Constrained coordinated distributed control of smart grid with asynchronous information exchange

Smart grid constrained optimal control is a complex issue due to the constant growth of grid complexity and the large volume of data available as input to smart device control. In this context, traditional centralized control paradigms may suffer in terms of the timeliness of optimization results due to the volume of data to be processed and the delayed asynchronous nature of the data transmission. To address these limits of centralized control, this paper presents a coordinated, distributed algorithm based on distributed, local controllers and a central coordinator for exchanging summarized global state information. The proposed model for exchanging global state information is resistant to fluctuations caused by the inherent interdependence between local controllers, and is robust to delays in information exchange. In addition, the algorithm features iterative refinement of local state estimations that is able to improve local controller ability to operate within network constraints. Application of the proposed coordinated, distributed algorithm through simulation shows its effectiveness in optimizing a global goal within a complex distribution system operating under constraints, while ensuring network operation stability under varying levels of information exchange delay, and with a range of network sizes.

The crack up

This work explored the potential for virtual, CG characters, 3D stereoscopic imagery and providing contextual imagery and text via smart device during a live performance to re-frame contemporary dance practices within a digital visual environment. The work explored the aesthetic and creative affordances of this approach. Live dancers and virtual performers were set against 3D projected landscapes demonstrating the potential of hybrid live/virtual performance. A ground-breaking interactive app enhanced the performance experience with real-time virtual landscapes. The work formed a major outcome of Discovery Project DP120101695 Building innovative capacity in Australian dance through new visualisation technologies.

The moderating influence of device characteristics and usage on user acceptance of Smart Mobile Devices

This study seeks to develop a comprehensive model of consumer acceptance in the context of Smart Mobile Device (SMDs). This paper proposes an adaptation of the Technology Acceptance Model (TAM) and the Unified Theory of Acceptance and Use of Technology (UTAUT2) model that can be employed to explain and predict the acceptance of SMDs. Also included in the model are a number of external and new moderating variables that can be used to explain user intentions and subsequent usage behaviour. The model holds that Activity-based Usage and Device Characteristics are posited to moderate the impact of the constructs empirically validated in the UTAUT2 model. Through an important cluster of antecedents the proposed model aims to enhance our understanding of consumer motivations for using SMDs and aid efforts to promote the adoption and diffusion of these devices.

Mobile technology platforms for flexible access to information resources : considerations in the use of ebook readers, smart phones, netbooks and iPads

Smart phones are everywhere, people are taking eBook readers on holiday, the iPad has queues of people wanting to buy one, and some netbooks can fit in a pocket. The technology is attractive and increasingly affordable – how can it help an individual in their access to and use of texts, journals, databases, clinical sources, the web and day-to-day information? The Library has been investigating and trialling mobile devices during 2010, and has received interesting feedback from staff and students on the effectiveness of the technology in the University and personal environments. Each device has its strengths and weaknesses depending on the needs of the individual or activity it is supporting – productivity, research, study, clinical or recreational. The presentation will explore these issues along with some of the practical implications at Deakin, and international experiences in academic environments.

A decentralised multi-agent approach to enhance the stability of smart microgrids with renewable energy

This paper presents the impact of large penetration of wind power on the transient stability through a dynamic evaluation of the critical clearing times (CCTs) by using intelligent agent-based approach. A decentralised multi-agent-based framework is developed, where agents represent a number of physical device models to form a complex infrastructure for computation and communication. They enable the dynamic flow of information and energy for the interaction between the physical processes and their activities. These agents dynamically adapt online measurements and use the CCT information for relay coordination to improve the transient stability of power systems. Simulations are carried out on a smart microgrid system for faults at increasing wind power penetration levels and the improvement in transient stability using the proposed agent-based framework is demonstrated.

Active temperature compensation for an accelerometer based angle measuring device

An angle measuring device using a high performance and very compact accelerometer provides a new and exciting method for producing highly compact and accurate angle measuring devices. Accelerometers are micro-machined and are able to measure acceleration to a very high accuracy. By using gravity as a reference these compact devices can also be used for measuring angles of rotation. The inherent problem with these devices is that their response characteristic changes with temperature which is detrimental to measurement accuracy. This paper describes an effective method to overcome this problem using a temperature sensor and intelligent software to compensate for this drift characteristic. In order to demonstrate the effectiveness of this work, experiments have been developed and conducted with the results and analysis provided at the end
of this paper for discussion.

Smart cluster bombs - control of multi-agent systems for military applications

This paper introduces an aggregation algorithm for airborne swarming guided weapon systems, which can aggregate munitions into a given shape while reaching the surface. The algorithm uses an artificial force based controller to navigate the members of the swarm into the desired geographical position and evenly distribute them inside the shape. Inter-member repulsion forces are used to avoid collisions among members, which is crucial for a weapon deployment system. Moreover, a lower bound for the release height was obtained which guarantee convergence of the complete weapon system into the target area. The proposed swarming guided weapon system was tested using computer simulations.

RFID-based real-time smart waste management system

In an environmental context, the use of RFID (radio frequency identification) and load cell sensor technology can be employed for not only bringing down waste management costs, but also to facilitate automating and streamlining waste (e.g., garbage, recycling, and green) identification and weight measurement processes for designing smart waste management systems. In this paper, we outline a RFID and sensor model for designing a system in real-time waste management. An application of the architecture is described in the area of RFID and sensor based automatic waste identity, weight, and stolen bins identification system (WIWSBIS).

A proposed smart-card solution for Australian health services : the problems encountered

This case study describes the experience of a state government health department in evaluating the use of smart card technology to redesign health benefits programs for the disabled in Australia. The social and political context of the system is explained in detail, and the potential benefits and risks accruing to the government, health care intermediaries and the community are examined.

The reality of quality systems software : working for the machine, or smart people around the machine?

This case study-based research examines the outcomes of using quality system software (QSS) in terms of the support it provides to, and the constraints it imposes on, its users. The results indicate that QSS can help facilitate knowledge access and sharing, and to a lesser extent, facilitate communication. It can be an effective mechanism for initiating and managing changes to work processes. Although some writers have opined that information technology (IT) is another way of controlling workers, this was not evidenced in this study. Technical shortcomings did hamper performance of some tasks, and for some managers, extra work was involved.

'Don't be a smart arse': Young workers, individualization, and an ethic of enterprise in Jamie's Kitchen

In Jamie’s Kitchen the high profile celebrity chef Jamie Oliver set out to transform a group of unemployed young Londoners into the enterprising, ideal worker of 21st century flexible capitalism. The paper will argue that this reality TV series provides a means to explore key features of new work regimes. We will analyse particular aspects of the increasingly powerful individualising and normalising processes shaping the lifeworlds of young workers in a globalising risk society. Processes that require those who wish to be positively identified as entrepreneurial to do particular sorts of work on themselves; or suffer the consequences.
Drawing on Foucault’s later work on the care of the self, and the  individualization theses of the reflexive modernization literature, we identify and analyse the forms of personhood that various institutions, organisations and individuals seek to encourage in young workers; and the ways in which institutionalised risk environments increasingly individualise the risks and uncertainties associated with labour market participation. The paper argues that our understandings of what it means to be a worker of the world, are being rearticulated around the idea that we are free to choose. And we must exercise this freedom – reap its rewards, carry its obligations – as individuals.

Low-flow oxygen therapy: selecting the right device

The authors provide and overview of oxygen therapy principles, describing the indications and care requirements of three low flow oxygen therapy devices and providing an algorithm for managing refractory hypoxaemia.

Extending haptic device capability for 3D virtual grasping

This paper presents an investigation into the workspace constraints observed through the use of multiple single point haptic interfaces, which lead to the design of a novel grasping device that improves upon current commercial haptic interfaces. The presented device is desktop based, and has been designed to maximise the haptic workspace while offering the ability to grasp and manipulate virtual objects, which is a function that current commercial interfaces are limited in providing. The performance of the commercial haptic interface in producing sustained effective operation and increased workspace with the attached haptic gripper is evaluated, and the improvement of both has been determined.