hegemonia de Natal através das vias de transporte (1820-1920)

At a time of changes on the territory during the 19th century, the political and socioeconomic elites of the province and later State of Rio Grande do Norte evolved a discourse in order to justify the permanence of Natal as a city holding a status of capital. In this work we analyze the means employed by the ruling classes to impose their wish to raise Natal to an outstanding position among the existing cities by intervening on the territory during a period of one hundred years (1820-1920). During that time, which was characterized by changing commercial flows and technological development, the elites interventions were essentially directed to the implementation of modes of transportation, especially the railway. We try to understand the reinforcement of Natal as a capital city not only in political and administrative terms, but mainly in a commercial and symbolic manner, through the discourse and interventions undertaken by the local administrative elites, who stimulated the creation of a set of relations on the territory that also imprinted visible marks in the capital s urban fabric. These interventions were based upon the establishment of an infrastructure for exporting the State s production, firstly through and despite the Potengi River, and later on by the construction of railways. Although the project of Natal s hegemony had been outlined before the establishment of the railway network, in both cases the ultimate objective was to reinforce and develop the capital city as a commercial urban center to the detriment of other cities

Paisagem, um patrimônio esquecido: subsídios para a construção de uma metodologia de valoração e proteção do cenário natural litorâneo

The so-called "residential tourism" came to intensify the previous occupation of the coastal zones, characterized by traditional beach houses, and brought significant consequences for their spatial configuration, and especially for its scenic value of the landscape. Although there is the intention to regulate the activities of enterprising groups by some legal instruments to control the use and occupation of land, and to contain some negative effects, the actions of government are still inefficient in trying to follow the implications on the landscape from the accelerated growth of the real estate and touristic sectors. Supported in the speech of economic development and income generation, public managers prioritize areas to attract tourists to the detriment of preserving important physical attributes of the natural environment that contribute significantly to the quality of life. The result can be noticed in the use of natural elements as one of the major components in the land valorization, and in the immediate attraction of investors and enterprising. Therefore, the objective of this work is to contribute to the debate on the landscape preservation a little detailed thematic in view of their relevance in the current context - by indicating subsidies to the creation of a methodology for the evaluation and protection of coastal zones that may assist the government in creating new instruments, and better prepare it in control of the occupation of these areas. For such, was followed two ways to analysis: the indirect method and the direct method. The first is grounded in the evaluation of landscape attributes, which is based on the work of Raquel Tardin (2008) and Eduardo Cuesta, Encarnación Algarra and Isabel Pastor (2001). The second, based on the research of Leticia and Carlos Hardt (2010) and on the concepts of phenomenology - expressed by Antonio Christofoletti (1985) and Yi-Fu Tuan (1983) - considers the population perspective on the quality of the natural scenery. Developed through cartographic materials, photographic collections and quantitative tables, this dissertation utilized as a case study the beaches of Barra de Tabatinga and Camurupim, located in the city of Nísia Floresta/RN. Despite already being sighted spaces of advanced stage of landscape degradation in these locations, areas of remarkable scenic value can still be found, what reinforce the urgency in adopting preservationists actions. The absence of laws focused on the management and protection of the landscape singularities associated with the inefficiency of the government to invigilate the land occupation in coastal zones, encourage the excessive action of the real estate-tourism, and consequently make the government the main responsible for the environmental and landscape impacts in these areas - by its omission or by their connivance. Therefore, the legislation permeates this entire process and constitutes itself as the most effective way to guarantee the right to the landscape to present and future generations. Are also pointed some important considerations to build a methodology, especially concerning possibilities of improvements and adaptations of its applicability in each case

Cravo do canavial: "entre" o maracatu rural e a mímesis corpórea: a construção de uma dramaturgia cênica

The present dissertation has begun with an investigation about the application of the Technique of the Corporeal Mimesis, systematized by the Lume, Interdisciplinary Center for Theatrical Research of Unicamp, associated with the matrix of Rural Maracatu, specifically of the group Cambinda Brasileira (Nazaré da Mata PE), with the purpose of promote the training and the composition work of the actor. Starting from an empirical methodology, which used the analysis of practical experiences the application process of the Corporeal Mimesis and the construction of a theater play associated with bibliographical research, I could investigate possible ways of re-signification of this technique, using components related to the ritual and the game present in the popular event in question, and experience such paths through the conception of the play Cravo do Canavial

Leitora-criadora: a experiência situada na construção dramatúrgica

This study has the purpose of investigating the term reader-creator , on the textual aspects of the dramatical works A Morte nos Olhos , A Memória Ferida and Na Outra Margem (2010) by Antonia Pereira Bezerra. In this sense, we propose an analysis of these works based on author‟s life experience as creative matter for a autofictional narrative, highlighting the relations between the autobiographical elements (LEJEUNE, 2008; DOSSE, 2009) and fictional elements in the construction of dramatic narratives. The theoretical analysis pervades the studies fields of Reception Aesthetics (ISER, 1996), memory (RICOUER, 2007) and narrative (RICOEUR, 2010), evidencing the relation between the author and the pursuit of her memories and life experiences, the matter to elaboration of writing. Then we intend thinking a reader-creator of herself, that at the same time she seeks in her memories the biographic aspects to her narrative, she converts this reality with the insertion of fictional elements from the imagination (SARTRE, 2008)

Construção de modelos de interação in silico e in vitro do inibidor do tipo Kunitz de Adenanthera pavonina L. para as enzimas cisteínicas e serínicas

Serines proteinases inhibitors (PIs) are widely distributed in nature and are able to inhibit both in vitro and in vivo enzymatic activites. Seed PIs in than leguminous are classified in seven families, Bowman-Birk and Kunitz type families that most studied representing an important role in the first line of defense toward insects pests. Some Kunitz type inhibitors possess activities serine and cysteine for proteinases named bifunctional inhibitor, as ApTKI the inhibitor isolate from seed of Adenanthera pavonina. The A. pavonina inhibitor presenting the uncommon property and was used for interaction studies between proteinases serine (trypsin) and cysteine (papain). In order to determinate the in vitro interaction of ApTKI against enzymes inhibitor purification was carried cut by using chromatographic techniques and inhibition assays. The 3D model of the bifunctional inhibitor ApTKI was constructed SWISS-MODEL program by homology modeling using soybean trypsin inhibitor (STI, pdb:1ba7), as template which presented 40% of identity to A. pavonina inhibitor. Model quality was evaluated by PROCHECK program. Moreover in silico analyzes of formed complex between the enzymes and ApTKI was evaluated by HEX 4.5 program. In vitro results confirmed the inhibitory assays, where the inhibitor presented the ability to simultaneously inhibit trypsin and papain. The residues encountered in the inhibitor model of folder structural three-dimensional that make contact to enzymes target coud explain the specificity pattern against serine and cysteine proteinases

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min