Investigating information systems analysts' possession of tacit organisational knowledge

Outsourcing of Information Technology (IT) services which are central to business strategy may be risky. Managers have made the outsourcing decision both to concentrate financially on the core competencies and to rid themselves of a troublesome and cost inefficient department. More recent research has, however, cast doubt on the promises of huge savings. In this paper, we consider the likelihood that outsourcing may lead to the loss of organisational knowledge - that organisations outsourcing their total Information Systems operations may also have lost irreplaceable tacit, cross-functional knowledge which subsisted within the minds of the professional systems analysts. The findings of our research revealed that expert systems analysts possess a unique organisational understanding and draw on this knowledge to operate efficiently in their environment. We present a model that will allow future researchers to build on our findings and examine whether outsourcing can lead to a loss of organisational memory.

Effect of feeding systems on omega-3 fatty acids, conjugated linoleic acid and trans fatty acids in Australian beef cuts: potential impact on humnan health

The influence of feeding systems on the levels of functional lipids and other fatty acid concentrations in Australian beef was examined. Rump, strip loin and blade cuts obtained from grass feeding, short-term grain feeding (80 days; STGF) and long-term grain feedlot rations (150-200 days; LTFL) were used in the present study. The typical Australian feedlot ration contains more than 50% barley and/or sorghum and balanced with whole cottonseed and protein meals were used as feed for STGF and LTFL regimens. Meat cuts from 18 cattle for each feeding regimen were trimmed of visible fat and  connective tissue and then minced (300 g lean beef); replicate samples of 7g were used for fatty acid (FA) analysis. There was a significantly higher level of total omega-3 (n-3) and long chain n-3 FA in grass-fed beef (P <0.0001) than the grain-fed groups regardless of cut types. Cuts from STGF beef had significantly reduced levels of n-3 FA and conjugated linoleic acid (CLA) and similar levels of saturated, monounsaturated and n-6 FA compared with grass feeding (P <0.001). Cuts from LTFL beef had higher levels of saturated, monounsaturated, n-6 FA and trans 18:1 than similar  cuts from the other two groups (P <0.01), indicating that increased length of grain feeding was associated with more fat deposited in the carcass. There was a step-wise increase in trans 18:1 content from grass to STGF to LTGF, suggesting grain feeding elevates trans FA in beef, probably because of increased intake of 18:2n-6. Only grass-fed beef reached the target of more than 30mg of long chain n-3 FA/100 g muscle as recommended by Food Standard Australia and New Zealand for a food to be considered a source of omega- 3 fatty acids. The proportions of trans 18:1 and n-6 FA were higher (P<0.001) for both grain-fed beef groups than grass-fed beef. Data from the present study show that grain feeding decreases functional lipid  components (long chain n-3 FA and CLA) in Australian beef regardless of meat cuts, while increasing total trans 18:1 and saturated FA levels.

Variation in age and physical status prior to total knee and hip replacement surgery : a comparison of centers in Australia and Europe

Objective : To investigate whether variation exists in the preoperative age, pain, stiffness, and physical function of people undergoing total knee replacement (TKR) and total hip replacement (THR) at several centers in Australia and Europe.
Methods : Individual Western Ontario and McMaster Universities Osteoarthritis Index data (range 0-100, where 0 = best and 100 = worst) collected within 6 weeks prior to primary TKR and THR were extracted from 16 centers (n = 2,835) according to specified eligibility criteria. Analysis of covariance was used to evaluate differences in pain, stiffness, and physical function between centers, with adjustment for age and sex.
Results : There was marked variation in the age of people undergoing surgery between the centers (TKR mean age 67-73 years; F[6,1004] = 4.21, P < 0.01, and THR mean age 63-72 years; F[14,1807] = 7.27, P < 0.01). Large differences in preoperative status were observed between centers, most notably for pain (TKR adjusted mean pain 52.5-61.1; F[6,1002] = 4.26, P < 0.01, and THR adjusted mean pain 49.2-65.7; F[14,1802] = 8.44, P < 0.01) and physical function (TKR adjusted mean function 52.7-61.4; F[6,1002] = 5.27, P < 0.01, and THR adjusted mean function 53.3-71.0; F[14,1802] = 6.71, P < 0.01). Large effect sizes (up to 0.98) reflect the magnitude of variation between centers and highlight the clinical relevance of these findings.
Conclusion : The large variations in age and preoperative status indicate substantial differences in the timing of joint replacement across the centers studied, with potential for compromised surgical outcomes due to premature or delayed surgery. Possible contributing factors include patient preferences, the absence of concrete indications for surgery, and the capacity of the health care systems.

Management of cardiovascular diseases with micro systems and nanotechnology

Cardiovascular diseases are the leading cause of death and morbidity in industrialized nations and are becoming an urgent health problem for all nations due to the unstoppable trend of an ageing and obese population. Due to the rapid development of micro total analysis systems (μTAS) and nanotechnology in recent years, they will play an important role in the diagnosis, management, and therapy of cardiovascular diseases. It is envisaged that the micro and nanotechnologies developed for treating other diseases shall be explored for cardiovascular applications to reduce the research effort required for commercializing the devices and drugs to meet the increasing demand of the cardiovascular patients.

Moisture uptake by some uncured adhesive films

The uptake of moisture by epoxy-based adhesives and fibre reinforced composites after cure has been the topic of many studies. The extent of moisture uptake by uncured adhesive films and composite prepregs, and the effect which this has on the performance of such systems after cure, has received much less attention. It is, nonetheless, recognised as an important consideration and most aerospace lay up facilities include controlled humidity conditions.

Distributional overlap rather than habitat differentiation characterizes co-occurrence of bivalves in intertidal soft sediment systems

Diverse species assemblages are often associated with a diversity of habitat structures. Sedimentary systems seem to be no exception, as within sedimentary systems benthic species diversity within a sample point appears to correlate with sediment grain size complexity. However, it remains to be shown whether total benthic species diversity relates to a system’s sediment heterogeneity across multiple systems. In the present paper we examined whether bivalve diversity is associated with: (1) sediment heterogeneity across systems and (2) sediment grain size complexity within systems, at 9 temperate and tropical tidal flat systems. Although bivalve life-history strategies, like post-settlement habitat selection, might suggest that sediment heterogeneity should be important for bivalve species, bivalve diversity and sediment heterogeneity were not associated across systems. Interestingly, the association between total benthic diversity and sediment heterogeneity was also not significant, suggesting that changing species composition across systems does not account for the lack of a correlation between bivalve diversity and sediment heterogeneity. Instead of habitat differentiation, bivalve diversity within a sample point was highest in ‘complex’ fine-grained sediments and bivalve distributions showed a large degree of distributional overlap in all systems. The results of this study at both smaller and larger spatial scales suggest that coexistence between bivalve species in diverse tidal flats is not associated with increased sediment heterogeneity.

Corrosion impact on drinking water distribution systems : a review and future research direction

At present water treatment and distribution is of high priority to ensure that communities have access to safe and affordable drinking water. Current information states that in the United States a total annual cost of $36 billion (US) is spent replacing aging infrastructure, lost water from unaccounted-for leaks, corrosion inhibitors, internal mortar linings, external coatings, and cathodic protection as a result of corrosion. In order to reduce the cost incurred as a result of corrosion in the water distribution industry, it is essential that better corrosion management and preventative strategies are implemented. However through investigation of research previously undertaken by others, it was found that there was a lack of study of corrosion within distribution systems in the tropics taking into account the related seasonal temperature variations. To assist in the development of management strategies to improve the outcomes of drinking water distribution systems, the authors propose to implement a pilot study involving the installation of a corrosion reactor based on standard corrosion assessment technologies in a water distribution system located in the tropics.

Performance of suspended and attached growth MBR systems in treating high strength synthetic wastewater

The performance of laboratory-scale attached growth (AG) and suspended growth (SG) membrane bioreactors (MBRs) was evaluated in treating synthetic wastewater simulating high strength domestic wastewater. This study investigated the influence of sponge suspended carriers in AG-MBR system, occupying 15% reactor volume, on the removal of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP), and compared it to that of SG-MBR. Results showed that the removal efficiencies of COD, TN and TP in AG-MBR were 98%, 89% and 58%, respectively as compared to 98%, 74% and 38%, respectively in SG-MBR. Improved TN removal in AG-MBR systems was primarily based on simultaneous nitrification and denitrification (SND) process. These results infer that the presence of small bio-particles having higher microbial activity and the growth of complex biomass captured within the suspended sponge carriers resulted in improved TN and TP removal in AG-MBR.

Observation-switching linear dynamic systems for tracking humans through unexpected partial occlusions by scene objects

This paper focuses on the problem of tracking people through occlusions by scene objects. Rather than relying on models of the scene to predict when occlusions will occur as other researchers have done, this paper proposes a linear dynamic system that switches between two alternatives of the position measurement in order to handle occlusions as they occur. The filter automatically switches between a foot-based measure of position (assuming z = Q) to a head-based position measure (given the person's height) when an occlusion of the person's lower body occurs. No knowledge of the scene or its occluding objects is used. Unlike similar research [2, 14], the approach does not assume a fixed height for people and so is able to track humans through occlusions even when they change height during the occlusion. The approach is evaluated on three furnished scenes containing tables, chairs, desks and partitions. Occlusions range from occlusions of legs, occlusions whilst being seated and near-total occlusions where only the person's head is visible. Results show that the approach provides a significant reduction in false-positive tracks in a multi-camera environment, and more than halves the number of lost tracks in single monocular camera views.

A simple-to-use calculator for determining the total solar heat gain of a glazing system

Architects and designers could readily use a quick and easy tool to determine the solar heat gains of their selected glazing systems for particular orientations, tilts and climate data. Speedy results under variable solar angles and degree of irradiance would be welcomed by most. Furthermore, a newly proposed program should utilise the outputs of existing glazing tools and their standard information, such as the use of U-values and Solar Heat Gain Coefficients (SHGC’s) as generated for numerous glazing configurations by the well-known program WINDOW 6.0 (LBNL, 2001). The results of this tool provide interior glass surface temperature and transmitted solar radiation which link into comfort analysis inputs required by the ASHRAE Thermal Comfort Tool –V2 (ASHRAE, 2011). This tool is a simple-to-use calculator providing the total solar heat gain of a glazing system exposed to various angles of solar incidence. Given basic climate (solar) data, as well as the orientation of the glazing under consideration the solar heat gain can be calculated. The calculation incorporates the Solar Heat Gain Coefficient function produced for the glazing system under various angles of solar incidence WINDOW 6.0 (LBNL, 2001). The significance of this work rests in providing an orientation-based heat transfer calculator through an easy-to-use tool (using Microsoft EXCEL) for user inputs of climate and Solar Heat Gain Coefficient (WINDOW-6) data. We address the factors to be considered such as solar position and the incident angles to the horizontal and the window surface, and the fact that the solar heat gain coefficient is a function of the angle of incidence. We also discuss the effect of the diffuse components of radiation from the sky and those from ground surface reflection, which require refinement of the calculation methods. The calculator is implemented in an Excel workbook allowing the user to input a dataset and immediately produce the resulting solar gain. We compare this calculated total solar heat gain with measurements from a test facility described elsewhere in this conference (Luther et.al., 2012).

The relationship between repeated sprint ability and the aerobic and anaerobic energy systems

A large number of team games require participants to repeatedly produce maximal or near maximal sprints of short duration with brief recovery periods. The purpose of the present study was to determine the relationship between a repeated sprint ability (RSA) test that is specific to the energy demands of Australian Rules football (ARF), and the aerobic and anaerobic energy systems. 

Coupling online control and inhibitory systems in children with developmental coordination disorder: goal-directed reaching

For children with Developmental Coordination Disorder (DCD), the real-time coupling between frontal executive function and online motor control has not been explored despite reported deficits in each domain. The aim of the present study was to investigate how children with DCD enlist online control under task constraints that compel the need for inhibitory control. A total of 129 school children were sampled from mainstream primary schools. Forty-two children who met research criteria for DCD were compared with 87 typically developing controls on a modified double-jump reaching task. Children within each skill group were divided into three age bands: younger (6-7 years), mid-aged (8-9), and older (10-12). Online control was compared between groups as a function of trial type (non-jump, jump, anti-jump). Overall, results showed that while movement times were similar between skill groups under simple task constraints (non-jump), on perturbation (or jump) trials the DCD group were significantly slower than controls and corrected trajectories later. Critically, the DCD group was further disadvantaged by anti-jump trials where inhibitory control was required; however, this effect reduced with age. While coupling online control and executive systems is not well developed in younger and mid-aged children, there is evidence of age-appropriate coupling in older children. Longitudinal data are needed to clarify this intriguing finding. The theoretical and applied implications of these results are discussed.

Optimal design of traffic signal controller using neural networks and fuzzy logic systems

This paper aims at optimally adjusting a set of green times for traffic lights in a single intersection with the purpose of minimizing travel delay time and traffic congestion. Neural network (NN) and fuzzy logic system (FLS) are two methods applied to develop intelligent traffic timing controller. For this purpose, an intersection is considered and simulated as an intelligent agent that learns how to set green times in each cycle based on the traffic information. The training approach and data for both these learning methods are similar. Both methods use genetic algorithm to tune their parameters during learning. Finally, The performance of the two intelligent learning methods is compared with the performance of simple fixed-time method. Simulation results indicate that both intelligent methods significantly reduce the total delay in the network compared to the fixed-time method.

Mitigation of N₂O emissions from surface-irrigated cropping systems using water management and the nitrification inhibitor DMPP

Soils under irrigated agriculture are a significant source of nitrous oxide (N2O) owing to high inputs of nitrogen (N) fertiliser and water. This study investigated the potential for N2O mitigation by manipulating the soil moisture deficit through irrigation scheduling in combination with, and in comparison to, using the nitrification inhibitor, 3,4-dimethylpyrazole phosphate (DMPP). Lysimeter cores planted with wheat were fitted with automated chambers for continuous measurements of N2O fluxes. Treatments included conventional irrigation (CONV), reduced deficit irrigation (RED), CONV-DMPP and RED-DMPP. The total seasonal volume of irrigation water applied was constant for all treatments but the timing and quantity in individual irrigation applications varied among treatments. 15N-labelled urea was used to track the source of N2O emissions and plant N uptake. The majority of N2O emissions occurred immediately after irrigations began on 1 September 2014. Applying RED and DMPP individually slightly decreased N2O emissions but when applied in combination (RED-DMPP) the greatest reductions in N2O emissions were observed. There was no effect of treatments on plant N uptake, 15N recovery or yield possibly because the system was not N limited. Half of the plant N and 53% to 87% of N2O was derived from non-fertiliser sources in soil, highlighting the opportunity to further exploit this valuable N pool.