Estimating post-release survival and the influential factors for recreationally caught Black Bream (Acanthopagrus butcheri) in the Glenelg River, south eastern Australia

Black bream (Acanthopagrus butcheri) is the main target species amongst the estuarine recreational fisheries of Victoria, Australia. The A. butcheri fishery is managed through legal-minimum length and daily bag limits. The success of this management strategy requires that the survival rate for released fish is high. This study used the most common angling practices to estimate post-release survival and identify influential factors for undersized A. butcheri in Victoria. In total 1557 and 923 A. butcheri were caught and monitored for initial (≤1 h) and delayed (72 h) survival, respectively. Fish were caught across 3 years, with each year separated into cold and warm water periods with 8 fishing trial days in total. Only 1 of the 266 controls used to assess confinement effects died. Total survival was 95% (S.E. ± 0.8%) for shallow- and 74% (S.E. ± 3%) for deep-hooked fish and decreased as fish length increased. A post-mortem (PM) procedure was developed and showed that throat and gill injuries were the most frequent cause of deep-hooking death. It revealed that 97% of hooks left in fish remained there after 72 h and identified hooking location inaccuracies recorded at the time of capture. Total survival for deep-hooked fish was 20% higher when hooks were left in the fish. Deep-hooked fish were more likely to bleed when hooks were removed and total survival was lower for fish that bleed (58%) than fish that did not bleed (80%). Shallow-hooking rates decreased as fish length increased and were higher during warm water compared to cold water trials. The high shallow-hooking and survival rates observed suggest that A. butcheri survival in the fishery would be high, but deep-hooking has the potential to undermine the management strategy. Determining the shallow-hooking rate in the fishery would help clarify the impact of these findings at the fishery level.

Controlled release of bioactive chemicals

This project has been concerned with the development of controlled release formulations of the herbicide atrazine and the pesticide chlorpyrifos. The results of both chemical and biological evaluation show that these controlled release formulations can significantly reduce leaching and therefore ground water pollution of atrazine without losing herbicidal potency in the early stages after application.

Evaluation of chlorine decay kinetics expressions for drinking water distribution systems modelling

The decay of chlorine in drinking water involves a complex set of reactions that is usually simplified to first order kinetics in models of water quality in distribution systems. However, to be useful in optimising chlorine dosing regimes, the kinetics expression should accurately describe the shape of the chlorine decay curve for different chlorine doses and be able to simulate re-chlorination. After considering the nature of the reactions involved in chlorine decay, five simplified reaction schemes were evaluated for their suitability to describe chlorine concentration in bulk water. Each scheme was fitted to a sample of experimental data of chlorine decay in raw water obtained from Warragamba Dam (the major source of water supplied to Sydney, Australia). A scheme involving two parallel reactions of organic carbon compounds with chlorine is both necessary and sufficient to satisfy the requirements of modelling chlorine decay accurately.

Birch pollen rupture and the release of aerosols of respirable allergens

Backgound Birch pollen allergens have been implicated as asthma triggers; however, pollen grains are too large to reach the lower airways where asthmatic reactions occur. Respirable-sized particles containing birch pollen allergens have been detected in air filters, especially after rainfall but the source of these particles has remained speculative.

Objective To determine the processes by which birch pollen allergens become airborne particles of respirable size with the potential to contribute to airways inflammation.

Methods Branches with attached male catkins were harvested and placed in a controlled emission chamber. Filtered dry air was passed through the chamber until the anthers opened, then they were humidified for 5 h and air-dried again. Flowers were disturbed by wind generated from a small electric fan. Released particles were counted, measured and collected for immuno-labelling and high-resolution microscopy.

Results Birch pollen remains on the dehisced anther and can rupture in high humidity and moisture. Fresh pollen takes as long as 3 h to rupture in water. Drying winds released an aerosol of particles from catkins. These were fragments of pollen cytoplasm that ranged in size from 30 nm to 4 μm and contained Bet v 1 allergens.

Conclusion When highly allergenic birch trees are flowering and exposed to moisture followed by drying winds they can produce particulate aerosols containing pollen allergens. These particles are small enough to deposit in the peripheral airways and have the potential to induce an inflammatory response.

Meteorological influences on respirable fragment release from Chinese elm pollen

Exposure to airborne pollen from certain plants can cause allergic disease, leading to acute respiratory symptoms. Whole pollen grains, 15–90 μ m-sized particles, provoke the upper respiratory symptoms of rhinitis (hay fever), while smaller pollen fragments capable of depositing in the lower respiratory tract have been proposed as the trigger for asthma. In order to understand factors leading to pollen release and fragmentation we have examined the rupture of Chinese elm pollen under controlled laboratory conditions and in the outdoor atmosphere. Within 30 minutes after immersion in water, 70% of fresh Chinese pollen ruptures, rapidly expelling cytoplasm. Chinese elm flowers, placed in a controlled atmosphere chamber, emitted pollen and pollen debris after a sequential treatment of 98% relative humidity followed by drying and a gentle disturbance. Immunologic assays of antigenic proteins specific to elm pollens revealed that fine particulate material (D p < 2 μ m) collected from the chamber contained elm pollen antigens. In a temporal study of the outdoor urban atmosphere during the Chinese elm bloom season of 2004, peak concentrations of pollen and fine pollen fragments occurred at the beginning of the season when nocturnal relative humidity (RH) exceeded 90%. Following later periods of hot dry weather, pollen counts decreased to zero. The Chinese elm pollen fragments also decreased during the hot weather, but later displayed additional peaks following periods of more moderate RH and temperature, indicating that pollen counts underestimate total atmospheric pollen allergen concentrations. Pollen fragments thus increase the biogenic load in the atmosphere in a form that is no longer recognizable as pollen and, therefore, is not amenable to microscopic analysis. This raises the possibility of exposure of sensitive individuals to pollen allergens in the form of fine particles that can penetrate into the lower airways and pose potentially severe health risks.

Suitability of chlorine bulk decay models for planning and management of water distribution systems

Effective disinfection planning and management in large, complex water distribution systems requires an accurate network water quality model. This model should be based on reaction kinetics, which describes disinfectant loss from bulk water over time, within experimental error. Models in the literature were reviewed for their ability to meet this requirement in real networks. Essential features were identified as accuracy, simplicity, computational efficiency, and ability to describe consistently the effects of initial chlorine dose, temperature variation, and successive rechlorinations. A reaction scheme of two organic constituents reacting with free chlorine was found to be necessary and sufficient to provide the required features. Recent release of the multispecies extension (MSX) to EPANET and MWH Soft's H2OMap Water MSX network software enables users to implement this and other multiple-reactant bulk decay models in real system simulations.

Encapsulation of hydrophobic phthalocyanine with poly(N-isopropylacrylamide)/lipid composite microspheres for thermo-responsive release and photodynamic therapy

Phthalocyanine (Pc) is a type of promising sensitizer molecules for photodynamic therapy (PDT), but its hydrophobicity substantially prevents its applications. In this study, we efficiently encapsulate Pc into poly(N-isopropylacrylamide) (pNIPAM) microgel particles, without or with lipid decoration (i.e., Pc@pNIPAM or Pc@pNIPAM/lipid), to improve its water solubility and prevent aggregation in aqueous medium. The incorporation of lipid molecules significantly enhances the Pc loading efficiency of pNIPAM. These Pc@pNIPAM and Pc@pNIPAM/lipid composite microspheres show thermo-triggered release of Pc and/or lipid due to the phase transition of pNIPAM. Furthermore, in the in vitro experiments, these composite particles work as drug carriers for the hydrophobic Pc to be internalized into HeLa cells. After internalization, the particles show efficient fluorescent imaging and PDT effect. Our work demonstrates promising candidates in promoting the use of hydrophobic drugs including photosensitizers in tumor therapies. © 2014 by the authors.

Rational design of monolayers for improved water evaporation mitigation

Seven chemically designed monolayer compounds were synthesized and investigated with comparison to the properties and water evaporation suppression ability of 1-hexadecanol and 1-octadecanol. Increasing the molecular weight and polarity of the compound headgroup drastically altered the characteristics and performance of the monolayer at the air/water interface. Contrary to the common expectation the monolayer's lifetime on the water surface decreased with increasing number of ethylene oxy moieties, thus optimal performance for water evaporation suppression was achieved when only one ethylene oxy moiety was used. Replacing the hydroxyl headgroup with a methyl group and with multiple ethylene oxy moieties resulted in a loss of suppression capability, while an additional hydroxyl group provided a molecule with limited performance against water evaporation. Theoretical molecular simulation demonstrated that for exceptional performance, a candidate needs to possess a high equilibrium spreading pressure, the ability to sustain a highly ordered monolayer with a stable isotherm curve, and low tilt angle over the full studied range of surface pressures by simultaneously maintaining H-bonding to the water surface and between the monolayer chains.

An investigation of effects of modification processes on physical properties and mechanism of drug release for sustaining drug release from modified rice

The aim of this study was to investigate the effect of modification processes on physical properties and explain the mechanism of sustained drug release from modified rice (MR). Various types of Vietnamese rice were introduced in the study as the matrices of sustained release dosage form. Rice was thermally modified in water for a determined temperature at different times with a simple process. Then tablets containing MR and isradipine, the model drug, were prepared to investigate the capability of sustained drug release. Scanning electron microscopy (SEM) was used to determine different morphologies between MR formulations. Flow property of MR was analyzed by Hausner ratio and Carr's indices. The dissolution rate and swelling/erosion behaviors of tablets were evaluated at pH 1.2 and pH6.8 at 37±0.5°C. The matrix tablet containing MR showed a sustained release as compared to the control. The SEM analyses and swelling/erosion studies indicated that the morphology as well as swelling/erosion rate of MR were modulated by modification time, drying method and incubation. It was found that the modification process was crucial because it could highly affect the granule morphologies and hence, leading to the change of flowability and swelling/erosion capacity for sustained release of drug.

Development of a sustained release solid dispersion using swellable polymer by melting method

PURPOSE: This study is to design a sustained release solid dispersion using swellable polymer by melting method. METHODS: Polyethylene glycol 6000 (PEG 6000) and hydroxypropyl methylcellulose 4000 (HPMC 4000) were used in solid dispersion for not only enhancing drug dissolution rate but also sustaining drug release. HPMC 4000 is a common swellable polymer in matrix sustained release dosage form, but could not be used in preparation of solid dispersion by melting method. However, the current study utilized the swelling capability of HPMC 4000 accompanied by the common carrier PEG 6000 in solid dispersion to accomplish the goal. RESULTS: While PEG 6000 acted as a releasing stimulant carrier and provided an environment to facilitate the swelling of HPMC 4000, this swellable polymer could act as a rate-controlling agent. This greatly assisted the dissolution enhancement by changing the crystalline structure of drug to more amorphous form and creating a molecular interaction. CONCLUSIONS: These results suggested that this useful technique can be applied in designing a sustained release solid dispersion with many advantages.

A new method for resolving uncertainty of energy requirements in large water breathers: The 'mega-flume' seagoing swim-tunnel respirometer

Body size is a key determinant of metabolic rate, but logistical constraints have led to a paucity of energetics measurements from large water-breathing animals. As a result, estimating energy requirements of large fish generally relies on extrapolation of metabolic rate from individuals of lower body mass using allometric relationships that are notoriously variable. Swim-tunnel respirometry is the 'gold standard' for measuring active metabolic rates in water-breathing animals, yet previous data are entirely derived from body masses <10 kg - at least one order of magnitude lower than the body masses of many top-order marine predators. Here, we describe the design and testing of a new method for measuring metabolic rates of large water-breathing animals: a c. 26 000 L seagoing 'mega-flume' swim-tunnel respirometer. We measured the swimming metabolic rate of a 2·1-m, 36-kg zebra shark Stegostoma fasciatum within this new mega-flume and compared the results to data we collected from other S. fasciatum (3·8-47·7 kg body mass) swimming in static respirometers and previously published measurements of active metabolic rate measurements from other shark species. The mega-flume performed well during initial tests, with intra- and interspecific comparisons suggesting accurate metabolic rate measurements can be obtained with this new tool. Inclusion of our data showed that the scaling exponent of active metabolic rate with mass for sharks ranging from 0·13 to 47·7 kg was 0·79; a similar value to previous estimates for resting metabolic rates in smaller fishes. We describe the operation and usefulness of this new method in the context of our current uncertainties surrounding energy requirements of large water-breathing animals. We also highlight the sensitivity of mass-extrapolated energetic estimates in large aquatic animals and discuss the consequences for predicting ecosystem impacts such as trophic cascades.

Evaluating the usefulness of continuous leaf turgor pressure measurements for the assessment of Persimmon tree water status

Continuous plant water status monitoring is crucial in order to improve irrigation management. The noninvasive Yara ZIM-probe was assessed for detecting plant water stress in Persimmon trees (Diospyros kaki L.f.). The probe measures the pressure transfer function (Pp) through a patch of an intact leaf, which is inversely correlated with the turgor pressure. This technology was evaluated in two parallel experiments involving either distinct watering regimes or rootstocks with different drought tolerance [Diospyros lotus (L) and Diospyros virginiana (V)]. Concomitant measurements of midday stem water potential (Ψstem) and trunk diameter variations were taken throughout the experiments. Pp was highly correlated with Ψstem. Persimmon leaves exhibited the inversed Pp curve phenomena under water stress, which enabled the association of a particular range of Ψstem to each of the three leaf turgor states defined. Persimmon trees with no sign of initial or total inversion ensured Ψstem above −0.8 MPa, values considered of a well-watered Persimmon tree. Yara ZIM-probe readings as well as Ψstem and trunk diameter variation measurements pointed L as a more sensitive rootstock to drought than V. In conclusion, results showed that the Yara ZIM-probe can be used to continuously monitor water status in Persimmon trees although further research would be needed to ensure their feasibility for scheduling irrigation.